Used Arg 220 Plus for sale (11,802)

Condition: good (used), Wet grinding stone, column grinder, column grinder Kedpfx Ahscmh H Uoaenc -Wet and dry sander -Grinding wheels: 220 x 40 mm -Motor: 0.55 kW -Speed: 600 rpm -Dimensions: 650/300/H1200 mm -Weight: 80 kg

Condition: used, Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks Knjdpfx Ahjdnaz Nsaoc -Chuck size: Ø 220 mm -Taper cone: Ø mm -Mounting hole circle: mm -Through hole: 50 mm -Exchangeable jaws: -Weight: 25 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake Kedpsb A Nlrsfx Ahaonc -Tool radius: 5 mm -Dimensions: 45 x 220 mm -Length: 2400 mm -Weight: 120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, filter unit special for laser machines till 6 KW laser head Ksdpstttfcefx Ahasnc

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) Knsdera Rbgepfx Ahaec HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: new, Year of construction: 2025, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech. Knedpfxsnq Aibo Ahasc

Condition: new, Year of construction: 2025, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can be amortized in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Kedponq Dkijfx Ahajnc Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 06 1168, Tilting mixer with 3 mixing bowls Kedpfx Ajk H A I Sjhasnc Used machine with a 6-month warranty Overhauled and repainted by a specialist Electrical system newly installed by a switchgear construction company Advantages: + All 3 mixing bowls are made of stainless steel, the lifting arm is also made of stainless steel + With flour dust hood, with automatic shut-off when lifting + Tilting mixer for particularly gentle mixing processes + With drilling holes for anchoring in the ground + Complete overhaul in our workshop, according to German quality standards + Only high-quality original parts are used + Machine has been finally inspected by our master baker Technical data: - Flour capacity: max. 75 kg - Dough capacity: max. 120 kg - Bowl volume: approx. 180 liters - Motor power: 8 kW - Connection values: 380V - 3-phase - 50Hz - Fuse: 16A CEE plug

Condition: used, Operator panel, machine control, operating unit, operating panel, handheld terminal, handheld control unit -Control unit: Hand terminal for press brakes or similar use Kodpfx Asul H E Iehasnc -Connection cable: see photos -Transport dimensions: Ø 400 x 200 mm -Weight: 4.8 kg

Condition: used, Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 4 pieces, for machine tools and systems -Price: complete Ksdpfx Asfzlv Aehaonc -Dimension: Ø 220 x 105 mm -Weight: 5,5 kg/piece

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head Kodpfx Aju Rib Rohaonc -Type: Secodex R220.13-8200-C -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Inverting plates: 12 pieces -Dimensions: Ø 220 x 60 mm -Weight: 9.0 kg

Condition: good (used), gear, gears, gear shaft, pinion shaft -Gear shaft: straight-toothed pinion shaft Ksdowcxtzjpfx Ahaonc -Gear: Diameter Ø 42 mm / 14 teeth -Tooth width: 83 mm -Dimensions: see photo technical drawing -Number: 9x gear shaft available -Price: per piece -Total dimensions: Ø 42 x 220 mm -Weight: 0.9 kg/piece

Condition: used, Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Kedpfsv Akmzex Ahaonc Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: used, mileage: 30,504 km, power: 158 kW (214.82 HP), first registration: 06/2009, fuel type: diesel, empty load weight: 6,900 kg, maximum load weight: 9,100 kg, overall weight: 16,000 kg, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,600 mm, brakes: constant throttle, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 9,820 mm, total width: 2,550 mm, total height: 3,530 mm, loading space length: 7,600 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, Equipment: ABS, air conditioning, cabin, cruise control, fog lights, low noise, spoiler, Vehicle location: Bovenden, license plate house, 1x air seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, ABS (anti-lock braking system), constant throttle, roof spoiler, raising+lowering, fog lights, leaf-air suspension, low-noise G1, environmental badge green Wheelbase: 5600 mm Body: Body: Valcar, beverage case load securing, without body ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ksdevhhd Uspfx Ahaonc - .

