Bed Type Milling Machine - Horizontal

MECOF CS 105 G

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 100,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Fjlhcjymk E Ascqlegg Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 5,000 rpm, SPINDLE TAPER ISO 50 X LONG. TRAVEL MM.6000 Z SADDLE TRAVEL MM.1250 Y VERTICAL TRAVEL MM.2000 SPINDLE SPEED RPM.5000 FEEDS MM/MIN.8000 SPINDLE MOTOR POWER KW. 37 CNC HEIDENHAIN iTNC 530 REMOTE HAND WEEL FLOOR PLATES 7000x2000- 15 TON/MQ. TABLE 1080 X 7220 X H 820 MM ATC.40 Felhccswz H Rfoqljgg CHIP CONVEYOR ROTATING HEAD IN CONTINUOUS TUPC 0,001°x0,001° COOLANT THROUGH THE SPINDLE 20bar FUNCTION RTCP FPT AUTOCAL EXTERNAL COOLANT TANK HEIGH & LOW PRESSURE WITH PAPER FILTER N.2 AUTOMATIC HORIZONTAL DIVIDERS WITH 2 SUPPORT TABLES N.1 PIECE PROBE

Condition: ready for operation (used), Gear shaping machine STANKO 5M150 Max. diameter of gears that can be cut: 800 mm Max. module: 12 mm Max. cutter stroke: 200 mm Saddle indexing gear diameter: 360 mm Distance between axes (tool and table): 0-700 mm Largest tool diameter: 200 mm Cutter arbor diameter: 44.443 mm Taper: M5 Table diameter: 800 mm Distance from floor to table: 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double stroke per minute (s.p.m.): 33-188 mm Range of table feed rates per cutter double stroke: -Circular: 0.2-1.5 mm -Radial: 1-5.4 mm Fgslhsqcvkveccqlog Table rapid rotation speed: 1.7 rpm Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Dimensions: 3100x1800x3500 mm Weight: 10200 kg

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm Fslhek Dz N Ieccqlegg max turning diam 1100mm range of turning diam 460-1250mm

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Felhcceyucd Hsqljgg Only single profile grinding possible, see photo.

Condition: like new (used), Year of construction: 2020, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: XZHGB50-12050, Equipment: documentation/manual, PLEASE ONLY SERIOUS ENQUIRIES REGARDING VIEWINGS OF THE PRODUCTION LINE! WE DO NOT INTEND TO DISMANTLE THE LINE IN JANUARY; THE ADVERT COULD NOT BE PROGRESSED OTHERWISE. I am offering for sale a completely unique production line in Hungary. 1. The line manufactures trays suitable for storing 10 eggs, in either continuous or batch operation. From raw material preparation to final delivery, we are offering a complete system for sale. 2. The egg tray production line is located in Bátonyterenye, where a fully serviced industrial site provides all the infrastructure necessary for production. 3. The total output of the line is sold on the domestic market. The complete egg tray production line consists of several units: - Material preparation system, which processes waste paper into mouldable raw material. - HGHY egg tray forming unit, which finalises the trays by drying and hot-air pressing after moulding. - Palletising system, which makes the finished trays ready for transportation. Fgelhccsya Eh Eeqlog - Auxiliary systems for air, vacuum, power, gas, and water supply.

Condition: ready for operation (used), Year of construction: 1998, table mounting size: 765 x 400 mm movements x/y/z: 650/410/510 mm spindle taper: BT 40 min./max. distance table/spindle: ca. 90/690 mm spindle turning speed range: 80 - 8000 rpm number of tool positions: 20 pieces carriages: ca. 30 m/min rapid move: ca. 30 m/min electrical connection: 380 V, ca. 15 kVA kW space needed: 2300 x 2100 x 2650 mm weight: 4000 kg Felhcetwy Diocqlegg

