Used Amada Vipros 255 for sale (215)

Condition: excellent (used), Year of construction: 2002, Technical specifications: Retrofit in 2026 Working length: 4100 mm Distance between uprights: 3700 mm Press force: 220 tons CNC control: CD2000 (new) Color screen size: 14" Controlled axes: Y1/Y2; X; R Motorized adjustable back gauge Overhang: 300 mm Isdpfx Aksznl U Tsxoba Stroke: 200 mm Automatic crowning Motor power: 20 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17.5 tons Accessories: Segmented AMADA tools, new Lateral safety devices Condition: The machine is in very good overall condition Only approx. 7,500 operating hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2011, punching force: 31 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, controller manufacturer: FANUC, number of axes: 2, This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Working area with repositioning: 5000 x 1525 mm • Max. sheet thickness: 4,5 mm (mild steel) • Feed rate X/Y: 100 / 80 m/min (128 m/min simultaneous) • Positioning tolerance: +/- 0,1 mm • Z-turret stations: 45 • AutoIndex stations: 4 (2 x B, 2 x C) • Turret feed rate: 30 1/min • Max. number of hits: 1000/min • Machine frame: Bridge frame • Punching drive: Servo-electric Twin Drive • Drives (turret + table): AC-Servo motors Ibodpfox D Hpqjx Akxea • Clamps: Pneumatical • Electrical connection: 400V / 50Hz • Electrical consumption: 1 kW – 7 kW • Air consumption (machine): 250 l/min • Air consumption (Air Jet Vakuum): 250 l/min Additional equipment • Loading unit: Loader L III 300 • Sheet size min.: 1000 x 300 mm • Sheet size max.: 3000 x 1500 mm • Material thickness: 0,5 – 8,0 mm • Max. loading weight: 300 kg • Max. stack height: 300 mm • Max. pallet weight: 4000 kg (2x2000 kg) • Max. feed rate (traverse): 70 m/min • Number of suction cups: 34 pieces • Double sheet control: Yes, with sheet thickness detector • Air consumption: 510 l/min, 6 bar inlet pressure • Electrical connection: 400V • Unloading unit with Parts Remover: PR 3 UL 300 P • Part size min./max.: 150 x 150 mm / 2500 x 1000 mm • Sheet thickness: 0,5 – 3,0 mm (4 mm for EM-Serie) • Max. part weight: 50 kg • Storage table size: 3400 x 1400 mm • Max. part size for unloading clamps: 3000 x 1500 mm • Max. stack height skeleton table: 450 mm • Max. weight skeleton table: 2000 kg • Max. stack height storage table: 450 mm • Max. weight storage table: 4000 kg • Max. feed rate X-/Y-direction: 180 / 90 m/min • Air consumption: 1000 l/min, 6 bar inlet pressure • Electrical connection: 400V

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: C 97 12 06, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 1,050 mm, overall weight: 6,500 kg, number of support arms: 2, Equipment: angle stop, Hydraulic shear – AMADA, GPX 630 model. Cutting length: 3100 mm x 6 mm, fully CNC controlled. Adjustable blade angle and blade gap, set by the computer after entering the material thickness and length. Sheet metal cutting range: 0.4 - 6 mm. CNC back gauge with a travel distance of 10 - 1050 mm, retraction, and programmable. Machine with automatic support for long sheets of cut metal at the rear. Raising and lowering rear back gauge. Machine weight: 6.5 tons. 2 supports and a square bar at the front of the machine. The shear is regularly serviced. The machine has been used sporadically for the past 10 years. Service documentation and the machine manual are available. Ibodpjzdzkcofx Akxsa If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Iodpfx Akjyfl U Nsxjba

Condition: used, Amada Chip Conveyor Condition: Used, inspected, and ready for operation Technical Data Isdpjzhuucofx Akxeba Scraper Conveyor Infeed width: 720 mm Infeed length: 1,850 mm Infeed height: 390 mm Discharge height: 450 mm Dimensions: 3200 x 1000 x 1000 mm Weight: approx. 470 kg

Condition: good (used), Year of construction: 2012, Used 3-meter CNC press brake from Amada Ijdpfx Akszd S A Nsxsba Type: HD 1003 NT Capacity: 3100 x 100 tons Year of manufacture: 2012 Servo-hydraulically controlled AMNC control system X1, X2, R, Z1, and Z2 CNC controlled Akas Fiesller laser safety system

