Used Amada Europe 258 for sale (217)

Condition: used, Year of construction: 2021, operating hours: 563 h, functionality: fully functional, machine/vehicle number: 258, punching force: 20 t, total height: 2,200 mm, total width: 3,200 mm, total length: 4,890 mm, sheet thickness (max.): 6 mm, type of input current: three-phase, workpiece weight (max.): 100 kg, overall weight: 11,500 kg, input current: 48 A, input frequency: 50 Hz, compressed air connection: 6 bar, feed rate X-axis: 82 m/min, feed rate Y-axis: 82 m/min, feed length X-axis: 2,000 mm, feed length Y-axis: 1,270 mm, input voltage: 400 V, positioning accuracy: 0.07 mm, pressing force: 20 t, Equipment: safety light barrier, Description TECHNICAL DETAILS Oil capacity: 160 l Hfolhcozc Dvmjcqrjh Turret speed: 25 rpm Travel ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 flipping: No flipping capability Processing The machine is equipped with brush strips and ball-bearing elements in the table, so both processing methods can be used directly. Max. sheet metal thickness over the ball-bearing elements: 6 mm Max. sheet metal thickness over the brush strips: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed rate 25.4 mm: X320 / Y250 Working cycle nibbling, feed rate 1 mm: X920 / Y920 Tools Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" Note: No tools included.

Condition: good (used), Year of construction: 2002, functionality: fully functional, punching force: 20 t, TECHNICAL DETAILS Machine capacity: 200 kN (20 t) Air pressure: 5 bar Air flow rate: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travelling ranges: Machine travel range without repositioning: 1,250 mm x 2,100 mm Hfelhccey Symueqroh Processing Max. sheet thickness with ball bearing table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling cycle, feed 1 mm: X920 / Y920 Tools Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Hslhccqjyn Nyberofh Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Excellent condition Hslhccozc Rucsqrefh No heavy use

Condition: used, Amada Europe 245 CNC Turret Punch. S/No. 245013 (1999), with GE Fanuc Series 18i-P Control, Max Force 200KN, Max Stroke 1290mm, Light Guards, Qty of Assorted Power Tooling. Country of Origin: France Offers considered prior to auction This lot is part of Auction 3470U - Ending Wednesday 24th June 2026 at 3pm (UK Time) Hjlhccqozcn E Eorofh

Condition: used, Year of construction: 2002, functionality: fully functional, stroke length: 2,600 mm, overall weight: 12,000 kg, punching force: 20 t, Amada Europe 2510 machine, in perfect working condition. Sheet metal working dimensions: 3500 mm x 1500 mm, with thicknesses up to 5 mm. Equipped with a fully operational automatic loading system. Hfjlhjywwztsccqreh

Condition: excellent (used), Year of construction: 2010, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstroke CNC Press brake Year 2010 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Hfolhceu A Dgrocqrsh Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 2006, functionality: fully functional, power: 6 kW (8.16 HP), stroke length: 200 mm, Hydraulic press brake Manufacturer: AMADA, Type: HFP 50-20 Year of manufacture: 2006 Technical data Manufacturer: AMADA Type: HFP 50-20 Year of manufacture: 2006 Working length: 2090 mm Capacity: 50 t Distance between uprights: 1,665 mm Stroke: 200 mm Throat depth: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: 4.7 t Equipment Helhccqjzdtrxersfh • Controlled axes: X, R, Z1, Z2 • FIESSLER light curtain at the front • Amada upper tool clamping system • CNC control 3D AMNC graphics • Rear safety device (swiveling grid doors) • Swiveling control panel – front left • Technical documentation All information is subject to change without notice. A live demonstration is possible at any time in our showroom.

