Used Amada Cshw-220 for sale (221)

Condition: used, Year of construction: 1995, Used notching machine from FIM (Amada branded) Kdodpfx Abswr Aakj Uow Type: Goal 204 Capacity: 200 x 200 x 4 mm 90 degree angle Year of manufacture: 1995

Year of construction: 2013, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3270 mm Y-AXIS TRAVEL: 1550 mm Kdjdpfovhc S Hex Ab Uew Z-AXIS TRAVEL: 100 mm WORKING AREA: 3070 x 1550 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: AJ2000 Fiber ; 2000 W CONTROL UNIT: AMADA AMNC3i WEIGHT: 11200 Kg OVERALL DIMENSIONS: 10028 x 2900 x 2000 mm NOTE: WITH LOADING/UNLOADING SYSTEM LKI 3015FLC-AJ YOM 2013; AUTOMATIC NOZZLE CHANGE

Condition: excellent (used), Year of construction: 2011, operating hours: 13,900 h, functionality: fully functional, Machine is in very good technical condition. Despite it`s age, wear is very low. It was used for individual special production, not for serial. Machine is placed and connected at K-system company in Žiar nad Hronom, Slovakia. There you can see it personally. We will be helpfull with loading on truck process organization. Kodpfoxbdausx Ab Usdw

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. Kdjdew Hww Hepfx Ab Uow The standard tools are listed in the attached inventory. I can send it to you via email.

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition Kdodpfx Abew Iq Ugs Uew

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm Kdjdpsxabutefx Ab Usw dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: good (used), Year of construction: 2005, Gebruikte 3 meter Amada CNC kantbank Type: HFP 130 3 Capaciteit: 3100 x 130 ton 8-assig (Y1, Y2, X1, X2, R1, R2, Z1 en Z2) Bouwjaar: 12-2005 Automatisch Fiessler Alas lasersysteem Euro-stijl gereedschapsklemming met laswisseladapters Kdedpfswz I Irsx Ab Ujw

Year of construction: 2004, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3420 mm Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 200 mm RAPID FEEDS X-Y-Z: 80 - 80 - 60 m/min MAX CUTTING THICKNESS: STEEL 22mm; INOX 12mm; ALUMINIUM 9 mm WORKING AREA: 3070 x 1550 x 200 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: FANUC C4000 E ; 4000 W Kdsdpfevhc Tdex Ab Usw CONTROL UNIT: FANUC 160 iLB WEIGHT: 15500 Kg NOTE: DOUBLE STORAGE TOWER LKI UL300FO TWIN year 2004; SUCTION AND FILTERING UNIT TORIT; COOLING UNIT MTA 201

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 11600 kg Control Unit Brand AMADA Main Drive Pressing force 1700kN Stroke 200mm This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Application Types Kdjdpfxjxcztbj Ab Usw Bending

Condition: excellent (used), Year of construction: 2005, pressing force: 50 t, Hydraulic press brake Fab. AMADA Typ. HFP 50-20 Year 2005 Technical data Make: AMADA Type: HFP 50-20 Year of construction: 2005 Effective length: 2090 mm Capacity: 50 t Passage upright: 1,665 mm Stroke: 200 mm Projection: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: approx. 4.8 t Equipment - Controlled axles: Y1, Y2, X, R, Z1, Z2 - FIESSLER light barrier at the front - Amada upper tool clamping - CNC control 3D AMNC graphics - Rear safety guard (hinged mesh doors) - Swivel operation - front left - Tools: o Upper tool straight, R 0.8mm, H 117mm, length 2,000 mm o Bottom tool V10/88°, length 2,000 mm All data without guarantee. Ksdpfx Abjtzcxpo Ujdw A demonstration under power is possible at any time in our exhibition hall.

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Kdjdpfx Absh H Duhs Usw Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1997 stock no. 01853 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 2000, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec table width 180 mm table height 960 mm oil volume 235 L 0 300 bar controlled axis 6 Anzahl Number of working hours 29.400 h total power requirement 16.5 KW weight of the machine ca. 11910 kg range L-W-H 4025 x 2020 x 2900 mm well-maintained condition (!!) with only approx. 29.400 operating hours - in checked condition - machine video - ?v=APP0HZjMms4 Kjdpsxabgpsfx Ab Usdw Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Condition: excellent (used), Year of construction: 2001, Technical Specifications: Working length: 4230 mm Frame gap: 3760 mm Press force: 170 t CNC control: AMADA Operator Number of controlled axes: 5 Motorized adjustable backgauge Throat depth: 600 mm Stroke: 350 mm Working height: 960 mm Motor power: 16.5 kW Kodpfx Aoxhf D Uob Usdw CE marking Dimensions (L x W x H): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tonnes Accessories: Side-mounted movable safety guards The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1981, cutting diameter 250 mm dimensions of saw-band 3505 x 25 x 0,95 mm table height 450 mm cutting speed 10 - 110 m/min total power requirement 3 kW Kodpfx Ajv Ehfaeb Uedw weight of the machine ca. 1,1 t dimensions of the machine ca. 2,0 x 2,2 x 1,4 m Fully automatic band saw - including chip conveyor

