4
x-travel 600 mm
y-travel 450 mm
z-travel 450 mm
Control HEIDENHAIN iTNC 530
number of spindle speeds 20.000 U/min/rpm
tool change unit 75
table-size 350 x 350 mm
table weight 200 Kg
Internal cooling system 20 bar
handwheel HR - 410
total power requirement kW
weight of the machine ca. 7,7 t
dimensions of the machine ca. m
Included
- Taster
- Paper filter unit
0bh88
- Linear regulator MQL suction
- chip conveyor
4
AGIECUT VERTEX 2F,
year of manufacture 2010;
travels: X= 350 mm, Y= 250 mm, Z= 256 mm
travels U/V-axis: +/- 70 mm
maximum taper: 30° at 100 mm height
Maximum workpiece dimensions: 750 x 550 x 250 mm
Maximum workpiece weight: 200/450 kg
Achievable surface quality: Ra: 0.08 µm
Available wire diameters: 0.05 - 0.33 mm
Water bath machine with automatic wire threading
With automatically lowerable tank (accessible from 2 sides)
Incl. AGIEJOGGER- hand box for comfortable set-up
Incl. AGIESETUP 3D
Inc...
10
x-travel 800 mm
y-travel 800 mm
z-travel 550 mm
control TNC 640 Heidenhain
Main spindle:
turning speed range - main spindle max. 20.000 min/-1
power capacity - main spindel 36 / 23 kW
max. Torque 190 / 120 Nm
tool taper HSK-A63
Tool-Presetter:
tools in tool magazin 60
max. tool weight (8,0) kg
max. tool diameter (90) mm
max. tool-dia with free toolbox (140) mm
max. tool length (300) mm
change time (ca. 5,0) sec
change-time chip to chip (ca. 7,0) sec
NC-Tilting round table:
surface area ...
4
X-AXIS TRAVEL: 600 mm
Y-AXIS TRAVEL: 400 mm
Ccaj9yyilz
Z-AXIS TRAVEL: 500 mm
MAX ELECTRODE WEIGHT: 50 Kg
MAX PIECE WEIGHT: 2000 Kg
MAX PIECE SIZE: 1200 x 800 x 350 mm
TANK SIZE: 1280 x 850 x 390 mm
CONTROL UNIT: VISION 5
WEIGHT: 5500 Kg
OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm
PRICE: To be defined
InStock
11
Machine completely cleaned, overhauled, tested.
Only 4,700 hours of work
X/Y/Z strokes 550/350/400 mm
Kuoorq0l
U/V strokes 550/350 mm
Software AC CUT HMI
Z axis probing option
Cooling unit optional on request.
3
Can be seen running
Clyjxxrw
Serviced regularly by Agie Engineer
Axis Travel (X,Y,Z) 350mm x 250mm x 350mm
Toolchanger 28 position.
Tooling Erowa
C axis - Yes
Worldwide Delivery Available
Installation available at additional cost
9
Equipment:
- Spindle 36,000 min/1
- HSK 50E for IKZ
- Tool changer TCD 60 HSK 50E
- RTT2 Macro Magnum VDP
- Chip conveyor for increased demands
- Belt filter system 650L
- Internal cooling lubricant supply 18-70 bar
- Temp. Stabilization of cooling lubricants
- Drainage system
- WPC-21x Macro Magnum VDP 156
- Rinsing gun
- Oil separators
- Rotating viewing window
- Interface for oil mist extraction
- Measuring probe infrared 40.00 TI
- Laser tool measurement
- Tool blow-off device
- 2nd pc...
5
GF AgieCharmilles CUT 30
Year of manufacture 2008
travels (X/Y/Z): 600 x 400 x 350 mm
travels (U/V): +/- 50 mm
max. workpiece dimensions mm: 1050 x 800 x 350
max. workpiece weight kg: 1000
measuring system: glass scale (XY) / encoder (UVZ)
possible diameter wire guides: 0,15 - 0,30 mm
maximum taper: ± 25° at 80 mm height
automatic wire threading
best surface finish: Ra 0,25 µm
B3pdutuofi
machine dimensions (LxWxH): 3100 x 2800 x 2325 mm
machine weight: 5000 kg
The machine is cleaned, completely ...
x-travel 800 mm
y-travel 800 mm
z-travel 550 mm
control iTNC 530 Heidenhain
Main spindle:
turning speed range - main spindle max. 28.000 min/-1
power capacity - main spindel 28 kW
tool taper HSK A63
pallet changer:
numbers of pallets 7
size of pallet 500 x 630 mm
P07rn
max. palett load 500 kg
swivellable B: -121 / +90 °
rotatable C: 360 °
Tool-Presetter:
number of toolpositions 115 pos.