Year of construction: 2021, condition: ready for operation (used), total width: 1,200 mm, total height: 2,300 mm, product length (max.): 1,200 mm, Automation system manufactured in 2021. This AMADA Jupiter System features a PLC controlled micro resistance welding technology with a workspace of 624 × 550 mm and a maximum welding area of 540 × 450 mm. It includes advanced capabilities such as welding automation, vision inspection, and data connectivity. If you are looking to get high-quality battery pack welding capabilities, consider the AMADA Jupiter System we have for sale. Contact us for further details. 40x units of Jupiter systems available (considered as a whole): welding automation includes the XYZ portal control system, welding control, welding monitoring, vision system, and data connectivity. Cooling units are not included. AMADA Jupiter Advanced Battery Pack Welder (2021) General • Model: Jupiter Advanced Battery Pack Welder • Condition: Very Good / Well Maintained • Machine Dimensions: 1,200 × 1,200 × 2,300 mm • PLC Controlled System • ISQ / MNC Welding ControllerMachine Type • Automated Micro Resistance Welding System • Battery Pack / Battery Module Welding SystemWelding Technology • Micro Resistance Welding • Frequency: 10 kHzWorking Area • Workspace: 624 × 550 mm • Welding Area (max.): 540 × 450 mm • Vision Area (max.): 540 × 450 mmPerformance • Welding Cycle Time: 1.8 sec (weld point to weld point) • Vision Inspection Time: 1.2 sec (vision point to vision point) • Operating Hours: range of 5,000–40,000 hElectrical Data • Power Supply: 400 VAC • Main Fuse: 40 A • Power Consumption: 2 kVAPneumatics • Compressed Air Requirement: 6 bar clean dry air Optional Equipment • Robot Loading System • Vision System • SQL Database Traceability • Electrode Holders • Spare Electrodes Optional Robot Loading System General • Application: Automatic Loading / Unloading of Battery Packs • Integration: AMADA Jupiter Welding System • Robot Loading Machine 25Equipment • Automatic Part Handling • Integrated Vision Inspection • Integrated Welding Process Optional: 3x ASIC Robotics Steckautomat V (2022), price on request General • Manufacturer: ASIC Robotics AGApplication • Automatic insertion / assembly of battery cells • Suitable for 18650 cells • Suitable for 21700 cellsCompatible Cell Holder Types • Senec V2 Hfslezdrazohccqreh • StreetScooter V6 • Ocado • LightyearPerformance • 1 × 4 cells simultaneously: approx. 1.0 sec/cell • 2 × 2 cells simultaneously: approx. 1.0 sec/cell • 4 × 1 cell: approx. 1.3 sec/cell • Technical efficiency: 95%Electrical Data • Voltage: 3 × 400 / 230 VAC • Frequency: 50 Hz • Fuse Protection: 25 A • Supply Cable: 6 mm²Pneumatics • Operating Pressure: 6–10 bar • Air Connection: Ø14 plug connection • Air Quality: Dry and oil-freeDimensions • Machine Height incl. Signal Tower: 2,720 mmWeight • Approx. 2,100 kgEnvironmental Conditions • Ambient Temperature: +5 °C to +40 °C • Relative Humidity: 45–85% non-condensingNoise Emission • Average Noise Level: 75 dB(A)

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, number of axes: 2, This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Press force: 300 kN • Travel distance with repositioning (X/Y): 5000 mm / 1525 mm • Max. material thickness: 4.5 mm • Travel speed (X/Y): 100 m/min / 80 m/min • Axis speed: 128 m/min • Positioning accuracy: ±0.1 mm • Turret stations: 45 • Auto-index stations: 2x B / 2x C • Overhauled two years ago, and serviced by Amada every year • Turret speed: 30 rpm Holhccqjx Enlxjrofh • Stroke rate: 1000 strokes/minmachine is not under power anymoreOPTIONAL: Tools and high-quality spare parts, see photos (original price €80,000)

Condition: used, cutting diameter / mm saw band length 8800 mm Hfelhccozcgkmsqrjh cutting width / mm total power requirement / kW weight of the machine ca. / t required space / m

Condition: used, Year of construction: 2005, Max. pressing force 80 t Max. length 2500 mm Stroke 200 mm Hjlhccqszdf D Uerofh Machine weight 5750 kg

Condition: refurbished (used), Year of construction: 2008, Used AMADA press brake: Helhjzbg Sbsccqrsfh Illustrative image, machine in stock but not yet prepared. It will be in the same condition once it has been refurbished. Year: 2008 Type: HFE400-4L Capacity: 4000 x 400T Number of axes: 6 Stroke of cylinders: 350 mm Rapid traverse speed: 100 mm/sec Installation of new, high-tonnage tooling along the entire length Machine completely refurbished upon order.

