Automatic cnc lathe buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbuqvkgt0r 78" (2000 mm) Max. between centers, 9.8" round or 7" square (250 mm round or 178 mm square) max. part dia. with revolving steady rest, 6.5 HP main motor, 0 - 4,500 RPM spindle speeds; 0.5 HP hydraulic motor. -- Automatic controlled variable speed carriage with tool post and revolving steady rest, 0 - 32 FPM max. working speed, carriage return speed 33 FPM. -- Special cutting system with: (1) Roughing & (1) finish gouge for simultaneous rou... more
11

CNC automatic lathe TRAUB TNL 26 Bau 2000

More Traub Tnl 26
Brno, Czech RepublicCzech Republic dealership location
7116 km
2000
good (used)
Tzm0lqn Operating hours: 58288 h Rod diameters: 26 mm Number of axes: 12 Turning length: 250 mm Engine Power: 10.7 kW Speed: 8000 rpm. Machine dimensions: 3706 x 1292 x 1630mm Equipment: Control system: TRAUB TX8I Loading magazine FMB Chip conveyor Emulsion Pick-up robot 13 axes C axis on main and counter spindle more
6

CNC automatic lathe DMG GILDEMEISTER SPEED 20-11 linear

Strutstr 17, 73061 Ebersbach/Fils, DEGermany
6687 km
2011
excellent (used)
Main spindle Rod diameter max. 20 (25) mm Speed max. 10,000 min-1. Power 5,5 / 3,7 kW Counter-spindle maximum turning diameter 20 (25) mm Maximum speed 10,000 rpm. Power 5,5 / 3,7 kW Axis Max rapid motion of the axes 40 m / min. Maximum axis acceleration 10 m/s² Out X 1 (linear) / Y1 / Z1 40 / 240 / 240 mm Away X 2 / Y2 / Z2 310 / 120 / 300 mm Away X 3 (linear) / Y3 / Z3 75 / 240 / 150 mm Tool-holder carriage 1 tool holder system linear fixed tools / driven tools 6 / 4 number Connec... more
2

CNC automatic lathe Nomura NN-20UB

Mönchweiler, GermanyGermany
6643 km
1999
good (used)
Control of Mitsubishi, FMB loader magazine, Gxjhuoc0o more
5
It is a star SV-32 J automatic lathe with CNC control FANUC 18i-TA with IEMCA-bar loading magazine Model T-TS560 (4 floors each 45 rods diameter 10mm, length 3700mm total 180 bars) The machine ran operation 1 year in 1 layer. Gxcublimi For more ask them I am gladly at any time available more
6

Automatic CNC Lathe Intorex CNi 1500

Liverpool, United KingdomUnited Kingdom dealership location
5686 km
2004
used
CNC lathe with control of 3 axes plus headstock. Max turning length 1500mm Max turning dia D300 = [ 210 X 210mm] Variable spindle speed 0 - 5000rpm through inverter Saddle advance speed 0 - 16m/min Saddle return speed 0 - 40m/min Equipped with : 2 x Pneumatic centering devices for loading of pieces Fyaxaaufi 1 x Hydraulic pre-rounding gouge, 2 x independant CNC contolled gouges , 1 for roughing, 1 for finishing 2 x Hydraulic dowel knives Round steady rest Front sliding guards with electrica... more
5
Sofort aus Medizintechnik frei : CNC Stangendrehautomat Tornos Bechler Type ENC 164 Baqkvwqre9 Baujahr 1990 CNC Steuerung Fanuc O - TT Stangendurchlass 16 mm Drehlaenge 135 mm Stangen 2 - 20 mm Sechskant 2 - 17 mm Stangenlaenge 3,3 m 4 fach Rohr Hydraulischer Stangenlader Sameca Quicksam 20 Spindeldrehzahlen bis 8.000 U / min Querbohrapperat more
5
Control system:Mitsubishi Turning diameter: 22/28 mm Spindle speed:8000 rpm 7luyili8a Engine power: 5.5 kW Type:revol.Head:Duplomatic 3x head/original and two new Live tools Bar feeder:material IEMCA BOSS 332E Machine dimensions:1270 x 889 x 1270 mm Weight: 3500 kg Accessories: Bar Feeder more
6
Turning diameter 33 mm Turning length 320 mm Control Fanuc 310 i Spindle hole diameter 33 mm Number of controlled axes 10 Y-axis 350 mm Spindle speed 8000 rpm Rapid traverse speed 40 m / min Number of shots in the turret head 2x 8 Driven stations 2x 8 Speed of the driven tools 6000 rpm Drive power at the driven tool 1.1 / 0.55 kW Dimensions L x W x H 4.75 x 1.68 x 1.96 m Ncu8r Machine weight 6.0 ton with FMB Barfeeder more