Max. mould width 80 / (140) mm
max. tool length 350 mm
max. tool weight 10 kg
feeds:
feed speeds 61...
7
Working area 500 x 350 x 250;
Habemngx
see pictures;
if required with extensive accessories
11
YOM: 2011
Control Unit:
Heidenhain iTNC 530
Cooling through spindle
measuring probe
Main Drive
Spindle speed range 10000
Tool taper 40 ISO
ATC 40
Number of axis 3
ready for 4 axe
Movement
X-Axis - 800 mm
Z-Axis - 540 mm
Y-Axis - 500 mm
Table
500 x 900 mm
This AgieCharmilles MIKRON VCE 800 PRO Vertical Machining center was made in 2011.
B8w8wujkxu
Included in the price is a 3R palletising system. Designed for automatic changing of pallets in chucks on machine tables in milling machine....
3
GF AgieCharmilles CUT 20 P,
Year of manufacture 2008
travels: X= 350 mm, Y= 250 mm, Z= 250 mm
travels U/V-axis: +/- 45 mm
Maximum conicity: +/- 25° at 80 mm height
Bxrkpai7lb
Maximum workpiece dimensions: 900 x 680 x 250 mm
Maximum workpiece weight: 400 kg
Achievable surface quality: Ra 0,25 µm
Available wire diameters: 0.15 - 0.30 mm with closed diamond guides
Water bath machine with automatic wire threading
Manual front door accessible from 1 side
Glass scales on X- and Y-axis
Collision protec...
3
GF AgieCharmilles FORM 2000HP, year of construction 2011;
AGIEVISION 5 control,
C-construction, fixed table, lowerable container
Travels: X = 350 mm, Y = 250 mm, Z = 350 mm;
Max. workpiece dimensions (L x W x H): 820 x 580 x 250 mm
Max. workpiece weight: 800 kg
Distance table to quill: 170-520 mm
Bplklgxqs
Quill with automatic chuck of choice (Erowa / 3R Systems);
40-fold electrode changer;
Working tank can be lowered for optimum accessibility;
Incl. C-axis for rotation, indexing and erosion (U=...
4
GF AgieCharmilles CUT 2000
Year of manufacture 2011
Equipped with AWC (Automatic Wire Changer) for the use of two different wire diameters
Travels: X= 350 mm, Y= 250 mm, Z= 256 mm
Travels U/V axis: +/- 70 mm
Maximum taper: 30° at 100 mm height
Maximum workpiece dimensions: 750 x 550 x 250 mm
Maximum workpiece weight: 200/450 kg
AGIE IPG-V generator
Achievable surface quality: Ra: 0.05 µm
Ccyumijn2u
Available wire diameters: 0.07 - 0.30 mm
Water bath machine with automatic wire threading sys...
8
General Data
Machine weight 4200 kg
Movement
X-Axis Movement 600 mm
Y-Axis Movement 400 mm
Z-Axis Movement 400 mm
Workpiece
Workpiece X 1000 mm
Workpiece Y 700 mm
Workpiece Z 400 mm
Table
Outer length 800 mm
Outer width 600 mm
Media
Daxgbsvr
Main electronic connection 3x400 V
Power consumption 9-mar kVa
This AgieCharmilles Form 30 Erosion machine was manufactured in the year 2015 in Switzerland and has 112 production hours. It has a table of 800 x 600 mm. The machine is like new and is i...
3
AGIECHARMILLES +GF+ CUT200MS - 2016 Wire cutting EDM machine
E3cnkxt
5
X-travel: 650mm, y-travel: 600mm, z-travel: 500mm, controls: HEIDENHAIN iTNC 530 (2P), spindle/ operational hours counter: 33,019/ 77,905h, including pallet automation.
Yuvpp0
5
GF AgieCharmilles CUT 2000
Year of manufacture 2013
Equipped with AWC (Automatic Wire Changer) for the use of two different wire diameters
Travels: X= 350 mm, Y= 250 mm, Z= 256 mm
Qqfi9
Travels U/V axis: +/- 70 mm
Maximum taper: 30° at 100 mm height
Maximum workpiece dimensions: 750 x 550 x 250 mm
Maximum workpiece weight: 200/450 kg
AGIE IPG-V generator
Achievable surface quality: Ra: 0.05 µm
Available wire diameters: 0.07 - 0.30 mm
Water bath machine with automatic wire threading system
W...
15
Control Unit
Brand Heidenhain
Model iTNC 530
Main Drive
Spindle speed range 42000
Number of axis 3
Movement
X-Axis Movement 700 mm
Y-Axis Movement 600 mm
Z-Axis Movement 500 mm
Tools
Type of tool holder 15 / 30 (HSK-E50) piece
This GF AgieCharmilles Mikron HSM 700 Vertical Machining Center was made in Switzerland in 2013. This 3 axis machine is operated through a Heidenhain iTNC 530 control unit. It works with a spindle speed up to 42000 rpm.
Application Types
Iundr9lji
Milling
1
AGIECHARMILLES DRILL 20-2012 Fast hole drilling EDM machine
B93wikrc2q
3
X-travel: 300mm, y-travel: 200mm, z-travel: 300mm, max. drilling depth: 200mm, electrode diameter: 0.3-3mm, max. load: 300kg, length: 1340mm, width: 900mm, height: 1940mm, weight: 1.2t, operational hours counter: 6111h.
Qcnib
7
GF AgieCharmilles FORM 20
Year of manufacture 2008
APG FORM control
Dual measuring system for X/Y/Z axis
Travels: X = 350 mm, Y = 250 mm, Z = 250 mm;
Max. Workpiece dimensions (L x W x H): 800 x 500 x 265 mm
Max. Workpiece weight: 200 kg
Distance table to quill: 230-480 mm
Quill with automatic chuck of choice (Erowa / 3R Systems);
Electrode magazine ELM with 4 change places
Manual front door
Incl. C-axis for rotation, indexing & erosion (U=0-40 rpm);
AGIE APG-SPIRIT "Advanced Power Generation" (...
3
Control Unit
Brand SELCA
Model 4045 DH
Main Drive
Spindle speed range 10000
Spindle motor power 12 kW
Tool taper 40 ISO
Number of axis 3
Movement
X-Axis Movement 1400 mm
Z-Axis Movement 675 mm
Table
Outer length 1400 mm
Outer width 620 mm
This AgieCharmilles MIKRON VCE 1400 PRO Vertical Machining center was made in 2007. This 3 axis machine is equipped with a SELCA 4045 DH control unit. It has a spindle speed up to 10000 rpm and a table dimensions of 1400 x 620 mm. Includes a high pressure c...
4
GF AgieCharmilles CUT 3000
Hatqskb
Year of manufacture 2011
travels: X= 500 mm, Y= 350 mm, Z= 256 mm
Travels U/V axis: +/- 70 mm
Maximum taper: 30° at 100 mm height
Maximum workpiece dimensions: 1050 x 650 x 250 mm
Maximum workpiece weight: 400/800 kg
Best achievable surface quality: Ra: 0.05 µm
Available wire diameters: 0.10 - 0.30 mm
Water bath machine with automatic wire threading
With automatically lowerable tank (accessible from 2 sides)
Incl. AGIEJOGGER- hand box for comfortable set-up
VIS...
13
General Data
Machine weight 2500 KG
Movement
X-Axis Movement 350 mm
Y-Axis Movement 250 mm
Z-Axis Movement 350 mm
Caif8jgeni
Workpiece
Workpiece X 780 mm
Workpiece Y 530 mm
Workpiece Z 300 mm
Workpiece weight 800 KG
Table
Outer length 500 mm
Outer width 400 mm
Media
Main electronic connection 3 x 380V / 50Hz
Power consumption 5 kVA
This CHARMILLES ROBOFORM 35P EDM machine was made in Switzerland in 2001. It has been working for 37328 hours. It operates with a table dimensions of 500 x 400 m...
3
table length 560 mm
table width 400 mm
Can7lvuuu
throat mm
workpiece weight 200 kg
x-axis 300 mm
y-axis 250 mm
z-axis 250 mm
generator - rated current 64 A
c-axis 3600
total power requirement 6 KVA
weight of the machine ca. 2 t
Control: CNC -Charmilles technologies,
With preliminary filter and microfilter,
separate switchboard.
DOCUMENTATION available
3
The machine is for sale, the machine is under power and can be viewed on site . A video can also be sent to you upon request.
Year of manufacture 1994
Table length 560 mm
Table width 400 mm
workpiece weight 200 kg
x-axis 300 mm
y-axis 250 mm
z-axis 250 mm
rated current generator 64 A
c-axis 3600
total power requirement 6 KVA
Machine weight approx. 2 t
Vvvp9y
Control: CNC -Charmilles technologies DOCUMENTATION available.
Machine can also be inspected on site.
