Used Adhesive Application for sale (8,596)

Condition: excellent (used), Here, we offer you a DÜRR testing station for adhesive applicators. DÜRR testing station for adhesive applicators, including (5 robot-guided adhesive applicators). DÜRR testing station (custom-built by Dürr) for the automotive industry. Weight: 1200 kg Type: DÜRR testing station for adhesive applicators Condition: used Scope of delivery: (See image) Credszd Ukvjpfx Aaref (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal with a second glass pane, which is applied in a later process step. The panes are fed in, processed, and removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly sophisticated machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Codpfxozdyh Ho Aarjrf Maximum width of the applied sealant bead: 12.0 mm Required constant input pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Environmental Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material container D18 according to DIN 6644 – with base (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and Weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and exhibit a defined viscosity profile. Use only materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic for the intended use. Detailed product descriptions and information on the handling, storage and disposal of the material used can be found in the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions, gantry robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions, drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions, control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material Butyl. Condition: used From a test laboratory, in like-new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2022, OVERVIEW Credezdya Njpfx Aarsf his TecnoBodega Ingeniería / TB Ingeniería C1EL self-adhesive labelling and capsule machine, manufactured in 2022, is designed for the application of front labels, back labels, tax stamps and capsules on bottles. The machine is suitable for compact bottling lines in wine, spirits, liqueur and beverage production. The machine is equipped with 3 labelling heads and can process bottle formats with a height range from 140 to 370 mm and a diameter range from 50 to 100 mm. It works with paper self-adhesive labels and supports label sizes from 40 to 105 mm in length and 18 to 150 mm in height. The system includes a bottle transport conveyor, infeed timing screw, independent self-adhesive labelling heads, capsule distributor and capsule application unit. It also features automatic speed regulation according to bottle flow and integrated machine safety systems. The machine is built in stainless steel with transparent safety guarding and is operated via a Weintek HMI terminal. The observed configuration includes label reel support discs, internal label dispensing heads, bottle guiding elements, timing screw and conveyor system. TECHNICAL DATA - Manufacturer: TB Ingeniería / TecnoBodega Ingeniería - Model: C1EL - Machine Type: Self-adhesive labelling and capsule machine - Year of Manufacture: 2022 - Number of Labelling Heads: 3 - Labelling Formats: Front label, back label and tax stamp - Label Type: Paper self-adhesive labels - Production Capacity: approx. 1,000 – 1,500 bottles/hour - Capacity for Shrink Capsules: up to approx. 2,000 bottles/hour on Bordeaux bottles Ø76 mm - Bottle Height Range: 140 – 370 mm - Bottle Diameter Range: 50 – 100 mm - Core / Mandrel Diameter: min. 76 mm - Maximum Reel Diameter: 250 mm - Label Length Range: 40 – 105 mm - Label Height Range: 18 – 150 mm - Control Interface: Weintek HMI terminal - Included Components: Bottle conveyor, infeed timing screw, self-adhesive labelling heads with independent feed, capsule distributor, capsule application unit - Included Features: Automatic speed regulation according to bottle flow, machine protection and safety systems, compact line integration - Construction: Stainless steel frame with transparent safety doors - Safety: Emergency stop, safety guarding and warning labels - Condition: Used, installed in production environment

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. — Condition • Used • Fully functional • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos Crsdpfeyc H U Sex Aarsf — Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Fe-Ma-Tech Bag Melter Glue Application Unit: - Type: advanced PUR 2 kg light eSmart - Year of manufacture: 2022 - TOP condition - Weight: approx. 70 kg Crjdpfx Aaew I S Eajrsf - Dimensions: 550 x 430 x 970 mm - Type of glue pump: Gear pump - Pump nominal speed: 93 rpm - Base tank size (reservoir): approx. 1 liter - Melting capacity: up to 2 kg/h - Temperature sensor: PT100 device and external heating / optional Ni. 120 - Control accuracy: +/- 1°C The PUR 2 kg light eSmart bag melter is suitable for edge banding machines with lower adhesive consumption. Tank size is compatible with all standard PUR bag packages in sizes of 2-3 kg. Modular system: All components can be replaced individually. Simply remove the sheet metal cover to quickly access all relevant parts. Melting capacity up to 2 kg/h (depending on the adhesive and its viscosity). The solid PUR adhesive, wrapped in aluminum foil, is placed into the tank. The adhesive is gently melted as needed. A glue reservoir is located beneath the tank, holding up to 0.7 kg of liquid adhesive. From there, the adhesive is conveyed via a gear pump, through a FE-MA-TECH® hot-melt hose and heated application head (valve) into the application units (IMA, Homag, etc.). The system is completely airtight, allowing the adhesive to remain in the unit for several months when used properly. Shipping via freight forwarding is available for an additional €190.40 #8404

