Used 6 Spindle Automatic Lathe for sale (47,375)

Condition: not inspected (used), Year of construction: 1991, Schütte multi-spindle automatic lathe SF 32-6 DNT Project No.: Year: 1991 6-spindle bar automatic lathe DNT version (with servo drive for cycle time and speed) max. bar passage 32.0 mm for bars up to 3.30 m incl. bar guide and stand - 1 set of cams for cross slides - 1 set of cams for longitudinal slides - part pick-off device - additional feed on stations 2 and 4 - thread cutting gearbox - thread rolling unit with Fette T 27 thread rolling head - rotating drilling unit for off-center drilling - quick drilling, reaming, and thread cutting spindle Rsdpsrrgqzjfx Adyech - drive for polygon turning and thread milling unit - Balluff cam switchgear - Woerle plain text display - Siemens PLC with plain text display - 2 swivelling control panels - chip flushing box

Year of construction: 1996, condition: used, Schütte SF 26S DNT YOM 1996 Rcjdpfx Asi Hb Szjdyjh Number of spindles: 6 Max bar diameter [mm]: 26 Auto bar loader: Cucchi BLT Multi-6 - (YOM 2015) Cross slide pos. 1, 3, 4, 6 CN slide pos 2, 5 Spindle stop attachment for main spindles Bar feeding pos. 6 Pickup spindle pos. 6 High pressure coolant system Chip conveyor, hinged belt type Oil mist filter ISI RON/A 2500A, ID 26295

Condition: good (used), Year of construction: 1988, 6-spindle-automatic lathe brand: TORNOS type: SAS16 new in: 1988 Rsdpfsvwmb Dex Adysch equipped with: sub spindel threading attachement flushing system chip conveyor automatic baroader IEMCA PRA 40/31/P

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Rcsdpfxoin Ub Ts Adyjh Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: good (used), Year of construction: 1982, 6-spindle-automatic lathe brand: TORNOS type: AS14 new in: 1982 equipped with: sub spindel threading attachement Redpjvwmcujfx Adyjch flushing system chip conveyor automatic baroader IEMCA PRA 40/31/P

Condition: ready for operation (used), Year of construction: 1997, A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg. Rcjdpfx Astqfq Rodyjh

Condition: good (used), Year of construction: 1984, 6 spindles Tapping with electronic limit stop Hexagonal punching Rodpov R U D Tefx Adyoch Calibration Pick-up device Many accessories With IEMCA PRA 40/42 F bar loader Includes STEIMEL chip removal, box conveyor, and 24/7 production

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Rcsdpsxmd Sbefx Adyjh Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: good (used), Year of construction: 1987, functionality: unexamined, machine/vehicle number: 61699, turning diameter over cross slide: 160 mm, spindle bore: 28 mm, turning diameter: 260 mm, center height: 140 mm, turning length: 500 mm, total length: 1,600 mm, total width: 1,000 mm, total height: 1,900 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 71 rpm, overall weight: 800 kg, - Operating voltage: 380 V - Frequency: 50 Hz - Connected load: 3 kW - Nominal current: 25 A Equipment: - Tailstock - Multifix Type A tool holder - Steady rest - Four-jaw chuck (diameter: 120 mm) Rsdov Iq Uijpfx Adysch

Condition: used, Year of construction: 2007, turning diameter 18 (16) mm control Siemens spindle circle diameter 180 mm bar feed max. 80 mm longitudinal slide -travel 50 (63) mm cross slide - travel 20 (32) mm Rcodpevanqrsfx Adyoh Spindlespeed 800 - 8.000 min/-1 power capacity - main spindel 11 kW Torque 18 Nm dimensions of the machine ca. 6,0 x 1,5 x 2,2 m weight of the machine ca. 5,5 t CNC-Bar-Automatic-Turning Machine SCHÜTTE - SG 18 - Co2 fire extinguishing system Kraft&Bauer - Ruez scraper belt conveyor - IEMCA bar feeder PRA 52 42 F - Tool package - Curve package - various clamping devices

Condition: used, Year of construction: 2015, Technical details: Rcjdpfsxc Idmox Adysh number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. *

Condition: used, AUTOMATIC SINGLE SPINDLE LATHE TB-42 for max diameter 42 mm Rsdexcpi Rjpfx Adyjch

Condition: excellent (used), Year of construction: 1992, L & Z Lathe (used) Manufacturer: Boley Model: 6 LZ AUT Year of manufacture: 1992 Center height: 140 mm Distance between centers: 500 mm Swing over bed: 270 mm Swing over cross slide: 160 mm Spindle bore: 32 mm Speed range: 28 – 3550 rpm Tailstock taper: MK 3 Quill travel: 80 mm Main spindle motor power: 1.4 / 2.2 kW Machine weight: approx. 1,050 kg Space requirements: approx. L 1,600 mm x W 1,000 mm x H 1,450 mm Quick-change tool post system Multifix size E incl. insert Chip tray Chip guard/rear splash guard Rodpfx Aow N Rp Tsdyjch Chuck guard Machine lamp Including collets - see images 3-axis Heidenhain digital readout Coolant unit The machine is in excellent condition and ready for immediate use. Forklift available, free loading onto truck Affordable shipping possible Machine location: 59510 Lippetal