Condition: ready for operation (used), Year of construction: 2016, punching force: 20 t, total height: 2,161 mm, total width: 5,120 mm, sheet thickness (max.): 3 mm, overall weight: 13,000 kg, controller manufacturer: FANUC, controller model: Series-31i-P MODEL B, product length (max.): 4,152 mm, This 3-axis AMADA AE-2510NT CNC punching machine was manufactured in 2016. It features a punching force of 200 kN and a working area of 2500 x 1270 mm. The machine includes a turret capacity of 51 stations and a maximum punching speed of up to 370 hits/min. If you are looking to get high-quality punching capabilities, consider the AMADA AE-2510NT machine we have for sale. Contact us for further details. • Status: Connected under power, fully operational, regularly maintained; can be inspected under power • Documentation: Complete machine documentation available • Tools: Tools visible in photos included (see Additional equipment) • Working area (X x Y): 2500 x 1270 mm • CNC axes: X, Y + Auto Index turret stations • Turret capacity: 51 stations Ibodozfp Ixspfx Akxsa • Positioning accuracy: ±0.10 mm • Max feed rate: X 80 m/min; Y 60 m/min • Max punching speed: up to 370 hits/min • Marking speed: up to 900 hits/min • Table: Brush table • Slug removal: Power vacuum slug removal system • Capabilities: Forming, embossing, marking • Electrical: 19 kVA; 3 x 200 V, 50 Hz • Noise level during punching: 95.9 dB(A) • Condition: Very good Additional equipment • Automatic loading/unloading system: LKI Kaldman MP-2512 SheetCat (2015) • Function: Automatic sheet loader and unloader with loading and unloading pallets • Max sheet size: 2500 x 1250 mm • Power consumption: 4.5 kW; Electrical: 3 x 400 V, 50 Hz • Air consumption: 650 l/min at 6 bar • Dimensions (SheetCat): 5,100 x 3,580 x approx. 3,100 mm • Weight (SheetCat): 3,630 kg • Transformer • Tooling: Tool set as visible in photos • Documentation set • Overall line footprint (press + SheetCat): 10,850 x 6,900 x 3,190 mm; pass line height 1,040 mm

Condition: used, Amada Mega BS 400 SA, with swivel base, Dec 1989 Ibsdpfx Akex Rkycjxsa

Year of construction: 2021, condition: ready for operation (used), total width: 1,200 mm, total height: 2,300 mm, product length (max.): 1,200 mm, Automation system manufactured in 2021. This AMADA Jupiter System features a PLC controlled micro resistance welding technology with a workspace of 624 × 550 mm and a maximum welding area of 540 × 450 mm. It includes advanced capabilities such as welding automation, vision inspection, and data connectivity. If you are looking to get high-quality battery pack welding capabilities, consider the AMADA Jupiter System we have for sale. Contact us for further details. 40x units of Jupiter systems available (considered as a whole): welding automation includes the XYZ portal control system, welding control, welding monitoring, vision system, and data connectivity. Cooling units are not included. AMADA Jupiter Advanced Battery Pack Welder (2021) General • Model: Jupiter Advanced Battery Pack Welder • Condition: Very Good / Well Maintained • Machine Dimensions: 1,200 × 1,200 × 2,300 mm • PLC Controlled System • ISQ / MNC Welding ControllerMachine Type • Automated Micro Resistance Welding System • Battery Pack / Battery Module Welding SystemWelding Technology • Micro Resistance Welding • Frequency: 10 kHzWorking Area • Workspace: 624 × 550 mm • Welding Area (max.): 540 × 450 mm • Vision Area (max.): 540 × 450 mmPerformance • Welding Cycle Time: 1.8 sec (weld point to weld point) • Vision Inspection Time: 1.2 sec (vision point to vision point) • Operating Hours: range of 5,000–40,000 hElectrical Data • Power Supply: 400 VAC • Main Fuse: 40 A • Power Consumption: 2 kVAPneumatics • Compressed Air Requirement: 6 bar clean dry air Optional Equipment, not included • Robot Loading System • Vision System • SQL Database Traceability • Electrode Holders • Spare Electrodes Optional Robot Loading System General • Application: Automatic Loading / Unloading of Battery Packs • Integration: AMADA Jupiter Welding System • Robot Loading Machine 25Equipment • Automatic Part Handling • Integrated Vision Inspection • Integrated Welding Process Optional: 3x ASIC Robotics Steckautomat V (2022), price on request General • Manufacturer: ASIC Robotics AGApplication • Automatic insertion / assembly of battery cells • Suitable for 18650 cells • Suitable for 21700 cellsCompatible Cell Holder Types • Senec V2 • StreetScooter V6 • Ocado • LightyearPerformance Iodpfezdrazox Akxoba • 1 × 4 cells simultaneously: approx. 1.0 sec/cell • 2 × 2 cells simultaneously: approx. 1.0 sec/cell • 4 × 1 cell: approx. 1.3 sec/cell • Technical efficiency: 95%Electrical Data • Voltage: 3 × 400 / 230 VAC • Frequency: 50 Hz • Fuse Protection: 25 A • Supply Cable: 6 mm²Pneumatics • Operating Pressure: 6–10 bar • Air Connection: Ø14 plug connection • Air Quality: Dry and oil-freeDimensions • Machine Height ASIC Roboter incl. Signal Tower: 2,720 mmWeight • Approx. 2,100 kgEnvironmental Conditions • Ambient Temperature: +5 °C to +40 °C • Relative Humidity: 45–85% non-condensingNoise Emission • Average Noise Level: 75 dB(A)

