Amada ha 500 for sale
Identified location: Ashburn (US) (Edit)
|
2
AMADA band saw machine TYPE HA-500 universal machine for the cutting of metals of all kinds: bars, form tools, tubes - individually and in the bundle.
In automatic mode, an optimum cutting performance is achieved by the secondary is reduced to a minimum times. Piece counter with length measuring device works which cuts HA-500 individual without supervision in the series area of the large - single by the equipment of the machine can, but also to be made. The prefix option of the integrat... more
|
|
11
HAMADA 500 CDA
Year 1988 - Serial-No. HR-6462
-Available immediately- On Stock-
Bfffge3snk
-Can be inspect-
-Can be test- more
|
|
6
cutting diameter 250 mm
saw band length 34 x 1,1 x 3505 mm
cutting width 300 mm
sawing motor 3,7 kW
weight of the machine approx. 1400 kg
Compact and robust fully automatic band saw with stable pivot design for
Bhm0ap7vsy
efficient cutting of solid, structural and hollow materials of all grades,
including Inconel,Hastelloy and titanium,individually and in bundles.
In automatic mode, cutting length and number of pieces can be preselected.
The combined feed pressure system offers the advantage o... more
|
|
2
cutting diameter 250 mm
saw band length mm
cutting width 250 mm
automatic feeds
Nndbp
weight of the machine ca. 0,6 t more
|
|
8
good condition (used)
AMADA 400 HA professional cutting-off machine
-automat
-cutting diameter of the shaft 420 mm
-cut size 400x400
-weight 2200
-Coolant pump
- can be transported to any place in the country
The machine in excellent technical condition ready for operation can be seen in Piaseczno underneath the w-wa
Bhfy39jedn more
|
|
cutting area round: 400 mm
C7kz9nr
cutting area square: 400 mm
simple forward feed length: 0 - 600 mm
sawing band measures:
band speed: 15 - 90 m/min
sawing drive: 380 V, 7,55 kVA kW
space needed: 2650 x 2350 x 1600 mm
weight: 2000 kg more
|
|
5
AMADA CNC ASSISTANT 500
FROM AMADA BENDING MACHINE
FOR SPARE PARTS OR TRANSFORMATION OF
AN EXISTANT MBENDING MACHINE FROM AMADA.
Bawuv0p3sz
FOR SPAREPARTS. more
|
|
4
cutting diameter 500 mm
Nndbf
saw band length 1.800 mm
table height 1.100 mm
rotary indexing table -manual operation
weight of the machine ca. 0,9 t more
|
|
6
Used band saw BEHRINGER HBP 500 in good condition. The electrical system of the saw was renewed in 2017 and the machine can still be demonstrated under power. Cutting are 500 x 500mm.
Mtm99nct more
|
|
3
|
|
1
Highly accurate reference measuring center with extended measuring range in Z
Factory overhaul 06/2018, the measuring device can be customized / retrofitted.
