Used Amada Hfe M2 2204 for sale (225)

Year of construction: 2010, condition: ready for operation (used), A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible. Hedpfjxv A E Sex Abronh

Condition: like new (used), Manufacturer: AMADA Model: HFE M2 2204 8 AXESL Year of production: 2016 Serial number: HFE-M2-220.4 LK101025 Number of axes: 7 (8 AXESL configuration) Press force: 2,200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Bending angle measurement: digital angle sensor Stroke: 'Long Stroke' (extended) Connected load: 20 kW Hnsdpfx Aex Trw Iebrsh Operating hours: 10,238 h Weight: 17,970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Additional equipment: Very large number of tools

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, working width: 4,100 mm, pressing force: 220 t, working range: 4,100 mm, Model: Used Amada HFE M2 220t 4metre x 220ton, 8 axis Press Brake For Sale Hydraulic Down Stroke Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Hnsdpfx Absv Tdbgoreh Throat Depth 420 mm

Condition: used, Amada HFE M2 5020 Brake Press with Amada CNC Control & Hand Remote, 2100mm Bed, Amada Quick Change Tooling System, Max Force 500kw, Max Stroke 200mm, Auto Backstop 3 Axis, Sick Light Guards. S/No. HFE MZ 5020 D100529 (2012) Machine Weight 4,700kg. Country of Origin: France Hnsdpfx Aboyid A Rsrjh Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Amada HFE M2 1704 Brake Press, 4100mm Bed with Amada CNC Control & Hand Remote, Amada Quick Change Tooling System, Max Force 1700kn, Max Stroke 200mm, Auto Backstop 3 Axis, Sick Light Guards. S/No. HFE MZ 1704 K100879 (2015), Machine Weight 13,800kg. Country of Origin: France Hjdpfeyidz Tex Abrjnh Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 100t 3m, 4 axis Press Brake Year 2012 available end January 2026 Hedpfxjx Hdthe Abrjnh Press Capacity (KN) 1000 Beam Length (mm) 3110 Distance Between Side Frames (mm) 2705 Throat Depth (mm) 420 Standard Stroke Length (mm) 200 Standard Open Height (mm) 470 Beam Width (mm) 60 Table Height (mm) 960 Approach Speed (mm/s) 1-100 Bending Speed (mm/s) 1-10 Return Speed (mm) 1-100 Number of Controlled Axis 4 Length (mm) 4580 Depth (mm) 2450 Height (mm) 2685 Weight (kg) 6900

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Brand AMADA Main Drive Pressing force 500 kN Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending Hedpfx Abjx D H I Horenh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, bending force (max.): 220 t, working width: 4,200 mm, stroke length: 350 mm, installation height: 620 mm, table height: 960 mm, TECHNICAL DETAILS Press Data Press force: 220 t Bending length: 4,200 mm Distance between uprights: 3,760 mm Stroke: 350 mm Installation height: 620 mm Table width: 180 mm Table height: 960 mm Approach speed: 100 mm/s Control: AMADA OP 2000 MACHINE DETAILS Connected load: 20 kW Machine weight approx.: 20,000 kg Operating hours: 8,444 h EQUIPMENT Backgauge type B Laser safety set Hnjdpfow Dcdtex Abroh Digital angle measurement system Digipro 2-finger kit Manual support system WILA Modufix system WILA hydraulic unit

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, 4 AXIS CNC BACKGAUGE BEAM LENGTH: 3100mm BENDING CAPACITY: 100 TONNES BEAM WIDTH 60mm DISTANCE BETWEEN FRAMES: 2705mm THROAT DEPTH: 420mm OPEN HEIGHT: 470mm STROKE 200mm WORKING HEIGHT: 960mm Hnsdpfx Aowphqiobrsh AMADA TOP TOOL HOLDERS