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: - Roller width: 1350 mm - Max. pass-through height: 70 mm Cjdjzc Nmwopfx Aarsrf - Glue application: single- or double-sided - 2-roller system - Diameter of glue application rollers (top/bottom): 160 mm - Main motor: 0.75 kW - Dimensions (L/W/H): 2000x750x1550 mm - Weight: approx. 534 kg ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), TETRA PAK APPLICATOR TCA45 CONVERTED TO HELICAP27 1000 PRISMA YOM 2006 FULL COMPLETE EXCELLENT CONDITION Codpfouzv E Rjx Aarjrf DISMANTLED AND PACKED INTO TETRA BOX VIDEO IN RUNNING CONDITION UNDER REQUEST

Condition: like new (used), Year of construction: 2013, functionality: fully functional, overall weight: 500 kg, MAKOR TF/P PLUS Smoothing Machine 19.06.6512 TYPE TF/P Plus Max. working width 150 mm Max. height 120 mm Adjustable feed speed, max. 140 m/min Top pressure rollers with drive, x 6 Pressure force adjustment via pneumatics Bottom rollers with drive, x 6 CE marking Year of manufacture 2013 Product description: - Paint without waste. - Robust and efficient transport system with 6 motorized pressure units. - Various application heads guarantee results, even for filling and defect repair products. Designed for continuous application of bolo, gesso, and paint on strips, picture frames, and profiles with an extrusion system, using a correspondingly shaped steel counter-template. Construction made of steel sheet and tubular steel. Guaranteed forward movement via No. 6 bottom metal rollers and No. 6 top rubber pressure wheels, variable with adjustable speed via an inverter. The top pressure wheels are mounted on freewheel bearings to reduce uneven wear. Pneumatic distribution panel equipped with a selector for engaging the top pressure wheels and appropriate independent pressure regulators. OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. Profiling machine for grinding wheels and silicone wheels, Italian company MAKOR, price €1,500 - Model: SAG 100 - Year of manufacture: 2003 - Serial number: 10447 - Diameter of profiled wheel: 160 - 200 mm - Diameter of profiling disc: 180 - 200 mm - Machine dimensions: 1700 mm x 800 mm x 1800 mm - Weight: 280 kg Csdpfxsytc Rks Aarerf 2. MAKOR ST/100 FOIL SLITTER, price €1,200 3. MAKOR TEP 3000 BELT CONVEYOR, price €700

Year of construction: 2024, condition: not inspected (used), machine/vehicle number: S-D12MM, 1. Drinking Straw Applicator, Manufacturer: unknown (China) Type: SXTG-1B, Serial No.: S-D12MM, Year of manufacture: 2024, Connection power: 3.5 kW, LED screen, accessories. Note: The system has been dismantled and could not be tested for functionality. Location: 48653 Coesfeld Codpfx Aezg Uk Ujarsrf Category: Technical equipment

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Crodpfozfx A Eex Aaref Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Inspection is possible by prior appointment. Errors and prior sale excepted.

Condition: used, 454666600000, NORGREN, dosing cylinder, adhesive cylinder and synchronous motor Crodouz D Ndopfx Aaref Model: 454666600000 Condition: Used

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² Cjdpfx Aaex Ah A Ajrerf - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: used, Year of construction: 2011, operating hours: 2,150 h, KOSME Extra 9 / 720 rotary labelling machine for bottle labelling using two self-adhesive stations (Self-adhesive) + one cold glue station, e.g. for tax bands. Codpfx Aoywcghsarsrf

Condition: excellent (used), Condition: used, fully functional Manufacturer: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Item Description: For sale: professional HOT-MELT adhesive unit BÜHNEN / MELER 6050 designed for industrial glue application. High-quality device – European-made, suitable for use in: packaging furniture manufacturing wood industry production lines ⚙️ Technical data (from the nameplate): Power supply: 230V / 50-60 Hz 400V (3-phase) Power: up to 4.7 kW Max. temperature: 200°C Max. pressure: up to 160 bar Crodpfsy Aam Nsx Aarsf Outlets: 2 Model: HB 6050-2 NI120 📦 Included: ✔️ BÜHNEN / MELER adhesive unit ✔️ 4 heated hoses (complete set!) ✔️ Cables and connectors as shown in the photos 🔍 Condition: used item shows normal signs of use in good technical condition tank interior shown in photos sold exactly as pictured

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: Csdpfx Ajy Aagijarjrf ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,300 mm, input voltage: 380 V, overall weight: 360 kg, roller diameter: 185 mm, height adjustment type: mechanical, working height: 120 mm, Roller glue spreader FIN SC2R-1300 Codpfex Af Nysx Aarsrf Working width: 1300 mm Working height: 120 mm Manual roller gap adjustment Roller diameter: 185 mm CE certificate Power: 0.37 kW Weight: 360 kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, Perfect binder with clamp, hotmelt gluing, manual cover feeder, with mobile base, binding length: max 310 mm, book thickness: max 60 mm, output: up to 320 books/h, max format: 320 × 310 mm, weight: 186 kg, 230V power supply. Crjdpfx Aaext Nywerof

