Used Alg 100 for sale (24,116)

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder Pgodpfx Aexaar Doi Der - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: - Flexible, pneumatic press with very short set-up times - The press consists of a sturdy press frame and an easily manoeuvrable press trolley Podpjzk N Naofx Ai Dsgr - and the horizontal and vertical press sides - All controls are within easy reach - During pressing, the MPH 100 causes the press carriage to clamp – similar to a screw clamp - with 3 vertical press sides - with 2 horizontal press sides - Cabinet length 380–2,500 mm - Cabinet depth: max. 600 mm - Cabinet height 350–1,200 mm - Pressing force 3.6 kN per press side - Working height 600 mm - Weight 1.1 tonnes - Operating pressure 6 bar Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, 6 mooring posts 1 manual mooring post 1 swivel mooring post Pedpfezrvhxex Ai Dsgr Clamp Three-blade propeller Standard equipment

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heaters were acquired as part of a machinery takeover from VW/Dieffenbacher and are no longer needed. They are assumed to have very few operating hours (previous use in a laboratory). Pjdjx An Eqjpfx Ai Djgr Price per unit = €9,000, price for the entire package = €30,000.

Condition: good (used), Year of construction: 1995, Offer 24315 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm Pgjdpfx Aist Stfhs Djr

Condition: good (used), Year of construction: 1998, Offer 24339 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm Pjdpfx Aot Uzxnoi Degr - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Condition: new, functionality: fully functional, fuel type: hybrid, Year of construction: 2026, The FABO FTT-100-S Mobile Tertiary Impact Crushing & Screening Plant is a tracked crushing solution designed for producing high-quality fine aggregates and manufactured sand. Combining a high-speed tertiary impact crusher with an integrated vibrating screen, it delivers excellent product shape, high production efficiency, and reliable performance in quarrying, mining, and recycling applications. Equipped with a PLC automation system, hybrid diesel-electric power unit, and heavy-duty tracked chassis, the FTT-100-S offers outstanding mobility, low operating costs, and quick setup on any job site, making it the ideal choice for demanding crushing projects. Technical Specifications Pgodpfx Aiozv S U Ns Djr Production Capacity: 180–250 T/H Maximum Feed Size: 120 mm Crusher Type: TK-65 Tertiary Impact Crusher Vibrating Screen: 1500 × 4200 mm Drive System: Hybrid Diesel-Electric Mobility: Tracked Chassis FABO – Quality Is Our Soul.

Condition: good (used), Year of construction: 1974, Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press Pgodpfx Aioypvtkj Djr -Manufacturer: NEHER, manual spindle press type SPPG-40/100 -Pressure: max. 40,000 kg -Stroke: 600 mm -Intermediate dimension: 715 mm -Spindle mount: Ø 40 mm -Table size: 1100 x 600 mm, groove width mm -Table bore: Ø 120 mm -Dimensions: 1800/1800/H2400 mm -Weight: 1940 kg

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 08/2027, empty load weight: 400 kg, input frequency: 50 Hz, year of last overhaul: 2026, overall weight: 400 kg, electrical fuse: 16 A, power: 3 kW (4.08 HP), Planetary mixer Bär AR 100 / MK1S Professional machine with robust technology! For best results! Power: Continuously variable With timer Bowl lift: Electric Only available from us: DGUV V3 tested and certified Connection: 400V, 16A CEE plug Pgjdpfxszixbij Ai Djr Used machine, refurbished, SAB tested

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: Pgsdpozimb Djfx Ai Der - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: new, Indramat KDV 2.2-100-220 / 300-220 power supply, serial number: 234691-02932, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Pgedjzl N S Djpfx Ai Dsr

Condition: good (used), Manufacturer: Systema Psdpfx Aji D Dkdoi Djgr Type: H100

Condition: good (used), Manufacturer: DIGÉP Tip: SD 100 Pedpem Uc R Aefx Ai Dogr

Condition: used, Year of construction: 2018, operating hours: 6,912 h, 2018 | GIPO GIPOREC R 100 FDR GIGA Impact | Used Crusher | 6912 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 249000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Podpfx Aiey Dhrpe Degr 👷‍♂️ Inspected by an independent expert 61 inspection points 52 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The crusher remains in active operation, so the hour meter will increase accordingly. It has been well-maintained, and all wear parts have been recently replaced to ensure it is in good working order. While the machine shows significant cosmetic wear and looks quite used, its mechanical condition is solid. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40734 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW Pgjdpozk Nmrjfx Ai Der - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm y travel 1000 mm Pedpey Ez Elofx Ai Degr z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm - workpiece load (max) 6000 kg - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm - number of pallets 2 - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: used, functionality: fully functional, Year of construction: 1994, Storage silo, 100 tons -50/50 (ratio) Psdpezq S Irsfx Ai Dogr -Conveyor screws

Year of construction: 2024, condition: new, The Ball mill is ideal for grinding hard, brittle, hard-tough materials such as catalysts, ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Pgodpfx Aieku A H Uo Der

Year of construction: 2024, condition: new, LITech riffle splitters are used to accurately divide laboratory samples such as sand, gravel and similar materials. Designed for large capacities, the RS 100 riffle splitter qualitatively and quantitatively divides your laboratory sample quickly and easily. You can effortlessly set the following sizes: 12 - 24 - 36 - 48 - 60 - 72 - 84 - 96 - 108 mm. Pgedpfogi A Nxox Ai Djr The scope of delivery includes a 26 litre feed funnel and 2 collecting trays.

Condition: used, this listing is for Cytiva Axichrom 100/500 chromatography column Psdpszqf E Rjfx Ai Djgr the unit is in full working condition and ready for immediate use This pilot-scale column features automated axial compression for repeatable bioprocessing and downstream purification. Transparency report and technical audit: Software and media disclosure: as a direct-from-lab asset, any original software media or accessories found with the unit are included as a courtesy. licensing notice: we do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for procurement: This unit is sold as-is. while we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. ideal for labs with in-house technical expertise or existing service agreements. Sustainability impact: By choosing direct reuse, your facility avoids the carbon footprint of new manufacturing

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. Pgedpfxjzm Hr Ro Ai Dor 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Pgedpfx Aeyx Sxcsi Dsr Container: Permissible operating pressure: 1 bar / -1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: good (used), Mortising machine NAGEL HHM 100/2.2-70, machine no. 1710. Pgsdpfxjztc Hko Ai Dsr

Condition: used, Metalworking vises, EMF 100 Pgjdozugm Ropfx Ai Djr Height-adjustable and rotatable Price per unit: €80.00

Year of construction: 2002, condition: ready for operation (used), Built in 2002 Speed max 100 c/min Podod Hgutepfx Ai Dogr