MEP TIGER 352 NC 5.0 Circular saw
MEP TIGER 352 NC 5.0

Condition

New

Location

Böblingen

MEP TIGER 352 NC 5.0 Circular saw MEP TIGER 352 NC 5.0

Show map

Machine data

Machine type:: MEP TIGER 352 NC 5.0 Circular saw

Manufacturer:: MEP

Model:: TIGER 352 NC 5.0

Condition:: new

Price & Location

Location:: Otto-Lilienthal-Straße 36, 71034 Böblingen, Deutschland

Call

Details about the offer

Listing ID:: A2300099

Update:: 26.03.2025

Description

MEP TIGER 352 NC 5.0 [Fully automatic]
Article number TI352NC
motor power 3,0 kW
belt opening 190 mm
belt dimensions 350x32x2,5
weight 680 kg
Speed 15 - 90 m/min.
Cutting surface 0° 115 / 95 / 180x95
Cutting surface 45° right 110 / 95 / 125x95
Cutting surface 45° left
Cutting surface 60° right
Cutting area 60° left
Description
Electro-pneumatic, vertical, linearly guided automatic saw for the use of HSS saw blades to make serial cuts from 60° left to 45° right on steel.
The machine also works in semi-automatic cycle. CNC automatic machine with multiprocessor and two axes controlled by MEP control, latest generation, which allows to program 1000 different cutting programs, each with different cutting length and number of pieces, for the same material thickness.
FEATURES:
-New centralized control panel on articulated arm to allow operators to easily reach the emergency stop switch from any working position.
-NEW: Fieldbus communication system (Modbus protocol) with double microprocessor and serial port.
-Display with 20 characters x 4 lines for displaying the following technical parameters: + saw band speed + number of cuts programmed and executed + saw band thickness + feed length + cutting time + ammeter + display of over 100 diagnostic messages and warnings.
-NEW: Display and recording of the alarm and error messages with the possibility of displaying the incidents that have occurred.
Ksdpfx Aechhhdjgzsnf
-NEW:

The listing was translated automatically. Translation errors are possible.

Documents

2300099-01.pdf

Seller

Registered since: 2002

156 listings online

Call

Send inquiry

Telephone & Fax

+49 7033 ... show

These listings may also fit your interest.

Listing

Cold Circular Sawing - Automatic MEP TIGER 352 NC 5.0

Remseck am Neckar

7,950 km

Cold Circular Sawing - Automatic
MEPTIGER 352 NC 5.0

Call

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material Ksdpfx Agjfg Rlcjzenf thickness different cutting programs, each with a different cutting length and number of pieces program.

See details

Listing

Gear Testing Machine OERLIKON-KLINGELNBERG R30

Hilden

7,668 km

Gear Testing Machine
OERLIKON-KLINGELNBERGR30

Call

Year of construction: 2007, condition: used, max. wheel diameter 400 mm Knsdpfxogr Hars Agzsf gear width - mm max. module - workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

See details

Listing

Coordinate measuring machine Mitutoyo Crysta Apex C9206

Wolkersdorf im Weinviertel

8,404 km

Coordinate measuring machine
MitutoyoCrysta Apex C9206

€25,000

FCA ONO plus VAT

Call

Condition: refurbished (used), Year of construction: 2004, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 600 mm, Mitutoyo CMM Crysta Apex C9206 Measuring ranges 900x2000x600mm Accuracy 1,7 + 3L/1000µm Slightly damaged V-Axis covers (will be replaced or delivered without) Software MCOSMOS-1 V3.5, Windows 10 PC or selectable upgrade to: - Mitutoyo MCOSMOS 4.2 incl Geopak & MCAT1000S or new license - EasyCMM I++ Server plus Inca Professional Probe Renishaw PH10T with either: - Renishaw Touch probe TP200 - Renishaw Touch Probe TP20 Selectable options: - Scanning Probe Renishaw SP25 with PH10M - Probe Change Racks - New PH10M+ Head and Probe (upgrade) - MCOSMOS Offline license MCAT1000P - Bilz Pneumatic Vibration Damping System on demand Installation & Calibration (plus additional travel expenses) Kedpfx Agsf S Tmvszenf Including 3 Month Warranty (excl. travel expenses)

See details

Listing

CNC Turning & milling machine SCHAUBLIN 140R

Schweiz

8,020 km

CNC Turning & milling machine
SCHAUBLIN140R

Call

Listing

Gear hobbing machine Gleason-Pfauter PE300

Barßel

7,596 km

Gear hobbing machine
Gleason-PfauterPE300

€40,000

ONO plus VAT

Call

Condition: good (used), Year of construction: 1987, operating hours: 2,685 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, total length: 5,235 mm, total height: 3,045 mm, total width: 3,990 mm, spindle speed (max.): 640 rpm, spindle speed (min.): 55 rpm, overall weight: 11,000 kg, Equipment: documentation/manual, Gear cutting machine Pfauter PE 300 Model: SK07E 20100 Control: Sinumerik System 3 Fully functional machine, which was completely overhauled just a few years ago. Investments made: Knedpfxsw Dcx Rs Agzef - Overhaul including milling head (2021) approx. €70,000 - All hydraulic hoses renewed (2021) approx. €3,500 - New oil mist separator (2021) approx. €5,000 Numerous tools and clamping devices available, see pictures and attachment.