High precision air bearing multisensor coordinate measuring machine
Mahr OMS 800/500 HA with active vibration damping
Technical specifications:
3D multi-sensor instrument MarVision OMS 800/500 HA CNC
Measuring range: approx. 800x800x500mm
optical sensor (camera & laser)
incl. Renishaw TP200 touch probe
Camera with 2-step zoom incl. 10x l... more
|
|
4
2011
ready for operation (used)
General Data
Measurements width 5745 mm
Measurements depth 2630 mm
Measurements height 2789 mm
Machine weight 7700 kg
Main Drive
Laser power 2.5 kW
Max Material Thickness
Steel 12 mm
Stainless steel 3 mm
Aluminium 10 mm
This AMADA LC 2415 Alpha IV NT Laser Cutting Machine was manufactured in France in the year 2011. This machine counts with 12077 operating hours, from which only 7585 are cutting hours. This machine stands out for its potent laser power of 2.5 kW. Machine comes with a complete... more
|
|
6
Working hours machine: 51614 h (new TurboBlower 02.02.18: 50.635 h) h
Laser power: 4000 Watt
Working range laser: 2520 (5040) x 1550 x 300 mm
Max. steel: 12 mm
Max. stainless steel: 10 mm
Max. aluminium: 8 mm
Bczxurbnwz
Length: 5745 mm
Width: 2630 mm
Height: 2789 mm
Machine weight: 7700 kg
Electrical connected load: 65 kVA more
|
|
9
Table length: 2550 mm
Table width: 1550 mm
Workpiece weight: 330 kg
Travel - x 2520 mm
Travel - y 1550 mm
Travel - z 300 mm
Laser power in watts: 4000
Control: FANUC 160i-L
Sheet thickness for steel: 12 mm
Sheet thickness for stainless steel: 6 mm
Sheet thickness for aluminium: 4 mm
Travel speed X/Y/Z 80 m/min
Machine weight approx. 6,600 kg
Accessories/Equipment:
- new Turboblower in February 2019
Bfbauv8nqs
- new vacuum pump in 2019
- Laser source FANUC AF4000E
- Laser duty-on hours: 49,336 h... more
|
|
3
1996
good (used)
X 1270 Y 1270 mm
with reposition 2540 x 1270 mm
max. 9 mm,
with Fanuc cnc 16 iL,
Clean cut (aluminium cutting) aut. Focus,
workpiece chute in table 1270 x 530 mm, 400 v 50 HZ 3 phase
resonator 22,300 hours
Service approx. 1000 hours ago in 6/2017
new turbo,discharge tube, matching box,fan motor, internal optic/mirror.
11/2018 new power supply,
is in very good condiction
( service and parts have cost more than € 30,000 )
Is dismantled and on stock without power
Incl. cooling
Dust f... more
|
|
5
Laser cutting system AMADA LC1212 Alpha IIBconstruction year: 1996 ( 2011 general overhaul)Laser power: 1,5 kWOperating range:X- 1,270 mmY- 1,270 mmZ- 300 mmControl: Fanuc Series 16LCooler Donaldson
N9lvnhwd more
|
|
10
Power 1.5 KW
Longitudinal stroke 2520 mm
Cross travel 1550 mm
Vertical stroke 300 mm
Cutting speed 0 à 20 mm/mn
0ijioukr
capacity in steel 9 mm
capacity in stainless steel 3 mm
Weight 8800 Kg
Capacity in aluminium: 2 mm
Dimensions with repositioning: 5040×1550 mm
Maximum weight of the parts: 330 kg
Repeatability: +/- 0.005 mm
Year: 1997 more
|
|
6
Working hours machine: 51614 h (new TurboBlower 02.02.18: 50.635 h) h
Laser power: 4000 Watt
Working range laser: 2520 (5040) x 1550 x 300 mm
Max. steel: 9 mm
Max. stainless steel: 9 mm
Max. aluminium: 8 mm
Length: 5745 mm
Width: 2630 mm
Height: 2789 mm
Machine weight: 7700 kg
Electrical connected load: 65 kVA
Bg2zpcp8xs more
|
|
2
