Used Angle Transfer for sale (10,091)

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M08E/9110, Offer Number: M08E/9110 Machinetype: 2 die - 3 blow transfer header Make: NAKASHIMADA Type: NP80 Constr. year: 1992 diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm Gbodsyya Rpopfx Al Uju shaft length under head: 80 mm output - pieces/min: 150 press power: 60 t Location: Europe

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M08I/8941, Offer Number: M08I/8941 Machinetype: 2 die - 2 blow transfer header Make: SACMA Type: SP22 Constr. year: 1976 diameter range: 10 mm number of dies: 2 Gsdpfx Aswi Td Ijl Uobu number of stations (incl. cut off): 3 cutting length: 110 mm shaft length under head: 100 mm output - pieces/min: 170 Location: Germany

Year of construction: 1992, condition: excellent (used), functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x250x50mm Godpfsq I R N Rjx Al Ujbu Perpendicularity 1µm 4-sided! Measurement report on request for an extra charge

Condition: good (used), 6600 mm Rexroth conveyor system Conveyor system with its own drive for transporting workpieces in a longitudinal direction or for lateral transport of the workpiece carrier between parallel conveyor systems in conjunction with a lifting-lateral unit to transfer from a longitudinal to a lateral line and vice versa. Manufacturer: Bosch Rexroth Voltage: 3 x 400 V 50 Hz (16 A) Control voltage: 24 VDC Gjdexzgg Dspfx Al Ujbu Conveyor medium: Toothed belt Belt section: 6600 x 500 mm Lifting-lateral unit: 500 x 430 mm Belt height: 990 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Gbjdpfow Hglmex Al Uou

Year of construction: 2014, condition: good (used), functionality: fully functional, overall weight: 3,000 kg, total length: 4,760 mm, total width: 3,115 mm, total height: 2,360 mm, number of previous owners: 1, input frequency: 50 Hz, control voltage: 230 V, conveyor belt width: 2,000 mm, machine/vehicle number: F.24444.11.07.01, Equipment: 3rd hydraulic function, We are pleased to offer you the unique opportunity to purchase immediately available, single-station special machines. These are two single-station forming systems from the premium manufacturer FRIMO. They were used in the automotive sector and were in production until recently. The systems feature forming functions, shuttle handling for part transfer via the upper tool, multiple punching units on the lower tool, and automatic removal of the produced components to the rear via a conveyor belt. Gedpozrg I Ajfx Al Uebu These are machines that are being returned due to the closure of a factory. The systems are currently located at the FRIMO plant in 83395 Freilassing and can be inspected at any time.

Condition: new, Hazar Makina HM625 Transfer Printing Machine Year of manufacture: 2021 Model: 600 Printing width: 2000 mm Calender cylinder diameter: 625 mm Electrical power: 40 kW Electrical power consumption per hour: 18 kW Heating system: Heating oil (uniform heat distribution) Machine control panel: 7-inch LCD PLC system Cooling system: Automatic Heater power: 30 kW Motor power: 2.2 kW Heating time: 70 minutes Sealing clamp and guide system: Automatic (pneumatically controlled linear slide) Cylinder temperature control: Automatic dual control of outer and inner surfaces Printing speed: 3–7 meters per minute Gsdpfeq Rd Rcox Al Uobu Felt: Nomex Item condition: Showroom model You can find more printers in other sizes – new and used – in our shop! International shipping available upon request!

Condition: used, _____ Description: Year of manuf. : 2018 Control : Fanuc 30i-B In General: Year of construction:2018 Control system:Fanuc Processing stations:5 pieces Loading station:1 piece Travelling range: X-axis:450 mm Y-axis:500 mm Z-axis:450 mm Rapid traverse X/Y/Z:50 m/min Turret: Number of stations:8 Speed:13,300 rpm Torque:58 Nm Tool holder:HSK 63 C Workpiece/device: Dimensions max.:350 x 350 x 350 mm Max. permissible mass:250 kg Media supply line:6 pieces Gjdpfx Aovr Az Njl Uobu NC swivelling rotary table: A-axis:+/- 150° B-axis:360° Max. load:250 kg Table diameter:320 mm Equipment: Loading/unloading:Fanuc Robot M20i-A Chip removal:2x chip conveyors Coolant supply:IKZ system, 20 bar Position measuring systems:Direct in all axes

Condition: used, Year of construction: 2010, Clamping tower, manufactured by AMF, with 6 clamping surfaces. Dimensions: 600 mm x 600 mm x 1060 mm Gedpocum N Sofx Al Uebu Clamping surfaces: 290 mm x 1060 mm (6 sides) Grid pattern of holes, spacing: 50 mm x 50 mm (100 holes per side with threads and clearance holes) Base plate: 760 mm x 735 mm x 50 mm Overall height: 1110 mm 2 units in stock. Price quoted is for 1 unit.

