Used Amada Vipros 255 for sale (225)

Condition: ready for operation (used), Year of construction: 2001, overall weight: 9,200 kg, pressing force: 20 t, stroke length: 1,350 mm, controller manufacturer: AMADA, This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine. Additional equipment • Next to the machine, there are 2 tool cabinets Machine Benefits Technical Machine Benefits • Overall response time (machine + safety barrier): 450 ms • Minimum safety distance: 1. 6 m • Maximum width of guarded area: 30 m • Machine stopping time: 430 ms • Machine stopping distance: 190 mm • Voltage / frequency: 400 v / 50 hz • Nominal current: 40 a • Number of phases: 3 • Rated power (energy consumption): 20 kw Hfjlhjx D If Hecdw Nof • Noise level: 117 db(a) Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2002, Model .Amada. Vipros 368 King Stock number 01967 Year of manufacture 2002 Frame Construction ... Bridge Type Press Capacity ... 30 Tonnes (294 kN) Press Type ... High Speed Hydraulic Servo Ram Axis Traverse Distance ... 1525 x 2000 mm Workable Max. Sheet Size ... 1525 x 4000 mm (with auto repositioning) Max. Material Thickness ... 3.2 mm mild steel Max. Hole Dia. Max. Material ... . (shearing strength 36 kg/mm2) 82 mm dia Max. Material Weight ... 75 Kg Max. Material weight ( Max. Speed) ... 60 Kg Max. Hole Dia. ... 114.3 mm Number Of Stations ... 58 stations:24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm Helhovn D Tfscdw Nsff 2 x 114.3 mm Axis Speed ... 113.0 m/min Hits Per Minute (2mm pitch) ... 860 H.P.M./3 mm stroke (8mm pitch) ... 560 H.P.M./3 mm stroke (25mm pitch) ... 460 H.P.M./3 mm stroke Turret Speed Bi-Directional ... 30 R.P.M. Punching Accuracy ... ± 0.1 mm (incl. 1 reposition) Ram Stoke Length (maximum) ... 40 mm Tool Lubrication ... Air Blow System Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 28 kVA 400V +/- 10% 50Hz Air Pressure Required ... 5.0 Kgf/cm2 Air Flow ... 250 1/min Cooling Water Flow ... Min 40 1/min. Machine Length ... 5025 mm Machine Width ... 4120 mm Machine Height ... 2630 mm (3190 mm to mirror) Machine Weight ... 18000 Kg

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: FANUC, controller model: 18-P, This CNC punching machine was manufactured in 2001. It features a working area of 1525 x 2000 mm and includes a total of 57 stations, with various configurations for different applications. Consider the opportunity to buy this AMADA's Vipros king CNC punching machine. Contact us for further details. • Working area: 1525 x 2000 mm • Turret: 57 stations total • 23 A stations • 26 B stations • 4 C stations Hjlhoyitccocdw Nsff • 2 D stations • 2 E stations • 2 x index table

Condition: excellent (used), Year of construction: 2001, Used High Quality, Very Clean and Fully Serviced Large Format Amada Vipros King 368 Cnc Punch Press For Sale Complete With 1600 Throat To Process 3metre x 1.5metre Sheet Metal year 2001 price POA specification 30 TONS CAPACITY 58 STATION 4 AUTO-INDEX HYDRAULIC CNC PUNCH PRESS COMPLETE WITH LKI MP3000 LOAD -UNLOAD MANILPULATOR description CAPACITY 30 TONS TYPE BRIDGE FRAME SERVO CONTROLLED HYDRAULIC RAM BRIDGE FRAME SERVO CONTROLLED HYDRAULIC RAM CONTROL FANUC 18P MAX AXIS TRAVEL 1525 X 2000 MAX SHEET SIZE 1525 X 4000 MAX SHEET THICKNESS 3.2MM 58 STATIONS THICK (H) 24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 1 x 88.9 mm AUTO-INDEX STATIONS 2 X 31.7mm 2 X 114.9mm MAX SHEET WEIGHT 150 KG 120 KG AT MAX SPEED MAX HIT RATE 860 STROKES PER/MIN POWER AND AIR REQUIRED 30 KVA 400V +/- 10%50 Hz AIR 5.0 kgf/cm/2 AIR FLOW 250 L/MIN COOLING WATER FLOW Min 40 1/min Helher D R Ruscdw Nsff WEIGHT 14000kg SERIAL NO. MAX SHEET SIZE 3000mm X 1500mm MIN SHEET SIZE 1000 MM X 300mm SHEET THICKNESS RANGE 0.5mm – 6.0mm MAX LIFT CAPACITY 170 KG WITH DOUBLE SHEET DETECTION MAX PALLET LOAD 3000KG POWERAND AIR REQUIRED 10 KVE AIR 6 BAR FLOW RATE 650L/MIN