Condition: used, mileage: 30,504 km, power: 158 kW (214.82 HP), first registration: 06/2009, fuel type: diesel, overall weight: 16,000 kg, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,600 mm, brakes: constant throttle, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 9,820 mm, total width: 2,550 mm, total height: 3,530 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, spoiler, Vehicle location: Bovenden, license plate house, 1x air seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, ABS (anti-lock braking system), constant throttle, roof spoiler, lifting+lowering, differential lock, fog lights, leaf-air suspension, low-noise G1, green environmental sticker Knedpfx Ahevhhrreajc Wheelbase: 5600 mm Body: with roll-off body for containers up to 5.5 m for a surcharge of EUR 15,000 On request with 8-14 m/t crane for a surcharge of EUR 15,000 to 25,000! Payload with crane up to approx. 7t depending on size! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Boxmaker 2500 working width, fully automatic, 2 flexo printers 500x200 mm, 2 die cutters for hand holes, or depending on the installed die, year of manufacture 2023. Kedexgbycepfx Ahaenc

Condition: used, Ladegerät für Elektrostapler - Charger for eletric Forklift Still D 48/125 eco Baujahr / Year 2005 - Serial-No. Eingangsspannung / Input AC3/PE - 400V 50Hz 10,4 kVA 15,0A Ausgang / Output DC 48V/125A  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Kodsxgi I Uspfx Ahaonc

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Knjdov Sthgspfx Ahasc Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2006, condition: ready for operation (used), Manufacturer: Wittmann Model: TP-PLUS -2:90 Knjdpsyk Tmqjfx Ahaec

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.5 kW -Output: 220 V 200 Hz -Power: 6.5 kW -for edge banding edge banding machine -Dimensions: 330/650/H270 mm -Weight: 105 kg Ksdpfxsu I Hn Ne Ahaonc

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 43550 € 831.81 € 1550 mm 12 mm 12 mm Ksdpfsynmx Iex Ahasnc 10 mm 10 mm 8 mm 220 mm 200 mm 160 mm 1,5 / 6 m/min 5.5 kW 3900 mm 1150 mm 1250 mm 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1781.01 € 10 mm B 16 180 mm Knsdpfx Aeynmz Nohaoc 250 - 3000 U/min 0,45 kW 400 mm 248 mm 460 mm 30 kg 50 mm 105 - 245 mm 300 x 200 mm 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Kodpfx Ahjzzrmpoasnc Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: used, functionality: fully functional, machine/vehicle number: 904xxxxx, Year of construction: 2014, operating hours: 4,326 h, load capacity: 2,000 kg, lifting height: 2,010 mm, free lift: 100 mm, fuel type: electric, mast type: simplex, construction height: 1,530 mm, fork length: 1,190 mm, empty load weight: 1,381 kg, total length: 2,656 mm, drive type: Elektro, construction width: 770 mm, High-lift pallet truck Chassis number: 904xxxxx Load center: 600 Mast type: Standard Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Polyurethane Front tire size: Load rollers, polyurethane, tandem Rear tire type: Polyurethane Rear tire size: Drive wheel, polyurethane Battery voltage: 24V Kodpfozxi Ilox Ahasnc Battery capacity: 465Ah Battery manufacturer: IBV Battery type: PzS Battery year of manufacture: 2021 Description: Serviced, technically and visually refurbished, inspected according to UVV (German accident prevention regulations), without warranty/liability for defects Impulse control, initial lift, fixed standing platform, electric steering, double-stacking device - 2000 kg lifting capacity as an electric pallet truck, 1000 kg as a tow truck, discharge guard, hour meter, side battery removal, battery (03/2021) with Aquamatik system, external charger included

Condition: excellent (used), functionality: fully functional, mileage: 82,262 km, fuel type: diesel, axle configuration: 2 axles, fuel: diesel, gearing type: mechanical, suspension: steel, total length: 4,763 mm, total width: 1,660 mm, total height: 1,350 mm, Year of construction: 2012, Equipment: airbag, MERCEDES VITO 2.2 CDI 110, YEAR 2012 - MILEAGE 82,292 km - INTERNAL LENGTH 2240 mm - HEIGHT 1350 mm - WIDTH 1660 mm - PAYLOAD 910 kg - ABS - ELECTRIC WINDOWS - RADIO - 3 SEATS IN THE CAB - FOR INFORMATION, CONTACT FRANCESCO: 3356514297. Knodpfxsz Et Rbs Ahaoc