Used Asv Pt 100 for sale (25,186)

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. Njdpfx Aljxv Dv Eeaocw It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002569 The Mettler Toledo InPro 3253/225/PT1000 is a highly specialized sensor typically used in industrial applications for measuring pH, ORP (oxidation-reduction potential), or temperature in harsh conditions. It is part of the InPro series from Mettler Toledo, which produces high-quality sensors for process automation pH or ORP sensor: The sensor can measure the acidity or alkalinity (pH) or the potential difference between two electrodes (ORP), which is crucial in many industrial processes, like chemical manufacturing, water treatment, and food processing 1. Type: pH or ORP sensor: The sensor can measure the acidity or alkalinity (pH) or the potential difference between two electrodes (ORP), which is crucial in many industrial processes, like chemical manufacturing, water treatment, and food processing. 2. Application: This sensor is suitable for liquid measurements in aggressive or challenging environments. It can be used in a variety of industries, including pharmaceuticals, chemicals, water treatment, and food production. 3. Design: The sensor features a robust design with high chemical resistance and high temperature tolerance, making it ideal for environments with aggressive chemicals and fluctuating temperatures. 4. PT1000 Temperature Sensor: The model includes a PT1000 temperature sensor. This is a type of RTD (resistance temperature detector) that measures the temperature of the process. The PT1000 provides accurate temperature compensation for the pH or ORP readings, ensuring more precise measurements. 5. Mounting: The sensor is designed for easy integration into process systems, typically in industrial process pipelines or tanks. It can be installed in-line or submersible, depending on the application. 6. Electrode Material: The electrode material is typically made from high-quality, durable materials like glass or ceramic, ensuring long life and stability even in corrosive environments. 7. Calibration: It usually supports automatic calibration features, making maintenance simpler and enhancing its reliability. 8. Temperature Range: The sensor can measure over a wide temperature range, often from 0°C to 130°C or higher, depending on the specific model and application. 9. Compatibility: It is typically compatible with Mettler Toledo process transmitters and analyzers, ensuring seamless integration into existing monitoring systems. 10. Durability: The sensor is built to handle rugged environments, with high pressure, high flow rates, and vibration resistance, typical in industrial setting Nodoxv Dwcspfx Alaocw

Condition: excellent (used), Year of construction: 2009, Horizon Brochure Production Line Collating Machines Horizon VAC 100a, VAC 100m Number of Stations: 2x10 Max. Format: 500 x 350 mm Min. Format: 148 x 120 mm Loading Capacity: 55 mm per station Speed: up to 9,500 cycles/h Weight: 320 kg per tower Machine Dimensions: 810 x 652 x 1,961 mm Power Supply: 230 V, 10.6 A, 2.3 kW HORIZON ST-40 Stacking Table Specifications Max. Format: 350 x 500 mm Min. Format: 182 x 128 mm Paper Thickness: 52 – 208 g/m² Speed: up to 8,000 sets/h Stack Height: 360 mm Machine Dimensions: 1,353 x 652 x 1,027 mm (L x W x H) Nedpeyhzubjfx Alaocw SPF 200A Stitch-Fold Station Infeed Format (4-page sheet): min. 180 x 105 mm, max. 508 x 356 mm Brochure Final Size: min. 85 x 105 mm, max. 250 x 356 mm Brochure Thickness: up to 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with FC-200A front trimmer) Machine Dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Power Supply: 230 V, 5.3 A; 1.0 kW Trimmer: FC 200A Available from 05/2026.

Condition: new, fuel type: electric, color: white, Year of construction: 2021, Year of manufacture: 2021 Model year: 2021 Usable material: Concrete CE marking: yes Ncjdpfouu A Tyox Alaow Damages: none Price: On request

Condition: used, spindle diameter 125 mm x-travel 2000 mm y-travel 1100 mm z-travel SK 50 mm spindle taper Philips 2500 digital readout Pfillips turning speeds 925 U/min spindle stroke 800 mm Table 1000x1400 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Nodpfx Aloyt R Aneascw If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500 Ncsdpfxod Eauko Alasw

