Used Amada Em 2510 Nt for sale (227)

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Machine/vehicle number: 51020361, Coordinate punching press AMADA AC 2510 NT. Made in Japan. In perfect condition, not used very often. Everything works, complete set. B2Paba8Cbk

Year of construction: 2004, Condition: ready for operation (used), This AMADA EM2510NT Punching machine was manufactured in the year 2004. Bkipvhn7A92 Application Types Punching

Condition: used, Year of construction: 2004, Operating hours: 26,000 h, Functionality: fully functional, 2004 AMADA EM2510NT. The perforating machine is in good condition and has always been serviced on time by Amada service representatives. All documentation, service reports are included. Recently replaced bugno encoder. The machine is sold with software and tools. Perforating machine connected, available for testing, inspection. Specification: Year: 2004.07 Made in France. Operating time in hours: 26 426 Hours of power: 65 006 Software: Bslmfygggc Control unit: AMADA AMNC-F Perforating force: 20 tonnes Stations: 45 Tools: sold with tools Metal length: 2500 mm. Metal width: 1270 mm. Sheet thickness: 3,2 mm. Metal width change: 5000 mm. Workpiece weight: 150 kg. Dimensions: P 6080 x P 5120 x A2318 mm Weight: 16 500 kg Location. Available for testing: Yes If you have any further questions, we will be happy to answer them.

Year of construction: 2011, Operating hours: 14,272 h, Condition: excellent (used), Punching machine AMADA EM2510NT was manufactured in 2011 in France in the factory AMADA. In 2012 started used in Spain. In 2020 started used in Lithuania. And for now is for sale with 14 272 operating hours. This machine can be operate with a punching force of 200 kN. The Punching machine still is in good condition and serviced on time by Amada support company. Included full documentation of inspections. The turret punch is in exelent condition. The machine comes with the software. The Punching machine is still connected and it is possible to test anytime in Vilnius, Lithuania. Please see all photos and video. Specification: Year: 2011 Made in: France Operating time in hours: 14 272 Power on hours: 29 580 3U2U38Ivye Software: icluded Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: No tools Metal length: 2 500 mm. Metal width: 1270 mm. Sheet thickness: 3.2 mm. Metal width repositioning: 5 000 mm. Weight of the workpiece: 150 kg. Dimmensions: L 6080 x W 5120 x H2318 mm Weight: 16 500 kg Location: Vilnius, Lithuania Possible to test: Yes Any questions welcome.

Condition: excellent (used), Year of construction: 2014, Operating hours: 7,998 h, Machine/vehicle number: 43610191, Sheet thickness aluminum (max.): 6 mm, We are offering an Amada EML 3610NT punch laser combination machine for sale. The offered machine is used and in a very good condition. Main features of the machine (overall): - Possibility of combining punching and laser burning - automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and exchange of pallets during the operation of the machine - automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of sheet loading during machine operation - automatic bale delivery 1500x400mm (two conveyor belts for details) - turning station with 41 fixed and 4 rotating stations - 3 manually adjustable paws - cutting elements on length 3020x1500 - Laser cutting length 2000x1500 - max. sheet thickness 6mm (due to brush table) - thread function - pneumatic hold-down device Accessories for the machine: - Light barrier - Thread cutting set - Sensor for bale chute - System for chip extraction - Separate lubrication of punching and threading tools - Bending sensors for sheet metal - A conveyor belt that pulls out the punching waste Machine data as of 17.09.2024 - Time of the running machine: 7998 hours - Operating time: 2972 hours - Cutting time: 1196 hours - Working time of the resonator: 6154 hours AMADA EML3610NT - Max. Cutting force: 300 kN - Power (laser efficiency): 4kW (CO2) - Type: EML-NT - No. 43610191 - Model:EML3610NT - Year of manufacture: 2014 November - Total value of the connection to the network: 400V/68.3 kVA - Connected load: 85 kVA - Compressed air connection: 8 bar; 48 m3/h - Width of the guarded area: 30m (max) - Minimum safety distance: 1.36 m - Response time of the machine + total response time of the firewall: 320ms - Stop time: 300 ms - Machine braking distance: 180mm - Weight of the punching/laser machine: 24,000 kg PRIII (reception of finished parts) - Model: PR III 300 L 2P - No.: 2424 - Year of construction: 2013 - Connection to the network: 400/50V/Hz - Max. Power supply: 8.5 kW Ui3Jnjkmg7 - Compressed air connection: 6 bar 1000 l/min. - Dimensions and weight of the elements to be collected: Workpiece thickness from 0.5 to 3mm Min.150x150mm max. 2500x1000mm with a weight of no more than 45kg - Machine weight (PRIII): 4600 kg ASIII MP (sheet feeder) - Model: ASIII MP 300 - No.: 2994 - Year of construction: 2015 - Connection to the network: 400/50V/Hz - Max. Power supply: 12kW - Compressed air connection: 6 bar 1000 l/min. - Size of sheets that can be stored: Max. 3000x1500mm Minimum steel thickness 1000x300mm from 0.5 to 8mm Weight of a single sheet no more than 300kg - Machine weight (PRIII): 12 000 kg The price is for the entire machine only. The price does not include Tools, dismantling, transportation and commissioning If you have any further questions, please do not hesitate to contact us. The machine is offered in different sources. If you are interested, please confirm availability.