Make Haagen & Rinau Bremen, Type Unimix SR-500, No 8182, New 1973, Material Stainless steel 1.4541 (321), Working pressure jacket (Bar) 4, Working pressure (Bar) 2, Closed stirring vessel (1x), Capacity 750 Ltr, Vessel sizes dia. 1000x700mm, Dished bottom , Dished top side , With cover (can be lifted hydraulically), With jacket (60 Ltr), Max. temperature 133 Degr. C., With anchor stirrer "scraper stirrer", Motor 5,5 KW, 220/380 Volt, With homogeniser , Motor 11,0 KW, 380/660 Volt, Floorspace 2,4... more
|
|
4
Angle plate, clamping angle, clamping Tower, clamping device, mechanical clamping elements
Angle to the workpiece clamping
500/605/H815 dimensions mm
Wall thickness 37 mm
-gefräste interface
Long holes for the Werstückspannung mm
9sdbczwgd
-1 x angle available
Award pieces
Weight 225 kg / piece more
|
|
turning diameter over bed 520 mm
turning diameter over slide rest 310 mm
turning length 1000 mm
Swing in gap 580 mm
centre height 250 mm
bed width 410 mm
spindle bore 62 mm
spindle flange Camlock Gr. 8
spindle turning speed range 24: 9 - 1800 U/min
Drive 15 kW
weight of the machine ca. 2,75 t
dimensions of the machine ca. 2,8 x 1,3 x 1,3 m
Electric 380 Volt
chuck 300 mm
Cooling equipment
Following centers
Rapid transfer-steel holder " Multifix "
B7b8wwe3
German quality product with c... more
|
|
14
Brand: Haas
Type: MDC 500 HE
Serial number: 1050882
year of construction: 2006
Operating voltage: 400 V
HR: 50-60
Control: Haas
Travels:
X: 508 mm
Y: 356 mm
Z: 508 mm
Table dimensions: 508 X 324 mm
Bhn9n8scyk
Table load: 318 kilo
pallet changing time: 4,7 sec
Spindle speed: 7500 rpm
Feed rate: 25.4 m/min
Rapid traverse: 21.2 m/min
tool changer: 24x
Tool holder: BT 40
Max tool diameter: 76 mm
Max tool weight: 5,4 kilo
Dimensions: 3400 X 3600 X 2800 mm
Weight: 6300 kilo
With screw conveyor, and co... more
|
|
1
|
|
6
used
Heavy duty pallet rack SSI SCHAEFER for 18 pallet places
Type probably L 500
Total shelf length approx. 5.6 metres
Shelf height: 3 meters or 2.5 meters
Shelf depth: 1050 mm
Shelf load: max. 1000 kg
Load capacity per pallet position: approx. 500 kg
Consisting of:
4 pieces stand frame grey lacquered (shelf stand) height 3000 mm
Bgqarpmqg0
or
4 pieces stand frame grey lacquered (shelf stand) height 2500 mm
Rectangular trapezoidal perforation in stand
Stand profile Width: 65 mm
Stand profile Sheet t... more
|
|
5
Internal/circular and surface grinding machine make SCHAUDT type UR 500
make # 114024, year of manufacture 1971
Technical data:
centre distance 500 mm
Centre height 250 mm
grinding wheel diameter 300 mm
Bhjc23lqo9
Operating voltage 380 V
Light voltage 220 V
Driving power of grinding support 5,5 kW
Drive power headstock 1,1 kW
Weight approx. 2000 kg
Outer dimensions approx. 2400 x 1500 x 1770 mm
with
- 4-jaw grinding chuck 250 mm
- fixed bezel
- Tool cabinet with contents
- several grinding wheel... more
|
|
5
used
Screw rings C-shape, screw force, steel construction force, barging, clamping tools
-Wingspan about 500 mm
-Span depth about 200 mm
-Mass 650/290/H40 mm
Kc2msylk
-Weight 5.7 kg more
|
|
x-travel 500 mm
Bev92scvq0
y-travel 400 mm
z-travel 450 mm
CNC-control HAAS
table-size 660 x 360 mm
max. table load 500 kg
spindle taper ISO 40
spindle turning speed range 50 - 5000 U/min
feed stepless 15.000 mm/min
rapid traverse 15 m/min
drive capacity - spindle motor 8,3 kW
tool change unit 21 Pos.
