Used 3D Printer for sale (3,712)

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Nwsdpfx Aeww Ivnjg Isc

Condition: used, functionality: fully functional, machine/vehicle number: SG76G34001, Year of construction: 2017, operating hours: 11,062 h, Trindo Digitalmanufaktur GmbH is offering a well-coordinated production system from the HP Multi Jet Fusion series for sale. The system is designed for industrial multi-shift operation and has been consistently maintained. System Components: • 1x HP Jet Fusion 4200 Printer (M0E85A) • 1x HP Jet Fusion Processing Station (M0E89A) with fast cooling function • 3x HP Jet Fusion Build Units (M0E92A) for maximized throughput Service & Maintenance Status: Active 3daas Contract: The machine is currently under an active HP Service Agreement (3D-as-a-Service). Advantage for Buyer: Since the system has been continuously maintained by HP, the normally costly and time-consuming manufacturer recertification upon transfer or relocation is not required. Condition: Fully operational. All wear parts have been regularly replaced by certified technicians as part of the service agreement. Production Capacity: Nsdpfx Agoyiz Nqo Iowc Thanks to the inclusion of three build units, the system is optimized for high-throughput operation. This allows for simultaneous workflows: • Printing process (Build Unit 1) • Cooling phase/unpacking in the processing station (Build Unit 2) • Cleaning and refilling/setup (Build Unit 3) Handover Terms: Location: Munich (Trindo Digitalmanufaktur GmbH) Documentation: Maintenance records and operating hours can be viewed upon legitimate interest. Inspection: An on-site demonstration of the system during operation is possible by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 2,974 h, total length: 730 mm, total height: 1,350 mm, total width: 480 mm, overall weight: 85 kg, input voltage: 240 V, input current: 2 A, input frequency: 50 Hz, space requirement length: 730 mm, space requirement height: 1,350 mm, space requirement width: 480 mm, The envisiontec Perfatory III MiniMultilens with two interchangeable lenses is renowned for its precision, smooth surfaces, and fine details when used with various resin systems. It is a true professional machine for the highest quality demands. The interchangeable lenses result in the following build volumes: - f60: 84x63x230mm with native XY resolution of 60µm and ERM of 30µm Nwjdpfxox Rb Iwe Ag Iec - f85: 44x33x230mm with native XY resolution of 32µm and ERM of 16µm Z resolution: 20-150µm depending on the material/resin Light ranges: UV (

Year of construction: 2012, condition: ready for operation (used), There are three Concept Laser M1 3D printers available, year of construction machine 1/ 2/ 3: 2009/ 2010/ 2012, operational hours counter machine 1/ 2/ 3: 82,046/ 93,781/ 68,167h, with Laser Rofin StarFiber 200, water cooling, screening machine and documentation, at machine 1 the laser is broken and the machine is without optics, machine 2 is fully functional, machine 3 is fully functional, but a machine software error occurs regularly, which has to be fixed, afterwards production can always be continued, an inspection is possible, Njdponr Nr Hefx Ag Iowc

Condition: used, functionality: unexamined, machine/vehicle number: EVO-lizer A4, Year of construction: 2015, operating hours: 4,413 h, total length: 720 mm, total height: 720 mm, total width: 540 mm, type of input current: AC, overall weight: 64 kg, input voltage: 230 V, input current: 4 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.05 mm, table width: 270 mm, tank capacity: 11 l, table length: 195 mm, noise level: 46 dB, number of print heads: 2, Used FDM 3D Printer EVO-lizer A4 Device Data: Printer dimensions (W x D x H): 540 x 720 x 710 mm Weight: 64 kg Connection data: 230 VAC; 50/60 Hz; 4A Ambient temperature: 15 – 35 °C Ambient humidity: 30 - 70 % Acoustic Data: Idle mode: 40 dBA Operating mode (1 m distance): 46 dBA Operating mode (40 cm distance, door open): 62 dBA Technical Data Sheet: Print bed size (W x D x H): 270 x 195 x 205 mm Minimum layer thickness: 0.10 mm Positioning accuracy: 0.05 mm Nozzle temperature range: 160 – 260 °C Print bed temperature range: 30 – 100 °C Filament material: ABS, PLA Nwsdpfsxu I R Dsx Ag Iec Filament diameter: 1.75 mm Software/slicing program: EVO-lizer

