6
Control Unit
Brand Fanuc
Model AF4000i-B
Caif7mstrf
Main Drive
Laser power 4
Laser type CO 2
This AMADA LC 2415 Alpha IV NT Laser Cutting Machine was manufactured in Japan in the year 2008. It has been on for 46964 hours of which 11536 are cutting hours. This machine works with a 4 kW CO2 of laser power.
Application Types
Laser Cutting
5
table length 2550(5040) mm
table width 1550 mm
burner heads 1
axis stroke (X,Y,Z) 2520(5040)x1550x300 mm
laser capacity in Watt 4000 watt
control Fanuc 160il
Number of working hours 53700 h
Steel sheet steel 12 mm
Thickness V2A 9 mm
Thickness Alu 6 mm
Cutting speed X/Y/Z 80/80/60 m/min
max. table load 330 kg
Laser gas consumption L/h
Dimensions of machine:
length 5700 mm
width 2550 mm
height 2100 mm
weight 7,5 t
Power connection 64 kVA
B2nrfl72t7
The machine is delivered with:
Suction
c...
10
Type of laser: FANUC laser C2000
Laser power: 2000W
Cosilk0ko
Max sheet dimensions 5040 x 1500mm
max sheet weight 330 kg
Max stroke of carriage (x) 2520 mm
Max stroke of laser head (Y-Axis) 1550 mm
Max stroke of laser head (Z-Axis) 300 mm
Max cutting speed X and Y axis 20 m/min.
positioning accuracy 0.01mm/500mm
Height of the table 820 mm
sensor head
autofocus
gas pressure regulation 20bar
Extraction System
cooling unit
2 cutting heads are available with additional parts
Always maintained by Am...
1
Laser machine Amada LC 2415 A IV 4kW (Single)
year of construction 01/2009
Machine hours: 45.501 h
Spec:
Max. travel range X / Y / Z: 2520 x 1550 x 300 mm
With repositioning X / Y / Z: 5040 x 1550 x 300 mm
Max. Sheet thickness: 12 mm Max.
Table load: 330kg
Cutting speed: 0 - 20 m/min
Positioning speed X / Y / Z axis: 80 / 80 / 60 m/min Positioning accuracy: +/-0.01 mm on 500 mm
Repeatable positioning accuracy: +/-0.005 mm
Parts disposal flap Y x X: 1550 x 550 mm
Electrical connection: 400 V, 50...
7
Mainly aluminum was processed, regularly maintained.
The machine was purchased in 2017, of which it has only been in operation for approx. 3 months per year, no shift operation.
1 x Turboblower 2021, original FANUC
4 x carrier electrodes renewed, original FANUC
1 x temperature controller for air conditioning of the laser, original FANUC
2 x Dischargetube, original FANUC
2 x (of 4) Power Supply Unit (for Laser), original FANUC
1 x PCB CPU Pentium New, original FANUC
1 x new Lasercap 3-box Laserp...
10
Main Drive
Laser power 4,0 kW CO2
Additional Equipment
Gysdtc
Sheet size: 2500x1250 mm
Automation: PR3 + L3
This AMADA LC2415 a IV NT Laser Cutting Machine was manufactured in Japan in 2012. It has been working for 77480 hours of which 12261 are cutting hours. This machine works with a 4 kW CO2 of laser power and PR3 + L3 automation. It counts with a sheet size of 2500 x 1250 mm.
Application Types
Laser Cutting
Amada LC-3015 X1 NT 
- Displacement type (X-/Y-axis): Flying optics
- Longitudinal displacement (X): 3100 mm
- Traverse (Y): 1550 mm
- Vertical movement (Z): 120 mm
- Cutting speed: 0-30 m/min
- Traverse speeds: (X and Y axis) 85 m/min, (Z-axis) 25 m/min
- Position tolerance: (X-/Y-axis): 0,005 mm/500 mm,  (Z-axis): 0,1 mm/100 mm
- Maximum workpiece dimensions: (L x W x H) 3150 x 1525 x 19 mm
- Maximum weight allowance: 690 kg
- Maximum  thickness steel: 20 mm
- Maximum thickness st...
4
Laser machine
Amada LC 3015 F1
Cdb7jrhpt7
Year: 06/2011
6000 Watt
Working hour: approx. 23000h / 12000h / 9000h
Technical Data:
Working area X/Y/Z: 3270x1550x100 mm
Max. sheet weight: 920 kg
Max. positioning speed X/Y/Z: 120/120/120 m/min
Simultaneous: 169 m/min
Technology of axis X/Y/Z: linear drives
Max. acceleration: 30 m/s2
Positioning tolerance: +/- 0,01 mm
Positioning spread: +/- 0,005 mm
Machine weight: 15,1 to
Laser:
Laser source: Fanuc AF 6000 iB
Max. laser continuous power: 6.000 W...