Condition: good (used), Year of construction: 1984, Schuette Multi-spindle automatic lathe Designation: Schuette SF 20-6 Cam-controlled Number of spindles: 6 Year of construction: 1984 Max. bar diameter: round 20 mm SW 17 mm AK 18 mm VK 14 mm max. bar feed: 80 /(160) mm Number of independent longitudinal slides: 6 Total / working travel (standard): 63/40 mm " " (special) up to: 100/63 mm Number of independent cross slides: 6 Total / working travel Middle and top slide up to: 32/20 mm Bottom slide up to: 40/25 mm Rcedpfx Adorrgr Ueyeh Spindle circle diameter: 224 mm Main times min/max: 0.36/150 sec. Secondary times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in 2nd range: 355-2000 rpm Rated power of the drive motor: 15 KW Connected load: 50 kVA Speed of the drive motor: 1500 rpm Length * Width (in standard version) 3705 * 1320 mm incl. rod guide (in standard version) 6335 mm weight without bar guide and accessories approx.: 4.6 to. of the rod guide approx.: 0.5 to. total without accessories approx. 5.1 to. (all data according to manufacturer) Additional equipment: - Pick-up device with reverse machining - Threaded cutting gear - Separate control panel on operating and rear side - IEMCA bar loader

Condition: used, Year of construction: 1990, turning diameter 60 mm Rcodpfot Hw Atox Adysh turning length 200 mm number of slides total power requirement 20 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1971, Technical details: number of spindles: 6 spindle passage: 25 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SE25 Yob: 1971 six-spindle automatic lathe 6 main spindles for bars up to D=25mm Incl. package of different clamping tools, gears and cams Please, contact us for getting more information and pictures on mail(at) or * Rcodpfjwnrupex Adyeh

Condition: good (used), Year of construction: 1989, Schuette multi-spindle automatic lathe Schuette SF 20-6 Cam-controlled Number of spindles: 6 with mechanical gearbox Max. bar diameter: round 20 mm SW 17 mm AK 18 mm VK 14 mm max. bar feed: 80 /(160) mm Number of independent longitudinal slides: 6 Total / working travel (standard): 63/40 mm " " (special) up to: 100/63 mm Number of independent cross slides: 6 Total / working travel Middle and top slide up to: 32/20 mm Bottom slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max: 0.36/150 sec. Secondary times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd range: 355-2000 rpm Rated power of the drive motor: 15 KW Connected load: 50 kVA Speed of the drive motor: 1500 rpm Rodpferrgqdex Adyjch Length * Width (in standard version) 3705 * 1320 mm incl. rod guide (in standard version) 6335 mm weight without bar guide and accessories approx.: 4.6 to. of the rod guide approx.: 0.5 to. total without accessories approx. 5.1 to. (all data according to manufacturer) Equipment: Pick-up device with backward processing Thread cutting gear with electric clutch thread cutting spindle additional longitudinal slides on position: 1,2+4,5 cutter chute hydraulic parts catcher in Pos 6 Kraft and Bauer C02 snow blower (out of operation) electric: Siemens S 5 control cam switch unit: Balluf Separate control panel on the operating side and rear side Woerle plain text display electrically prepared for bar loader ( n) other: prepared for decentralized oil mist separator Machine is under power in our sales room !

Condition: used, Year of construction: 1993, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine Rjdpsrgt E Refx Adyjch The scope of delivery regarding the tooling equipment could be different like pictures. *

Condition: good (used), Year of construction: 1991, Schuette multi-spindle automatic lathe 6-spindle lathe with mechanical gearbox - Thread cutting gear - pick-up device - Back machining - Bar feeder - bar guide Rcjdpfxerrgpye Adysh etc. can be viewed under power !!!

Condition: used, Year of construction: 1991, Technical details: number of spindles: 6 spindle passage: 16 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Tornos Rcsdpfx Ajw Dqlxsdysh Type: SAS16-DC Yob: 1991 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=16mm incl. barloader IEMCA PRA 40/38F  Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1999, Technical details: Rcodpfxjw Dqmpe Adyeh number of spindles: 6 spindle passage: 16 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: SAS16.6 Yob: 1999 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=16mm incl. barloader IEMCA PRA 40/33F  Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1995, Technical details: number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SFH130 Yob: 1995 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC Rcsdpfx Adsw Hbz Ajyeh Dnt drive loading and disloading in position 6 additional cooling pump with magnetic spark plug filter Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1977, Technical details: number of spindles: 6 spindle passage: 42 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF42 Rcjdpfx Adewnrqdeyeh Yob: 1977 six-spindle automatic lathe 6 main spindles for bars up to D=42mm Incl. package of different clamping tools, gears and cams Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2019, Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Rcodpfx Adsldk R Hoyoh Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on or *

Condition: used, Year of construction: 2016, Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Rcodpeldk R Refx Adyjh Please, contact us for getting more informations and pictures on or *