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Nodpfeibikwox Ag Iewc Four material-dryer are included in the delivery, Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 2,128 mm, total width: 1,294 mm, input voltage: 400 V, warranty duration: 6 months, input current: 32 A, laser power: 100 W, tank capacity: 32 l, volume flow: 20 m³/h, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Nwodpfx Aeqwkypog Iec

Condition: not inspected (used), functionality: unexamined, Year of construction: 2020, total length: 900 mm, total height: 1,900 mm, total width: 1,200 mm, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, input current: 13 A, temperature: 420 °C, ambient temperature (min.): 20 °C, ambient temperature (max.): 40 °C, positioning accuracy: 0.02 mm, electrical fuse: 16 A, table width: 500 mm, table length: 400 mm, noise level: 62 dB, For sale is an EVO-Tech EL-102 – an industrial FFF/FDM 3D printer (filament) designed for reliable operation in prototyping, as well as single part and small batch production. The system is engineered for reproducible printing conditions and is equipped with features such as integrated material drying and a heated build chamber, ensuring process-stable results – especially when processing technical thermoplastics. Nwjdpoyh Ratjfx Ag Isc - Print size: 500 × 400 × 510 mm - Build volume: 102 liters - Weight: 400 kg - Noise level: 62 dB - Positioning accuracy: 0.02 mm - Layer thickness: 0.10–0.75 mm - Nozzle diameter: 0.2 – 0.8 mm - Number of extruders: 2 (independently on one axis) - Print bed temperature: 200°C - Build chamber temperature: 100°C - Nozzle temperature: 420°C - Ventilation: Exhaust via activated carbon filter - Minimum wall thickness: 0.3 mm - Power consumption: 240–4500 W - Spool size: up to 10 kg - Vacuum clamping table - Integrated material drying for consistent material quality throughout the process The system has been unused in the facility for one year and is therefore being sold as untested.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 031223510029, Year of construction: 2024, operating hours: 573 h, total length: 650 mm, total height: 1,200 mm, total width: 610 mm, type of input current: AC, overall weight: 145 kg, input voltage: 230 V, input current: 8 A, For sale: A virtually unused SINTERIT Lisa X SLS 3D printer, operated for only 573 hours. The set includes: - Sinterit LISA X 3D Printer - Sinterit Studio Advanced ("slicer") - Flight Case for LISA X Technical Advantages: Nsdpfswi Sivsx Ag Iewc Exceptionally fast printing, with speeds of 10-14 mm/h, allowing a full bed with complex shapes to be printed in just 34 hours. Larger build volume with a bed size of 180 x 130 x 330 mm. Wide range of materials, from highly durable and flexible options to specialized materials like ESD powder. High print quality with fine details. Open environment with over 50 adjustable printing parameters, enabling flexible management and the use of external materials. We Offer: Option for personal handover in the Czech Republic or professional shipping internationally. 14-day money-back guarantee and the possibility of a test print. 500 EUR discount for quick closure within 7 days. Contact us for more details or to arrange a viewing!