Condition: repair required (used), Year of construction: 1972, Manufacturer WEINGARTEN Model VK.1250.46.76 Condition Used Warehouse number cod.323 Structure Double upright Used press Thrust: 1,250 ton. Thrust points n°4 Plunger kinematics Slide stroke 762 mm. VERTICAL LIGHT from the mold holder, CBRA 1,530 mm. Slide - registration 610 mm. Mold holder surface size 4,460 x 2,400 mm. Extractable carriage n°2 lateral exit (possible mold of 5,000 mm) Gedovm Eifjpfx Al Usbu Mold holder surface height 400 mm. Number of strokes/min 8/18 Front useful passage 4,400 mm. Sheet metal passage in the upright 2,400 mm. Hydraulic safety Present

Year of construction: 2015, condition: ready for operation (used), Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. Gbsdpfop S Sq Dex Al Ueu

Year of construction: 2018, condition: good (used), Fully automatic angle welder / Fully automatic side welding machine Manufacturer: Diez Type: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Operating side: Left when facing the direction of travel Passage width: approx. 600 mm Passage height: approx. 190 mm Welding length: approx. 900 mm Working height / belt height, infeed/outfeed: approx. 860 mm + 100 Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230 V AC, 50 Hz, 1 phase + N + PE Power consumption: 3.5 kW Rated current: 10 A With cable and 16 A Schuko plug Gedpfx Alotzcd So Uobu Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 51026ä

Condition: excellent (used), Bosch winding head assembly machine You are purchasing a high-quality winding head assembly machine for armature production. The primary application area is armature production. Manufacturing/production/operating documentation is included with the machine. Godpfxog Ibyrs Al Uebu Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Gsdpfx Alszrhhqj Ujbu

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Godpfxsmck Ryj Al Uobu Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: like new (used), Year of construction: 2019, Mossini Transfer Press PDM/4BLD Pressing force: 2,000 kN Table area: 6,000 x 2,500 mm Slide area: 6,000 x 2,500 mm Stroke height: 900 mm Gedpfez Dw U Ujx Al Uebu Strokes per minute: 10 - 25 1/min Slide adjustment: 400 mm Overall height: 1,270 mm TOTAL STROKES: 1,000,000 strokes NORDA Transfer X-axis travel: 0 - 1,200 mm Y-axis travel: 0 - 1,125 mm Z-axis travel: 350 mm Max. transport weight: 200 kg Mill tool strip system Strip width max. up to 1,850 mm Strip thickness: 0.5 - 3.0 mm Coil load capacity: 24,000 kg

Condition: used, For sale is a welded T-slot angle bracket for clamping workpieces on a drilling machine. Gbsdpfx Aeznv E Nsl Uju Dimensions: Leg lengths 1500 x 850 Width 1400

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Godpoznn Hlofx Al Uebu Weight: 80 kg Good condition

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Serial Number 5531 Year 1988 Pristine Condition Gbedpfx Alodg Da Io Usu Not been used for 15 years

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: Gedpfxju Idv De Al Uobu - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles Godpfxju Idvwe Al Usbu for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: refurbished (used), K+G Weather angle grinder 114 Motor power 12 kW, 28 a stainless steel with feed ring screw, 2 speeds weight:615 kg Machine size 70x100x128cm Of course it is possible to visit the machine by appointment. Errors and prior sale reserved. All information is non-binding. The correctness and accuracy of the information and prices are not guaranteed. Godpfxjnp Hqde Al Ujbu A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Ceramic angle standard from Wilbanks (CoorsTec) 600x460x80mm Perpendicularity < 4µm Gbjdjq Tdlzspfx Al Ueu Little used, very good condition Measurement protocol on request (surcharge)

Condition: ready for operation (used), Year of construction: 1997, A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible. Gedpfx Alsu T Rg Rs Uobu

Condition: good (used), E Shrink Packaging LB-728 + LB-201 Angle Sealer with Shrink Tunnel This machine is practically new, ready for production. Used in every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply place the goods to be packaged on the conveyor belt, and the machine does the rest. Godpfx Alozur Aws Ujbu Machine parameters are set from the control panel. Sealer dimensions: 565x460mm Tunnel entry dimensions: 370x230mm Weight: 550kg Power supply: 380V Installed power: 14 kW (total peak power, continuous operation max. 5 kW) Capacity: approx. 1560 pcs/h