See details

Listing

Wasbek

7,654 km

Tool Grinder - KSM 13
KnuthKSM 13

€266

fixed price plus VAT

Call

Condition: new, The KSM 13 Tool Grinder from KNUTH is a compact and efficient solution for precise and cost-effective grinding of double-edged twist drill bits within the Tool Grinders category. This handy device offers simple operation, allowing users, even without prior knowledge, to achieve clean and precise results quickly. The KSM 13 features a motor rating of 0.12 kW and accommodates grinding diameters from 3 to 13 mm, making it versatile for various drilling needs. With included grinding wheels and common collets, it simplifies the process of chamfering the relief angle and point angle while ensuring optimal chip removal during the grinding path. This robust tool is an ideal addition to any tool crib, enhancing your grinding capabilities. Don't miss out on improving your tool maintenance; request a quote or buy now to obtain this indispensable tool grinder. Kedenh Nu Uepfx Agzjnf

See details

Listing

Belt annealing furnace Industrieofen- und Anlagenbau GmbH DOBES 5 0,7 30-11-0

Bad Königshofen im Grabfeld

7,927 km

Belt annealing furnace
Industrieofen- und Anlagenbau GmbHDOBES 5 0,7 30-11-0

Call

Year of construction: 2021, condition: like new (used), Continuous belt annealing furnace electrically heated. The unit is equipped with high quality components and is in mint condition. The furnace is pleased to be inspected at any time. The plant is not completely assembled at the moment. For further information we are pleased to be at your disposal. Annealing furnace suitable for annealing of small parts (Steel parts) with cooling zone at the outlet. Throughput capacity: 100 kg/h temperature max.: 1100°C depending on the weight of the piece, the throughput speed of the volume and single- or multi-layer charging. Pouring height max.: 40 mm Throughput height max.: 60 mm Furnace time adjustable: 200-30 mm/min Total length of the plant approx. 11000 mm Total width of the plant approx. 1750 mm Total height of the plant approx. 2320 mm Total heating capacity: 81 kW Heating zones: 3 Heated length: 3000 mm Cooling zone length: 2500 mm Knedpfoha T Ipjx Agzsf belt width: 500 mm Temperature accuracy +/- 2°C Cooling zone fans 2 pcs. Furnace gassing: nitrogen/hydrogen or nitrogen only Offer without charging!

See details

Listing

Velen

7,625 km

Cold Circular Saw
MEPTIGER 372 SX EVO

Call

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 15 - 150 U/min total power requirement 5,5 kW weight of the machine ca. 0,615 t dimensions of the machine ca. 1,4 x 1,4 x 2,0 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. Basic equipment: Knodpfxofg Rldj Agzsf Saw head slides on recirculating ball linear double guides Three-stage gearbox continuously variable speeds 15-150 rpm Vice opening 190 mm Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material Pneumatic vertical vice Saw blade HSS DMO 5 Æ 370x32x3 for solid and profile material Vise with counter-clamping device for double workpiece clamping Base with removable coolant tray Chip clearing brush Length stop for cuts of the same length Material support arm, at the same time connection option for roller conveyor/ loading side

See details

Listing

Conventional Horizontal Lathe - Turnado 230/2000 Knuth Turnado 230/2000

Wasbek

7,654 km

Conventional Horizontal Lathe - Turnado 230/2000
KnuthTurnado 230/2000

Call

Condition: new, The Turnado 230/2000 is a versatile and robust Conventional Horizontal Lathe from KNUTH, designed for various machining needs within the Engine Lathes product group. This modern version of the classic lathe features a heavily ribbed machine bed and a powerful main motor, providing high torque and a wide range of spindle speeds. It includes essential accessories such as a 3-jaw lathe chuck, a 4-jaw independent chuck, and an integrated coolant system, making it efficient for operational tasks. The user-friendly control panel ensures easy operation, while the high-quality spindle support delivers precision even under heavy loads. With a maximum workpiece length of 2,000 mm and a turning diameter of 460 mm, this machine is built to offer lasting high value and high productivity. You can request a quote to enhance your machining capabilities with the Turnado 230/2000, your ideal choice in the Conventional Horizontal Lathes category. Knjdpfx Agop Ebgrozof

See details

Listing

Fully automatic band saw machine Macc SPECIAL 390 A

Bopfingen

8,017 km

Fully automatic band saw machine
MaccSPECIAL 390 A

Call

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering Knedpfx Agefww Sqszef until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

See details

Advertise here