automatic ...
daily

New machines via email!

Stay updated!
3

CNC automatic lathe Nomura NN-20UB

Mönchweiler, GermanyGermany
6643 km
1999
good (used)
Control of Mitsubishi, Feeder FMB C0sc2nsm more
5

CNC automatic lathe TRAUB TNS 65/80

More Traub Tns 65
St.Leon-Rot, GermanyGermany dealership location
6602 km
1990
used
Fabr./Fabr Traub Typ/Modell TNS 65/80 Maschinenr./Mach.Nr. 369 Baujahr/Year of make 1990 Betriebsstunden/working hours 21558 Stangenlader/Bar feed LNS Hydrobar Steuerung/Control TX8-d Spazangenfutter/collet chuck Clal2vvg Angetriebene Werkzeuge/driven tools Teilegreifer/parts gripper more
4

CNC AUTOMATIC LATHE Tornos Deco 10

Bienne, SwitzerlandSwitzerland dealership location
6613 km
1999
used
CNC AUTOMATIC LATHE "TORNOS" DECO 2000, CAP. 10 MM 10 axes, with feeder Tornos Robobar SSF-226 no.C14111 12'423 working hours Manufacturing origin Switzerland Voltage 400V/50Hz/3ph ; 8 KVA ; 12A Netweight abt. 1500 kg Dimensions 1650x1050x1850 mm Custom position 8458.11 20 TECHNICAL DATA (standard execution) Headstock (axis Z1) (+C axis optional) Bar capacity of max bar dia. 10 mm Max workpiece length according to guide bush type 60/90 mm Rotation speed of the programmable spindle 0-16000 ... more
4

Automatic Cnc lathe ITS NORIS 60

ZANICA, ItalyItaly dealership location
6851 km
2010
used
Cnc Mitsubishi M700 Sr0b3g Turning ø 60 mm I° SPINDLE Bar capacity 60 mm Rpm 3000 giri/min Motor power 15 Kw I° TURRET Tools holder 8 Motorized tools 8 II° TURRET Tool holders 4 more
6
- year of manufacture: 2011 D8pbkky - controller: Mitsubishi 60/60S - thread guide type: FEDEK SN 5-42 S2 (5-42mm diameter) - biggest diameter on X axis: 42 mm (with chuck: 350mm) - biggest lenght on Z axis: 380 - biggest lenght on Y axis: 200 - C axis on the main spindle - on the main spindle are 4 axial and 4 radial driven tool - maximum power: 12 kW - operating manual - weight of the machine: 3000kg - weight of the bar feeder: 1000kg more
2

CNC automatic lathe Maier ML26B

Mönchweiler, GermanyGermany
6643 km
2000
good (used)
CNC Fanuc, FMB, feeder good condition Bcam2qwzci more
6
NC AUTOMATIC LATHE "TORNOS" DECO 2000, CAP. 13 MM Lader Robobar SSF-226 Inventory no.2150013, machine equipped as follows : Machine with 10 axes Lt9tv Without S3/S5/S6 With revolving guide-bush No ejector Various tool-holders and accessories more
6