coolant
voltage 400 V
weight of the machine ca. 4,6 t
dimensions of the machine ca. 2,25 x 2,30 x 2,30 m
- serial-no.: 10250
- controlling: HAAS more
|
|
6
pressure 50,0 t
output 31 in 12 mm
square edge steel 30,0 mm
Bflqvcereb
round bar steel 32,0 mm
L-beam 100 x 10,0 mm
throat 200 mm
shear: flat material 150 x 15 mm
range L-W-H 0,98 x 0,6 x 1,7 m more
|
|
3
Data sheet of retrofit POS. GE 22.10
Gebhardt 7.5 + 0.9-610-500 belt conveyors
Type: Gebhardt 300.10 with aluminium \'skeleton\'
Year of manufacture: 2007
Ribbon length: 900 mm
Total length of main band: 7.449 mm (incl. upper bow piece + straight piece)
Upper bow piece length: 392 mm
Upper straight piece length: 3,830 mm
Total width: 610 mm
Belt width: 500 mm
Ribbon belt type: smooth
Main conveyor belt type: easy structured
Drive unit: Central drive with tensi... more
|
|
3
-Overtaken 2020
-TFT screen
-Hand wheel with axle selection
-16-way changeover contact
-Contact protection
-EROWA clamping system
Obkiefev
-Programmable tank tracking
-control TNC 223 B
-central lubrication more
|
|
x-travel:500 mm
y-travel:400 mm
z-travel:400 mm
turning speeds:8.000 1/min
taper ISO:SK 40
control:HAAS V 16 Power Mill
tool change unit:20 Pos.
spindle drive:10/16 kW
total power requirement:20 kW
Sprlu7y3
weight of the machine ca.:3,250 t
dimensions of the machine ca.:2.23 x 2,36 x 2,31 m
vertical machining center,
Coolant device,
Swarf conveyor
electronic handwheel,
internal cooling system ( ICS ) 21 bar,
programmable Coolant water nozzles,
counter reading: approx. 15.000h control on, app... more
|
|
5
used
|
|
5
Motor output 10 kW
automatic
Table dimensions 1300 x 1025 mm
Spindle diameter 50 mm
reus 6000 U/min
Weight 1000 kg
Dimensions (L/W/H) 1300 x 1100 x 2000 mm
Control
Haberkorn HF 500 milling machine for round windows
-----
Heavy lifting machine with infinitely adjustable milling spindle and
built-in special stops allow the sheet milling without
any tool change or set-up times. The big, stable
Worktable ensures optimal support at a working height
of 930 mm. The easy operation, as well as th... more
|
|
9
High-quality machine from a renowned manufacturer. Suitable for the production of individually defined air-filled protective and filling elements from PA and PE film. four air cushions are usually produced per working cycle. Different formats can be produced. There are 10 programs available for storing several parameters. By calling up the corresponding program in the display, air cushions from 4 cm to 16 cm in length and individually defined filling degree can be produced. The resulting air cus... more
|
|
2
Data sheet of retrofit POS. GE 12.05
Gebhardt 7.7 + 0.9-610-500 belt conveyors
Type: Gebhardt 300.10 with aluminium \'skeleton\'
Year of manufacture: 2007
Ribbon length: 900 mm
Total length of main band: 7,733 mm (incl. upper bow piece + straight piece)
Upper bow piece length: 375 mm
Upper straight piece length: 1,293 mm
Total width: 610 mm
Belt width: 500 mm
Ribbon belt type: smooth
Main conveyor belt type: easy structured
Drive unit: Central drive with tensi... more
|
|
15
INGERSOLL HANSEN - GANTRY 500 - 1997- SINK EDM- moves X/Y/Z=525/400/375 mm- table 730x630 mm- dimensions: L2450xW2100xH2600 mm- weight 4800 kg
Puatda more
|
|
15
Brand: Schaudt
Type: RFH 500
My year: 1967
machine no. 114732
centre height: 100 mm
centre distance: 500 mm
grinding wheel diameter: 300 mm
Main drive: 3 kw
Speeds: 30 - 750 rpm
Installation weight: 2000 kilo
Installation dimensions: 1500 X 1200 X 1800 mm
Accessories: With the illustrated documentation, as well as 12 different large grinding wheels and a machine lamp.