Condition: excellent (used), Year of construction: 2014, 2014 EOS M280 Industrial 3D Metal Printer with Low laser hours and accessories Nwedpjyif Afsfx Ag Ijc Last maintenance completed in October 2025, the laser source still delivers a maximum output of ~400 W. Since the last maintenance, it has printed less than 200 hours. Total estimated laser hours are ~17,500. Building Volume 250 x 250 x 325 mm (9.85 x 9.85 x 12.8") (Height Includes Build Plate). Laser Type YB Fibre Laser 400W. Precision Optics F-Theta Lens, High Speed Scanner. Exposure Speed Up To 7,000m/s (23 ft/s). Repeatability, Scanner Position < 11 µrad. Diameter Of Laser Beam At Building Area (Variable) 100-500µm. Mains Supply (3 Phase System) 400V +6 %/-10 % At 50/60 Hz. Mains Fuse Protection 3 x 32A. Maximum Power Consumption (Incl. Cooler) 5.5kW. Compressed Air Supply 7,000 hPa; 20 m³/h. Argon Supply 4,000 hPa; 100 l/min Or Nitrogen Generator Integrated Into The Machine. Min. Argon Purity 99.998% Argon (Argon 4.8). Comfort Module & User Manual Included. Software License For Inconel 718 (IN718_040_210_Performance [CODE:30046]). S/No. SI1799. The final sale price on Lot 1 will include the cost of decommissioning by OEM, and loading to buyers vehicle. Buyer will be responsible for securing the machine to vehicle. With Chiller Unit, Manual Lifter SWL 150kg, 12 Suspended Particle Filter H13, 457 x 457 x 150mm– EOS Art. Nr. 9042-0080 & 6 Fine Particle Filters F9, 457 x 457 x 292mm – EOS Art. Nr. 9042-0079. Overall Dimensions W2,200 mm x D1,070 mm x H2,290mm. Approx Weight 1,250kg (Without Powder).

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 140L-C, Year of construction: 2022, operating hours: 5,854 h, total length: 1,450 mm, total height: 1,040 mm, total width: 1,250 mm, type of input current: AC, overall weight: 380 kg, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, electrical fuse: 16 A, table width: 500 mm, tank capacity: 140 l, table length: 700 mm, power: 8.3 kW (11.28 HP), travel speed (max.): 24,000 mm/min, number of print heads: 2, Refurbished Industrial Fused Filament Fabrication (FFF) Printer Includes: - 140L-C printer - Vibration-damped platform - License for slicing software (Simplify3D) Original price €73,800 Nwodpfx Agsxuh Nys Isc General Technical Data: Model: HAGE 3D-140L-C Year of manufacture: 2022 Operating hours: 5,854 h Printing technology: FFF (Fused Filament Fabrication) Filament diameter: 1.75 mm; open material system (not limited to specific manufacturers) Build area (L x W): 700 mm x 500 mm Maximum print height: 400 mm Maximum build volume: 140,000 cm³ Dimensions and Weight: Length: 1,450 mm Width: 1,250 mm Height: approx. 1,040 mm Weight: approx. 380 kg Temperature: Maximum printhead surface temperature: 300°C (optionally 450°C) Maximum build plate surface temperature: 180°C Maximum chamber temperature: 85°C Minimum operating temperature: +10°C Maximum operating temperature (ambient): +40°C Electrical Data: AC input: 400 V / 50 Hz Power supply: 24 V DC Connection: USB 3.0 / Ethernet Print Specifications: X-axis speed: up to 400 mm/s Y-axis speed: up to 400 mm/s Z-axis speed: up to 300 mm/min XY-plane print accuracy: < 0.1 mm Printer Control: Industrial controller (Sigmatek) Software: HAGE3D All documentation available Platform: 1,450 x 1,250 x 600 mm (LxWxH) Including storage compartments Including machine feet with vibration damping