CNC AUTOMATIC LATHE TORNOS 8SP

Bienne, SwitzerlandSwitzerland dealership location
6613 km
2006
used
CNC AUTOMATIC LATHE "TORNOS" DECO 8SP spindle max 15'000min-1, 5 axes, Fanuc 32i, Be07ugk90 feeder Mini Boss325A no.1200641N02 more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 3y8emakf LOBO-COYER 'CP-168A' Hydraulic Copy Lathe. 26 1/2" length cap. with 4" min. length of stock and 1/2" - 4" max. diameter cap., hopper feed with automatic chucking, square or round stock can be hopper fed. -- Equipped with: 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change, 3 HP hydraulic motor. -- Complete with: Swivel control panel & safety wire mesh accross the front of machine; unit is capable of producing ... more
4

CNC Turning Lathe SMEC SL2500BM

Santiago de Querétaro, Querétaro, MexikoMexico
2994 km
2015
as good as new (ex-display)
Fair machine SMEC SL2500BM CNC lathe with powered tools by WTO Dgkvfip Swing diameter / swing diameter: 650 mm Maximum turning diameter and turning length: 405 x 520 mm Bar passage: 77 mm Chuck size: 254 mm (10 ") Spindle speed: 3,500 rpm Spindle nose: A2-8 Spindle motor: 18.5/15 kW Torque spindle: 534 NM Rapid traverse x/Z: 24/30 m / min Traverse paths x/Z: 245/540 mm Tool places: 12 PCs BMT65 Quill stroke: 100 mm Machine weight: 5,200 kg Footprint without chip conveyor: ... more

CNC Lathe Cami TAC 29

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2001
ready for operation (used)
Accesories: Tubj2zal more
4

CNC Lathe PINACHO S94-C/260

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1998
used
turning diameter 80 mm turning length 1600 mm control Fagor 8050TC weight of the machine ca. 2,2 t Tbsfom7 more
6

CNC Lathe MONFORTS DNC 5

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2005
used
turning diameter 520 mm turning length 1200 mm control Siemens type 840 D spindle passage 85 mm spindle diameter 130 mm swing diameter 560 mm Tool changer 12 Tool changer 12 live tooling turning speeds 32-4000 U/min total power requirement kW weight of the machine ca. 13 t dimensions of the machine ca. 4,5x5,5x2,1 m Bbapfyz3gc Machine is equipped with a counter spindle. lots of accessories more
15
Manufacturer: FAT-HACO type: TUR 800 x 3000 MN control: SIEMENS SINUMERIK 810 Year of construction: 2005 Bcdj3yzeso TECHNICAL data: maximum swing over bed: 800 mm Max swing over cross slide: 480 mm Centre distance (turning length) maximum: 3,000 mm Spindle bore: 117 mm in the train pipe spindle speed: 5-1,200 RPM Width of bed management: 544 mm Width of the transverse support plate: 330 mm Tool system: 8 x 50 tailstock turret with VDI: -Maximum workpiece weight Max: 3 t -Tailst... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Yrrjoc MATTISON 57-F Manual Production Rotary Lathe with extended bed. --General data: 42" Cut Length Capacity with working dimensions 4" x4"max. x 3/4" x 3/4" min. -- 96" extended length of stock handled between centers. 17" max. diameter stock swing over carriage. --Drives: Spindle drive motor: 15 HP with spindle dia. 2-5/8" and arbor speed of 2,700 RPM cutter spindle motor. 1 HP & .5 HP work-piece rotation motor, (variable via pulleys). -- In... more
6

CNC Turning lathe SMEC PL25LM

Santiago de Querétaro, Querétaro, MexikoMexico
2994 km
2015
as good as new (ex-display)
Fair machine SMEC PL25LM CNC lathe with powered tools by WTO Swing diameter / swing diameter: 650 mm Maximum turning diameter and turning length: 356 x 1,020 mm Bar passage: 77 mm Chuck size: 250 mm Spindle speed: 3,500 rpm Spindle nose: A2-8 Spindle motor: 22/18.5 kW Torque spindle: 625 NM Rapid traverse x/Z: 18/24 M / min Traverse paths x/Z: 225/1,040 mm Tool places: 12 PCs BMT65 Quill stroke: 100 mm Machine weight: 6.600 kg Footprint without chip conveyor: 3.904 x 1.675 ... more

