Used Auger Drill for sale (5,228)

Condition: used, functionality: fully functional, Radial Drilling Machine WRA 40 x 1250 – used For sale: radial drilling machine WRA 40 x 1250 in good working condition. The machine is fully functional, connected to power and available for inspection under power. 🔧 Condition used (not overhauled) fully operational ready for testing inspection possible ⚙️ Technical data Drilling capacity steel/cast iron: 40 / 50 mm Arm reach: 250 – 1220 mm Spindle distance: 380 – 1580 mm Spindle stroke: 355 mm Spindle taper: MT4 Speed range: 20 – 2500 rpm Number of speeds: 15 Feed range: 0.063 – 2.5 mm/rev Motor power: 4 kW Machine weight: approx. 3600 kg 🧰 Equipment coolant system 24V lighting drilling table Morse sleeves tools and documentation 📦 Terms price: on request location: Poland loading possible transport can be arranged Dujdpfx Aeyy Rcpoffor

Condition: used, machine/vehicle number: 007805, Max. panel width: 3200 mm Dsdpfxox A E Sue Affsur Max. panel length: 1200 mm No of Bottom Units: 6 No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, Screw conveyor, trough auger, trough conveyor, used machine Duedpjyzihmjfx Affjr Overall dimensions: 2910 x 600 x 480 mm Trough dimensions: 2170 x 430 x 440 mm Drive: sprocket-driven, but without motor

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Dsdpfjyxy S Rsx Affsur Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: used, Universal tool milling machine with active digital display DECKEL Type FP 1 Universal milling machine Machine No. 2102 - 3351 Year of manufacture: 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN Type TNC 113 - Infinitely variable feed via servomotor in X, Y, and Z axis - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on the vertical milling head: 60 mm - Vertical milling head can swivel and extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated into machine base Dedpoyxy Swefx Affsur - Free-standing control cabinet - Original chip tray for placing on machine base - Operating manual, electrical diagram, spare parts list available in PDF format Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. Dsdpoyyw S Refx Affsur Max. working width (mm) 3200. Min. working width (mm) 215 N. 2 Horizontal units/supports N° 2 Drilling heads for each horizontal unit (11 Spindles for each horizontal drilling head) N. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 4 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display. Total installed power (Kw) 62,7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: excellent (used), Numerical Control Type NC 400 Deluxe Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 1 Splindles for each horizontal drilling head (N°) 20 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Dedpfxsyyw Sds Affsur Transport belts to evacute chips (wastes) (N°) 2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts Total installed power (Kw)

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional TECHNICAL DATA Dujdpfxox Rqk Ij Affer - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, Column Drilling Machine ALZMETALL ALZSTAR 30/S Dujdpfxeyybqdj Affor Year of manufacture: 2012 Drilling capacity in steel: 30 mm Thread cutting in ST 60: M16 Clamping table surface: 514 mm x 360 mm Safety guard Drilling depth: 140 mm Spindle taper: MK 3 Spindle speeds: 225 rpm – 4300 rpm, stepless with digital readout Drill table illumination 1 pc. drill chuck up to 13 mm Machine vice

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Djdpfx Ajg U Uv Uoffjur Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: excellent (used), functionality: fully functional, power: 125 kW (169.95 HP), emission class: euro5, Year of construction: 2020, operating hours: 5,500 h, Conrad Boxer 200 drilling rig with desanding unit Advanced wash drilling system, ideal for clay soils and geothermal applications. Includes 150 meters of drill pipes. The machine is equipped with a custom sand separation unit that efficiently separates clay and water, optimizing the drilling process. Hydraulically driven crawler chassis with rubber-vulcanised track shoes, track width 400 mm. Self-supporting welded steel subframe with stabilizing cylinders. Iveco NEF 45 ENT diesel engine, approx. 125 kW. Fully equipped hydraulic system with stainless steel reservoir. Modem installation for remote diagnostics. Radio remote control for travel and drilling functions. Fixed control panel with lockable enclosure. Hydraulically folding mast for 4 m drill rods. Mast translation system with 400 mm stroke. Vertical hydraulic feed system. Drill carriage and guide rail system. 4-inch hydraulic drill head Conrad T-4-5-600. Djdpfsx Uyukox Affour Hydraulic tilting system. Weight compensator for drill rod protection. Hose and cable management system. Hydraulic top clamp. Hydraulic flushing pump. Prepared for displacement pump installation. Hydraulic piston pump. 3-inch water circuit with flow meter. Flow control valve. Hydraulic breakout clamp. Drill rod storage cassette. Pipe handling manipulator. Automatic lubrication system.