Condition: used, 230 mm glue applicator, roller refurbished Specifications: • Condition – fully functional, after a comprehensive inspection • Working width – 230 mm • New rubber coating • One fixed speed • Manual height adjustment • 0.37 kW motor (1370 rpm) • Maximum working height ~ 200 mm Cjdpfx Aaozdgbberjrf • Overall dimensions: 80 x 60 x 75 cm (L x W x H) Additional information: • Very good technical condition, after a comprehensive refurbishment • The photos show the actual condition of the item for sale • The device can be switched on and tested on-site • The price listed in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or a leasing loan

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Edge banding machine KTD51 for profile strips and straight edges, with direct glue application. Minimum workpiece length: 160 mm, workpiece thickness: 10 – 40 mm, edge thickness: 0.5 – 1 mm, minimum internal radius approx. 25 mm. Year of manufacture: 1993, feed speed adjustable 4 – 9 m/min, 2.6 kW, 400 Volt. Transport available at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers. Crodpfx Ajvf H I Tjarof

Condition: excellent (used), functionality: fully functional, Selling an original Homag Group glue application unit (upper part with glue application roller and drive coupling) for edge banding machines of the Brandt / Homag brand. The unit is in good, clean condition with normal signs of wear and tear (see article photos). It features the practical quick-change system, including the corresponding locking pins (ball handles) and the original Harting connector. Technical data & details: Manufacturer: Homag Group / Brandt Part number (engraved): 4-030-15-0531 (4030150531) Components: Knurled glue roller, metering slide for layer thickness adjustment, protective grille, high-temperature-resistant connecting cable with Harting connector, 2x locking pins. Credpfx Aasy Uv Umsrof Suitable for: Many models of the Brandt Optimat series (KDN / KDF / Ambition, etc. – please check the part number with your machine beforehand).

Condition: used, input voltage: 380 V, Conveyor belt, double belt, applicator 550x1660 Crjdpfx Aoudvtwearsf Size: 550 x 1660mm Power: 0.75kW, 220/380V, 3.3/1m92A Speed: 12m/min Cardan drive.

Condition: excellent (used), Automatic labeler, label applicator Zebra 110PAX4 /ct1899 Manufacturer: Zebra Type: 110PAX4 The product comes with full documentation and software. Cedpfx Aetrly Djarjrf

Condition: used, Year of construction: 2022, The MAG 1 Peroni Ruggero is a modern, semi-automatic machine designed for manufacturers of premium packaging, magnetic boxes, and exclusive cardboard packaging. The machine combines several operations in a single work cycle, significantly increasing production efficiency and ensuring the highest precision. The machine performs milling of slots in solid cardboard, automatically applies hot-melt adhesive, and inserts magnets or metal plates into the prepared locations. This ensures that the entire process is fast, repeatable, and requires minimal operator intervention. The material is fed manually, while all key production steps are carried out automatically. An advanced positioning system guarantees accurate placement of the components, which translates into high-quality finished products and aesthetically pleasing packaging. The MAG 1 allows the application of 1 to 6 magnets or metal plates on one side of the packaging in a single work cycle, providing high production flexibility and the ability to handle diverse projects. The machine has been used sparingly and is in very good technical and visual condition, ready for immediate use in a production facility. Key benefits: - Milling, gluing, and magnet application in a single work cycle - Handles 1 to 6 magnets or metal plates simultaneously - High precision and repeatability of the process - Dedicated to the production of magnetic boxes and premium packaging - Automatic application of hot-melt adhesive - High efficiency with limited operator intervention - Very good technical and visual condition - Year of manufacture: 2022 Credpfezbtpgex Aarjf Technical data: - Manufacturer: PERONI RUGGERO - Model: MAG 1 - Year of manufacture: 2022 - Serial number: 007 Supported materials: - Solid (gray) cardboard with a thickness of 1.5 to 4 mm - Magnets with a diameter of 9.5 to 15 mm - Magnet thickness: 1 mm, 1.5 mm or 2 mm - Range of processed element: - Minimum width: 180 mm - Maximum width: 1550 mm Performance: - Up to 14 cycles/min when applying 1 magnet - Up to 8 cycles/min when applying 2 magnets Technical parameters: - Power: 5 kW - Compressed air consumption: 150 NL/min at 6 bar - Machine dimensions: - Length: 2500 mm - Width: 2500 mm The MAG 1 is an ideal solution for manufacturers of premium packaging who want to automate the magnet application process, increase production efficiency, and achieve the highest quality of finished products.

Condition: like new (used), Norpak Rover150 label applicator Crodpfx Aajiy Nm Usrof label applicator, variable speed head, max label width 110mm, with food pedal, 1Ph

Year of construction: 2022, condition: excellent (used), Weber Compact CC Labeller Applicator Codpfjtq E Rksx Aarsrf Complete with controller Year - November 2022 In excellent condition