Condition: new, Year of construction: 2026, Machine type: BPT 1000 Manufacturer: ERBA Power: 2 x 5.5 kW Total volume: 1,000 L Description: The ERBA BPT 1000 twin-motor long trough vibratory finishing machine is ideal for ball polishing or processing heavy workpieces. Thanks to its two motors, it can handle even particularly heavy media loads and applies the necessary pressure to the workpieces. Ncodjyq Rcpopfx Alajw It is equipped with a durable hot-cast polyurethane lining. Emptying or separation is performed via a bottom outlet (manual/pneumatic). The process chamber can be partitioned using removable dividers, allowing for individual processing of parts. The machine comes with an electrical control cabinet and can optionally be fitted with fully automatic PLC process control. The motor speed can be infinitely adjusted by means of a frequency converter (optional). As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The listed price is net, plus the currently applicable statutory VAT and freight costs. The pictures may show the system including optional accessories, which are available at additional cost. The quoted price refers to the base machine. The photos are for illustrative purposes. Actual appearance and size may differ from the images. If you are interested, we look forward to hearing from you. We are happy to provide you with a consultation, with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer is for presentation purposes only. Contract negotiations take place via telecommunication (Email, phone, messaging portal). Initially, we will send you a non-binding quote, along with our general terms and conditions including imprint and information on the right of withdrawal, before any purchase/contract is concluded.

Condition: good (used), Year of construction: 1999, AXOMATIC OPTIMA 1000 Tube Filling and Sealing Machine (Plastic Tubes) This compact machine has a capacity of up to 70 plastic tubes per minute and is used for filling and sealing tubes. With the appropriate format and pump sets, the machine can be adjusted to handle the following specifications: Tube diameter: 10 - 60 mm Tube length: up to 280 mm Filling volume: 2 - 300 ml The machine is offered with the following format parts: Ncodex Rqlfspfx Alaow Tube holders for plastic tubes Ø 35 mm and 48 mm Manufacturer: Optima Year of manufacture: 1999 Required floor space: approx. 180 x 160 x 240 cm

Condition: new, Year of construction: 2025, functionality: fully functional, filling weight (max.): 20,000 g, Gear pump unit with 20-liter capacity and 4 connections for 4 hot melt hoses. Temperature sensor PT100. Temperature sensor Ni120 available on request. If you have any further questions, we are at your disposal. Nsdpfxsxa Azhj Alaocw

Condition: new, Year of construction: 2023, Semi-Autom. Screen Printing Machine TIC SC1000 OptiPass Curve printing machine, stand model, printing size: 200x700mm or printing ø: 600x700mm (Attention: when ø 600mm no 360° all-round printing possible), max. screen frame size: 930x530x30mm. Machine with base frame and height-adjustable feeding table incl. x/y-adjustment. Height adjustment of the feeding table: approx. 250mm, therefore max. height of the printing object: approx. 600mm. With safety frame all-around the sides of the upper frame, equipped with 2sets of squeegee, motor-controlled lateral frame movement for curve printing and rotation of the printing object, machine control via touch-panel, registering by optical sensor, when printing in multi-colour-mode register accuracy is approx. 1mm, drive components 'Made in Japan', compressed air connection: 6bar, supply voltage: 230V, 50Hz Electro-pneumatic machine, micro-processor control. Curve printing machine with universal reception for cylindrical objects as well as optical fitting system for multi-colour printing, with inflation device, printing movements separately adjustable during set-up operation, squeegee stroke, squeegee speed and floodbar infinitely adjustable Delivery time 16-18 weeks Ncsdpfx Aljhrdn Isajw

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 7163-AI, load capacity: 1,000 kg, empty load weight: 420 kg, load capacity per storage section: 1,000 kg, operating hours: 234 h, BT OPTIO TSE100W-713 Tow Tractor, Year of Manufacture 2018 Nsdpfxex Sydtj Alaocw Specifications: BT OPTIO TSE100W-713 Year of Manufacture: 2018 Recorded Operating Hours (h): 234 Load Capacity (kg): 1000 Own Weight (kg): 420 Front Tyres: Polyurethane Rear Tyres: Polyurethane Battery Year of Manufacture: 2022 Battery Capacity (Ah): 105 Battery Voltage (V): 24 (2 x 12 V) Additional Equipment: Blue safety lamp at front.

Year of construction: 2024, condition: as good as new (ex-display), -Usable internal dimensions: D = 970 mm, H = 540 mm Ncedpfx Aef A Nq Uelaew (other sizes available upon request) -Touch screen -Spray pressure: 3 bar -Basket load: 200 kg -Tank volume: 210 L -Standard accessories: • Oil skimmer • Frame, lid, and housing made of stainless steel • Time-controlled electric steam extraction • Reinforced basket made of stainless steel • Electric pump made of stainless steel • Filter made of stainless steel on the suction side of the pump • Heating elements made of stainless steel • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) • Automatic water supply • Safety limit switch monitors lid opening • Spray nozzles made of stainless steel • Weekly timer for heating and oil separator • Operating hour counter