Condition: used, Year of construction: 2016, Amada M2 RI 3015 for sale Low hours Full service completed with Amada 4Kw Resonator Dust extraction Chiller Compressor Latest Amada touch screen control Erwin Sick perimeter guards Head clean system Iedpfx Aozh E Hvjkxsba Really good machine.pplease feel free to contact me if you have any additional questions open this machine. Thankyou for taking time to look at this CO2 laser with rotary system

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec Ibodpfx Akjyz Dgwjxea return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Condition: used, functionality: fully functional, Year of construction: 2008, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, The machine is in good condition, fully functional, and can be tested on site. Ibodpfx Aozkgf Ejkxoa

Condition: refurbished (used), Year of construction: 2008, Used AMADA press brake: Illustrative image, machine in stock but not yet prepared. It will be in the same condition once it has been refurbished. Year: 2008 Type: HFE400-4L Ibedpfozbg Sbex Akxja Capacity: 4000 x 400T Number of axes: 6 Stroke of cylinders: 350 mm Rapid traverse speed: 100 mm/sec Installation of new, high-tonnage tooling along the entire length Machine completely refurbished upon order.

Condition: good (used), Matrices, 100 mm x 2 Offset punches x 2 Ibodpfx Aezaitrokxsa In good condition

Condition: good (used), Rear back gauge fingers for Promecam press brakes, adjustable in height. Sold as a complete set or in pairs. Ibsdjzagq Uopfx Akxoa