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Amada CNC-controlled turret punching machine, type VIPROS 368 KING. The machine is equipped with a loading system type PR 300 and an unloading system type MP 300. Hfslhcdox Sq Ipsw Nef

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING Hfslhcdsm Ncayew Nof The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: ARIES -255, overall weight: 10,400 kg, Used AMADA Aries 255 sheet metal processing center (year 1998) for sale. Working area 1250x2500 mm (without repositioning 1250x1250 mm). In working condition, located in Estonia (testing possible). The included tools are marked in the photo. Price: 10,000 EUR + VAT. Transport not included in the price. Holhcdoxxiv Asw Noff

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, travel distance X-axis: 2,500 mm, CNC punching machine with fully automatic loading system TECHNICAL DETAILS Control: CNC AMADAN 04 P-C Automation & Safety Loading system: LKI L III 250 automatic loader Unloading system: PR III automatic unloader Sorting: Automatic part sorting on pallets possible Noise protection: Noise protection hood Safety equipment: SICK photoelectric sensors, original safety fences Processing capacity Punching force: 30 t Max. material thickness (steel): 8 mm Working area: 3,000 mm X-axis travel: 2,500 mm Table system Table type: Brush table for quiet operation and scratch-free processing Repositioning: Automatic sheet repositioning Tool lubrication: Air Blow automatic lubrication Punching Pneumatic punches: 2 pieces MACHINE DETAILS Power supply: Three-phase Overall length: 15,000 mm Total width: 5,000 mm Total height: 2,000 mm Punching machine weight: 16 t Loader weight: 2.3 t EQUIPMENT - Automatic loader LKI L III 250, built in 2011 - Automatic unloader PR III - Noise protection hood - SICK photoelectric sensors - Original safety fences - Brush table - Automatic sheet repositioning - Air blow lubrication - Two pneumatic punches Further technical details according to the manufacturer - without guarantee Ram stroke: 31.9 mm Max. hole diameter: 114.3 mm Punching frequency (X/Y direction) Stroke length: 8.0 mm – Pitch: 25.4 mm – Stroke frequency: 300 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 25.4 mm – Stroke rate: 375 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 2.0 mm – Stroke rate: 600 / 600 strokes/min Helswc S R Hehcdw Neff Tool turret Tool type: Amada Thick Turret Turret speed: 25 rpm Turret capacity: 58 stations (4 of which are auto-indexable) Accuracies Punching accuracy: ± 0.10 mm Positioning accuracy: ± 0.025 mm Repeat accuracy: ± 0.025 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Helhcdwoxn Rvij Noff Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 108,000 h, laser power: 4,000 W, sheet thickness (max.): 6 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,875 mm, travel distance Z-axis: 380 mm, punching force: 30 t, TECHNICAL DETAILS Punching force: 300 kN Maximum laser continuous output: 4,000 W Travel range punching mode (X-/ Y-axis): 3,050 / 1,875 mm Travel range laser mode (X-/ Y-axis): 2,550 / 1,525 mm Travel range combined mode (X-/ Y-axis): 2,500 / 1,500 mm Travel range laser axis (Z-axis): 380 mm Maximum material thickness: 6 mm Maximum table load: 220 kg Traverse speed (X-/ Y-axis): 100 / 80 m/min Simultaneous axis traverse speed: 128 m/min Positioning accuracy: +/- 0.1 mm Number of turret stations: 45 (4 driven) Turret rotation speed: 30 rpm Maximum punching strokes: 780/min Parts chute dimensions: 400 x 1,525 mm Laser gas consumption: 10 l/h Laser wavelength: 10.6 μm Beam divergence: < 2 mrad Number of controlled axes: 7 (X/YP/YL/Z/T/C) MACHINE DETAILS Control model: AMNC-F Resonator: FANUC AF4000E Table type: Brush table Machine frame: Bridge construction Press drive: Servo-electric Turret and table drive: AC servo motors Monitor: 14" LCD Memory capacity: 10 MB Flash ROM Storage drive: 3.5" HD, CD-ROM Interfaces: USB, RS 232, Ethernet Machine weight: 29 t Hjloyx Hiiehcdw Noff Operating hours: approx. 108,000 h EQUIPMENT Parts chute Air Jet vacuum Barcode reader Wedge leveling elements Sheet deformation sensor "Punch and Forming" Integrated quadruple thread tapping unit M8 Quick-change system for nozzles and lenses Automatic focus system Automatic gas pressure control High-pressure cutting equipment (CleanCut) Aluminum cutting device (AluCut) Exhaust extraction system Cooling unit