Condition: like new (used), functionality: fully functional, machine/vehicle number: 3009F484403, Year of construction: 2022, operating hours: 217 h, We are offering this 3D Systems ProJet2500 3D printer, manufactured in 05/2022, for sale. Nodsyfv Dbspfx Ag Ijwc With only 217 printing hours (8 kg material), the printer is almost like new. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), machine/vehicle number: L0319, Year of construction: 2014, operating hours: 15,500 h, The Fortus 900mc 3D Printer is one of the most precise and powerful FDM printers on the market. With the largest build size among all Fortus® systems, this 3D printer is designed to meet the most demanding manufacturing requirements. The build volume of the Fortus 900mc by Stratasys measures 914.4 x 609.6 x 914.4 mm, covering a wide range of 3D printing applications. The selectable layer thicknesses of 0.178mm, 0.254mm, 0.330mm, and 0.508mm allow for precise adjustments to suit your specific part requirements. For optimal operation of this Stratasys 3D printer, an additional washing station is needed. The Stratasys Fortus 900mc uses the soluble support material SR30 or a Break-Away support material, enabling the creation of intricate models, including undercuts and holes, while reducing the need for post-processing. The FDM 3D printer Fortus 900mc works seamlessly with the popular, free GrabCAD software, making it accessible even for inexperienced users to swiftly and easily fabricate their projects. Make the most of this Stratasys FDM 3D printer model with iSQUARED materials such as ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, and ULTEM 1010. The cartridges for building and support materials each hold either 1510 cm³ or 3020 cm³, ensuring uninterrupted printing. This printer can be installed anywhere without the need for specific setup conditions. No special ventilation is required, as the Fortus systems do not produce harmful vapors, chemicals, or waste. Nwsdpfx Ajvmph Ejg Ijc Download the provided site preparation guide to understand the space and connection requirements of the Stratasys Fortus 900mc. This printer is part of the Certified Pre-Owned (CPO) program. Certified Pre-Owned 3D printers are used 3D printers that have been fully refurbished, serviced, and then verified through a 24-hour test print by our experts. If you opt for installation and training by one of our certified service technicians, you will also receive a 6-month warranty on your 3D printer. Additionally, we can provide you with all the accessories and consumables, tailored to your purchased 3D printer, from a single source. This means that you take no risks with your purchase.

Condition: like new (used), functionality: fully functional, machine/vehicle number: D32070, Year of construction: 2021, operating hours: 41 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: DC, overall weight: 227 kg, input voltage: 220 V, Equipment: CE marking, For sale: Stratasys F370 (F123 Series) FDM Printer + SCA 3600—perfect for reliable, office-friendly production of functional parts, jigs & fixtures, and engineering prototypes. Package includes a substantial assortment of new, unopened consumables and print heads, as well as a Stratasys SCA 3600 support removal tank—allowing immediate, long-term operation. Key Features - Technology: FDM with soluble QSR support - Build Volume: approx. 355 × 254 × 355 mm (14 × 10 × 14 in) - Supported Materials (depending on print head): PLA, ABS, ASA, elastomers, ABS-CF10 - Supports soluble support material removal (NaOH/QSR) Includes (ALL supplied with the printer): Support Removal / Chemistry - 7× Stratasys sodium hydroxide (NaOH) boxes, ref 300-00600 Nsdpfxjxk Tbge Ag Iowc - 1× QSR soluble support spool - 1× Stratasys SCA 3600 support removal tank Material Spools (all new) - 7× PLA Translucent - 1× PLA Light Blue - 1× ASA Yellow - 1× ABS Black - 1× ABS Yellow - 1× ABS Ivory Build Trays - 6× Standard build tray cartons - 1× High-temperature build tray carton Print Heads (all new) - 7× PLA Cooling heads - 4× PLA Extrusion heads - 4× Support/Model heads - 1× Elastomer head - 1× ABS-CF10 head Also included - Original accessories and cables - [User manuals / maintenance kit / crate—if applicable] - Test print prior to collection possible Logistics - Inspection: By appointment - Shipping: Palletized shipping available at buyer’s expense, or local collection possible - Payment: Bank transfer (invoice provided) Why choose this unit? A meticulously maintained F370 supplied with a rare, extensive set of build trays, print heads, and materials—covering PLA, ABS-CF10, elastomers, and more—plus the SCA 3600 tank for efficient soluble support removal. Minimize downtime and consumables lead time from day one.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,845 h, This KEYENCE Agilista-3200W was manufactured in 2016. It includes Modeling Studio software, printer setup materials, side covers, and an AC power cable. Ideal for those looking to enhance their 3D printing capabilities. Contact us for more information. Nsdpfsx Stldox Ag Iowc Application Types 3D Printing