15
Flatbed with shuttle table. 3KW
Cuts:
Steel: 15mm / Stainless steel: 10mm / Aluminum: 6mm.
Annual maintenance has been carried out. Proofs are available.
Turbine is newly replaced by Fanuc. Proofs are available.
(approx. 1200 hours run)
X - Axle is new replaced 2018-2019. All documentation is in place.
Uiz9gelb
Machine is in use, cuts well. Laser can be inspected at any time.
Being sold due to lack of space and restructuring.
Machine is being sold direct WITHOUT a dealer.
7
Machine is in good condition and can be inspected under power.
Manufactured in December 2005, start using in 2006.
Cutting hours: 13890h
Availability: from 09/2022
Video and more information available on request.
Technical specifications:
max. movement range X / Y / Z: 1270 x 1270 x 300 mm
With repositioning X / Y / Z: 2540 x 1270 x 300 mm
max. sheet thickness: 9 mm
max. table load: 220kg
Cutting speed: 0 - 20 m/min
Positioning speed X / Y / Z axis: 80 / 80 / 60 m/min
Positioning Accuracy: +/-0...
11
Used AMADA CO2 laser cutting machine. Fully operational. Reacently serviced by AMADA technicians. Machine preparation for loading available for extra price.
Ccvu0tx
3
Amada LC-3015 X1 NT
- Deflection type (X/Y axis): Flying optics
- Travel (X): 3100 mm
- Travel (Y): 1550mm
- Vertical movement (Z): 120 mm
- Cutting speed: 0-30 m/min
- Travel speeds: (X and Y axis) 85 m/min, (Z axis) 25 m/min
- Position Tolerance: (X/Y axis): 0.005mm/500mm, (Z axis): 0.1mm/100mm
- Maximum workpiece dimensions: (L x W x H) 3150 x 1525 x 19 mm
- Maximum weight allowance: 690 kg
- Maximum steel thickness: 20 mm
- Maximum thickness of stainless steel: 15 mm (oxygen cut),12 mm (clea...
3
Amada LC-3015 X1 NT
Principle: flying optics
4 KW continuous laser power
Cut sizes 1,500 x 3,000 mm:
Maximum sheet thicknesses:
20 mm steel / 15 mm stainless steel
12 mm aluminum
Cbgbppentq
Numerous spare parts (including resonator) are available.
Available immediately.
3
Amada LC 1212 A III
2000 Watt
year: 2006
Machine hours: about 28.500 h
Technical Details
Max. working area X / Y / Z: 1270 x 1270 x 300 mm
With repositioning X / Y / Z: 2540 x 1270 x 300 mm
Max. sheet thickness: 9 mm
Max. sheet weight: 220kg
Cutting speed 0 – 20 m/min
Positioning speed X- / Y- / Z-axis: 80 / 80 / 60 m/min
Positioning tolerance: +/-0,01 mm auf 500 mm
Repeating positioning tolerance: +/-0,005 mm
Work chute Y x X: 1270 x 530 mm
Electrical connection: 400 V, 50 Hz, 3 phases
Bucs2...
9
-power: 2.0 kW
Bkzt0l9t
-laser type: CO2
-processing range: 1250x2500
-Z axis range: 300 mm
-maximum cutting thickness black steel: 10 mm
-maximum cutting thickness stainless steel: 4 mm
-maximum cutting thickness aluminum: 5 mm
-hours of cutting: 25 000,00 H
15
Various electronic components from dismantling of an Amada Beta 3 OLC430H2 laser
see picture material
condition: used
- Single sale possible
Express delivery is possible at extra charge.
By8hl70c
You receive a 14-day "function/commissioning guarantee" on all articles.
Should an article be defective contrary to expectations, we will provide a replacement (if available) or refund the full purchase price.
6
Working hours machine: 43120 h
Laser power: 4000 Watt
Control: AMNC 3i
Working range laser: 3070 x 1550 x 100 mm
Max. steel: 22 mm
Max. stainless steel: 18 mm
Max. aluminium: 16 mm
Max. copper: 8 mm
Max. brass: 8 mm
Length: 9930 mm
Width: 2990 mm
Height: 2000 (5400 mm tower) mm
Machine weight: 14200 kg
Standard configuration
- Sensor cutting head
- WACS cutting area cooling
- Cutting monitoring
- quick lens change system
- NC cutting gas pressure control
- NC focus position control
B8hjrdpmb9...
Lasermachine Amada FLC 3015AJ Fiber with MP Flexit 3015
Year: 09/2013
2100 Watt
approx. 42000h
in April 2022 available
Technical data machine:
Working range: 3100 x 1550 x 100 mm
Table loading weight: 920 kg
Positioning speed (X/Y/Z): 120/120/120 m/min
Drive technology (X/Y/Z): linear drives
Max. acceleration: 30 m/s2
Laser principle: Flying optic
Positioning tolerance: +/- 0,01 mm
Positioning spread: +/- 0,005 mm
Machine weight: 11.000kg
Oscillator:
Laser source: Laser diode-pumped fibre...