6
CHARMILLES ROBOFORM 550 - 2005 Die Sinking EDM machine
Yupga8
4
table length 500 mm
table width 350 mm
ampere 65 A
Control AGIEVISION 5 CNC
Pq3pl
total power requirement 20 kW
weight of the machine ca. 4000 kg
dimensions of the machine ca. m
A G I E (Switzerland)
CNC - Controlled Wire Cutting EDM Machine
Model AGIECUT PROGRESS V 3, Year 2007
Working range, X Y Z (=height) 500 x 350 x 426 mm
Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm
Resolution of axes 0.0001 mm
Speed for positioning the axes up to 3 m/Min.
Tolerances (If machine is...
2
table length 1.200 mm
22qzbmfo
table width 700 mm
height 400 mm
workpiece weight 1.500 kg
weight of the machine ca. 3300 kg
dimensions of the machine ca. 2600 x 2810 x 2240 mm
CHARMING ROBOFIL
Clean cut generator
4-fold pallet changing robot (erowa bridging table) 2 pieces incl. machine
Type of processing Dipped
Axes X, Y, Z, U, V
X, Y, Z paths 550 x 350 x 400 mm
Driveways U, V 550 x 350 mm
Maximum inclination / height ± 30°/400 degrees/mm
Displacement measuring system linear rulers
8
General Data
Measurements width 1800 mm
Measurements depth 1600 mm
Measurements height 2125 mm
Machine weight 2490 Kg
Hgrysxvt
Main Drive
Number of axis 5
Movement
X-Axis Movement 400 mm
Y-Axis Movement 250 mm
Z-Axis Movement 200 mm
V-Axis Movement 250 mm
U-Axis Movement 400 mm
Workpiece
Workpiece weight 500 kg
Table
Outer length 850 mm
Outer width 500 mm
This CHARMILLES ROBOFIL 290 P Erosion Machine was manufactured in 1999 in Switzerland. This 5 axis machine presents a table dimensions 85...
10
x-travel 350 mm
y-travel 220 mm
z-travel 220 mm
workpiece height max. 220 mm
Cbxucoy2ti
filling capacity 395 l
1000x550x220 mm
weight 3,2 T
Dimensions (L/W/H) 2020x2050x2000 mm
workpiece weight 750 kg
144 kg wire option
CT 304 clamping system
2 sets (32 pcs.) new filter
Programm software PEPS
8200 working hours
4
AGIE Vertex 1
Year of manufacture 2007
High precision wire eroding machine
travels (X/Y/Z): 220 x 160 x 100 mm
travels (U/V): +/- 40 mm
Taper: 3° at 80 mm height
Incl. F-module, wire diameter from 0,03 mm to 0,2 mm
Best achievable surface: Ra=0.08 µm
Max. Workpiece dimensions: 300 x 200 x 80 mm
Max. Workpiece weight: 35 kg
Machine dimensions: 1400 mm x 1900 mm x 1970 mm
Machine weight: 2700 kg
Incl. AGIEJOGGER handbox for comfortable setup of the machine
15" LCD color screen with lift keyboa...
1
CHARMILLES ROBOFIL 6050TW - 2007 Wire cutting EDM machine
Bvgms8yvfd
4
X-AXIS TRAVEL: 400 mm
Clbmj99pw
Y-AXIS TRAVEL: 250 mm
Z-AXIS TRAVEL: 251 mm
U/V-AXIS TRAVEL: ± 30 mm
MAX PIECE SIZE: 250 x 530 x 860 mm
TANK SIZE: 500 x 850 x 1000 mm
WIRE DIAMETER: 0,1-0,3 mm
WEIGHT: 3960 Kg
OVERALL DIMENSIONS: 2170 x 1740 x 2100 mm
PRICE: To be defined
InStock
7
Catalog No. : 6086
Type: AGIECUT 150 HSS CE
Producer: AGIE
Made in: 1977
Characteristic:
Control system: AGIEMATIC CF 50 SE
Table dimensions: 560x445 mm
Maximum travel length X-axis: 300 mm
Maximum travel length Y-axis: 200 mm
Maximum travel length Z-axis: 251 mm
Gy0m7w
Travel length U-axis ( -): 30 mm
Travel length V-axis ( -): 30 mm
Maximum workpieces length: 810 mm
Maximum workpieces height: 250 mm
Maximum workpieces width: 580 mm
Largest workpiece weight: 450 kg
Machine height: 2...
5
General Data
Measurements width 1940 mm
Measurements depth 2300 mm
Measurements height 2220 mm
Machine weight 3900 kg
This AGIE Agiecut Classic 3s Erosion Machine was manufactured in the year 2003 in Switzerland. It can work with a wire speed of 60 ÷ 300 mm/s. This machine presents good working conditions.
Mxrxms
Application Types
EDM
5