CNC Lathe Index MS32-6 B

More Index Ms 32
Amsterdam, NetherlandsNetherlands dealership location
6220 km
1998
ready for operation (used)
Rated voltage: 400 V Bcipmuxkfy more
6

CNC Lathe HITACHI SEIKI HT 40 S

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1987
used
turning diameter 700 mm turning length 1500 mm control Seicos weight of the machine ca. 9 t Ebexgsr more
5

CNC Lathe PONTIGGIA PH 800 E

Stockstadt, GermanyGermany dealership location
6564 km
used
turning diameter:1620 mm Lo0cz turning length:7000 mm control:Siemens 820 T total power requirement: kW weight of the machine ca.:26 t dimensions of the machine ca.: m 4-jaw faceplate diameter:1.500 mm closed steady:508 - 1.240 mm closed steady:85 - 540 mm More information can be found in the Appendix. more
3

CNC Vertical Turning Lathe Hitachi Seiki CS-20

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1998
good (used)
Maximum turning diameter 350 mm. Maximum swing 350 mm. Maximum spindle bore for bar work 59 mm. Spindle speed 30-5000 Rpm. Maximum turning length 150 mm. Number of tools on turret 12. Ekdo2isdi Tool type VDI 40. CNC control Seiki Seikos Ʃ10L more
1

AUTOMATIC BACK KNIFE LATHE GOODSPEED CP-168 A

North Carolina, United StatesUnited States dealership location
518 km
1996
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cs0xki8o GOODSPEED - COYER CP-168 A Back Knife Lathe -- Manufactured machine authorized by GOODSPEED.° 26.7" Length cap., and 1/2" - 3.9" max. dia. [...] with: -- 10 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change. -- 3 HP hydraulic feed motor, 2-speed carriage. -- Swiveling control panel, PLC sequence controller built into separate control cabinet. -- (3) pressure gauges, automatic way & support collar lubrication. Featu... more
4

Lathe - cycle-controlled MAS MT 50 CNC

Bühl, GermanyGermany dealership location
6593 km
1998
used
turning diameter 500 mm turning length 1450 mm control HEIDENHAIN MANUAL PLUS greates pass round over bed 500 mm swing diameter over slide rest 350 mm centre height 255 mm centre distance 1500 mm spindle bore 82 mm spindle turning speed range 2 - 2400 U/min spindle nose DIN 55027 Hbkysnqd max. torque on the spindle max. 1055 Nm face slide travel 260 mm 140 mm rapid travel - longitudinal/face 5 m/min tailstock quill diameter 80 mm tailstock quill stroke 180 mm tailstock taper MT 5 total powe... more

CNC Lathe Pittler PM 51-6

Amsterdam, NetherlandsNetherlands dealership location
6220 km
1993
ready for operation (used)
Bcipddrwey more
4

CNC Lathe - Inclined Bed Type OKUMA LB12

More Okuma Lb 12
Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1993
used
turning diameter 200 mm turning length 350 mm control OSP500 weight of the machine ca. 3.5 t Ccsdwp9 more
1

CNC LATHE MORI SEIKI SL-25B

More Mori Seiki Sl
C/ La Premsa 15/Pol. In, 08150 Parets del Valles (Barcelona), ESSpain
6528 km
1987
good (used)
CNC LATHE MORI SEIKI Model SL-25B Distance between centers 1125 mm. Ø over bed 520 mm. Ø max over cross slide 350 mm. Spindle Ø 60 mm Tailstock travel 990 mm. rapid movements X, Z = 12, 15 m / min. Spindle speed: 42-4200 rpm Total power 31 KVA Machine dimensions 3600 x 1540 x 1900 mm Machine weight 5500 kgs Year 1987 Equipped with: CNC Fanuc Ghong0nf0 KITAWA chuck Ø 210 Turret 12 stations Tool pre-setter more
5