4
Machine description:
Year of production 1996
X working area max. 1,270 mm (2,500 mm with a catch)
Y working area max. 1270 mm
With a working height of max. 250 mm
X and Y axis travel speed 80 m / min
Cwvaqypy
Fanuc 16 L control
1500 W laser power
Fanuc Resonator
Max. sheet thickness ST 37 8 mm
aluminum 3 mm
stainless 5 mm
Pneumatic connection 0,5 MPa.
Current consumption 35 kVA
Machine condition The machine is in good condition
in 2021 the turbo-blower and power supplies were replaced.
10
Operating hours approx. 40,000 hrs.
The laser has only run one shift since purchase in 2010.
Caofy9bqi8
travel: X 2530 / Y 1550 / Z 300mm
Power: 1500 Watt
Control: Fanuc FS 16-L
Sheet metal thickness steel 9mm / stainless steel 4mm / aluminum 2mm
LxWxH 580 x 250 x 230cm
Weight: 6800Kg
Is currently still involved in production and can be visited by appointment during operation.
The Fanuc Turbo Blower should be exchanged according to the report.
An offer for approx. 15.000,- Euro is available.
Description
Type CO₂, Fanuc C 1500B
Power 1500 W, Laser wavelength: 10.6 µm
Nxpl0ds
Max. sheet length 2500 mm
Max. sheet width 1250 mm
Pipe cutting possible no
B3klrjrcw3
Max. thickness of metal sheet 6 mm
Max. stainless sheet thickness 3 mm
Type CNC Fanuc FS 16 LA
Travel X 1270 mm
Pass Y 1270 mm
Travel Z 300 mm
Max. table load 220 kg
-----
Weight 6000 kg
Technical condition - needs repair (can be sold for parts)
Status of the machine used in production, possibility to see it in operation
7
Amada LC 4020F1 NT 6kW
with or withou automatic storage tower ASLUL 400 F1 TWIN
year: 2008
working hours: ~ 60.500 (Power on) / 15.500 (Operating) / 3.900 (Cutting)
Amada LC-4020 F1 NT 6000 Watt:
Year November 2008
Laser source: Fanuc AF 6000 iB
Control: AMNC-F with 15“ touch screen
Working area X/Y/Z: 4270x2050x100 mm
Max. sheet weight: 1.570 kg
Max. positioning speed X/Y/Z: 120/120/120 m/min
Betl8matpi
Simultaneous: 169 m/min
Technology of axis X/Y/Z: linear drives
Max. acceleration: 30 m/s2
...
5
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams
Bpxsnug9og
-Spare part: hydraulic cylinder from Amada HA-400W metal saw
-Piston rod: Ø 28 mm
-Stroke: 585 mm
-Admission piston rod: M30 x 1.5
-Dimensions: 835/70/H200 mm
-Weight: 17.1 kg
10
sheet width 3050 mm
plate thickness 12,0 mm
thickness at "Niro-steel" 8,0 mm
16 St.
cutting angle 0,40 - 2°10 °
back stop - adjustable 1000 (100 mm /s) mm
table height 855 mm
engine output 20,0 kW
weight of the machine ca. 7.830 kg.
range L-W-H 3.870 x 2.230 x 2.040 mm
** good condition (!!)
Furnishing:
- AMADA NC control, swiveling control panel in front left
- electric backgauge, NC controlled
- electric / hydraulic cutting angle adjustment
- electric / hydraulic cutting gap adjustment
- ...
5
pressure:30 t
no. of strokes:600 Hub/min
sheet width:4000 mm
plate thickness:6 mm
max. stroke length:40 mm
turret speed:30 U/min
y-Axis:1270
Hrfdaprsi
workpiece weight:100 kg
total power requirement:25 kW
dimensions of the machine ca.:4700 x 4100 x 2500 mm
weight of the machine ca.:13500 kg
2
GUILOTINE SHEAR AMADA TYPE GPS 640
With sheet metal evacuator
Dmvz03j2s
Cutting length (mm) :4000
Cutting thickness Steel:6 mm
Blade gap adjustment (manual or automatic) :Manual
Programmable backgauge (mm) :1000
Cutting angle adjustment (manual or automatic):Manual
Front sheet support
Approximate footprint (L x W x H) :4765 x 2120 x 2145 mm
Approximate weight : 8 Tons
4
cutting diameter max. 250 mm
weight 800 kg
Caexycn72q
Year ca. 1988
automatischer Vorschub
10
General Data
Machine weight 6400 kg
Control Unit
Qsnbr
Brand Amada
Model Operateur
Main Drive
Pressing force 1000 kN
Bending length 3000 mm
General Data
Machine weight 6400 kg
Control Unit
Brand Amada
Model Operateur
Main Drive
Pressing force 1000 kN
Bending length 3000 mm
This Amada APX 100 30 Bending machine was manufactured in the year 1998 in France and has 20365 production hours. It is equipped with an AMADA Operateur control unit. The machine has a pressing force of 1000 kN, is in ve...
