Used Amada Astro 100 Nt for sale (225)

Condition: excellent (used), Year of construction: 2004, Automatic bending/folding cell - press brake with bending robot The machine was purchased from AMADA in 2010 as a reconditioned machine and has only a few operating hours Manufacturer: AMADA Model: ASTRO 100 NT Blbkemijiko Year of manufacture: 2004 (purchased from AMADA in 2010 as a reconditioned machine) Control system: AMNC II PC Machine number: 20300050 TECHNICAL DATA: Pressing force: 100 tons Bending length: 3000 mm Tool clamping: AMADA, standard Clearance between uprights: 2700 mm Projection: 415 mm Stroke: 200 mm Installation height: 500 mm Adjustment range backgauge: 600 mm Width of the work table: 60 mm Folding robot: Payload: 20 kg incl. gripper Max. Part size: 1000 x 800 x 2.3 mm (as profile 1800 x 300 x 2.3 mm) Length of linear axis: 3080 mm Max. Material thickness: 0.6 - 2.5 mm Loading and unloading robot: Max. Capacity: 20 kg incl. gripper Number of controlled axes: 6 Raw material stacking height: 500 mm EQUIPMENT and ACCESSORIES: Press brake HDS-1030 Stop sensor system for robot operation ASTRO 100 folding robot Linear axis 3000 mm Loading table with spreading magnets Gripping device ASTRO-MP20 loading and unloading robot Quick-change system for gripper PFB 90 conveyor belt (length: 600 mm, width: 800 mm) ASTRO 100 II Set 1 ASTRO 100 Set 5 ASTRO 100 II Set 3 Gripper package Comprehensive tool package PC with software Safety fence NOTE: The machine has a small defect that sometimes occurs during operation. According to AMADA, a cable and/or a servo motor must be replaced here, then the machine will work properly again. The costs for the repair are EUR 9,293.40 net (offer from AMADA enclosed). Subject to prior sale. Sale under exclusion of any guarantees and within the scope of our general terms and conditions. All information without guarantee.

Condition: good (used), Year of construction: 2010, Operating hours: 15,756 h, Overall weight: 6,750 kg, Input voltage: 400 V, 1000 KN Max. Stroke: 200 Weight: 6750 Noise level: 74 dB Year of construction: 07/2010 Voltage: 400 V / 50Hz Rated current: 15.2 A Current operating hours: 15,756 hours with manual angle measurement and correction system with safety laser UVV inspection at regular intervals / maintenance always by Amada at regular intervals Accessories: Die tool: Ccbu8Xs 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB base for double V die 20.287 + 60.919 835mm Bending weight: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. 4500 €) - separately as replacement Sale only to commercial customers and under exclusion of any warranty!

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, Used hydraulic press brake Brand: AMADA Bns3Hifgbec Model: HD 1003 NT Serial No.: L100004 Year: 2011 Weight: 6500kg Oil tank: 48Ltrs. Folder with 8 axes (Y1, Y2, X, R, Z1, Z2, XS1, XS2) Force: 100Tn Folding length: 3110mm Distance between uprights: 2700mm Neckline: 420mm Cursa: 200mm Aperture: 470mm Fast downhill speed: 120mm/s Speed up/recovery: 120mm/s Folding speed: 10mm/s Promecam mooring with double inner and outer grip. AMADA CNC: AMNC-PC Ver. 5.1. Sick front safety barrier. Includes: - DIGIPRO angle corrector - Complete machine, cnc and Digipro manual.

Condition: good (used), Year of construction: 1996, Pressure 100 t Dprhwr Folding length 3100 mm Stroke max. 470 mm Total power requirement 7.5 kW Amada operator control Accessories: -Amada Operator II control unit -2-Hand-foot operation -Amada-Promecam tool holder -controlled axes: x1,x2,y1,y2,x,R,z1,z2

Condition: excellent (used), Year of construction: 2008, CNC laser cutting machine Amada LC3015 X1 NT 4KW, with 2 exchangeable tables The AMADA laser has been thoroughly tested by an AMADA service technician, is energized and ready for use. Celmn2Ivjb Year of manufacture: 2008 Type: Amada LC3015 X1 NT Laser power: 4kW Table: 3,000 x 1,500 mm Cooler Ridel Extraction Donaldson