Condition: like new (used), Year of construction: 2012, Machine is completly refurbished by our technical staff Dedpfx Afsxn T Smofeur

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Duodpoxmatnsfx Affsr Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min Dusdpfxjy Aa H Nj Affsr taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: excellent (used), Drilling capacity -18 mm Spindle taper FEHLMANN Spindle speeds 135-4500 rpm Throat 225 mm Cross table 530 x 255 mm Digital read-out Dsdjlyrcmjpfx Affour Accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2013, x-travel 350 mm y-travel 260 mm w-axis 450 mm z-axis 110 mm tool taper SF 32 Quickchange-System turning speed range - stepless 50-6300 U/min table surface area 770 x 320 mm table load 0,235 t feed range - table manuell mm/min feed for quill 1: manuell mm/U total power requirement 4,0 kW weight of the machine ca. 0,9 t dimensions of the machine ca. BTH 1,50 x 1,35 x 2,10 m A very well-maintained machine from a toolmaking/training workshop Only 152 operating hours Infinitely variable electronic spindle speed 50-6,300 rpm (with 5 memory keys) Power 2.9 kW (100%), 40 Nm max. Tapping right/left Adjustable stop for quill depth Precision height adjustment with fitted column wedge Includes machine base with integrated tool cabinet Fine depth adjustment via handwheel Coordinate table with electric feed KS323D Heidenhain POSITIP 880 digital position display Swivelling tool tray for SF 32 tools Includes 50 tool holders with various tools, arbors, etc. Includes Heidenhain Positip 880 digital display Includes Heidenhain touch probe Includes work light Coolant pump incl. documentation Dujdpfx Aoyx Irreffor

Condition: new, Year of construction: 2023, machine/vehicle number: MR005217, Unique 3-axis controlled machine for horizontal and vertical drilling in on sheet metal and solid wood for furniture and interior construction. Machine easy to set via touch screen display, programs easy to call up.Machine is equipped with the following options: - Reference pin for row drilling - Additional pneumatic clamping units - Reference tool for setting clap stops Technical specifications: - Maximum panel thickness : 60 mm - Number of drilling spindles total : 21 pieces - Number of drilling spindles counterclockwise : 10 piece - Number of drilling spindles clockwise : 11 pieces - Spacing between drilling spindles : 32 mm - Total distance first and last spindle : 640 mm - Maximum drilling diameter : 40 mm Duodpfjugu U Ssx Affjr - Maximum drilling depth : 65 mm - Maximum drilling height : 55 mm - Engine power : 2 hp - Serial number : 1622300606

Condition: excellent (used), 4-SIDES LINE of Sizing-Edge Banding and Drilling, composed of the following machines: A) Loader (portal/bridge) double pick-up station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima/N/II/230/A/R3 (mm 1300) C) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. Duedpeyyb Sujfx Affer D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II /740 / B / R3 + (mm 3300) With KFA 30 (multi-profile copying Unit for fine-trimmimng and corner rounding) E) Drilling machinee "IMA" Mod. I-Magic (with 2 horizontal units + 4 bottom vertical unitsi) F) Motorized rollers conveyor "IMA" G) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. H) Stacker (portal/bridge) double stacking station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, Arm length 1800 mm, drilling capacity 80 mm, weight 7000 kg Dsdpfeyzq Dpsx Affour