Condition: excellent (used), Year of construction: 2014, operating hours: 7,998 h, machine/vehicle number: 43610191, sheet thickness aluminum (max.): 6 mm, We are offering an Amada EML 3610NT punch laser combination machine for sale. The offered machine is used and in a very good condition. Main features of the machine (overall): - Possibility of combining punching and laser burning - automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and exchange of pallets during the operation of the machine Iodpsum R T Sjfx Akxoba - automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of sheet loading during machine operation - automatic bale delivery 1500x400mm (two conveyor belts for details) - turning station with 41 fixed and 4 rotating stations - 3 manually adjustable paws - cutting elements on length 3020x1500 - Laser cutting length 2000x1500 - max. sheet thickness 6mm (due to brush table) - thread function - pneumatic hold-down device Accessories for the machine: - Light barrier - Thread cutting set - Sensor for bale chute - System for chip extraction - Separate lubrication of punching and threading tools - Bending sensors for sheet metal - A conveyor belt that pulls out the punching waste Machine data as of 17.09.2024 - Time of the running machine: 7998 hours - Operating time: 2972 hours - Cutting time: 1196 hours - Working time of the resonator: 6154 hours AMADA EML3610NT - Max. Cutting force: 300 kN - Power (laser efficiency): 4kW (CO2) - Type: EML-NT - No. 43610191 - Model:EML3610NT - Year of manufacture: 2014 November - Total value of the connection to the network: 400V/68.3 kVA - Connected load: 85 kVA - Compressed air connection: 8 bar; 48 m3/h - Width of the guarded area: 30m (max) - Minimum safety distance: 1.36 m - Response time of the machine + total response time of the firewall: 320ms - Stop time: 300 ms - Machine braking distance: 180mm - Weight of the punching/laser machine: 24,000 kg PRIII (reception of finished parts) - Model: PR III 300 L 2P - No.: 2424 - Year of construction: 2013 - Connection to the network: 400/50V/Hz - Max. Power supply: 8.5 kW - Compressed air connection: 6 bar 1000 l/min. - Dimensions and weight of the elements to be collected: Workpiece thickness from 0.5 to 3mm Min.150x150mm max. 2500x1000mm with a weight of no more than 45kg - Machine weight (PRIII): 4600 kg ASIII MP (sheet feeder) - Model: ASIII MP 300 - No.: 2994 - Year of construction: 2015 - Connection to the network: 400/50V/Hz - Max. Power supply: 12kW - Compressed air connection: 6 bar 1000 l/min. - Size of sheets that can be stored: Max. 3000x1500mm Minimum steel thickness 1000x300mm from 0.5 to 8mm Weight of a single sheet no more than 300kg - Machine weight (PRIII): 12 000 kg The price is for the entire machine only. The price does not include Tools, dismantling, transportation and commissioning If you have any further questions, please do not hesitate to contact us. The machine is offered in different sources. If you are interested, please confirm availability.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 100 h, Equipment: type plate available, Amada GS II 630 EVO sheet metal shear model year 2018, Working width 3050mm, max sheet thickness steel 40-45kg/mm2/6.35mm Max. sheet thickness stainless steel 60kg/mm2/4mm, aluminum max. sheet thickness 30kg/mm2/8mm. Accessories Side guide front stop beam 1m, Front stop beam 1m 2pcs, Standard lever stop 2pcs, Ball support 1.5m 3pcs. Cutting quantity 15,000 times. Pump operating hours 100h. Very little used Ibsdpfjziviwjx Akxea

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: 7520536, input voltage: 110 V, input current: 20 A, input frequency: 60 Hz, Metal stamping machine for sale, running conditions. Ibsdpfx Akozrkumsxoa

Condition: excellent (used), Year of construction: 2008, Technical data: Working length: 6100 mm Distance between stands: 5230 mm Press force: 400 tons CNC control: OPERATOR II graphic TFT screen 14" Number of controlled axes: 8 Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Stroke: 350 mm Overhang: 420 mm Laser monitoring Motor power: 38.5 kW Iedpfxoy D Sb Us Akxoba CE marking Dimensions (length x width x height): approx. 6300 x 2500 x 3600 mm Weight: approx. 36.5 tons Note: Table extends approx. 450 mm into the floor Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: Very good condition Only 5,500 operating hours In the meantime, we have stored the machine and disassembled the table The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: N000615, functionality: fully functional, operating hours: 4,626 h, power: 14.8 kW (20.12 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 180 mm, table length: 3,220 mm, table height: 960 mm, throat depth: 420 mm, oil tank capacity: 295 l, total length: 4,360 mm, total width: 2,660 mm, total height: 3,050 mm, overall weight: 15,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, safety light barrier, See above. Iedpozkhvlsfx Akxsba If you have any further questions or require additional details, please contact us directly.

