Used Amada Em 2510 Nt for sale (222)

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. Hsdpfx Afjw Iq Ugjwenk - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: HFE 220-3 N080201, functionality: fully functional, operating hours: 24,330 h, power: 20 kW (27.19 HP), input voltage: 400 V, bending force (max.): 2,200 t, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, lower tooling, safety light barrier, upper tooling, Ideal for metal production. Properly maintained, ready for use! Details and viewing by phone. Hnedpfjyqvatox Afwok

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, AMADA CNC Laser Cutting Machine Type: ALPHA Laser LC 2415 III Year of manufacture: 2001 Laser power: 3000W CNC control: Fanuc Series 160i-L Table length: 5040 mm Table width: 1550 mm Sheet thickness up to 12 mm Table load up to 330 kg Travel path X: 2520 mm Travel path Z: 300 mm Travel path Y: 1550 mm Hnsdjxv Skdepfx Afwok Cutting speed: 20 m/min Rapid traverse speed X/Y/Z: 80/80/60 m/min Positioning accuracy ±0.01 mm/500 mm Repeatability ±0.005 mm Compressed air: 6/20 bar Drive: 10 kW Weight: 6.6 t Complete accessory set

Condition: used, Clamping device for table band saw, wood band saw, firewood saw, automatic band saw, material positioning, saw band rollers, saw band roller -Saw band roll: made from metal saw Amada HA-400 W Hnsdpfx Afjgal Avowek -Diameter: 595mm -Shaft: Ø 50 x 70 mm -Receptacle: M16 x 2 -Dimensions: Ø 595 x 193 mm -Quantity: 1 piece available -Weight: 51kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm Hnedpfxogag Ahs Afwjk -Stroke: 585 mm -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg

Condition: excellent (used), Technical data: Working length: 4100 mm Frame width: 3650 mm Pressing force: 220 tons Hjdpfx Aeykkrkefwenk CNC control: OPERATOR OPII graphic Color display size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motorized adjustable backgauge Throat depth: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: AMADA tools (new) The seller is not liable for typographical or data transmission errors. The machine is in a condition regarding appearance, technology, and wear appropriate to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel Hnsdpfx Afsxaa N Newok - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397088

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools Hjdpfsxabnyox Afwjnk - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3100 mm Frame width: 2760 mm Press force: 170 t CNC control: OPERATOR Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge Throat depth: 410 mm Stroke: 200 mm Working height: 960 mm Motor power: 16.5 kW Hnsdpfx Asyi Updsfwjk CE mark Dimensions (Length x Width x Height): approx. 3500 x 2200 x 2900 mm Weight: approx. 11 tons Accessories: 1 pc. new upper tool 1 pc. new 4-sided die The seller is not liable for any typographical or data transmission errors. The machine is provided in a condition appropriate to its age for appearance, technology, and wear; used machines are sold without any guarantee or warranty.

Condition: excellent (used), Year of construction: 2003, Technical specifications: Working length: 4230 mm Distance between uprights: 3650 mm Pressing force: 170 t CNC control: AMADA Operator III graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Hsdjyi Ud Uopfx Afwjnk motorized adjustable backgauge Stroke: 400 mm automatic crowning Working height: 960 mm Motor power: 16.5 kW CE marking Dimensions (length x width x height): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tons Accessories: automatic measurement of the workpiece bending angle with automatic correction in the control system lateral movable safety fences LAN network operation infrared light curtain at the front and rear Condition: Very good condition, only 9,000 operating hours The seller is not liable for typographical or data transmission errors. The machine is sold in accordance with its age, using, technical condition and wear; used machines are sold without any guarantee or warranty.

Condition: used, CNC punching machine AMADA ARIES 245 with CNC control AMADAN 04PA Punching capacity: 20 t Hsdpfx Asx Rp Uxefwonk Machine weight: 7,500 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,650 h, control type: CNC control, laser hours: 8,650 h, laser power: 2,000 W, AMADA CNC Fiber Laser LCG-3015 AJ 2 kW Fiber Skid table Customs tariff no.: 84561000 / Japan / no preferential origin AMNC Multi Media controller 2000 Watt laser power AJ Fiber Laser Principle: flying optic 3 axes direct drive (X/Y/Z), oil shot function Including sensor cutting head Including lens quick change system Including nozzle quick change system Including cutting lenses: 150, 190, 190 AX mm Including NC-gas control Including NC-focus control Including clean cut, high pressure cutting Hnedsycf N Ijpfx Afwsk Including aluminum cut function Including air purge system Including CE-compliant safety features Including Software 5A-BLANKSOLPACK Including Shuttle Table PCLCG3015 Year of manufacture: 04/2014

