Used Directional Drilling for sale (8,181)

Condition: new, Year of construction: 2024, functionality: fully functional, Thrust press system Push and pull force: 24/30 t Hydraulic station 50 m boom Iedpjuy N H Ejfx Agzsik Expanders: 80/132/160/200 mm Without locating device Price: €25,000.00 net Dry drilling: no bentonite used, no bentonite disposal

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Iedpfx Aewuz Dgjgzsik Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Iodsrtrx Rjpfx Agzsik Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 Ijdpfxew Nytns Agzjik CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 Ijdsdkx Anspfx Agzoik - illumination

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm Isdpfsv S Iqcjx Agzoik total power requirement 4 kW

Condition: good (used), Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine -Spindle mount: B13 -Table size: 300 x 1100 mm -Protrusion: 150/180 mm Ijdpfx Asb A Ikiogzoik -Spindle stroke: 50/70 mm -Weight: approx. 200 kg

Condition: used, machine/vehicle number: 008321, X axis working area: 4200 mm Y axis working area: 1350 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Iiodpjx A Tdljfx Agzsk Maximum edge height: 60 mm Total number of drilling spindles: 18 Total number of tool changer positions: 22

Condition: used, Year of construction: 2006, total width: 1,100 mm, total length: 3,100 mm, total height: 1,700 mm, - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 466 - Main motor power [kW]: 1.1 - Number of spindles [pcs]: 3 - Max. height adjustable [mm]: 120 - Table length [mm]: 3100 - Table width [mm]: 700 - Voltage [V]: 400 - Current consumption [A]: 2.8 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3100mm x 1100mm x 1700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iisdpjx Ig H Tofx Agzjk Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 180 mm spindle turning speed range 25-640 U/min column diameter 180 mm table-size Ø ca. 560 mm surface area Ø 445 mm feeds 0,1; 0,2; 0,3 mm/U spindle taper MT 4 weight of the machine ca. 1 t dimensions ca. 650 x 1000 x 2100 mm with thread cutting device foot switch Iiodpfx Ajx Iwgqegzok With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds

Condition: used, Year of construction: 1960, arm length 1600 mm tool adaptor ja fabric-no. 9787 weight 4,6 t with drill cube Ijdpfsx Ik Unex Agzjik

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 Iijdpfsvtm Ayjx Agzok pneumatic hold-down device, pressing device, stop rulers

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Specially designed for staircase construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Inclined doweling and baluster drilling can be easily performed using the swiveling drilling unit. • Reversible pole motor, two speeds • Motor power 1.0 / 1.5 kW, 1,400 and 2,800 rpm • Convenient handle switch for starting the motor • With Röhm two-jaw chuck 1 – 20 mm • Linear laser for precise positioning of the workpiece • Drilling unit swivels 65 degrees to the left and right • Pneumatic adjustment of working height: doweling on two levels without repositioning • Desired drilling heights can be set for each drilling level using a digital counter, switching is pneumatic from the front • Cross adjustment 340 mm, continuously variable or in 12 mm increments using a detent rail • Pneumatic clamping possible at any position, operable from the front • Maximum height adjustment approx. 100 mm above table height • Drilling stroke approx. 200 mm • 2 pneumatic workpiece clamps, 1 clamping column can be repositioned to the front • 2 swiveling workpiece supports • Extraction funnel • Center stop + 1 side stop • Fixed mitre stop • Length stop as a round bar Iodpfx Aoxmatnjgzeik • Set of drill bits • Operating manual • CE marking • The machine has been partially repainted due to existing paint splashes. • Pneumatic hoses have been replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse; see "further offers from this seller."

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm No of Top Units: 2 Iodpeg E Th Ssfx Agzsik Lateral horizontal groups: yes

Condition: used, Year of construction: 1973, total height: 2,700 mm, total width: 720 mm, total length: 2,300 mm, Empty weight: 3.000 kg - Year: 1973 - Documentation available: Yes - CE certificate present: No - Serial number: 95361 - Control: Conventional - Motor power: 3.0kW - Drilling depth: 330mm - Spindle speed max.: 1120rpm - Model: iaalboormachine - Tool holder: MK4 - Table width: 600mm - Table length: 750mm - Drilling capacity: 40mm - Travel X: 1000mm - Spindle diameter: 5mm - Travel Z: 900mm - Max. reach: 1300mm - Spindle speed min.: 28rpm Iisdpfx Aex Igczjgzek - Transport dimensions: 2300mm x 720mm x 2700mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, bore capacity in steel (diameter) 40 mm continious capacity 25 mm throat 315 mm bore stroke 200 mm bore depth 280 mm spindle taper MT 4 feed range 0,1-1,5 U/min column diameter ca. 230 mm number of feeds 9 table-size 700 x 600 mm surface area 450 x 560 mm distance spindle/base plate 1100 mm dimensions ca. 1000 x 700 x 2400 mm total power requirement 2,6 kW weight of the machine ca. 1,1 t Iodpfxex Iwgkj Agzoik emergency stop switch renewed

Condition: good (used), Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) Iodpfxeb A Hd Ho Agzsik -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer is an equipment package. The following items and options are already included in the price: - OPTImill MB 4 Optimum precision drilling and milling machine - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM Iisdpeu R Tftefx Agzjk - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: used, bore capacity in steel (diameter) 40 mm throat 385 mm bore stroke 200 mm spindle taper MT 4 Isdpsx H Ak Ssfx Agzoik turning speed range 61-1169 U/min table: 470 x 560 mm weight of the machine ca. 700 kg dimensions of the machine ca. 900x800x2000 mm

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Iodpfxswuz Eke Agzoik Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, Year of construction: 1969, arm length 1600 mm taper MK 5 Würfel Iiodjx H Txtspfx Agzok

Condition: good (used), Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm Iodob A Idyjpfx Agzeik -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg

Condition: used, GANNOMAT Compact 30 hole drilling machine - used - pneumatic clamps, foot control, Isdpfx Aswmmt Regzoik 2 drilling beams with 15 spindles each ----- Technical specifications ----- Number of spindles: 30, Drill spindle spacing: 32 mm, Motor power: 2 x 0.75 kW, Voltage: 400 volts, Pneumatic connection: 6 bar, Dimensions without stop ruler: 850 x 1,100 mm, Weight: 240

Condition: used, machine/vehicle number: 008134, X axis working area: 5780 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 28 Iiodjw Idgiepfx Agzsk

Condition: good (used), Proportional pressure control directional control valves, solenoid valves, pneumatic valves, air valves, pressure valves, valve blocks, control blocks -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm Isdpfx Agsb A R Hpszeik -Weight: 2 kg