Performed with multiple cross. Before

MS- Maschinenbau MAS

Year of construction: 2024, condition: new, - 6.000mm cutting length - min. cutting length 600mm - 5 saw supports - 80 - 140 mm cutting height - 4 KW saw motor - 1,5 KW stepless feed 10-30m/min Hfodpfx Aspfcgajd Djp Optional - Disposal conveyor belts

Condition: reconditioned (used), Year of construction: 2022, EWD WD frame saw system Type GUS 71 oscillating frame saw, overhauled in 2022, consisting of: Hydraulic quick-clamp carriage H 32 III with auxiliary carriage H 25 V Oscillating frame saw GUS 71: Frame size 710 x 710 mm. Stroke 500 mm. Speed 310 rpm. Fully hydraulic with oscillating frame and automatic overhang adjustment. Hydraulic saw tensioner. Saw blade hanger Jansen No. 10, insertion lugs. Motor and speed reducer. Electrical control cabinets and operator panels. Splitter wedge S 3 G with pressure rollers and spring-loaded flaps. Hfsdpow Agtiofx Ad Dop Rails for clamping carriage. Saw system was overhauled in 2022 and not installed. The saw fits onto the base plate of WD/GXW/GXV etc.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 1,800 mm, turning diameter: 2,000 mm, turning length: 8,000 mm, total length: 12,000 mm, overall weight: 29,500 kg, Machine can be inspected under power Hfsdpfswv S D Hox Ad Dop

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: et50-neu-löwa, this underground storage tank can be used to hold non-drinking water for the fire department or to retain rainwater to water for instance your sports ground Hjdpfod Tmaqsx Ad Defp

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Hjdpfxsdy Hm No Ad Defp Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: excellent (used), for ESTERER DKL or DKN Spacer rings in various widths, 85 mm bore with 2 keyways, movable saw bush with left-hand thread, hard chrome-plated CV circular saw blades 450 Ø x 85 Ø and 500 Ø x 85 Ø, 1 tension spanner for saw bushes Hsdpfeh Anxdsx Ad Djfp

Condition: excellent (used), Year of construction: 1997, High-Performance 3-Bed CNC Lathe Manufacturer: Gurutzpe – Spain Model: B 1400/3 x 8000 Year of manufacture: 1997 Control: NUM Max. swing diameter over bed: 1,420 mm Center height: 710 mm Max. turning diameter over cross slide: 1,150 mm Max. turning length: 8,000 mm Chuck spindle power: 75 HP Chuck speed: up to 600 rpm (4-speed gearbox) Chuck torque: 16,000 Nm Rapid traverse X/Z: 5,000 mm/min X-axis travel: 850 mm Z-axis travel: 8,000 mm Turret with automatic 4-position changer Max. workpiece weight without steady rests: 14,000 kg Hfsdpfow Snu Eex Ad Dop with 1 steady rest: 17,000 kg, with 2 steady rests: 19,000 kg Machine equipment: – 1 x travelling steady rest – 2 x fixed steady rests – 1 x chip conveyor

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Pallet length max. 4500 mm Pallet width max. 2250 mm Hjdpjvvutxofx Ad Defp 20 nail feeders 19 nail hammers Hydraulic motor 15 kW

Condition: new, saw blade diameter: 1,000 mm, drive type: Elektro und Zapfwelle, The 40/20 CD+E saw-splitting machine cuts the log with a diameter of max. 40 cm with a circular saw blade and splits it with a splitting force of 20 tons. It is a combination machine (electric and PTO connection) Hedpfx Adevukuio Dsfp Demonstration and viewing possible by appointment - machine is currently in stock, available immediately

Condition: excellent (used), Year of construction: 2023, operating hours: 557 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 800 mm, table width: 420 mm, overall weight: 1,370 kg, table load: 400 kg, Equipment: documentation/manual, DECKEL FP3 – fully overhauled by the FPS Werkzeugmaschinen specialist workshop in Germany. Top condition with CE-compliant modernization. MANUFACTURER: DECKEL MODEL: FP3 OPERATING HOURS: 557 h CONDITION: Fully overhauled (2023) – mechanically and electronically as-new! LOCATION: Graz (Austria) IMAGES/VIDEOS: For photos and videos of the machine, please contact us upon request. Description: This high-quality DECKEL FP3 milling machine has been completely refurbished, mechanically and electronically upgraded to the latest state of the art, and complies with all current CE and BGVA 3 / DIN-EN 60204-1 regulations. As part of the modernization, a new touch-safe control cabinet was installed and a new brake motor fitted – ensuring immediate spindle stop when the brake is engaged. The machine is in as-new technical and visual condition and delivers maximum precision, reliability, and durability – ideal for toolmaking, prototyping, repair workshops, or training facilities. Technical Data Hfedpfsuhhm Rox Ad Dsp Operation: Manual, with the option for automatic positioning. Display: 3-axis digital readout (Heidenhain) Speed range: 40 – 2000 rpm (stepped, 18 gearbox speeds) Feed rate: 10 – 500 mm/min (stepped) Rapid traverse: 1.5 m/min Quill: Vertically & horizontally extendable 100 mm, SK40 (S20×2 or M16 drawbar thread) Axis travel (X/Y/Z): 500 / 300 / 400 mm Table size: 800 × 420 mm Max. table load: 400 kg Equipment: Vertical and horizontal spindle Manually swiveling milling head ± 90° Completely new electrics & drive units Fully overhauled – as-new mechanical & electronic condition Extras: Central lubrication Chip tray Z-axis bellows Machine lamp Universal table / rotary table / dividing head / tailstock Slotting head Special paint finish Highlights: New CE-compliant control cabinet (BGVA 3 / DIN EN 60204-1) New brake motor – immediate spindle stop Heidenhain digital display for precise operation Note: Purchase price after overhaul in 2023 was €95,000. Contact us to arrange a viewing appointment.