Condition: repair required (used), functionality: fully functional, machine/vehicle number: 8500243, Year of construction: 2017, total length: 1,400 mm, total height: 1,100 mm, total width: 1,260 mm, type of input current: AC, overall weight: 430 kg, input voltage: 230 V, input current: 13 A, input frequency: 5,060 Hz, ambient temperature (min.): 18 °C, ambient temperature (max.): 25 °C, With the Stratasys J750/J735 3D printers, you can streamline and reduce the cost of producing models from different materials on the same build tray in the same print job. The J750/J735 3D printers allow you to assign colors to parts of a model at the design stage (using CAD software), save the model as a VRML file, and have the model printed in the desired colors. The Stratasys J750 has a build area of 490 x 390 x 200 mm (19.3 x 15.35 x 7.8 in). Spare parts and materials are available. Nedpfsvu Riajx Ag Iowc The machine has only been used internally, primarily for product development.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 270047, Year of construction: 2015, operating hours: 1,514 h, The Stratasys Objet260 Connex 3 is a state-of-the-art 3D printing solution that brings your creative ideas to life. With its advanced technology, it enables the precise production of complex and detailed models and prototypes. A standout feature of this impressive machine is its digital printing mode, which gives you even greater freedom in the design and realization of your projects. The technology of the Stratasys Objet260 Connex 3 is based on the PolyJet process, which delivers high-precision results with exceptional surface quality. It is possible to print models with a layer thickness of 30 µm or 16 µm. This gives you the choice between maximum resolution or maximum speed. In both modes, PolyJet technology allows you to print intricate models with fine details. With a build envelope of 255 x 252 x 200 mm, the Objet260 Connex 3 allows you to create a variety of complex and detailed models in a single print session, saving time and effort. The operation of the Stratasys Objet260 Connex 3 is simple and user-friendly. With the free GrabCAD software, you can easily prepare your models and monitor the printing process. Solid photopolymers in the colors white, black, grey, blue and transparent in 3.6 kg cartridges are available as model materials. The machine can also print flexible and dental model materials. Six material trays are installed and the machine automatically switches from an empty to a full cartridge. This enables even longer unattended printing. With the Connex series' digital print mode, you can also produce complex multi-component and multi-material models. You have the freedom to combine different materials, colors and shore hardnesses in a single model. In the case of the Objet260 Connex 3, you can mix three different model materials. The printer works with the gel-like SUP705 support material. A WaterJet wash-out station is recommended to dissolve this optimally. We can offer you this together with the printer. Nwsdpfx Aorrh S Tog Ioc The Stratasys Objet260 Connex 3 can be installed anywhere and does not require any special installation conditions. For detailed information, please refer to the site preparation guide. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are used 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. In the case of Objet24, however, we also have some new machines in stock. We offer optimum advice before, during and after the purchase. In addition to our services such as on-site installation and training of your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes, so you take no risks with your purchase. If you are not yet sure which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing. Request an individual offer today.