Condition: excellent (used), Year of construction: 2005, pressing force: 50 t, Hydraulic Press Brake Manufacturer: AMADA Model: HFP 50-20 Year: 2005 Technical Data Make: AMADA Model: HFP 50-20 Year of manufacture: 2005 Working length: 2090 mm Pressing force: 50 t Frame gap: 1,665 mm Stroke: 200 mm Throat depth: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Hfjlhotzcxpjcdw Nef Weight: approx. 4.8 t Equipment • Controlled axes: Y1, Y2, X, R, Z1, Z2 • FIESSLER light curtain at front • Amada upper tool clamping system • CNC control: 3D AMNC Graphics • Rear safety guard (swiveling mesh doors) • Swiveling operator panel – front left • Tooling: o Upper tool: straight, R 0.8 mm, H 117 mm, length 2,000 mm o Lower tool: V10/88°, length 2,000 mm All information without guarantee. Additional tooling available in attached PDF. A demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 80,162 h, pressing force: 51 t, stroke length: 200 mm, controller manufacturer: AMADA, controller model: Operateur, number of axes: 8, This 8-axis AMADA HFBO 5020 press brake was manufactured in 1998. It features a bending length of 2090 mm and a press capacity of 500 kN. The machine includes a stroke of approximately 200 mm and an open height of around 480 mm. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 5020 press brake we have for sale. Contact us for further details. • Stroke: approx. 200 mm • CNC control: OP-2 CNC • Controlled axes: 8 (Y1, Y2, X1, X2, R1, R2, Z1, Z2) • Open height: approx. 480 mm • Throat depth (frame throat/gap): approx. 400 mm • Distance between uprights: approx. 1,665–1,690 mm • Table width (bottom beam width): 60 mm • Working height (table height from floor): 910 mm • Max. hydraulic pressure: 270 bar • Number of cycles: 4 cycles/min (at nominal conditions) • Main motor power: 4.5 kW Hslhcdsy Alvpow Njff Technical Specification Bending Length 2090 mm

Condition: excellent (used), Year of construction: 1999, actuation type: hydraulic, working width: 3,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, back gauge speed R-axis: 100 mm/s, power: 5.5 kW (7.48 HP), Equipment: documentation/manual, We offer this very good AMADA PROMECAM GS 630 hydraulic guillotine shear, year of construction 1999. If you have any questions or need more information, feel free to send us a message or give us a call. CUTTING LENGTH: 3050 MAX THICKNESS MS: 6mm Holhey Ax N Njcdw Nsff MAX THICKNESS SS: 4mm BACK GUAGE LENGTH: 1000mm BACK GUAGE: PROGRAMMABLE POWER SPEED 100M/PER/MIN MOTOR POWER: 5.5KW

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm Hslhcsyz Dgwodw Nsff dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. Holhceyz Scgjdw Noff The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Technical Machine Benefits • Suitable for heavy-duty operations. Extra Information The machine is currently not under power Dimensions Machine Depth 6400 mm

Condition: ready for operation (used), Amada Apelio II 305072 – CNC Turret Punch Press Amada Apelio II 305072 CNC Turret Punch Press | 30T | 1270×3660mm | 58 Station Amada Apelio II 305072 CNC Turret Punch Press in excellent working condition. A proven, high-capacity sheet metal machine ideal for production environments and precision punching jobs. 🔧 Key Specifications: Punching force: 30 Ton Max sheet size: 1270 × 3660 mm (with repositioning) Hjlheyz T Dljcdw Neff Table size: 1270 × 1830 mm Turret: 58 station (incl. auto-index stations) Max sheet thickness: ~6 mm (mild steel) Control: AMADA / FANUC (model dependent) High-speed stroke rate for efficient production ⚙️ Features: CNC controlled for precision and repeatability Thick turret tooling system Suitable for a wide range of sheet metal applications Reliable AMADA build quality 🏭 Applications: Sheet metal fabrication Enclosures, panels, brackets General engineering production