Condition: excellent (used), Year of construction: 2011, Operating hours: 68,000 h, Functionality: fully functional, Overall weight: 13,000 kg, Punching force: 20 t, Sheet thickness steel (max.): 3 mm, Equipment: Type Plate Available, Production date: March 2011 Hours of operation: 68000 Current condition: very good, used in production For the past 3 years, it has worked on average 1 shift on sheets from 0.5mm to 2mm Tonnage: 20 metric Press controller system: servo-driven (not hydraulic) Maximum thickness: 3.2mm or 6mm with dense brush or ball table Travel range (without repositioning): 1270 mm x 2500 mm Maximum feed speed: - X axis: 80 m per min - Y axis: 60 m per min Maximum material weight: - 50 kg (F1 speed) - 150 kg (speed F4) Maximum number of strokes: 900 strokes per minute Punching accuracy: ± 0.1 mm Turret rotation speed: 30 rpm Automatic indexing speed: 60 rpm Turret stations: 45 stations (including 4 auto-index) NC control: AMNC / PC Power requirement: 19 kVA Maximum air consumption: 750 Nl Machine weight: 13 tons Included: - Amada AE2510NT punching machine - Isolation transformer and surge protector - Tool set (housings, punches and dies) Included with machine: Hu3Smns *Decommissioning and loading on the truck or container. *Full turret of used good quality tooling plus extra tooling (value 30 000 euro). *Prima Power tool grinder year 2011 (value 3 000 euro). *Italian ISphera Nesting software with license (value 5 000 euro).

Condition: excellent (used), Year of construction: 2014, Operating hours: 15,953 h, Functionality: fully functional, Machine/vehicle number: EMZ3510057, Equipment: Safety Light Barrier, Punching force: 300 kN CNC control: AMNC Connected load: 27 kVA Noise level: 91 dB (A) Sheet length: 2500 mm Sheet width: 270 mm Maximum thickness of standard steel: 4.5 mm Max. Punching diameter 114.3 mm Dphwl7 Stroke rate (rpm) 1000 Max. Sheet weight 150 kg Tool stations: 45 turret stations (4 of which can be rotated) ----- Length x width x height 4877.0 × 3227.0 × 2317.0 Weight 17500 kg Various tools are also for sale!

Condition: excellent (used), New Delem control DAC 310 control on our Amada 3metre guillotine / sheet metal cutting machine For Sale. Amada 3metre x 6mm sheet Model: M – 3060 With magnetic sheet support Thickness: 6mm Mtqm0Otjb2 New Delem control Metal shear for sale, complete with a new Delem control and new rear safety guards

Condition: good (used), Year of construction: 2000, Press ready to work. Fanuc Series 18-P Control. Max Force 196kN, 31 Turret Station, Tricool S2 / 35 AMS / B Chiller, Light Guards with Qty of Punching Tools (19 x A, 6 x B, 1 x C, 2 x D ), Auto Indexing - 2 x B, 1 x C. Currently connected to the power- possible to test it. World wide delivery possible. Dpr3Qz