Condition: used, Year of construction: 2008, Bending length 3110 mm Max. pressure 130 ton Max. stroke 3530 mm Ciwcvmtwqe Max. daylight 620 mm Controlled on 8 axis: (X1-X2-Y1-Y2-Z1-Z2-R1 & R2) Control: AMNC Equipped with: Lots of tooling

Condition: excellent (used), Technical data: Dpqzcn Working length: 3100 mm Stand width: 2650 mm Pressing force: 100 to CNC control: AMADA OPERATOR II 14-inch TFT color screen controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 motorized adjustable backgauge throat depth: 415 mm stroke: 200 mm Working height: 960 mm crowning Motor power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Year of construction: 2011, Condition: ready for operation (used), General Data Machine weight 18000 kg Dphn9Z Clamping Unit Clamping force 2200 kN Opening stroke Max. 350 mm This AMADA HFP NT 220-4L press was manufactured in 2011. It features a maximum press force of 2200 kN and a stroke up to 350 mm, weighing 18000 kg. A robust choice for heavy-duty operations, the AMADA HFP NT 220-4L machine we have for sale is ideal for your pressing needs. Contact us for more information. Application Types Bending

Condition: used, Year of construction: 2012, Press capacity approx.: 100 ton Bending length approx.: 3110 mm Distance between side frames: 2700 mm Dc0T9Mb Stroke: 200 mm Throat depth: 450 mm feeding speed: 120 mm / sec Return speed: 120 mm / sec Working speed: 10 mm / sec Control: AMNC Term hydraulic: 7200 h Length: 6080 mm Width: 3010 mm Height: 2915 mm Weight of machine approx.: 10200 kg Standard configuration 6-axis back gauge Extended machine accessories bottom tools:UW-16 30° 4x15mm 4x20mm 3x25mm 1x30mm 1x50mm 1x60mm 1x80mm 8x100mmUW-12 30° 4x15mm 4x20mm 3x25mm 1x30mm 1x50mm 1x60mm 1x80mm 8x100mmUW-12 86° 4x15mm 4x20mm 3x25mm 1x30mm 1x50mm 1x60mm 1x80mm 8x100mmUW- 8 30° 4x15mm 4x20mm 3x25mm 1x30mm 1x50mm 1x60mm 1x80mm 8x100mmUW- 8 86° 4x15mm 4x20mm 3x25mm 1x30mm 1x50mm 1x60mm 1x80mm 8x100mmUW- 6 30° 4x15mm 4x20mm 3x25mm 1x30mm 1x50mm 1x60mm 1x80mm 8x100mmUW- 6 86° 4x15mm 4x20mm 3x25mm 1x30mm 1x50mm 1x60mm 1x80mm 8x100mm Upper toolsOW R1 30°: 4x15mm 4X20mm 3x25mm 1x30mm 1x50mm 1x60mm 1x80mm 8x100mm 1x Horn right 1x Horn leftOW R1 86° goat's foot: 4x15mm 4X20mm 3x25mm 1x30mm 1x50mm 1x60mm 1x80mm 8x100mm 1x Horn right 1x Horn left Automation - automatic tool changer

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Machine/vehicle number: HFT 100-3, Total height: 2,700 mm, Pressing force: 100 t, Total width: 2,090 mm, Total length: 3,990 mm, Operating speed: 10 mm/s, Table width: 60 mm, Table height: 960 mm, Bending length: 3,340 mm, Input voltage: 400 V, I have for sale a fully operational and constantly used Amada HFT 100 - 3 press brake Inspection of the press by the manufacturer Amada took place 05/03/2024. Lvakdtef During the service visit was performed: Complete oil change with new oil (46) (TotalEnergies AZOLLA ZS46) Oil filter replacement (H02343) Additional activities, confirming the efficiency of the device.