Condition: refurbished (used), machine/vehicle number: 32405, Year of construction: 2012, operating hours: 2,087 h, The Stratasys Objet Eden260V is a state-of-the-art 3D printer that offers a wide range of application possibilities. With its advanced features and proven PolyJet technology, the Objet Eden260V is a reliable tool for professional 3D printing applications. The technology of the Stratasys Objet Eden260V is based on the PolyJet process, which delivers high-precision results with exceptional surface quality. It is possible to print models with a layer thickness of 30 µm or 16 µm. This gives you the choice between maximum resolution or maximum speed. In both modes, PolyJet technology allows you to print intricate models with fine details. With a build envelope of 255 x 252 x 200 mm, the Objet Eden260V allows you to create a variety of complex and detailed models in a single print session, saving time and effort. Nedpfjrrhxyjx Ag Ijwc The operation of the Stratasys Objet Eden260V is simple and user-friendly. With the free GrabCAD software, you can easily prepare your models and monitor the printing process. Solid photopolymers in the colors white, black, grey, blue and transparent in 3.6 kg cartridges are available as model materials. The machine can also print flexible and dental model materials. The printer works with the gel-like SUP705 support material. A WaterJet wash-out station is recommended for optimum dissolution. We can offer you this together with the printer. The Stratasys Objet Eden260V can be installed anywhere and does not require any special installation conditions. Thanks to its compact design, it fits easily into a working environment with limited space. No special ventilation is required as the Stratasys PolyJet systems do not emit harmful vapors, dust or other chemicals into your environment. For detailed information, please refer to the site preparation guide. S7krmxd Overall, the Stratasys Objet Eden260V 3D printer offers an impressive combination of performance, precision and versatility. Whether you want to create prototypes, print complex models or produce detailed small batches, this printer delivers outstanding results and allows you to bring your creative ideas to life. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are pre-owned 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. We offer optimal advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes. This means you take no risk with your purchase. If you are not yet sure which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing - request a personalized quote today.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 500022, The Stratasys Objet500 Connex 3 is a state-of-the-art 3D printing solution that brings your creative ideas to life. With its advanced technology, it enables the precise production of complex and detailed models and prototypes. A standout feature of this impressive machine is its digital printing mode, which gives you even greater freedom in the design and realization of your projects. The technology of the Stratasys Objet500 Connex 3 is based on the PolyJet process, which delivers high-precision results with exceptional surface quality. It is possible to print models with a layer thickness of 30 µm or 16 µm. This gives you the choice between maximum resolution or maximum speed. In both modes, PolyJet technology allows you to print intricate models with fine details With an increased build envelope of 490 x 390 x 200 mm, the Objet500 Connex 3 allows you to create an even greater number of complex and detailed models in a single print session, saving time and effort. The operation of the Stratasys Objet500 Connex 3 is simple and user-friendly. With the free GrabCAD software, you can easily prepare your models and monitor the printing process. Solid photopolymers in the colors white, black, grey, blue and transparent in 3.6 kg cartridges are available as model materials. The machine can also print flexible and dental model materials. Six material trays are installed and the machine automatically switches from an empty to a full cartridge. This enables even longer unattended printing. Nwodpfxorridhe Ag Isc With the Connex series' digital print mode, you can also produce complex multi-component and multi-material models. You have the freedom to combine different materials, colors and shore hardnesses in a single model. In the case of the Objet500 Connex 3, you can mix three different model materials. The printer works with the gel-like SUP705 support material. A WaterJet wash-out station is recommended to dissolve this optimally. We can offer you this together with the printer. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are used 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. In the case of Objet24, however, we also have some new machines in stock. Maintenance contracts and other services We offer optimum advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes. This means you take no risk with your purchase. If you do not yet know exactly which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing. Request an individual quote today.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 8500144, Year of construction: 2016, operating hours: 4,739 h, The Stratasys J750 is an absolute masterpiece in the field of 3D printing. With its revolutionary technology and an impressive variety of colors and materials, it allows you to create stunning, realistic and highly precise models. You can choose from over 500,000 color variations and achieve incredible levels of detail. This means that you can represent even the finest textures, smooth surfaces and complex geometries in your models. The technology of the Stratasys J750 is based on the PolyJet process, which delivers highly precise results with exceptional surface quality. It is possible to print models with a layer thickness of 27 µm or 14 µm. This gives you the choice between maximum resolution or maximum speed. In all modes, PolyJet technology enables you to print delicate models with fine details. With the increased build space of 490 x 390 x 200 mm, the J750 enables you to create an even larger number of complex and detailed models in a single print session, saving time and effort. The Stratasys printer is simple and user-friendly to operate. With the free GrabCAD software, you can easily prepare your models and monitor the printing process. Solid photopolymers in white, black, gray, blue, cyan, magenta, yellow and transparent are available as model materials in 3.6 kg cartridges. The machine can also print flexible and dental model materials. Twelve material shafts are installed, and the device automatically switches from an empty to a full cartridge. This enables even longer unattended printing. With the digital printing mode, you can also produce complex multi-component and multi-material models. You have the freedom to combine different materials, colors and shore hardnesses in a single model. In the case of the J750, you can mix six different model materials, which enables you to create models in full-color printing. Njdporridtefx Ag Iewc The printer works with the gel-like support material SUP705. To solve this optimally, a WaterJet wash-out station is recommended. We can offer this to you together with the printer. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are used 3D printers that are overhauled and serviced by our experts and then verified by a 24-hour test print. In the case of the Objet24, however, we also have some new machines in stock. Maintenance contracts and other services We offer optimal advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the delivery of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost security, fast response times and minimized machine downtime. This means you take no risk with your purchase. If you are not yet sure which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing. Request a personalized quote today.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 8500469, Year of construction: 2019, operating hours: 2,118 h, The J850's technology is based on the PolyJet process, which delivers highly precise results with exceptional surface quality. The printer offers several layer thickness options: 14 µm, 27 µm and 55 µm. This flexibility allows you to prioritize either precision or speed, depending on your needs. With an expanded 490 x 390 x 200 mm footprint, the J850 can handle an even greater number of complex, detailed models in a single print, increasing efficiency and saving time. GrabCAD Print software simplifies operation and allows you to prepare models and monitor the printing process. The J850 supports a wide range of model materials, including the Vero family of opaque colors, vibrant VeroVivid shades, flexible Agilus30 materials and transparent options such as VeroClear and VeroUltraClear. Digital modeling capabilities allow you to combine up to seven different materials in a single model, achieving unmatched realism with full color, transparency, flexibility, and various Shore A hardness values. In addition, over 500,000 different colors can be created to produce color-critical models without painting or post-processing. The J850 is equipped with twelve material trays and features automatic material switching, ensuring longer, unattended print runs with minimal downtime. Njdovmqm Aopfx Ag Iowc The J850 uses SUP705 and SUP706B as support materials, making it easy to create intricate and delicate models. Multiple print modes - High Quality, High Mix, High Speed, and Super High Speed - allow you to customize the printing process to meet the needs of your project, whether you need maximum detail or fast concept models. For enhanced post-processing, we recommend a WaterJet washout station, which can be offered with the printer. The Stratasys J850 can be installed anywhere and does not require any special setup conditions. Its compact design allows it to fit easily into work environments with limited space. Special ventilation is not required as Stratasys PolyJet systems do not emit harmful fumes, dust or other chemicals into your environment. For detailed information, see the attached Site Preparation Guide.