Condition: excellent (used), Year of construction: 1995, Maximum center height: 330 mm Maximum distance between centers: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse rate X/Z axis: 10/10 m/min Turret: Number of tool positions: 12 Of which, driven tool positions: 6 Cylindrical shank tool holder: VDI 50 mm Dimensions / Weight: Footprint L x W x H: approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special features: • CNC control system HEIDENHAIN TurnPlus EP 90 with color screen • Spindle orientation C-axis • 12-position turret, VDI 50, of which 6 positions with driven tools, manufacturer SAUTER DIN 5482 B 20x17, max. speed 3000 rpm. • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic steady rest with follower device • Hydraulic quill actuation • Air extraction system, manufacturer LTA • Various tool holders VDI 50 • CE compliant Fgelhccex Sx Htjqljg In 08/2025, GILDEMEISTER Service replaced the following parts: 1 servo motor, 1 AC servocontroller inverter power module for 2 axes, 1 power module Simodrive, 1 rectifier/inverter module, 1 control unit for 1 axis, 1 control module for 2 axes inverter servo drive, 1 Simodrive power module (1-axis motor) Total repair costs: 17,000.00 EUR net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2014, Siemens 840 D Swivelling control panel including SIEMENS 840 D Solution Line control system. Travel X axis: 8000 mm Travel Y axis: 1300 mm Travel Z axis: 2200 mm Tool system: SK 50; Capto C8 Main spindle: 20–4000 RPM 3D volume model of the machine HEIDENHAIN measurement system on all axes. Automatic central lubrication with pressure and time monitoring for all axes and moving components. Measuring probe system RENISHAW RMP60 M Tool breakage detection via probe BRANKAMP CMS collision monitoring with two measuring channels: Center height, Fibro rotary clamp: 1100 mm Folhccjw Syv Ujqljgg Center width, Fibro rotary clamp: 900–3000 mm Max. swing diameter, Fibro rotary clamp: 2200 mm Fibro rotary table D=1600; 250 RPM Carousel rotary table FIBRODYN 1600 mm: Table surface 6000x2000 mm d’Andrea facing slide Universal milling head Automatic tool changer ATC, 80 tool magazine slots in M version: 3 milling head slots High-pressure pump 30 bar Operating hours: 4261 h

Condition: excellent (used), mileage: 493 km, power: 368 kW (500.34 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, operating hours: 1 h, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Power-assisted brakes - Low noise - Speed limiter - LED lights - Alloy wheels - Air horn - Particulate filter - Side skirts - Sun visor - Stability control - Power Take-Off (PTO) = Additional Information = Transmission Gearbox: I-Shift, automatic Axle Configuration Front axle 1: Alloy wheels; Steering Front axle 2: Alloy wheels; Steering Rear axle 1: Twin tires; Alloy wheels Rear axle 2: Twin tires; Alloy wheels Weights Unladen weight: 21,160 kg Functional Mast: Telescopic (8 sections) Mast length: 22 m Lifting capacity: 18,000 kg Lifting height: 2,200 cm Crane: HIAB X-HIPRO 548 E-8, mounted behind the cab Body manufacturer: HIAB X-HIPRO 548 E-8 CE mark: yes Condition Technical condition: very good Visual condition: very good NEW VOLVO FMX 500 8X4 WITH HIAB OPT25S56 ROLL-OFF TIPPER + HIAB X-HIPRO 548 E-8 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X4 AP AXLES LEAF SUSPENSION WHEELBASE 510 CM NEW FMX MODEL CAB WITH AIR CONDITIONING AUTOMATIC GEARBOX WITH ENGINE BRAKE ALCOA WHEELS HIAB 25 TON ROLL-OFF TIPPER TYPE: OPT25S56 ADJUSTABLE UNDER-RUN PROTECTION HIAB X-HIPRO 548 E-8 CRANE 8X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5TH AND 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 18,000 KG MAX WORKING HEIGHT 2,200 CM MAX LIFTING CAPACITY AT 1,960 CM 1,720 KG 4X OUTRIGGERS NEWLY FITTED UP TO 2023!!! 2 AVAILABLE FROM STOCK Foljuxviqjhccqlogg FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH