Used 5 Axis Milling Machine for sale (97,661)

Condition: excellent (used), Year of construction: 2006, Heller MCH 280 C 5 axes Year of manufacture: 2006 Control: Siemens 840 D Spindle speed: 8000 rpm Cedpfx Asy Nybgolwjrc Travel paths X: 1000 mm Y: 1200 mm Z: 1100 mm Pallet size: 630 x 630 mm Rotary table: 360,000° x 0.001° Tool magazine positions: 400 Interface: HSK 100

Condition: used, Year of construction: 2016, Mazak Variaxis i-500 5 Axis CNC Machining Centre. S/No. 276584 (2016) with Mazatrol Smooth X CNC Control, 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Mazak Spindle Chiller Unit, Absolent A Mist 10 Oil Mist Filter Extractor, Cromer Swarf Management and Filtration System, Renishaw RMI-Q Tooleye, Machine Weight 8000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Cedpfxoy Shk Uo Alwjrc Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Crsdpfx Aoyi Dnielwsc Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 5-axis universal machining center Quaser PRO.FLEX 6, manufactured in 2016, Heidenhain TNC 640 control system, HSK-A63 taper, 60-tool magazine, 15,000 rpm spindle, Blum TC60 probe. The machine is powered on and can be demonstrated. Machine Description For sale: 5-axis universal machining center Quaser PRO.FLEX 6. The machine is suitable for precise and complex 5-axis machining. It is equipped with a Heidenhain TNC 640 control system, a spindle with an HSK-A63 taper, a 60-tool magazine, and a 3D Blum TC60 probe. The machine is currently powered on and can be demonstrated in operation by arrangement. Technical Data Manufacturer: Quaser Model: PRO.FLEX 6 Year of manufacture: 2016 Control system: Heidenhain TNC 640 Spindle taper: HSK-A63 Max. spindle speed: 15,000 rpm Number of positions in the magazine: 60 Probe: Blum TC60 Number of axes: 5 Connection: 400 V / 50 Hz Power consumption: 71 kVA Machine weight: approx. 15,000 kg Cedpsy Udrtjfx Alwjrc Machine dimensions: approx. 511 x 456 x 316 cm Serial number: 352A160001 Operating Hours System on: 24,959 h Machine on: 21,005 h Program run: 7,634 h Hydraulics: 20,995 h Axes: 5,936 h Spindle S1: 6,423 h Spindle S2: 0 h Accessories / Tool Holders Included in the offer is a 3D Blum TC60 probe and a calibration mandrel used during machine start-up with initial spindle lubrication. The tools in the collet chucks can remain with the machine for collection. ER16 collet chucks: short: 1 pc medium: 14 pcs long: 3 pcs ER32 collet chucks: short: 2 pcs medium: 2 pcs long: 2 pcs Shell mill body clamping parts: 3 pcs Separate clamping parts can be taken for the shell mills. The mills/bodies themselves will continue to be used on the machine for the tool room. Machine Condition The machine is used and in operational condition. It is powered on and can be demonstrated. Inspection by prior arrangement.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, MANUFACTURED IN 2014 EQUIPPED WITH HEIDENHAIN TNC 530 Cjdpfsy Twa Uex Alwjrc ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C, X 360º SPINDLE: 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES ON X, Y, Z 120-TOOL CHANGER ROBOT SYSTEM 3R WITH 115 PALLETS TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING UNIT

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 1350U TRIPALET, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: Z 1350 AND 1150, Z 895, A +16°/-120°, C ±360° SPINDLE: 24,000 RPM, 38 KW, HSK-A63 (NEW) TABLE: DIAMETER 1100, MAXIMUM LOAD 1600 KG 46-TOOL CHANGER Crodjy Tv Nbspfx Alwjc 3-PALLET CHANGER, 1000 x 840 MM RENISHAW OMP60 PART PROBE LASER TOOL MEASUREMENT APS - Advanced Process System APS Extended ITS - Intelligent Thermal Control CINEMATIC OPTIONS CHIP CONVEYOR WITH TSC MACHINE WEIGHT: 19,000 KG