Condition: refurbished (used), machine/vehicle number: 322077, Year of construction: 2015, operating hours: 380 h, The Stratasys Objet Eden260V is a state-of-the-art 3D printer that offers a wide range of application possibilities. With its advanced features and proven PolyJet technology, the Objet Eden260V is a reliable tool for professional 3D printing applications. The technology of the Stratasys Objet Eden260V is based on the PolyJet process, which delivers highly accurate results with exceptional surface quality. It is possible to print models with a layer thickness of 30 µm or 16 µm. This gives you the choice between maximum resolution or maximum speed. In both modes, PolyJet technology allows you to print intricate models with fine details. With a 255 x 252 x 200 mm building tray, the Objet Eden260V allows you to create a variety of complex and detailed models in a single print session, saving time and effort. Nwsdpfxem Tv Udo Ag Iec Operation of the Stratasys Objet Eden260V is simple and user-friendly. With the free GrabCAD software, you can easily prepare your models and monitor the printing process. Solid photopolymers in the colors white, black, gray, blue and transparent are available as model materials in 3.6kg cartridges. In addition, the machine can print flexible and dental model materials. The printer works with the gel-like support material SUP705. To dissolve this optimally, a WaterJet washout station is recommended. We can offer this together with the printer. The Stratasys Objet Eden260V can be installed anywhere and does not require any special set-up conditions. Its compact design makes it easy to in a work environment with limited space. No special ventilation is required because Stratasys PolyJet systems do not emit harmful fumes, dust or other chemicals into your environment. For detailed information, you can view the deposited site preparation guide. Overall, the Stratasys Objet Eden260V 3D printer offers an impressive combination of performance, precision, and versatility. Whether you’re prototyping, printing complex models, or producing detailed short runs, this printer delivers outstanding results and allows you to bring your creative ideas to life. This printer is part of the Certified Pre-Owned (CPO) program. Certified Pre-Owned 3D printers are used 3D printers that have been fully refurbished, serviced, and then verified through a 24-hour test print by our experts. This means that you take no risks with your purchase.