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 35 mm Dodpfx Ajwp Tdzoffjur throat 300 mm bore stroke 150 mm thread capacity 27 M spindle taper MT 4 MK column diameter 125 mm bore spindle turning speed range 132-1852 U/min table-size 420x400 mm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 5309.85 € 102.48 € 18 mm MK 2 240 mm 30 - 3000 U/min 0.75 kW M12 (steigungsabhängig) 705 mm 355 mm 1825 mm 195 kg manuell mm/U Dodpfxoynmz Aj Affeur 82 mm 180 - 870 mm 340 x 280 mm 100 mm Drilling capacity / normal drilling capacity 18/20 (in E335/ST60) Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Manual feed EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, Year of construction: 2025, neu 2025 030161 prompt, Zwischenverkauf v Deutschland 7350.17 € 141.86 € 1 23 mm MK 2 260 mm 20 - 2000 U/min 1.5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Gewindeschneideinrichtung Dsdpfx Afexcg Ecsfour Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, Year of construction: 2025, neu 2025 030140 prompt, Zwischenverkauf v Deutschland 13429.36 € 257.84 € 1 30 mm MK 3 280 mm Stufe 1: 125 - 4000; Stuf U/min 0,9 / 1,45 kW kW M20 820 mm 520 mm 1900 mm 320 kg 0 - 300 mm/U 240 - 790 mm 420 x 340 mm 125 mm Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off; programmable; easy operation Drilling cross with pushbutton for feed on/off switching Optional transparent or black protective hood (stock machine transparent) LED lighting as standard OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm Dedsxcg D Ejpfx Affour

Condition: good (used), Year of construction: 2017, functionality: fully functional, CMS Brembana Vertec – Vertical CNC Glass Milling & Drilling Machine Available from Week 17 We offer a well-maintained CMS Brembana Vertec milling and drilling machine, designed for high-precision vertical processing of glass. This machine is ideal for companies operating in architectural, interior, or technical glass sectors, requiring milling, drilling, and edge processing in a single setup. Key Features - Vertical CNC machining centre for glass - Processing direction: left to right - Suitable for milling, drilling, countersinking, and edge processing - Compact footprint with high productivity - Front and rear tool magazines (9 positions each) - Automatic tool changer - Integrated lubrication and cooling system - CNC control system with user-friendly interface - Robust industrial build quality (CMS Italy) Working Range - Max glass length: 3200 mm - Max glass height: 2200 mm - Min glass length: 420 mm - Min glass height: 180 mm Technical Information - Manufacturer: CMS (C.M.S. S.p.A., Italy) - Model: Brembana Vertec Mill - Voltage: 400V / 50-60Hz - Phases: 3 + N - Full load current: 31A - Short-circuit rating: 10kA Duodpeyzf Rdefx Affsr - Machine type: Vertical glass processing centre Condition - Machine is in good working condition - Regularly maintained - Can be inspected under power by appointment Included - Tool holders and selected tooling (as shown) - Spare parts cabinet (optional / negotiable) - Documentation (if available) Availability - Available from Week 17 - Location: Netherlands Additional Information This machine provides a reliable solution for workshops seeking to improve efficiency in glass processing with a vertical setup. Suitable for both small series and serial production. We also have videos of the machine in operation. Please inquire for further information.

Condition: excellent (used), Column Drilling Machine Manufacturer: WEBO Model: V 5 Morse taper: MK 3 Clamping table: 470 x 380 mm Max. installation dimension, table to spindle: 900 mm Throat depth: 300 mm Infinitely variable speed, min. 125 max. 1080 rpm 3 automatic feeds: 0.1 - 0.2 - 0.3 mm/rev Quill stroke: 170 mm 380 Volt 1.5 kW 3.5 A Accessories: Drill chuck 3-16 mm Coolant system The machine is in very good condition Transport dimensions: Length 900 mm Width 700 mm Height 2260 mm Weight 630 kg Dsdpfoywhu Dex Affeur