Condition: ready for operation (used), Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm Hodpfx Aboxabutjrsnh column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,650 h, controller manufacturer: AMADA, controller model: CNC 3i, number of axes: 8, This 8-axis AMADA HFE 3L 1003 press brake was manufactured in 2017. It features a pressing force of 100 tons and a bending length of 3,000 mm, complemented by an Amada CNC 3i control system. With only 3,650 operating hours, it is in excellent condition, fully functional, and ready for operation. Consider the opportunity to buy this AMADA HFE 3L 1003 press brake. Contact us for more information about this machine. Hnodsx D D Sispfx Abrsh Additional equipment • Accessories: Includes tool package by arrangement • Optional Tools: 2x 830 mm prisms and 2x 830 mm bending beams R5 Extra Information Condition: Very well maintained, as good as new, fully functional, ready for operation, can be viewed and tested by appointment Technical Specification Bending Length 3000 mm

Condition: good (used), total width: 3,000 mm, pressing force: 100 t, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Hjdpfx Aovwcdujbrenh Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3100 mm Frame width: 2760 mm Press force: 170 t CNC control: OPERATOR Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge Throat depth: 410 mm Stroke: 200 mm Hnjdpfx Aeyi Updebroh Working height: 960 mm Motor power: 16.5 kW CE mark Dimensions (Length x Width x Height): approx. 3500 x 2200 x 2900 mm Weight: approx. 11 tons Accessories: 1 pc. new upper tool 1 pc. new 4-sided die The seller is not liable for any typographical or data transmission errors. The machine is provided in a condition appropriate to its age for appearance, technology, and wear; used machines are sold without any guarantee or warranty.

Condition: excellent (used), Year of construction: 2003, Technical specifications: Working length: 4230 mm Distance between uprights: 3650 mm Pressing force: 170 t CNC control: AMADA Operator III graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 motorized adjustable backgauge Stroke: 400 mm automatic crowning Working height: 960 mm Motor power: 16.5 kW CE marking Dimensions (length x width x height): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tons Accessories: automatic measurement of the workpiece bending angle with automatic correction in the control system lateral movable safety fences LAN network operation infrared light curtain at the front and rear Hodpfxjyi Ud Ue Abrenh Condition: Very good condition, only 9,000 operating hours The seller is not liable for typographical or data transmission errors. The machine is sold in accordance with its age, using, technical condition and wear; used machines are sold without any guarantee or warranty.

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Hsdov S U Izspfx Abronh Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: AMADA, stroke length: 200 mm, overall weight: 11,600 kg, pressing force: 173 t, This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Hnjdpjyap Rwjfx Abrsh Machine Benefits Technical Machine Benefits • Voltage: 400 volts • Frequency: 50 hz • Nominal current: 286a • Foreseen power: 165kw Extra Information Machine still under power

Condition: used, Year of construction: 2000, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec table width 180 mm table height 960 mm oil volume 235 L 0 300 bar controlled axis 6 Anzahl Number of working hours 29.400 h total power requirement 16.5 KW weight of the machine ca. 11910 kg range L-W-H 4025 x 2020 x 2900 mm well-maintained condition (!!) with only approx. 29.400 operating hours - in checked condition - machine video - ?v=APP0HZjMms4 Hsdpfx Absxabgpsrjnh Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Travel range (X x Y):1525 x 3050 mm Control:AMNC-3i (21.5" screen size) Features :Punch & forming function :Good parts flap :scrap conveyor system Dimensions Length:5436 mm Width:6212 mm Hnodpfxjx I T Dxo Abrsh Height:2342 mm Weight:21500 kg