Year of construction: 2016, condition: good (used), ZFX – 5-axis dental milling machine, Csdpfx Aljy S Symewerc Year of manufacture: 2016, Machine has 1266 spindle hours, Control system: Beckhoff, New spindle installed 3 years ago, Machine has a maintenance contract with the manufacturer, Collet diameter: 4 mm, Compact design: 220 kg monoblock metal casting for maximum stability and optimal milling performance. 5-axis simultaneous machining, A and B axes with servo motors. Dry and wet machining (extraction system and pump-filter system fully integrated!) Speed range: 6,000 rpm to 60,000 rpm (4-shank) Automatic tool changer for up to 28 tools Tool breakage detection and automatic length measurement Sister tool management Maximum tool length: 40 mm Travel range (x, y, z axis): 180 x 190 x 110 mm Rotary axis: 360° (continuous) Swivel axis: -30° to +120°

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions Codpfx Aoy H Ebtslworc (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm

Condition: good (used), Year of construction: 2015, Ref. -No.: 10647 Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2015 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Serial no.: 2903XXXX Machine-No.: 591XX X-Travel: 3600 mm Y-Travel: 1100 mm Z-Travel: 900 mm Max. Workpiece Weight: 8000 kg Max. Tool Weight: 5 kg Max. Tool Length: ab Spindelnase 300 mm Workpiece Diameter With 2 Vacant Positions: 130 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 120 Tool changer: 60 Spindle Speed: 20000 RPM Max. Torque: 288 / 187 Nm Rapid Travel X/Y/Z: 80 x 60 x 60 mm / min Main Drive: 35 / 25 kW Internal cooling: 40 bar coolant reservoir: 600 L. Further information: - Fixed table, often with an integrated NC rotary table (FD version) - Spindle: Standard speed is typically 10,000 rpm; more powerful variants are available as an option - Traveling column design: Ideal for pendulum machining and long workpieces - Stability: The mineral cast machine bed ensures high damping and precision - 5-axis: Usually equipped with an NC swivel milling head (B-axis) The machine can be viewed while powered on by appointment. Cedpfx Ajy Hrpdelwjrc Translated with (free version)

Condition: ready for operation (used), Year of construction: 2001, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 500 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 400 mm SPINDLE: 9000 rpm; 13 kW; SK40 DIN 69871 B-AXIS: -10° +95 ° C-AXIS: 360 ° TABLE SIZE: 700 x 500 mm MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: CHAIN-TYPE ; 16 POS CONTROL UNIT: HEIDENHAIN TNC 430 Crsdpfx Alewl R Dqowec WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2000 x 1520 x 2140 mm ACCESSORIES: SWARF CONVEYOR NOTE: MANUAL 5th AXIS

Condition: ready for operation (used), Year of construction: 1999, - USED - 5-AXIS VERTICAL MACHINING CENTRE    X-AXIS TRAVEL: 1000 mm Y-AXIS TRAVEL: 600 mm Z-AXIS TRAVEL: 500 mm DISTANCE SPINDLE NOSE-TABLE: 682 mm RAPID FEEDS X-Y-Z: 40 - 40 - 30 m/min SPINDLE: 32000 rpm; HSK E50 B-AXIS: ± 25 ° C-AXIS: +180° -177 ° TABLE SIZE: 1400 x 815 mm MAX ADMITTED LOAD: 2000 Kg Cjdpfswmxnyjx Alwsrc TOOL MAGAZINE: CHAIN-TYPE ; 20 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: FIDIA WEIGHT: 12000 Kg OVERALL DIMENSIONS: 2900 x 2800 x 3400 mm ACCESSORIES: FUME EXHAUSTER

Condition: like new (used), Year of construction: 2012, Parts shown by hand not come. With machine come tool holders SK 40. X 600 mm; Y 430 mm, Z 460 mm; A 150 deg x 0.001;C 360 deg x 0.001 12.000 rpm, Heidenhain iTNC 530 , Codolpcdwepfx Alwjrc 40 tool places in changer SK 40.

Condition: used, Year of construction: 2016, machine/vehicle number: 1265000063, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 41,000 kg, DMG MORI DMU 160 P Universal Machining Center in heavy-duty portal / duoBLOCK design for 5-axis positioning and simultaneous machining. Equipped with Heidenhain TNC640 control and designed for high-precision heavy-duty machining in tool, mold, and mechanical engineering.Large working area with integrated NC rotary table and controlled B-axis milling head for complex 5-axis machining. The machine concept is designed for maximum rigidity, thermal stability, and high long-term accuracy.The machine features SK50 spindle technology, a wheel magazine with 63 tool positions, and a double gripper system. Through-spindle coolant supply and extensive measurement and process optimization systems are available.Equipment includes, among others:Oil and emulsion mist separator with mechanical filterBlow air through the spindle centerBlum Laser NT Hybrid tool measurementM&H infrared measuring probe3D quickSET package for kinematic calibrationMPC Machine Protection ControlACC Active Chatter ControlApplication Tuning Cycle (ATC)Virtual axis for Heidenhain TNC640Heidenhain HR520 electronic handwheel with display4-color signal lampSafety package in case of power failureSafety laminated glass paneMachine version as pit version with adapted chip conveyor height and operator staircaseThe virtual axis enables movement towards an inclined tool via the electronic handwheel.The machine is designed for demanding 4-/5-axis machining with high process reliability, optimized surface quality, and reduced machining times.Technical highlights:63-position wheel magazine with SK50 tool holderThrough-spindle coolant supplyIntegrated measurement and calibration systemsHeavy-duty portal design with high thermal stabilityOptimized for high-precision continuous machiningExtensive factory options and process-optimized equipmentMachine from ongoing industrial production with high-quality OEM equipment and documented factory configuration.Operating hours: approx. 19,680 h (program run: 24,564 h). 5-axis machining: Yes Travel Z-axis: 1100 - mm Weight approx.: 41,000 kg Serial number: 1265000063 Travel X-axis: 1600 - mm NC rotary table: Yes Dimensions (LxWxH) approx.: 7000 x 6000 x 3500 mm Control: Heidenhain TNC 640 Travel Y-axis: 1600 - mm Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes Crjdpoy S Nhusfx Alwsc

Condition: good (used), Year of construction: 2007, Year of manufacture: 2007 Spindle hours approx. 14,000 (replaced 11/2017) Drive operating hours approx. 68,500 Traverse paths: 850x700x500 mm Rapid traverse: 45 m/min Speed: 18,000 rpm HSK 63 Tool changer with 38 stations Laser tool measurement/breakage monitoring NC tilting rotary table D=420 mm Csdey Er Ukopfx Alworc Control: Siemens 840D Internal coolant supply 80 bar Paper band filter Chip conveyor Electronic handwheel module Oil mist extraction Chip flushing gun Thermal compensation Heidenhain probing system

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpm Movement X/Y/Z : 600/630/510 mm Tool holder : HSK 63 In General: Codpfx Aloy Hntxoworc Year of manufacture:2020 Control system:Siemens 840 Dsl Travel range X/Y/Z:600/630/510 Spindle centre distance:600 mm Rapid traverse X/Y/Z:120 m/min Spindles (2 pieces): Technology:Motorised spindles Speed:17,500 rpm Power:35 Nm Torque:80 Nm Tool holder:HSK 63 Swivel mount: Technology:A-axis or U-axis with counter bearing Drive:Direct drive (torque motors) Clamping bridge: Technology:Clamping bridges, each with 2 NC rotary tables Drive:Direct drive (torque motors) Table diameter:Ø 340 mm Max. table load:2 x 90 kg Max. fixture dimensions:2x Ø 600 x 400 mm Tool magazin: Technology:Chain magazine Tool changer:Pick-up Number of stations:2 x 72 Max. tool diameter:80 mm Max. tool length:425 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Drive systems:Direct on all axes (linear motors) Hydraulic clamping:2x 3-circuit Chip removal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Separate cooling unit Support control:Pneumatic Tool breakage detection:Inductive Automation preparation:Profinet interface, automatic doors, automatic rinsing cycle

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 12071602, We are offering this very well-maintained ARIX V450 CNC 5-axis machining center, year of manufacture 2012. Model: V450 Voltage: 400 V Phases: 3 Input power: 12 kVA Cjdpoyybx Isfx Alwjrc Spindle power: 7.5 kW Spindle speed: 8000 rpm Serial number: 12071602 Date of manufacture: 2012-07 Weight: 3500 kg Required installation area: 2.7 m (front width), 2.3 m depth, 2.5 m height !!!!! Please refer to the detailed description in the attached PDF. !!!!! If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Acu-rite Mill Power 3 Axis CNC Control Table Size 1370 x 254mm Travels: X – 1050mm Y – 390mm Z (Quill) – 115mm Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Credpfsx Af I Aox Alwjc Spindle Speeds High 55 – 4300rpm Weight: 1850Kgs 3 Phase Electrics Manufactured: 2018 Complete with: Vice Interlocking Table Guards Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: VT0341, functionality: fully functional, High-performance machining center SPINNER VC850-5A Travel distances X850, Y510, Z510 mm High-performance milling spindle up to 18,000 rpm Power Pmax 20 kW / Nmax 66 Nm as a built-in hybrid spindle with direct drive, without belt Tool holder on the spindle HSK63 TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in the X/Y/Z axes In the latest generation of SIEMENS "SINUMERIK ONE" control system - SPINNER - SPIOS 24" touch operating panel for I4.0 applications - Operating panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point shifts - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL WHEEL on the operating panel, integrating the following functions into a single control element: - Handwheel function in jog mode Cedpfx Alsy S Ttzswerc - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the sequence -> all important functions of the setup mode integrated into one control element Electrical preparation for HOWIMAT 2-axis rotary tilting table on VC850/VC1150 2-axis ROTARY TILTING TABLE mounted on the right in the working area particularly rigid and space-saving, suitable for holding chucks or collets TILTING AXIS: - Dividing accuracy +- 0.005 degrees - Swivel range 105 degrees - Maximum tangential moment 1,200 Nm ROTARY AXIS with direct drive via coaxial motor: - Dividing accuracy +- 0.005 degrees - Bore 80mm, spindle nose D=160 mm - Maximum tangential moment 500 Nm UNIVERSAL CHIP CONVEYOR VC850 PREPARATION of the spindle FOR HIGH PRESSURE for using the additional tank up to 70/80 bar HIGH-PRESSURE TANK 70bar with paper band filter for flushing centrally through the spindle Additional compressed air supply at the spindle head Compressed air centrally through the milling spindle Flushing gun in the working area PREPARATION FOR SPINNER STANDARD PROBING SYSTEM Wireless SPINDLE PROBE ADDITIONAL HOOD on top for a closed working area STANDARD DOCUMENTATION in German consisting of machine manual and CNC manuals is delivered in digital form on the control system. Paper manuals available at an additional cost. RING EYES for crane unloading, set consisting of 4 pieces absolutely necessary for crane transport STANDARD PAINTING two-color in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-conductor) Notes: The price includes warranty services only within Germany. In the case of new and demonstration machines, the images are not necessarily of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are included in the scope of supply only to the extent listed in the technical description. Please request a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Crsdpfx Aex Hn A Tjlwec Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: new, Year of construction: 2025, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Csdpfxjxc Tr Ae Alwerc Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: good (used), Year of construction: 2008, Ref. -No.: 10628 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2008 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Rotary Table (Lxw): 2500 x 2000 mm No. Of Working Stations: 60 Machine length: 7300 mm Codpfx Aloy Ed R Rjworc Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Further information: - with -H / V- head Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2005, Ref. -No.: 10627 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2005 Type of control: CNC Control: Heidenhain 530 Storage location: Halbrstadt Country of origin: Germany X-Travel: 3200 mm Crjdpfx Aloy Ed R Dewec Y-Travel: 2000 mm Z-Travel: 1600 mm B-Axis: 360 ° C-Axis: 360 ° Spindle Taper: SK 50 Rotary Table (Lxw): 2500 x 2000 mm Table Load: 20.000 kg Tool Piece Magazine With: 100 Pcs./pcs. Operating hours: 75.377 H Spindle hours: 28.246 H Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Further information: - with H / V head Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table Cedpfsy Ed Icex Alwsrc - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Crjdpfxey Ed Ehe Alwsc Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Cedpfxey Edzpe Alwerc Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.