Itgp3o2 more
|
|
5
used
Hydraulic unit, hydraulic pump, hydraulic pump, hydraulic pump
-Engine 5.5 kW 1460 rpm
-max pressure ca. 500bar
Npdab
-max liter capacity ca. 7,4 l / min
-Various valves
-Price per piece
-Number of 3
-Dimensions 680/420 / H790 mm
-Weight 175 kg more
|
|
5
Equipments:
Mechanical speed max: 60 cycles/min
Foil width: 1.100 mm
Infeed width max: 500 mm
Nn92l
Shrink tunnel
Infeed height max: 150 mm more
|
|
3
measuring range X-axis 500 mm
Eeetdod
measuring range Y-axis 700 mm
Table dimensions 200 mm
tool diameter 100 mm more
|
|
2
Data sheet of retrofit POS. GE 11.85
Gebhardt 6.5 + 0.9-610-500 belt conveyors
Type: Gebhardt 300.10 with aluminium \'skeleton\'
Year of manufacture: 2007
Ribbon length: 900 mm
Total length of main band: 6.529 mm (incl. upper bow piece)
Upper bow piece length: 613 mm
Total width: 610 mm
Belt width: 500 mm
Ribbon belt type: smooth
Main conveyor belt type: easy structured
Drive unit: Central drive with tensioner
Drive: SEW-eurodrive gear motor
Conveyor speed:... more
|
|
10
x-travel 500 mm
y-travel 400 mm
z-travel 400 mm
Control HAAS V16 Powermill
table-size 660x360 mm
table load 1350 kg
tool taper ISO 40
turning speeds 10000 U/min
feed 8 m/min
J8rbyr
rapid traverse 15 m/min
tool change unit 20-fach
total power requirement 10 kVA
weight of the machine ca. 3,2 t
dimensions of the machine ca. 2,7x2,3x2,4 m more
|
|
3
Spindle cone: SK 40, rotational speed: 12,000/min, number of tool slots: 9, operational hours: ca. 20,000h, including 300 SK 40 and collet chucks.
3updj7zf more
|
|
5
used
Hydraulic unit, hydraulic pump, hydraulic pump, hydraulic pump
-Motor 3.0 kW 1410 rpm
-max pressure about 500 bar
Bfrcxiwbzr
-max liter capacity approx. 2.6 l / min
-Dimensions 500/260 / H555 mm
-Weight 64 kg more
|
|
3
1998
ready for operation (used)
Sofort ab Standort frei :
Mikron Haas CNC Vertical Machining Center
Type VCE 500 VFO
Mut32k
Baujahr 1998
Tisch 660 x 360 mm
Verfahrwege X / Y Z 500 / 400 / 450 mm
Tischbelastung 500 kg
Aufnahme SK 40
Spindeldrehzahlen 50 - 5000 U / min
Werkzeugwechsler 21 Stationen
Spindelmotor 8,3 kw
CNC Steuerung Haas
Kühlmitteleinrichtung
Späneförderer
Gewicht 4,6 to more
|
|
7
1968
good condition (used)
Capacity: 500t
Table size: 1800x1530mm
Distance between column: 2000mm
Max open height: 730mm
Stroke: 160mm
Cvtunv7iw
Stroke rate: 40/min
Hydraulic pressure:168 MPa
Power: 58kW
Size: 3500x2400x6150 over floor, under floor 650mm
Weight: 60t
The machine running till the last minute.
It have maintenanced continously. more
|
|
3
Gebhardt Belt conveyor system 6725-610-500 with pre-flow belt 900-610-500
RA1004
The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available.
Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece... more
|
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: The World's 10 biggest excavators
New Machineseeker.com TV commercial with Michael van Gerwen
Sell now on Machineseeker! Over 160,000 inquiries per month
Photo gallery: the 10 strongest forklift trucks in the world
Sponsorship of Michael van Gerwen and TV advertising