Condition: refurbished (used), machine/vehicle number: P17307, Year of construction: 2015, operating hours: 9,018 h, Experience the ultimate in user-friendliness with the Stratasys Dimension SST 1200es 3D Printer. Whether you’re a novice or an experienced user, this printer offers a seamless and efficient 3D printing experience. Constructing parts has never been easier! Our ABS material ensures the creation of robust and virtually indestructible parts. With the Stratasys Dimension SST 1200es, you can produce high-quality, functional parts with ease. The build chamber of the Dimension SST 1200es measures 254 x 254 x 305 mm, providing ample space to accommodate a wide range of 3D printing needs. Customize your prints with selectable layer thicknesses of 0.254mm and 0.330mm, allowing for precise control and exceptional detail. For optimal operation, the Stratasys Dimension SST 1200es requires a wash station. It utilizes soluble support material SR30, enabling the creation of complex models, including undercuts and holes, while reducing the need for post-processing. Seamlessly integrate your workflow with the popular and free GrabCAD software. This user-friendly software allows even inexperienced users to quickly and effortlessly bring their 3D printing projects to life. Unlock endless possibilities with a variety of iSQUARED materials compatible with the Stratasys Dimension SST 1200es. Choose from ABS, ABS-ESD, ABS-CF, and ASA to meet the specific requirements of your applications. Each spool for building and support materials contains a generous 922 cm³, ensuring uninterrupted printing. The Stratasys Dimension SST 1200es can be installed anywhere, as it requires no special ventilation or complex setup conditions. The Dimension system is designed to be environmentally friendly, emitting no harmful fumes, chemicals, or waste. For detailed installation and connectivity requirements, refer to the provided site preparation guide. Nwjdpfem Tv Evex Ag Isc Discover the power of the Stratasys Dimension SST 1200es and revolutionize your 3D printing capabilities. This printer is part of the Certified Pre-Owned (CPO) program. Certified Pre-Owned 3D printers are used 3D printers that have been fully refurbished, serviced, and then verified through a 24-hour test print by our experts. Maintenance contracts and other services We offer optimal advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost security, fast response times and minimized machine downtimes. This means that you take no risks with your purchase.

Condition: new, functionality: fully functional, Year of construction: 2025, total length: 3,000 mm, total height: 2,000 mm, Industrial 3D Printer – Sinuprint 3000 A state-of-the-art solution for large-format additive manufacturing, tailored for molds, design elements, composite parts, and structural components. Sinuprint 3000 combines robotic flexibility with CNC precision, making it the perfect choice for industries requiring robust and scalable 3D printing. Applications range from mold making and shipbuilding to interior design and custom large-scale structures. Key Specifications: Printing system: CEAD E25 or S25 extruder (configurable to customer needs) Robotic arm: COMAU N-170, 3 m reach, 160 kg payload Control system: Siemens SINUMERIK ONE – full CNC control for unmatched accuracy Nwedpfx Ajwgkqtsg Ioc Software compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: Brand new machine Optional add-ons: Heated print table for improved adhesion and print quality Note: Standard configuration includes the CEAD E25 extruder. Software is not included but can be supplied as an optional accessory.

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Nwodpfx Asu N Auueg Ijc Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts *