Used Directional Drilling for sale (8,340)

Condition: good (used), Year of construction: 2018, Flame-cutting and drilling system Plate processing center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool changer Tool holder capacity: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point transverse conveyor Number of carriages: 2 clamps NC infeed carriage, positioned on the side 4 clamping jaws (2+2) Hfedpsvzrczjfx Ahajh 3 short-stroke transverse conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with a lowerable discharge table with a chute leading into a material collection container for unloading small parts. Filter unit including piping High-performance for use with carbide tools. For drilling, tapping, marking, milling, and plasma cutting of flat steel and sheets. Software options for milling and scoring LANTEK license 3626ä Availability: Immediate!

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Hfodpsza Hzgsfx Ahash Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation - Electric foot switch for switching the direction of rotation to left for thread cutting interruption - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) - Coolant system - Control cabinet on the back of the machine - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Good condition

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kaltenbach KDS 615 / KBS 750 CNC Drilling / Sawing Line – Year 2010. 3 Spindles. Automatic Tool Changer. Hard Stamping. Gripper feed. 16 metres Infeed. 16 metres Outfeed. Infeed and Outfeed Cross Transfers. KALTENBACH KDS 615 3 axes CNC drilling machine KDS 615: Hfodpfxezcqmxj Ahaoh Drilling spindle speed range 100 - 2500 rpm Drilling spindle drive power x 15 kW Total drill length. 160 - 460 mm Drill feed range 40 - 1000 mm/min Work piece width: 620 mm Workpiece height: 440 mm Drill diameter: 10 - 40 mm Number of drill axes: 3 KALTENBACH KBS750 Working range 90° 750 x 500 mm Working range 60° 650 x 500 mm Working range 45° 520 x 500 mm Working range 30° 390 x 500 mm Drive power5,5 kW

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Hjdpfx Ahopr Uvreajfh

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Hfsdpfxeyyxkho Ahaeh

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, MACHINING CAPABILITIES: - Height (thickness) of useful Z-axis travel: 225 mm - Length of useful X-axis milling travel: 3860 mm - Width of useful Y-axis milling travel: 1930 mm - Work area: X = 3090 mm Hsdpfx Ahozcvvreasfh Y = 1530 mm Z = 85 mm, depending on the clamping system, see machine technical diagrams. - Maximum travel speeds: X-axis: 25 m/min Y-axis: 25 m/min Z-axis: 15 m/min MACHINE COMPOSITION: - Vacuum table with grooved length x width: mm Grid pattern with 30 x 30 mm grid spacing Matrix table with fine grid, axis dimensions 30x30 mm (instead of 60x60 mm grid) - 2 Vacuum pumps 250 m3/h - Chip evacuation mat - X-axis movement via pinion and rack, Y & Z-axis movements via screw and sleeves (high-quality precision linear guides with automatic lubrication) • Milling/routing unit 10 kW - Tool holder connection type: HSK F63 - Variable speed 1000–24,000 RPM, controlled by a frequency converter Rotation direction: right/left The routing spindle is connected to the Z-axis mounting plate via linear guides and moves along 2 vertical linear guides. The tool clamping is done using an HSK F63 cone. Tool retention is controlled by 3 sensors. This ensures safe operation. The tool clamping cleaning is pneumatic. Drive: HF 3-phase motor controlled by a frequency converter Bearing: ceramic Spindle cooling: by air - Extraction hood around the perimeter - On-board tool magazine, 11 positions - Maximum tool diameter: 100 mm - Maximum tool height: 153 mm - Distance between clamping jaws: 110 mm Please consult the machine configuration for more information on specifications. • DH 16 4H 2S Drilling unit: Unit with 12 vertical heads and 4 horizontal heads; 2 slotting saws; 1 in the X direction and 1 in the Y direction Vertical drilling system with 12 spindles. 7 spindles in the X direction and 5 spindles in the Y direction. Independent operation of each spindle is possible. Continuous speed up to 6000 RPM, horizontal drilling system with 4 spindles. 1 double spindle in the X direction, 1 double spindle in the Y direction. • Control panel: - Windows PC - Programs (Software): F4 Design, F4 Nest OTHER FEATURES: - Total electrical supply: 400V. 3Ph.+N+T 50Hz IN 56-63 A - Installed power: 26kW - Pneumatic supply: 8 Bars - Average consumption: 350 Nl/min - Centralized extraction ports - CE standard marking Lockable disconnector switch, emergency stops

Condition: good (used), Year of construction: 2000, machine/vehicle number: 152362081, functionality: fully functional, throat depth: 2,700 mm, spindle diameter: 110 mm, sheet thickness steel (max.): 100 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, Radial drilling machine MAS U 1000 Year of construction 2000 Conventional / digital control With face plate 1,000 mm and tool package Hodporwxpfefx Ahasfh Viewing is possible at any time by arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Radial drilling machine MAS | MAS1000 | U1000

Condition: used, Year of construction: 1993, Number of drilling spindles: 8 pcs Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Hsdjzdu Hkopfx Ahasfh Operation: Foot pedal Drilling direction: from above, fixed Number of material clamps: 2 pcs Type of material clamping: pneumatic Design: stationary Location:

Condition: used, machine/vehicle number: 007841, X axis working area: 4200 mm Y axis working area: 1200 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 4 axes Maximum edge height: 64 mm Hfedpfxsyg Ef Dj Ahaeh Total number of tool changer positions: 18

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings Hfodpfx Aheza Syusaoh - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Hfodpjx E Ingsfx Ahaoh Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: used, The KNUTH KSR 50 VT is a high-performance radial drilling machine that belongs to the Radial Drilling Machines category. Designed with "Tool to the workpiece" in mind, this machine offers exceptional flexibility with clamping surfaces on three sides to accommodate various applications. Built from thick-walled high-grade cast iron, the KSR 50 VT features a robust structure, ensuring durability and precision during operation. The electronically controlled servo quill feed and large touchscreen display enhance user experience, allowing for seamless adjustments of machining parameters. Ideal for single and small series production, it shines in maintenance activities and tool as well as steel construction. With a drilling capacity of 50 mm and a table setup area of 1,200 x 505 mm, the KSR 50 VT is versatile enough for diverse tasks. Buy now to elevate your drilling capabilities with this advanced radial drilling machine. Hfjdpfoyfl Uvsx Ahash

Condition: used, total width: 1,000 mm, total length: 1,900 mm, total height: 1,900 mm, Colour: Green Empty weight: 1.500 kg Price: On request - Documentation available: Yes - CE certificate present: No Hodpfxsyywdge Ahasfh - Drive system: Conventional - Number of drills [pcs]: 4 - Power [kW]: 4.4 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 500 - Drilling depth [mm]: 120 - Drilling capacity [mm]: 22 - Reach [mm]: 370 - Main spindle power [kW]: 1.0 - Min. spindle speed [rpm]: 345 - Max. spindle speed [rpm]: 3600 - Transport dimensions: 1900mm x 1000mm x 1900mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Manufacturer: Maxion Model: Ecomax 14 Condition: Used Stock number: 00199 Max. drilling capacity: 15 mm Spindle taper (MT): MT2 Min. speed: 420 rpm Max. speed: 2100 rpm Hfedpeyf Hpuefx Ahaeh Throat: 180 mm Drilling depth: 70 mm Weight: 63 kg Connection voltage: 400 V DC

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Hfodpfx Asyxy S Rohash Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: used, bore capacity in steel (diameter) . mm throat . mm bore stroke . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Hodpfezc Rt Eox Ahaefh We look forward to your visit. Your Markus Hirsch Team

Condition: used, bore capacity in steel (diameter) . mm throat . mm bore stroke . mm Hfedpezc Rtrofx Ahaoh The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, bore capacity in steel (diameter) . mm throat . mm bore stroke . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Hfsdpfezc Rr Uex Ahash

Condition: used, bore capacity in steel (diameter) . mm throat . mm bore stroke . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Hedpjzc Rr Isfx Ahaofh About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1995, STC-Ref: G-791-0199 IRAM-12 ,Year: 1995 Hfedjzc Un Tjpfx Ahash - paper drilling machine 4 spindles - additional accessories (drillers) --> available: 07/2026

Condition: excellent (used), functionality: fully functional, Torsion-resistant gantry construction for precision and service life Hfjdpeyx Axaofx Ahajh – Foot release – Stack height 60 mm – Insertion depth approx. 100 mm behind the drills – Insertion width 480 mm – Drill length compensation – Hole diameter 2 – 20 mm – 1 to 4 drilling heads – Automatic table lift

Condition: ready for operation (used), Column drill press GILLARDON GB 25 -Drilling capacity / steel 32 mm -Drilling capacity / cast iron 35 mm -Speed range - stepless 60 - 1800 rpm -Direction of rotation / right - left -Morse taper MK 3 -Overhang 290 mm -Quill travel 175 mm -Table area 450x360 mm -Table height adjustment by means of hand crank -Threading device -Coolant system -Drill chuck Hfsdpfxszdb H Se Ahaeh -Analog speed display -Foot switch -Emergency stop -Documentation Dimensions: L x W x H 0.7 x 0.7 x 2 meters / Weight: 490 kg Errors and omissions excepted.

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 Hjdpjvtm Ayofx Ahasfh pneumatic hold-down device, pressing device, stop rulers

Condition: new, Drilling and Milling Machine OPTIMUM OPTImill MB 4 - Exhibition Machine - This offer is for an equipment package. The following items and options are already included in the price: - Drilling and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine - Hfodpfx Ahsu R Tftjajh

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 59978, functionality: fully functional, BIESSE SKIPPER 100 CNC Drilling and Machining Center For sale: BIESSE SKIPPER 100 high-performance CNC through-feed machining center designed for drilling, routing and grooving operations in furniture production and panel processing. The machine offers excellent productivity, high machining accuracy and compact industrial construction. Technical Specifications Manufacturer: BIESSE Model: SKIPPER 100 Axes X-axis travel: 3,000 mm Y-axis travel: 1,000 mm Z-axis travel: 60 mm Workpiece Dimensions Length: 90 – 3,000 mm Width: 70 – 1,000 mm Thickness: 8 – 60 mm Spindle Unit HSK electrospindle Spindle speed: 6,000 – 18,000 rpm Spindle power: 3.5 kW Total installed power: approx. 20 kW Drilling Units Per operating unit: 29 vertical drilling spindles 8 horizontal drilling spindles along X-axis 2 horizontal drilling spindles along Y-axis Total: 78 independent spindles Upper and lower machining units Equipment Automatic panel size detection Electronic thickness control Central automatic lubrication BiesseWorks software Roller loading table Unloading conveyor Dust extraction connections Safety enclosure Machine Dimensions Overall length: 7,290 mm Hfsdpezatrrjfx Ahaeh Overall width: 4,400 mm Height: approx. 2,000 mm Weight: approx. 2,700 kg The machine is in good working condition and can be inspected under power by appointment. Photos, videos and additional technical information available upon request.