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Hfolhju A Dgrscdw Njf Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), functionality: fully functional, Sheet width: 2,500 mm Sheet thickness: 4 mm Machine weight approx.: 5,000 kg Space requirement approx.: 3,000 x 2,000 x 1,700 mm Accessories/equipment: - Sheet holding device - Angle stop - 3x support arms - Foot switch Hfjljyz Rv Eohcdw Njf - Light barrier

Condition: used, sheet width 2500 mm Hslhcdweyz Ddpj Njff plate thickness 4 mm weight of the machine ca. 5.000 kg dimensions of the machine ca. 3000 x 2000 x 1700 mm

Condition: excellent (used), Year of construction: 2013, Model Amada HFE MK2 80 x 2500 , 8 axis Press Brake Year 2013 Tonnage 80 tonnes Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Hfolhcsy Amd Uodw Nef Open Height 470 mm Throat Depth 420 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, Hydraulic Press Brake Hfoljyyykcehcdw Nof Manufacturer: AMADA Model: HFE M2 8025 Year: 2012 Technical Details Manufacturer: AMADA Model: HFE M2 8025, 4 AXES Year of manufacture: 2012 Pressing force: 80 t Bending length: 2,570 mm Stroke: 200 mm Distance between uprights: 2,125 mm Installation height: 470 mm Throat depth: 420 mm Table width: 60 mm Table height: 960 mm Approach speed: 1 – 100 mm/s Working speed: 1 – 10 mm/s Return speed: 1 – 100 mm/s Motor power: 9 kW Oil capacity: 90 L Max. pressure: 300 bar Dimensions: approx. L 3.70 x W 1.75 x H 2.55 m + 2x tool cabinets Weight: approx. 6.4 t + 2x tool cabinets with tools Features • Controlled axes: Y1, Y2, X, R • AB-PAD numerical control with touchscreen • Fissler safety laser light barrier at the front • Sheet supports at the front • 2 x tool cabinets • Large package of tools as shown in the photos • Service manuals • Documentation All information provided without guarantee. A powered demonstration at our showroom is possible at any time.

Condition: good (used), Year of construction: 1999, pressure 80.0 t chamfer lenght 2570 mm distance between columns 2125 mm column arm 420 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec stroke 200 mm dayligth 470 mm table height 960 mm Number of working hours ~ 33.100 h oil volume 90.0 l total power requirement 9.0 KW weight of the machine ca. 5750 kg. range L-W-H 3630 x 2450 x 2550 mm Equipment: - AMADA CNC control, model OPERATEUR II * Manual control for fine adjustment of the axes Hfeleyyc Dfohcdw Nof - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid) - Side safety guard (safety doors) - CE marking - Original operating instructions * Further technical data : Adjustment range : X axis ... 700 mm X axis with workpiece in place ... 1020 mm R axis .. 250 mm Adjustment speed : X axis .. 500 mm/sec R axis ... 160 mm/sec Z1 Z2 axis .. 1000 mm/sec Positioning accuracy ± in mm : X axis .. 0.1 R axis .. 0.1 Z axis .. 1.0

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Helhcdjyzy D Ejw Nsff Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: ready for operation (used), Year of construction: 1991, Immediately available ex works: CNC press brake Amada Promecan Model HFBO 125/40 Year of manufacture: 1991 Control system renewed in 2024 Delem DA 58 control Pressing force: 125 t Working length: 4200 mm Frame gap: 2700 mm Throat depth: 410 mm Stroke: 180 mm Drive: 11 kW Working speed: 8 mm/s Weight: 10 t Many tools included Price: EUR 10,500— plus VAT, ex works Hjlhcdoy Alq Tsw Njff

Condition: good (used), functionality: fully functional, total length: 4,000 mm, total width: 2,000 mm, total height: 2,800 mm, overall weight: 7,500 kg, FOR SALE: Amada HFB 125/30 Press Brake Available for purchase: a true industry workhorse, the Amada HFB 125/30. Known for its exceptional precision and reliability, this machine has been well-maintained and is ready for demanding production environments. Technical Specifications: Press Capacity: 125 tons Bending Length: 3000 mm Year of Manufacture: approx. 2001 Hfolhcdwey Athyo Njf Controller: Operateur CNC (multi-axis control) Stroke Length: 200 mm Open Height: 450 mm Key Features: Precise and efficient down-stroking operation. Versatile multi-axis backgauge for complex setups. Rigid frame design ensuring consistent angles across the full length. Well-maintained and in full working order.