Condition: new, Saw band dimensions: 4570 x 34 x 1.1 mm Kodpfx Abelkdqrj Uedw Tooth pitch: 3/4

Condition: used, Offer 41414 Kedpjxhfhmjfx Ab Ujdw Guide unit for punching tool suitable for AMADA type EMK 3612

Condition: excellent (used), Year of construction: 2006, operating hours: 25,030 h, Model QUATTRO 2kw Year 2006 remanufactured by Amada specialist 2021 Traverse Method X Axis Head Traverse Y Axis Head Traverse Axis Traverse Distance 1270 x 1270 x 300mm (Z Axis) Max. Sheet Size (including 1 reposition) 2540 x 1270mm Max. Guaranteed Material Thickness 9mm Mild Steel 9mm Stainless (Oxygen Cut) 4mm Stainless (Clean Cut) 4mm Aluminium (A5052) Max. Material Weight 210Kg Max. Feed Speed 80m/min(X & Y Axis) 60m/min (Z Axis) Positioning Repeatability /- 0.005mm Axis Drive (X, Y & Z) AC Servo Motor Workchute 1270 x 550mm Assist Gas 4 Ports, 6 Selections Auto-Change Electric Power Required (Includes Oscillator) 43KVA 400V /- 10% 50Hz Air Required Machine Only 6.0 Kgf/cm² 250 l/min Machine Length 3123mm Machine Height 2275mm Machine Weight 4.9 tonnes Standard Equipment Anti Scratch Roller System -Z-Axis Sensor NC Autofocus Oscillator Specification Model Fanuc C - 2000C RF Discharge Excited Fast Axial Flow 2000W CO2:He2:N2=5:40:55 /-2% each vol 1.75 /-0.25 Kgf/cm² (at regulator) 10 l/hour NC Specification Kdsdpfjuk U I Ujx Ab Usw Model: Fanuc FS - 160i-L 9" Colour LCD RS232C INTERFACE Air Cooled, Floor Mounted COMPLETE WITH CHILLER EXTRACTOR TRANSFORMER

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels Kdedpfx Absxaa N No Ujw - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397088

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, ram adjustment: 90 mm, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, pressing force: 60 t, type of input current: three-phase, power: 5.5 kW (7.48 HP), compressed air connection: 5 bar, warranty duration: 5 months, input voltage: 200 V, year of last overhaul: 2021, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t two-handed operation central fattening stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm total response time: 175ms voltage: 200v 50Hz 5.5kw Ksdpfxou Haqhj Ab Ujdw machine weight: 6350 kg

Year of construction: 2004, operating hours: 26,508 h, condition: ready for operation (used), General Data Machine weight 18000 kg Tools Number of index 45 Kdjdpfx Asw U E Rcjb Uew Additional Equipment Sold with all tools (list of tools attached) This AMADA EM2510NT was manufactured in 2004. A robust turret punch press, it comes with a 20-ton punching power and can handle sheet sizes up to 5000 x 1270mm. It supports a maximum sheet thickness of 3.2mm and a punching diameter of 114.3mm. Includes 45 tools for diverse punching needs. Ideal for those looking to enhance their punching capabilities. Contact us for more information about this machine. Application Types Punching

Condition: used, Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms Kdjdpfx Aexaaghob Uow

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Type: ITS 80-25 Year of manufacture: 1994 Pressing force: 80t Bending length: 2500mm Kdsdpjvncifefx Ab Usw Throughput: 400mm Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Weight: 4950kg

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions Kodpexabnyjfx Ab Ujdw

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 150 t, compressed air connection: 6 bar, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AMADA Type: TP-150C-X2 Pressure: 150t Year of manufacture: 1986 Stroke length: 175mm Distance above table: (adjustable) 230-330mm Table size: 1250x750mm Bear size: 700x550mm Electrical power: 3x200V(!!), 11kW - ​​Japanese standard Net weight: 16326kg Automatic greasing system. Ksdpfju Dw U Sex Ab Uodw Optionally with disc winder and straightener.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, pressing force: 80 t, stroke length: 100 mm, input voltage: 200 V, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 80t stroke length: 100mm number of strokes: 60-100/min table-bear distance: 310mm Kdedpou E U Nijfx Ab Usw stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm sudden stop time: 195 ms maximum downtime 215ms machine weight: 8160 kg