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 37 mm, overall weight: 21,500 kg, total height: 2,342 mm, number of axes: 4, This 4-axis AMADA EMZ3612M2 was manufactured in 2016, featuring a high-speed servo-electric turret punch press with twin AC servo direct drive. It boasts a 33-ton press capacity and an AMNC-F / AMNC-4ie CNC system for enhanced control. The machine handles sheet formats up to 3050x1525 mm and includes a "King" turret with up to 58 stations. Energy efficiency is optimized with AC servo drives. If you are looking to get high-quality punching capabilities consider the AMADA EMZ3612M2 machine we have for sale. Contact us for more information. Additional equipment • Air-blow oil-mist lubrication • Slug-vacuum system • Digital tool ID / barcode system • Integrated tapping: inch/metric taps (M2.5–M8) • Marking & deburring tools: on-board marking and deburring options Machine Benefits Technical Machine Benefits • Type: high-speed servo-electric turret punch press with twin ac servo direct drive • Press capacity: 33 tons (300 kn) • Maximum sheet format (without repositioning): 3050 × 1525 mm • Turret type: “king” turret – triple-track, available in 55-station multi-purpose or 58-station version, with 4 auto-index stations including tapping units • Turret rotation speed: up to 30 rpm • Feed clearance: 25 mm between turret plates • Max sheet thickness: 4. 5 mm Hnjdpfx Asx Nrktobroh • Positioning speed (x/y): 100 m/min / 80 m/min Extra Information Machine still under power Dimensions Machine Depth 5436 mm

Year of construction: 2009, condition: ready for operation (used), General Data Machine weight 6030 kg Main Drive Hnodox D Hzgopfx Abrsh Number of axis 8 Media Power consumption 15.2 A This 8-axis AMADA HFE 80-25 L press brake was manufactured in 2009. It features a nominal press force of 800 kN, a stroke of 320 mm, and a working speed range of 1-10 mm/s. The machine has a robust frame with a total weight of 6030 kg and dimensions that ensure stability and precision in operation. If you are looking to get high-quality bending capabilities, consider the AMADA HFE 80-25 L machine we have for sale. Contact us for more information. Application Types Bending

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm can be demonstrated under power Hodpju Iukfsfx Abrenh BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, functionality: fully functional, Year of construction: 2004, Amada HFE 220- L Year of construction 2004 Laser height adjustment Working width 3100mm pressing force 220 tons Hnsdpfouiwypjx Abrsh with many tools

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: CNC control, bending force (max.): 130 t, working width: 3,100 mm, number of axes: 6, Equipment: CE marking, european tool clamping system, lower tooling, safety light barrier, upper tooling, Used Amada HFE 3metre x 130ton cnc pressbrake for sale TYPE HYDRAULIC DOWNSTROKING CAPACITY 130 TONS CONTROLLED AXIS Hnsdpfsw Ugg Eex Abroh Y1, Y2, X, R1 R2 Z1 Z2 MAX BEND LENGTH 3000 MM OPEN HEIGHT 470 YEAR 2001 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR POWER 11 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED FENCING TONNAGE 1300 KN APPROACH SPEED 100 MM/SEC BENDING SPEED 1 – 10 MM/SEC RETURN SPEED 1-100 MM/SEC OIL CAPACITY 110 LITRES WEIGHT 7800 KG BACK GUAGE STROKE (X AXIS) 700 MM/S MAX GUAGE 1000MM

Condition: refurbished (used), Year of construction: 2005, AMADA MODEL HFE 130-3 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 130-3 downstroke CNC Press brake Year 2005 hours 9000 Tonnage 1300 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 7800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power Hsdpfx Aothgidsbrjnh BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2000, Type of machine HFE220-3L WILA TOOLING SYSTEM WITH FUL L LENGTH HYDRAULIC CLAMPING LARGE AMOUNT OF WILA TOOLING Maximum press force 2200 Hedpfx Ajv Rw Risbrjnh Minimum usable press force 260 Beam length 3220 Distance between frames 2700 Throat depth 420 Stroke length 350 Open height 620 Minimal increment 0.01 Positioning accuracy of the beam 0.01 Beam width 180 Table height 960 Approach speed without protection 10 Approach speed with protection 100 Maximum bending speed 10 Return speed 100 Motor power 18.5 Mains rating 20 Mains voltage 400 Mains frequency 50 Hydraulic oil capacity 295 Maximum hydraulic pressure 300 Length overall +/- 10 mm 4360 Depth overall +/- 10 mm 2660 Height overall +/- 10 mm 3200 Weight approximate 15350