CNC 2 Axis Lathe Victor V Turn 26/110

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
2000
good (used)
Maximum turning diameter 380 mm. Maximum swing 520 mm. Maximum spindle bore for bar work 75 mm. Spindle speed 3500 Rpm. Bgbhl7fe Maximum turning length 1130 mm. Number of tools on turret 10. Tool type VDI 40. CNC control Fanuc 0-Tc more
1

AUTOMATIC HOPPER FED VARIETY LATHE LOCATELLI BIGARIETE

North Carolina, United StatesUnited States dealership location
518 km
1986
used
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Ihipdcd Hydraulic, automatic lathe for small wooden parts production; 4.75" (120 mm) max. dia. and 6-11/16" (170 mm) max. length with no boring, 4-3/4" with boring. -- Mandrel motor 5 HP, speeds at: 2,000, 2,540, 2,750, 4,010 & 5,140 RPM; hopper feed with 39-3/8" (1000 mm) max. blank piece length and automatic ejection of wooden parts. -- Equipped with: Chucking unit, Automatic tool holder carriages with (1) Copy head, (1) roughing tool, (1) finishin... more
5

CNC Lathe - Inclined Bed Type HEID SDSM-NCC

Bühl, GermanyGermany dealership location
6593 km
1980
used
greates pass round over bed 750 mm swing diameter over bed slide 520 mm turning length 2660 mm movement of facing slide 460 mm spindle head DIN 55022 Gr. 11 spindle bore 105 mm max. torque on the spindle max. 5000 Nm max. workpiece weight between centres 1200 kg Gt8uos turning speed range - stepless 11,2 - 1800 U/min spindle motor 52 kW tailstock quill diameter 125 mm tailstock quill stroke 150 mm control BOSCH CNC System 5 tailstock taper MT 6 floor space required (w/o switchgear cabinet) 7,... more

CNC Lathe Schutte AF 26-8 DNT

Amsterdam, NetherlandsNetherlands dealership location
6220 km
1987
ready for operation (used)
 Auto multispindle lathe                                                                                     Bcipdwubm0 more
4

CNC - lathe Emco EmcoTurn 342

Walluf, GermanyGermany
6533 km
1995
excellent (used)
2 x EmcoTurn 342 Control: Siemens built: 1995 Gz9mlkldq TECHNICAL data: maximum turning diameter over bed: [mm] 340 Max Drehdurchmessesr on sled: [mm] 158 Spindle bore: [mm] 53 Speed range: [RPM] 0-6000 Power: [kW] tailstock travel: X-axis: 300 [mm] Z-axis: [mm] 300 Rapid traverse: (x/Z) [m/min] 12 AUSTTATUNGSMERKMALE: 2 x Emcoturn 342 in the package including automation (concatenation) more
8
CNC 6-axis Turning Center MAZAK MULTIPLEX 620 Mfg. year 1990 Jfcggpx Mazatrol M32 control Max. turning diameter 210 mm Distance between centers 1.180 mm Max. turning diameter 580 mm Max. bar working capacity 51 mm Main and sub spindle AC 15 kW, max. speed 4.600 rpm 2 x 12-station turret 2 x 12 driven tool stations Max. speed driven tools 3.500 rpm 2 x C-axis Coolant pumps Swarf conveyor Dimensions 3.620 mm x 1.795 mm x 1.910 mm Weight 8100 kg CE-mark more
1