5
Chip conveyor, chip conveyor belt, coolant cleaning, chip disposal, scraper conveyor, scraper conveyor belt, chip chain conveyor
-Chip conveyor: made of Amada HA-400W metal saw
-Total length: 990 mm
Bpyywqhsgu
-Connection shaft: Ø 16 mm
-Dimensions: 990/230/H295 mm
-Weight: 27 kg
10
sheet width 3050 mm
plate thickness 12,0 mm ST
plate thickness 14,0 mm ALU
thickness at "Niro-steel" 8,0 mm
16 St.
back stop - adjustable 1000 (100 mm/s) mm
table height 855 mm
B8whv7oxkm
strokes per minute 16
cutting angle 0,40° - 2°50
engine output 20,0 kW
weight of the machine ca. 7.830 kg.
range L-W-H 3.870 x 2.230 x 2.040 mm
Furnishing:
- hydraulic guillotine shears with AMADA NC control
- electric backgauge, NC controlled
- manual adjustment of cutting gap and cutting angle
- electri...
6
Hydr. guillotine shears PROMECAM / AMADA type GH 630 Z
machine No. Year of construction approx. 1985
cutting length 3050 mm
cutting thickness 6 mm
angle stop front left 1200 mm
Angle fence front right 1600 mm
backgauge 1000 mm
working height 850 mm
hydr. sheet holding down device 16 pieces
stroke rate approx. 18 strokes/min.
hydraulic tank capacity approx. 100 litres
drive power 9 kW
mains connection 400 Volt, 50 Hz
- motorized backgauge with analogue position indicator
- manual cutting gap and ...
Working hours machine: 31814 h
Laser power: 4000 Watt
Working range laser: 4070 x 2050 x 200 mm
Max. steel: 20 mm
Max. stainless steel: 16 mm
Max. aluminium: 10 mm
D2gs3kf
Length: 12300 mm
Width: 3350 mm
Height: 2500 mm
Machine weight: 14000 kg
Electrical connected load: 83 kVA
Standard configuration
Maintenance information: - TURBO BLOWER changed at 24,000 h (new Turboblower with 6,400 h) - O-rings and tubes changed at 30,000 h (Fanuc) - All maintenance performed by AMADA Control:Type: AMNC-F...
Catalog No. : 5733
Type: FOL 3015
Producer: AMADA
Made in: 2012
Characteristic:
Control system: FANUC 31 i B
Total hours: 37879 h
Qfuy2
Cutting Hours: 8943 h
Laser power: 4 kW
Length of the working table: 3000 mm
Width of the working table: 1500 mm
Maximum thickness of the cut sheet metal: 20 mm
Maximum thickness of the cut sheet metal (Stainless Steel): 15 mm
Source: AMADA AJ 4000
Equipment:
Cooling
Filtration
Nozzles
Lenses
Feeder MP flexit
Automatic loading and unloading syste...
4
pressure 80 t
Cdc8rpnelp
chamfer lenght 2500 mm
distance between columns 2050 mm
Stroke beam 200 mm
470 mm
350 mm
Quick speed,inspeed 100 mm/sec
bendingspeed 0-10 mm/sec
opening speed 100 mm/sec
600 mm
200 mm
Z1+Z2 axes controlled by cnc 0-2000 mm
Number of working hours 59000 h
Dimensions of machine:
length 3200 mm
width 1600 mm
height 2400 mm
weight 5750 kg
Control CNC
total power requirement 9 kW
dimensions of the machine ca. 3,5x1,8x2,5 m
5
Metal band saw blade, band saw blade, metal saw band
Wawcwpur
-Metal saw band: SG 2/3P x 0.9 unused
-Length: 4115 mm
-Weight: 1.2 kg
10
pressure 100 t
chamfer lenght 3110 mm
distance between columns 2700 mm
column arm 400 mm
dayligth 470 mm
stroke 200 mm
ajustment speed 100 mm/sec
working feed 10,0 mm/sec
return speed 92,0 mm/sec
table width 90,0 mm
table height 910 mm
oil volume 105 l
0 283 bar
controlled axis 8 Anzahl
Number of working hours ca. 25.600 h
total power requirement 7,5 KW
weight of the machine ca. 6750 kg.
range L-W-H 3680 x 2185 x 2635 mm
27u8uf
** good / well-kept condition (!!)
** only 25.600 operating hours...
8