Condition: ready for operation (used), 100,000 liter stainless steel tank, insulated It has a heating coil running along the entire height of the tank Wed. 3.15m Ncsdpsn E N N Esfx Alaow Height 16.50m

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 100 mm, controller model: Heidenhain 415 B, TECHNICAL DETAILS Spindle diameter: 100 mm Travel in X-axis: 5,020 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 2,000 mm Tool holder: SK 50 MACHINE DETAILS Control system: Heidenhain 415 B Rotary table dimensions: 2,500 x 2,000 mm Ncsdpfx Aezlryqjlajw EQUIPMENT Indexable milling head 2.5 60-position tool changer Rotary table manufacturer: Scharmann Note: The rotary function of the rotary table is defective. The machine is sold without pallet changers.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 10,000 kg, lifting height: 4,800 mm, fuel type: diesel, construction height: 2,970 mm, No minimum price – guaranteed sale to the highest bidder! Machine with only 1 operating hour! Nodpfx Aoznaa Rslascw TECHNICAL DETAILS Load capacity: 10,000 kg Lifting height: 4,800 mm Overall height: 2,970 mm MACHINE DETAILS Drive type: Diesel Front tires: Superelastic Rear tires: Superelastic Operating hours: 1 h External reference: HEL0315TR655

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 10,000 kg, lifting height: 6,000 mm, fuel type: electric, construction height: 3,425 mm, No minimum price – guaranteed sale to the highest bidder! Machine with only 1 operating hour! TECHNICAL DETAILS Load capacity: 10,000 kg Lifting height: 6,000 mm Overall height: 3,425 mm MACHINE DETAILS Njdpszm U U Hjfx Alaocw Drive type: Electric Front tires: Superelastic Rear tires: Superelastic Battery voltage: 80 V Battery capacity: 808 Ah Operating hours: 1 h External reference: HEL0234TR007

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, overall weight: 2,500 kg, conveyor belt speed: 250 mm/s, conveyor belt width: 1,000 mm, temperature: 200 °C, machine/vehicle number: ST0403, production capacity: 240 unit/h, TECHNICAL DETAILS Nodpfxjzmr Ecj Alajcw Number of conveyor belts: 1 Belt width: 1,000 mm Belt height: 830 mm Belt height adjustment: 50 mm Belt speed: 1–15 m/min Infeed length: 1,200 mm Length of heating zone: 3,000 mm Tunnel height: 100 mm Temperature: max. 200 °C Drying rate: 800–2,500 m³/min Outfeed length: 1,200 mm Output: max. 240 T-shirts/h MACHINE DETAILS Electrical voltage: 400 V AC Current: 16 A Mains frequency: 50/60 Hz Gas burner output: 1 × 55 kW Dimensions & Weight Dimensions (L x W x H): 5,400 x 1,300 x 1,700 mm Weight: 2,500 kg

Condition: used, machine/vehicle number: 008108, Max width workable: 1050 mm Max length workable: 2400 mm Max height workable: 250 mm Ncodew Idduopfx Alajw

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Nodpfx Aowcfgbslascw Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Year of construction: 2023, condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. Nedsgay Udopfx Alaecw All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW Nedpfjv Ehbbsx Alascw weight of the machine ca. 7,8 t dimensions of the machine ca. 4,40x3,95x3,01 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Year of construction: 2023, condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. Ncodpfx Aljgay Uheaew All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Njdpfxjzfh U Dj Alascw Capacity: 100 L Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kingsland HACO ERMS 30 – 100 CNC Pressbrake Model: ERMS 30 – 100 Year: 2006 Control: ATS 560 Capacity: 100 Ton x 3100mm Njdpewwvx Dofx Alascw Max. Bending Length: 3100mm Distance Between Columns: 2550mm Machine with: Light Guards Full length top and bottom tooling

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 725 h, load capacity: 1,600 kg, lifting height: 5,400 mm, free lift: 1,894 mm, fuel type: electric, mast type: triplex, construction height: 2,371 mm, fork length: 1,150 mm, empty load weight: 1,439 kg, total length: 849 mm, drive type: Elektro, construction width: 790 mm, High-lift pallet truck Load center: 600 Mast type: Triplex Technical condition: good Front tire type: Polyurethane Front tire condition: 80 - 100% Rear tire type: Polyurethane Rear tire condition: 80 - 100% Njdpfjzdlybsx Alaecw Battery voltage: 24V Battery capacity: 210Ah Battery year of manufacture: 2021 Description: Thorough equipment cleaning, a fresh coat of black paint, polishing of the orange hoods, new maintenance, new inspection according to FEM Impulse control, full free lift, CE certificate