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 50,000 h, control type: CNC control, actuation type: electric, controller manufacturer: Fanuc, laser type: CO₂ laser, laser hours: 50,000 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, table length: 5,040 mm, table width: 1,550 mm, working length: 2,520 mm, working width: 1,500 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 60 m/min, workpiece weight (max.): 330 kg, type of cooling: water, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, Amada CO2 laser. Purchased in 2006. Operated intensively until 2017. In 2017, we acquired a fiber laser, and since then this unit has been used only occasionally for specialised tasks. The laser is fully operational but requires an inspection of certain components. X-axis is virtually unlimited after repositioning; Y-axis – 1500 mm. The laser is housed in a heated hall and has not been exposed to weather conditions. If purchased, we can assist with arranging loading onto transport. Hnjdpfxsyly Hmo Afwsk

Condition: excellent (used), Year of construction: 2008, Technical Data: Laser type: CO2 Travel: X-axis: 1260 mm Y-axis: 1260 mm Z-axis: 100 mm Max. workpiece dimensions: 1250 x 1250 mm Hsdeyigrzopfx Afwenk Max. workpiece weight: 160 kg Laser power: 2 kW Cutting capacity (steel): 12 mm Control: FANUC 16 iL Resonator: FANUC AF 2000 Compressed air requirement: 20 m³/h Electrical connection: 400 V / 50 Hz Connected load: 70 kVA Dimensions (L x W x H): approx. 3200 x 2200 x 2100 mm Weight: approx. 4.2 t Special equipment: HS-2003 sensor cutting head High-pressure cutting device: Clean Cut Aluminum cutting device: Alu Cut Exhaust system Cooling unit The seller accepts no liability for typing or data transmission errors. The machine's visual and technical condition, as well as wear, correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1998, AMADA - HFBO 125-4 - 1998 - 8 controlled axis - 125 t - table 4000 mm Hsdpeyl Svmsfx Afwenk - crowning - including many tools - hours 44410

Condition: good (used), Year of construction: 2009, functionality: fully functional, 1 used automatic band saw Brand Amada Type HA 250 W Year of manufacture: 2009 Technical specifications: Cutting capacity: Round: 250 mm Square: 250 x 300 mm Max. bundle cut: 200 x 150 mm Saw blade dimensions: 34 x 1.1 x 3505 mm Blade speed, continuously variable: 24 - 90 m/min Table load: 1400 kg Working height: 700 mm Max. feed length per stroke: 370 mm Saw blade motor: 3.7 kW Hydraulics: 0.75 kW Coolant pump: 0.18 kW Hnedpfxsv T Tglo Afwsk Hydraulic oil tank: 98 l Cutting fluid tank: 180 l Approx. weight: 1500 kg Features: - Automatic material feed - Coolant system - Emergency stop button

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Hnjdpfxov Ip R As Afwjk

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Hnjdpfxsxfknao Afwok

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Hnjdowm Nn Rjpfx Afwsk

Condition: excellent (used), Year of construction: 2019, We are selling a PCB spot welding system from AMADA, mounted on a workbench. The welding head is type FD 120-A/So, year of manufacture 2019. Hodpfx Aoyhwdujfwonk

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Training school display unit VERY VERY seldom use For demo only, like new 1) Amada TP45FX Hedpfx Ajyunphofwsnk 2) PATEC 110ton press with recoiler

Condition: good (used), functionality: fully functional, We are selling a used Amada CTB 400 (carbide-capable bandsaw) with 3m powered roller conveyor and 6m outfeed roller conveyor. Technical specifications: - Cutting capacity round: 430 mm - Cutting capacity square: 430 x 430 mm - Cut-off length: 5 - 9999 mm - Bandsaw motor power: 7.5 kW - Total power: approx. 10 kW - Saw blade dimension: 4715 x 41 x 1.3 mm (suitable for carbide) - Variable blade speed: 15 - 150 m/min - Feed length: 10 - 9999 mm - Minimum remnant length: 15 mm - Dimensions (W x D x H): 2630 x 2740 x 2422 mm - Weight: approx. 4500 kg Hnjdpfjwybkdjx Afwok CNC control: Speed / Power Material / Cross-section Parallelism display Automatic parameter correction

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Type: ITS 80-25 Year of manufacture: 1994 Pressing force: 80t Bending length: 2500mm Throughput: 400mm Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Weight: 4950kg Hnjdpevncifofx Afwek

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder Hnsdexvitvepfx Afwek manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, cutting height (max.): 300 mm, overall weight: 1,300 kg, saw band length: 3,660 mm, table length: 400 mm, in excellent condition Horizontal band saw machine AMADA CRH-300S Hnjdpfx Afowvvr Ijwsk manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Speed ​​27 - 95 m/min, infinitely adjustable Bimetal saw blade: 27 x 0.95 x 3660 mm single-sided receiving table: 0 - 400 mm Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m