Condition: good (used), Matrices, 100 mm x 2 Hfjlozaitrjhccqreh Offset punches x 2 In good condition

Condition: good (used), Rear back gauge fingers for Promecam press brakes, adjustable in height. Sold as a complete set or in pairs. Hfjlhozagq Ujccqroh

Condition: excellent (used), Year of construction: 2010, Model Amada HFE M2 103t x 3110 3m, 8 axis Press Brake Year 2010 Very low hours Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg Feissler machine mounted Laser guards ,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm Hfelhccqozb Eg Rjrjh

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103-3 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 100-3 downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Hslhceyt H Awjcqrefh Motor Power 11 kw Weight 6800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2000, AMADA PROMECAM MODEL HFE 8025 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE Hslezbzq Sehccqrefh description TYPE HYDRAULIC DOWNSTROKING CAPACITY 80 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2500 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V000426 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2000 price POA

Condition: excellent (used), Year of construction: 1991, AMADA MODEL HFBE 170-3 170 tons x 3000 complete with DELEM DA 58 MULTI AXIS CNC CONTROL ERWIN SICK MACHINE MOUNTER ELECTRONIC GUARDING SUYSTEM SIDE AND REAR INTERLOCKED FENCING Bending force: 170 T Bending length: 3100 mm Distance between uprights: 2650 mm Cnc control: DELEM DA 58 Throat: 410 mm Vertical stroke: 180 mm Working speed: 10 mm/s Axis number: 6 Including Z axis Motor Power: 13 kW Hfslhcswcd Specqreh Machine weight: 10500 kg Machine dimensions (LxWxH): 3200 x 1700 x 2500 mm

Condition: excellent (used), Year of construction: 2001, year 2001 price POA stock no. 01859 Hslhccqszbqn Horjfh specification 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE HIGH SPEED LONG STROKE MODELSTOCK NO 02029 description TYPE HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 80 TONS CONTROL OP 2000 NO OF AXIS SEVEN BENDING LENGTH 2500mm OPEN HEIGHT 620 STROKE LENGTH 350 THROAT DEPTH 420 MOTOR SIZE15 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK SIDE INTERLOCKED FENCING REAR INTERLOCKED SERIAL NUMBER V011137 MAX APPROACH SPEED 200 MAX BEND SPEED 20 MAX RETURN SPEED 200

Condition: excellent (used), Year of construction: 2005, AMADA MODEL HFT 130-4 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 AMADA CONTROL 4 AXIS cnc control, FEISSLER machine mounted laser guards , side and rear interlocked fencing Model Amada HFT 13/3 downstroke CNC Press brake Year 2005 Tonnage 1300 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Hfelhozbqnyeccqreh Motor Power 11kw Weight 8750 kg Bed Length 3000 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Throat Depth 420 mm CNC Control Hfolhezbql Ssccqrjh 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 2008, Used 6-meter CNC press brake by Amada Type: HFE 400 6 L Capacity: 6100 x 400 tons Stroke: 350 mm Y1, Y2, X1, X2, R1, R2, Z1, and Z2 CNC controlled 9204 operating hours Weight: 36 tons Transport in 2 parts (main frame + separate lower table) Holhsy T Hltsccqrofh Self-adjusting crowning system in the lower table 450 mm mounted on the floor foundation Dismantling and loading included

Condition: excellent (used), Year of construction: 1999, Technical specifications: Max. cutting width: 4050 mm Max. cutting capacity for steel: 0.5 - 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Motor-adjustable parallel stop: 1000 mm Programmable cutting gap adjustment Hfelezcyn Sehccqroh Programmable cutting angle adjustment NC control: AMADA OPE1 Sheet metal holding function Motor power: 15 kW Dimensions (length x width x height): approx. 4800 x 2200 x 2150 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, power: 17 kW (23.11 HP), pressing force: 220 t, stroke length: 180 mm, throat depth: 420 mm, total width: 3,650 mm, total height: 2,900 mm, overall weight: 17,900 kg, Hydraulic press brake Manufacturer: AMADA, Type: HFB 220-30 H Year of manufacture: 1991 Technical data Manufacturer: AMADA Type: HFB 220-30 H Year of manufacture: 1991 Press force: 220 tons Bending length: 3100 mm Stroke: max. 180 mm Overhang: 420 mm Distance between side supports: 2750 mm Power: 17 kW Dimensions: L 3,65 m, W 1700 mm, H 2900 mm Weight: 12.9 t Equipment • Delem DA 58 2-D graphics control system • Controlled axes: Y1, Y2, X, R1, R2, Z • Large tool package, see photos • Amada quick-release tool clamping system All information is provided without warranty. Hslhcoy T R Ryocqrofh A live demonstration is possible at any time in our showroom.