Condition: ready for operation (used), Year of construction: 2008, Operating hours: 15,707 h, Functionality: fully functional, Laser power: 4,000 W, Sheet thickness (max.): 12 mm, Travel distance X-axis: 2,520 mm, Travel distance Y-axis: 1,550 mm, Travel distance Z-axis: 300 mm, TECHNICAL DETAILS Laser power: 4,000 W X-axis travel: 2,520 mm Y-axis travel: 1,550 mm Z-axis travel: 300 mm Max. Sheet thickness: approx. 12 mm Table load: 330 kg MACHINE DETAILS Total operating hours: 39,777 h Operating hours: 15,707 h Cutting time: 8,326 h Machine weight: approx. 7,700 kg Ul8Pwkqafj EQUIPMENT - AF400i-D control system - cooler - Extraction unit - transformer - Light barrier

Condition: excellent (used), Year of construction: 2004, Automatic bending/folding cell - press brake with bending robot The machine was purchased from AMADA in 2010 as a reconditioned machine and has only a few operating hours Manufacturer: AMADA Model: ASTRO 100 NT Year of manufacture: 2004 (purchased from AMADA in 2010 as a reconditioned machine) Control system: AMNC II PC Machine number: 20300050 TECHNICAL DATA: Pressing force: 100 tons Bending length: 3000 mm Tool clamping: AMADA, standard Clearance between uprights: 2700 mm Projection: 415 mm Stroke: 200 mm Installation height: 500 mm Adjustment range backgauge: 600 mm Width of the work table: 60 mm Folding robot: Payload: 20 kg incl. gripper Max. Part size: 1000 x 800 x 2.3 mm (as profile 1800 x 300 x 2.3 mm) Length of linear axis: 3080 mm Max. Material thickness: 0.6 - 2.5 mm Blbkemijiko Loading and unloading robot: Max. Capacity: 20 kg incl. gripper Number of controlled axes: 6 Raw material stacking height: 500 mm EQUIPMENT and ACCESSORIES: Press brake HDS-1030 Stop sensor system for robot operation ASTRO 100 folding robot Linear axis 3000 mm Loading table with spreading magnets Gripping device ASTRO-MP20 loading and unloading robot Quick-change system for gripper PFB 90 conveyor belt (length: 600 mm, width: 800 mm) ASTRO 100 II Set 1 ASTRO 100 Set 5 ASTRO 100 II Set 3 Gripper package Comprehensive tool package PC with software Safety fence NOTE: The machine has a small defect that sometimes occurs during operation. According to AMADA, a cable and/or a servo motor must be replaced here, then the machine will work properly again. The costs for the repair are EUR 9,293.40 net (offer from AMADA enclosed). Subject to prior sale. Sale under exclusion of any guarantees and within the scope of our general terms and conditions. All information without guarantee.

Condition: ready for operation (used), Year of construction: 2009, 5260.390 ➣ 1 Amada HDS 1030 NT press brake, year 02/2009, press force 1000 KN with Amada control system Hu3Ng90 To be auctioned in our insolvency auction on September 25, 2024 at 2 p.m. Please go via Clickout Viewing on September 19, 2024 from 10 a.m. to 2 p.m. in 51709 Marienheide

Condition: used, Year of construction: 1998, Machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Hozu8Dau Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2008, CNC laser cutting machine Amada LC3015 X1 NT 4KW, with 2 exchangeable tables The AMADA laser has been thoroughly tested by an AMADA service technician, is energized and ready for use. Year of manufacture: 2008 Type: Amada LC3015 X1 NT Celmn2Ivjb Laser power: 4kW Table: 3,000 x 1,500 mm Cooler Ridel Extraction Donaldson

Condition: used, Year of construction: 2008, Bending length 3110 mm Max. pressure 130 ton Max. stroke 3530 mm Ciwcvmtwqe Max. daylight 620 mm Controlled on 8 axis: (X1-X2-Y1-Y2-Z1-Z2-R1 & R2) Control: AMNC Equipped with: Lots of tooling

Year of construction: 2011, Condition: ready for operation (used), General Data Machine weight 18000 kg Clamping Unit Clamping force 2200 kN Opening stroke Max. 350 mm This AMADA HFP NT 220-4L press was manufactured in 2011. It features a maximum press force of 2200 kN and a stroke up to 350 mm, weighing 18000 kg. A robust choice for heavy-duty operations, the AMADA HFP NT 220-4L machine we have for sale is ideal for your pressing needs. Contact us for more information. Dphn9Z Application Types Bending