Condition: like new (used), Year of construction: 2005, AMADA MODEL HFT 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 1O3 L downstroke CNC Press brake Year 2005 Tonnage 1000 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Koxnmhr0 Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 2008, Max. pressure 30 ton Tool storage 45 stations Max. sheet size 5000 x 1525 mm Y/X movements - 1525/2500 mm Strokes pr/min 780 Max. length of stroke 37 mm Automatic tool changer w/45 stations Ciwazzirpq Control: AMNC-F Equipped with: Lots of tooling

Condition: good (used), Manufacturer: AMADA Type: HFE M2 1003 Control system: AB Pad Evolution Year of construction: 2016 Easy to use and simple to program ECO friendly with energy saving 2 Axis backgauge Fiessler laser safe Specifications Metric US Standard Max. bending length 3110 mm Distance between uprights 2700 mm Max. pressing force Cx007Skx 100 T Distance between table supports 470 mm Max. stroke 200 mm Stand projection 420 mm Lowering speed 100 mm/min. Working speed 10 mm/min. Return speed 100 mm/min. X-axis range 1000 mm Number of controlled axes 4 Dimensions (estimate) length 4535 mm width 2580 mm height 2680 mm weight 6600 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Machine/vehicle number: 51020361, Coordinate punching press AMADA AC 2510 NT. Made in Japan. In perfect condition, not used very often. Everything works, complete set. B2Paba8Cbk

Condition: reconditioned (used), Year of construction: 2007, Amada LC-3015 X1 NT - Deflection type (X/Y axis): Flying optics - Travel (X): 3100 mm - Travel (Y): 1550mm - Vertical movement (Z): 120 mm - Cutting speed: 0-30 m/min - Travel speeds: (X and Y axis) 85 m/min, (Z axis) 25 m/min - Position Tolerance: (X/Y axis): 0.005mm/500mm, (Z axis): 0.1mm/100mm - Maximum workpiece dimensions: (L x W x H) 3150 x 1525 x 19 mm - Maximum weight allowance: 690 kg - Maximum steel thickness: 20 mm - Maximum thickness of stainless steel: 15 mm (oxygen cut),12 mm (clean cut) - Maximum aluminum thickness: 12 mm - Number of pallets (pallet changer): 2 pcs. - Pallet change time: approx. 25 seconds - Dimensions of the laser cutting machine: (L x W x H) 6670 x 3260 x 2100 mm - Dimensions pallet changer: (L x W x H) 3430 x 2310 x 850 mm - Laser cutting machine weight: 9900 kg - Pallet changer weight: 1800 kg - Power supply: (machine + resonator) 71 KVA - Controller: LC20BP2 laser resonator - Manufacturer: MITSUBISHI - Model: ML40CFX - Nominal power: 4 kW - Stability: +/- 1% - Maximum power: 5 kW - Frequency range: 10 - 3000 Hz - Laser type: C02 laser - Operating hours: discharge 23,000h - Total mirror revision recently done Cbgaiejg9M

Year of construction: 1989, Condition: good (used), Used Amada Promecam ITPS 100/3 multi axis cnc pressbrake with a new Delem DA65-RE control for sale Make Amada Promecam Model Amada ITPS 100 complete with upgraded modern Delem control Db03Xx9J Year 1989 Tonnage 100 Tonnes Max. Bend Length 3080 mm / 3metre Stroke Length 105 mm Approach Speed 80 mm/s Bending Speed 10 mm/s3 CNC Control Delem Type DA65 Controlled Axis 7 (Y,X, R1, R2, Z1, Z2) Backguage Travel (X axis) Backguage Speed (X axis) Backguage Repeatability Display

Condition: like new (used), Year of construction: 2001, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 100/3 downstoke CNC Press brake Year 2001 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control Bfos8Iz2Wrd Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 2010, Amada press brake in very good condition. Can be inspected under power. IMMEDIATELY AVAILABLE! Bending force 2200 kN/ 220T Working length 4280 mm Press beam length 4280 mm Passage between uprights 3760 mm Distance 420 mm Press beam heading 200 mm Minimum increment value 0.01 mm Working speed 10 mm/s Press beam width 180 mm Work table height 960 mm Power 20 kW Machine power supply 400 V Installation height (distance between press beam and top beam) 470 mm Control Touch screen control AMNC-PC Backgauge 5 axles type “B.BL” Angle measuring system infrared DIGIPRO Machine dimensions: Length: 5480mm Depth: 3000 mm Bkv92L7Uxap Height: 3100mm Weight: 17250 kg

Year of construction: 2007, Condition: used, Complete set for sale. AMADA laser cutting machine in good condition, one owner, always serviced by AMADA service representatives on time. All documentation, service reports are included. The laser cutting machine is connected and can be inspected, tested in Vilnius, Lithuania. Specification: Model: AMADA LASMAC LC2415 A4 NT Year of manufacture: 2007 Made: in Japan Power: 4kW Working area (X x Y): 1500 x 3000 Weight: 7.7T Jvsvndym Operating hours: 40,786 Place: Vilnius, Lithuania Testable: Yes If you have more questions, we will be happy to answer them.