Condition: used, Year of construction: 2003, table length 5040 mm table width 1550 mm 12 mm plate weight max. 330 kg travel -x axis 2520 mm travel -z axis 300 mm travel -y axis 1550 mm cutting speed 20 m/min feed speed X/Y/Z 80/80/60 m/min positioning accuracy +-0,01 mm/500 mm mm repeatability +/- 0,005 mm table height 820 mm size of opening 550x1550 mm compressed air 6/20 bar total power requirement 10 kW weight of the machine ca. ca. 6,5 t dimensions of the machine ca. 2,5x5,7x2,3 m Turbo blower replaced at 36,000 hours Compressed air dryer Alphapac 0015 SP Basement flue gas extraction type Vario T 1.5A Ijdpfx Aovxwytokxjba Air conditioning unit RIEDEL PC 315.21-NE-LAS Laser radiation within class 1 The machine was regularly serviced

Condition: good (used), Year of construction: 2008, Used 6-meter CNC press brake by Amada Type: HFE 400 6 L Capacity: 6100 x 400 tons Stroke: 350 mm Y1, Y2, X1, X2, R1, R2, Z1, and Z2 CNC controlled 9204 operating hours Weight: 36 tons Transport in 2 parts (main frame + separate lower table) Self-adjusting crowning system in the lower table Ibjdpsy T Hltofx Akxoa 450 mm mounted on the floor foundation Dismantling and loading included

Condition: good (used), Year of construction: 2007, functionality: fully functional, controller manufacturer: Amada, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, FOR SALE: Amada HPF 100-3 CNC Hydraulic Press Brake Isdjy Hf Tpopfx Akxeba Amada HPF 100-3 – Reliable CNC Press Brake for Heavy-Duty Sheet Metal Work We are offering a used Amada HPF 100-3 CNC hydraulic press brake in [good / fully operational] condition. This is a well-established machine from one of the world’s leading manufacturers of sheet metal machinery, ideal for a wide range of industrial bending operations. Key Specifications - Pressing force: 100 tonnes (1,000 kN) - Maximum bending length: 3,100 mm - Distance between frames: 2,700 mm - Stroke length: 200 mm - Throat depth: 420 mm - Open height: 470 mm - CNC control: Amada Operateur / OP 2000 - Number of axes: 7 (Y1, Y2, X, R, Z1, Z2 + crowning) - Motor power: 9–11 kW - Approximate machine weight: 6,750 kg Machine Details - Year of manufacture: 2002 - Condition: Good! - Tooling included Why Buy This Machine? The Amada HPF 100-3 is a robust and precise hydraulic press brake engineered for demanding, high-volume production environments. The Amada CNC control simplifies the programming and storage of complex bending sequences, making it ideal for both batch and repeat production. With a bending length of 3,100 mm and a capacity of 100 tonnes, it covers the majority of industrial sheet metal forming requirements.

Condition: repair required (used), functionality: limited functionality, Year of construction: 2007, operating hours: 31,489 h, control type: NC control, degree of automation: semi-automatic, laser type: CO₂ laser, laser hours: 22,804 h, laser power: 4,000 W, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 3,000 mm, AMADA LC3015 X1 NT – Complete Automated Laser Cutting Cell Ibedpfszi Uc Nsx Akxja -The AMADA LC3015 X1 NT is a fully automated CNC laser cutting cell designed for efficient, high-volume sheet metal production with minimal operator intervention. -The installation includes the AMADA LC3015 X1 NT laser machine, an AS LUL 300 X1 automated tower system, a 4 kW Mitsubishi ML40CFX CO₂ resonator, a Riedel industrial chiller, and a Donaldson Torit extraction and filtration system. -Manufactured in Japan in 2007, the machine offers a working area of 3,000 × 1,500 mm and delivers reliable, precision laser cutting performance. -The 4 kW laser is capable of cutting mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. -The automated tower system features eight storage cassettes with a load capacity of 3,000 kg each, enabling automatic material loading, unloading, and pallet exchange for continuous production. -A vacuum sheet handling system further improves productivity by reducing manual material handling. -The Riedel dual-circuit chiller provides efficient cooling for both the laser source and optical components, ensuring stable operation. -The Donaldson Torit filtration system effectively removes fumes and metal particles generated during the cutting process, maintaining a clean and safe working environment. -This complete AMADA/Mitsubishi solution combines automation, reliability, productivity, and integrated cooling and filtration systems, making it an excellent choice for demanding industrial manufacturing applications.

Condition: like new (used), Year of construction: 2019, AMADA - LCG3015AJ – 2019, like new - Control system: AMADA - Fiber laser, 2100 W - Table size: 3000 x 1500 mm (x2) - Operating time: 300 hours - Documentation available - Weight: 9400 kg - Operational Ijdpfx Asiv S Nqskxeba Due to excessive administrative overhead (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.