Condition: reconditioned (used), Year of construction: 2007, Amada LC-3015 X1 NT - Deflection type (X/Y axis): Flying optics - Travel (X): 3100 mm - Travel (Y): 1550mm - Vertical movement (Z): 120 mm - Cutting speed: 0-30 m/min - Travel speeds: (X and Y axis) 85 m/min, (Z axis) 25 m/min - Position Tolerance: (X/Y axis): 0.005mm/500mm, (Z axis): 0.1mm/100mm - Maximum workpiece dimensions: (L x W x H) 3150 x 1525 x 19 mm - Maximum weight allowance: 690 kg Cbgaiejg9M - Maximum steel thickness: 20 mm - Maximum thickness of stainless steel: 15 mm (oxygen cut),12 mm (clean cut) - Maximum aluminum thickness: 12 mm - Number of pallets (pallet changer): 2 pcs. - Pallet change time: approx. 25 seconds - Dimensions of the laser cutting machine: (L x W x H) 6670 x 3260 x 2100 mm - Dimensions pallet changer: (L x W x H) 3430 x 2310 x 850 mm - Laser cutting machine weight: 9900 kg - Pallet changer weight: 1800 kg - Power supply: (machine + resonator) 71 KVA - Controller: LC20BP2 laser resonator - Manufacturer: MITSUBISHI - Model: ML40CFX - Nominal power: 4 kW - Stability: +/- 1% - Maximum power: 5 kW - Frequency range: 10 - 3000 Hz - Laser type: C02 laser - Operating hours: discharge 23,000h - Total mirror revision recently done

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, Used hydraulic press brake Brand: AMADA Model: HD 1003 NT Serial No.: L100004 Year: 2011 Weight: 6500kg Oil tank: 48Ltrs. Folder with 8 axes (Y1, Y2, X, R, Z1, Z2, XS1, XS2) Force: 100Tn Folding length: 3110mm Distance between uprights: 2700mm Neckline: 420mm Cursa: 200mm Aperture: 470mm Fast downhill speed: 120mm/s Bns3Hifgbec Speed up/recovery: 120mm/s Folding speed: 10mm/s Promecam mooring with double inner and outer grip. AMADA CNC: AMNC-PC Ver. 5.1. Sick front safety barrier. Includes: - DIGIPRO angle corrector - Complete machine, cnc and Digipro manual.

Condition: excellent (used), Year of construction: 2011, Power: 4 kW (5.44 HP), MODEL USED AMADA LC 3015 FI NT 4 KW CNC LASER CUTTING MACHINE WITH LST3015 F1 TWIN SHUTTLE TABLE and TOWER SYSTEM FOR SHEET LOAD AND UNLOAD CAPACITY FOR SALE description AMADA LASER MODEL LC3015 F1 4KW AF 4000i-B CONTROL AMNC-PC MAX LASER OUTPUT 4000 / 4KW Year 2008 MAX SIMULTANEOUS FEEDRATE M/PER/MIN (X/Y 170M/MIN MAX SHEET SIZE Bg9Jrmtbman 3070 X 1550 X 100 (Z AXIS) MAX MATERIAL THICKNESS 20 mm M.S. MAX MATERIAL THICKNESS 12 mm MAX MATERIAL THICKNESS ( ALUMINIUM A5052) 10 mm

Condition: good (used), Year of construction: 2010, Amada press brake in very good condition. Can be inspected under power. IMMEDIATELY AVAILABLE! Bending force 2200 kN/ 220T Bkv92L7Uxap Working length 4280 mm Press beam length 4280 mm Passage between uprights 3760 mm Distance 420 mm Press beam heading 200 mm Minimum increment value 0.01 mm Working speed 10 mm/s Press beam width 180 mm Work table height 960 mm Power 20 kW Machine power supply 400 V Installation height (distance between press beam and top beam) 470 mm Control Touch screen control AMNC-PC Backgauge 5 axles type “B.BL” Angle measuring system infrared DIGIPRO Machine dimensions: Length: 5480mm Depth: 3000 mm Height: 3100mm Weight: 17250 kg