4 Axis CNC Lathe with driven tools Okuma LU 15 MW

More Okuma Lu 15
Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1996
good (used)
Itfydxd Standard turning diameter 150 mm. Maximum swing 530 mm. Maximum spindle bore for bar work 52 mm. Spindle speed 45 – 4.500 Rpm. Number of tools on turret 12. Tool type VDI 40. CNC control OSP 7000 L. With 4 Axis, driven tools and sub spindle more
1
Elect./Voltage: Ikh02kn HAPFO AP-5000/HYDRO Hydraulic Copy Lathe. -- Specifications: 62-3/4" Max. chucking cap., 59" copy length and 9-3/4" max. turning dia.; (1) 2.3/1.75 HP two-speed spindle motor, 0.5 HP DC motor feed drive for carriage. Feed electronic infinitely variable 0 - 11.5 FPM; (1) innovative hydraulic tracing device with 6" stroke and only 2-3/8 ounce pressure, center height 9-27/32". -- Includes: (1) HSS Copy lathe tool, original sample tracing device, dust collection hood, r... more
3

CNC Lathe MONFORTS MNC 602 E

Mönchengladbach, GermanyGermany dealership location
6371 km
1988
used
turning diameter:*320 mm turning length:600 mm control:SIEMENS powered chuck diameter:200 mm Tool bore:VDI 30 turning diameter over bed slide:160 7amicqzal turning speed range:112 - 5000 U/min spindle bore:42 mm turret (x-stations):12 total power requirement:30 kW weight of the machine ca.:8,1 t dimensions of the machine ca.:6 x 4 x 2,5 m with CNC SIEMENS 810 T control C-axis, driven tools hydrostatic round guiding in z-axis tailstock chip conveyor, coolant device with extensive accessori... more

CNC Lathe Tornos Bechler 632-6

Amsterdam, NetherlandsNetherlands dealership location
6220 km
1995
ready for operation (used)
Bcipfzmizb more
5
Turning diameter 300 mm Turning length 510 mm Control Mazatrol T32-2 Circular diameter 440 mm Standard turning diameter 300 mm main spindle: RPM - spindle 45 - min 4500 / -1 Drive power - main spindle 15 / 11 kW Spindle bearing diameter 100 mm Spindle bore 62 mm Rod diameter 50 mm Turret: Number of tool stations 8 pos. Procedures: x axis 180 mm Z-axis 510 mm Tailstock: Tailstock displacement 480 mm Quill stroke 130 mm Quill diameter 80 mm Feeds: Rapid traverse x axis 30 m / m... more
7
Heidenhain 4290 control inclusive TurnPlus G0ffedlg3 3-jaw chuck c-axis driven tools 12 fold turret head tailstock chip conveyor Technische Daten / technical details: max. Umlauf- über Bettbahnabdeckung / max. swing  over bed 570 mm max. Umlauf- über Planführungsabdeckung / max. swing- over sledge 420 mm Planweg (x) / cross way (x) 220 Mm Längsweg (z) / longitudinal way (z) 635 mm Spindelbohrung / spindle hole 79 mm Drehzahlbereich / spindle speed 25-5000 UpM /rpm Werkzeugr... more
4

CNC 2 Axis Lathe Mazak Quick Turn 20

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1995
good (used)
Maximum turning diameter 300 mm. Naqmf Maximum swing 440 mm. Maximum spindle bore for bar work 51 mm. Spindle speed 50-5000 Rpm. Maximum turning length 446 mm. Number of tools on turret 8. Tool type Drum turret. CNC control Mazatrol T Plus more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Glmzmofv3 NC automatic copy lathe for symetric and asymetric parts. 76" max. length cap with automatic hopper feed of 65" (1700 mm) stock capacity. -- Single spindle copy (from template or sample) shaping and sanding lathe with SIEMENS "Sinumnerik 810" NC control, color graphics display; can program spindle speeds, feedrate, parameters etc for each profile. 76" Max. length with double end drive, 4 HP motor, shaper head with 5.5 HP motor. -- Variable ... more
3
Control: OSP P200 L Bccyjqk2pm Drehdruchmesser: 340 mm Top width: 1,000 mm -4 controlled axis -driven tools -Reistock -Conveyors more


automatic ...
daily

New machines via email!

Stay updated!

to

to

Edit search
AUTOMATIC CNC LATHE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close