Year of construction: 2013, Condition: like new (used), For sale we offer one Amada EML 3610NT punch-laser combination machine. The offered machine is used and in very good condition. technical data: combined laser/turret punch press EML Z-3610 NT, year 11/2014, operating hours: 6118; 45 tool stations, laser power 4 kW, control type: AMNC-F, with resonator unit Amada/Fanuc AF 4000i-C, fabrication no. L14x40295, cooling & refrigeration unit, fume gas and laser dust filter system Herding MP2. -) right side standing automatic plate magazine LKI AS III MP, year 2015, machine weight approx. 12.000 kg -) left side standing vacuum pick-up & stacking device / single sorting PR 3 300 L 2P, year 2013, power consumption 8,5 kW, weight approx. 4.800 kg Cyagqgy9Tq basic dimensions approx. 20 x 10 m, total height (magazine) approx. 6 m The price is only for the machine, without dismantling, transport and commissioning. For further questions we are at your disposal and ask you to contact us. The machine is offered in different sources. If interested, please confirm availability. Errors and prior sale reserved!

Condition: excellent (used), Year of construction: 2011, Power: 4 kW (5.44 HP), MODEL USED AMADA LC 3015 FI NT 4 KW CNC LASER CUTTING MACHINE WITH LST3015 F1 TWIN SHUTTLE TABLE and TOWER SYSTEM FOR SHEET LOAD AND UNLOAD CAPACITY FOR SALE description AMADA LASER MODEL LC3015 F1 4KW AF 4000i-B CONTROL AMNC-PC MAX LASER OUTPUT 4000 / 4KW Year 2008 MAX SIMULTANEOUS FEEDRATE M/PER/MIN (X/Y Bg9Jrmtbman 170M/MIN MAX SHEET SIZE 3070 X 1550 X 100 (Z AXIS) MAX MATERIAL THICKNESS 20 mm M.S. MAX MATERIAL THICKNESS 12 mm MAX MATERIAL THICKNESS ( ALUMINIUM A5052) 10 mm

Condition: refurbished (used), Year of construction: 2003, AMADA MODEL HFE 100-3L LONG STROKE 170 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, screen by passed with monitor ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 100/3 L downstoke CNC Press brake Year 2003 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 7-5 kw Weight 7800 KG kg Bbcvpzjp730 CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm SERIAL NUMBER V V030112 can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2008, AMADA Model HFP 100-3 - Year 2008 Type CNC Multi axis press brake 100 tons capacity x 3100 Serial Number A080073 Control AMNC Bf9Mtlkckg 7 axis machine Length mm 3950 Width mm 1700 Height mm 2750 Weight kg 7100 Electrical 400V, 50hZ Electrical Consumption kW 9 Tool Type Amada Top Tool Clamping Fast clamping Crowning Erwin Sick C 4000 machine mounted electronic safety guard side and rear interlocked fencing Stroke mm 350 Opening mm 370 Between Columns mm 2705 Amada Digipro Handwheel Barcode reader

Condition: ready for operation (used), Year of construction: 2007, This AMADA LC3015X1NT 4kW Co2 (2007) Laser cutting machine was manufactured in 2007. This machine has a 4.0 kW Co2 resonator and can accommodate sheets up to 3000x1500 mm in size. Contact us anytime for further information. Yvm8Si03 Application Types Laser Cutting

Condition: good (used), Amada H-1080 Horizontal Bandsaw Serial No. 750103 Cyzcnp0Az0 Year of Manufacture 1979 Round 800mm, Square 1000mm x 1000mm Input 415/3/50 AC 11 KW Speeds 17-65 m/pm Vice opens 1020mm Front & Rear Vices Rear Roller Tables Length 13’10” (4.22M) Width 8’8″ (2.64M) Height 9’4″ (2.84M) Nett weight approx. 7 TONS (7112 KGS) Upgraded electrics with invertor drive Coolant Pump