Year of construction: 2007, Condition: used, Complete set for sale. AMADA laser cutting machine in good condition, one owner, always serviced by AMADA service representatives on time. All documentation, service reports are included. The laser cutting machine is connected and can be inspected, tested in Vilnius, Lithuania. Specification: Model: AMADA LASMAC LC2415 A4 NT Year of manufacture: 2007 Made: in Japan Power: 4kW Working area (X x Y): 1500 x 3000 Weight: 7.7T Operating hours: 40,786 Jvsvndym Place: Vilnius, Lithuania Testable: Yes If you have more questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2000, General Data Measurements width 5330 MM Measurements depth 5125 MM Measurements height 2160 MM Machine weight 11000 KG Gvrta0Dw9 Control Unit Brand FANUC Model SERIES 18-P Main Drive Punching force 196 KN Movement X-Axis Movement 2500 MM Y-Axis Movement 1270 MM Tools Number of index 2 Media Main electronic connection 400V Power consumption 24 KVA Chip conveyor Yes Internal cooling Yes This AMADA VIPROS 2510 KING Punching Machine was manufactured in Japan in the year 2000. This machine operates through a FANUC SERIES 18-P Control unit. It can work with a punching force of 196 kN. Application Types Punching

Condition: good (used), Year of construction: 2010, Operating hours: 15,756 h, Overall weight: 6,750 kg, Input voltage: 400 V, 1000 KN Max. Stroke: 200 Weight: 6750 Noise level: 74 dB Year of construction: 07/2010 Voltage: 400 V / 50Hz Rated current: 15.2 A Current operating hours: 15,756 hours with manual angle measurement and correction system with safety laser UVV inspection at regular intervals / maintenance always by Amada at regular intervals Accessories: Die tool: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB base for double V die 20.287 + 60.919 835mm Bending weight: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Ccbu8Xs Other: Light barrier in need of repair (new price approx. 4500 €) - separately as replacement Sale only to commercial customers and under exclusion of any warranty!

Condition: good (used), Year of construction: 1997, Model ... Vipros 20-50-50 Frame Construction ... Bridge Type Press Capacity ... 20 Tonnes (196kN) Press Type ... Servo Controlled Hydraulic Ram Axis Traverse Distance ... 1270 mm x 1270 mm Workable Max. Sheet Size . 1270 mm x 2540 mm (with auto repositioning) Maximum Material Thickness ... 6.35 mm Mild Steel Max. Material Weight ... 105 Kg Max. Material Weight (Max Speed) ... 62 Kg Max. Hole Dia. ... 88.9 mm Number Of Stations ... 31 Stations: 19 x 12.7 mm 6 x 31.7 mm 1 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 1 x 50.8 mm Axis Speed ... 82 m/min Hits Per Minute (2mm Pitch) ... 1000 H.P.M./2.5mm Stroke (25.4mm Pitch) ... 340 H.P.M./8mm Stroke Turret Speed Bi-Directional ... 35 R.P.M. Punching Accuracy ... ± 0.07 mm Punching Accuracy (High Accuracy Mode) ... ± 0.05 mm Repeatability ... ± 0.015 mm Ram Stroke Length (Maximum) ... 40 mm Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 22 kVA 400V +/- 10% 50 Hz Air Pressure Required ... 5.0 kgf/cm² Air Flow ... 250 1/min Machine Length ... 5030 mm Machine Width ... 2630 mm Machine Height ... 2160 mm Csiaw9G2 Machine Weight ... 9200 kg NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 Axis Simultaneous + PHNC Tape Code ... EIA or ISO (Automatic Recognition) Programming Mode ... Absolute/incremental Min. Input ... 0.01 mm (0.01°) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 Digit T Function ... T - 3 Digit M Function ... M - 3 Digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb No. Of Programs ... 200 Machine Operation ... Memory Interface ... RS 232 C

Year of construction: 2004, Condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM Dmapct X-AXIS TRAVEL: 3420 mm Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 200 mm RAPID FEEDS X-Y-Z: 80 - 80 - 60 m/min MAX CUTTING THICKNESS: STEEL 22mm; INOX 12mm; ALUMINIUM 9 mm WORKING AREA: 3070 x 1550 x 200 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: FANUC C4000 E ; 4000 W CONTROL UNIT: FANUC 160 iLB WEIGHT: 15500 Kg NOTE: DOUBLE STORAGE TOWER LKI UL300FO TWIN year 2004; SUCTION AND FILTERING UNIT TORIT; COOLING UNIT MTA 201