Used Auto Label Dispenser for sale (7,879)

Condition: used, Year of construction: 2023, operating hours: 50 h, functionality: fully functional, total height: 1,800 mm, input voltage: 400 V, total width: 2,830 mm, total length: 2,300 mm, overall weight: 2,500 kg, warranty duration: 3 months, working width: 1,950 mm, operating pressure: 6 bar, Equipment: documentation/manual, KOLBUS AUTOBOX BX200 + TF200 Magazine Feeder | 2023 | Like New Produce custom-sized corrugated boxes in-house – from individual boxes to short production runs. For sale: a KOLBUS AUTOBOX BX200, manufactured in 2023, in like-new condition and fully operational. Equipped with a TF200 magazine feeder, including a transport trolley to support corrugated board feeding. Current counter reading: approximately 3,200. The Copilot touchscreen control system provides fully automatic, tool-free machine setup. Stored jobs can be recalled for repeat orders, while pre-installed FEFCO styles support flexible production of different box designs. FEATURES AND EQUIPMENT • Copilot control system with touchscreen • Production mode selection and job memory • Fully automatic, tool-free format setup • Automatic cross-cutting and longitudinal slitting knife adjustment • Fully automatic setting of pneumatically adjustable creasing and slotting tools • Two manually adjustable creasing wheels for additional crease lines • Fine adjustment using +/– buttons during production • Machine and material flow fault indication • Operator-guided troubleshooting • Servo-controlled drive technology • Various pre-installed FEFCO box styles • Equipped with 400 mm slotting knives Fjdpfx Aeyaa Rnem Esgi • Slot width: 7 mm • Suitable for single-wall and double-wall corrugated board • TF200 magazine feeder with transport trolley • Documentation and operating manual available • Remote service possible FORMAT RANGE AND PERFORMANCE • Sheet width: 120–1,950 mm • Blank length: 500–8,000 mm • Board thickness: 1–10 mm • Minimum slot spacing: 100 mm • Mechanical speed: up to 80 m/min Actual production output depends on board quality, box dimensions, design and operating conditions. TECHNICAL DATA – BX200 BOXMAKER ONLY • Dimensions (L × W × H): 1,770 × 2,830 × 1,800 mm • Weight: approximately 2,000 kg • Electrical supply: 3-phase, 400 V / N / PE, 50 Hz • Compressed air supply: 6 bar • Compressed air consumption: 20 Nm³/h Dimensions and weight above refer to the boxmaker only, excluding the magazine feeder and ancillary equipment. CONDITION AND LOCATION • Year of manufacture: 2023 • Condition: like new, fully operational • Current counter reading: approximately 3,200 • Location: Jena, Germany INSTALLATION, TRAINING, SERVICE AND SPARE PARTS Installation, commissioning, operator training and technical service can be offered separately through former KOLBUS AUTOBOX employees with extensive machine and application experience. Spare parts support and supply are also available through us. Please contact us for an individual quotation covering the machine and your required services. ALTERNATIVE MACHINE AVAILABLE A second machine, manufactured in 2019, is also available. This machine will be supplied fully refurbished and updated to the latest software version. Further information and equipment details are available on request. CONTACT Tobias Greiling CCSTG – Corrugated Converting Solutions Phone: +49 175 9733507 Subject to prior sale. Errors and changes reserved.

Condition: new, Input module (terminal) for connecting strain gauge sensors (load cells). Fgsds Afdwropfx Am Eoi

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as shown in the photo, used, display film damaged (see photo 2), otherwise shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Fgsdpfxsi D Ukuj Am Esi

Year of construction: 2026, condition: new, The FleXlabeller is the fastest semi-automatic bottle labeller for factories, small producers and users of handcrafted products! With the FleXlabeller PE-ET, you can apply labels to almost all types of cylindrical products, such as various wine and champagne bottles, brandy and beer bottles, cans and pickles, at lightning speed! It is designed to handle almost any cylindrical product from 50 mm to 120 mm. Dimensions: Width: 38 cm Length: 65 cm Height: 65 cm Weight: 23 kg Operation: electric Capacity: 10-20 products/min Label features: Label winding: external (out) Minimum tape width: 20 mm Max. tape width: 165 mm Min. label length: 20 mm Max. label length: 200 mm Inside diameter of reel: 76 mm Max. outer diameter of label roll: 250 mm Cylindrical form reception: Yes Min. cylinder diameter: 50 mm Max. cylinder diameter: 120 mm Fgedsfkq Dmopfx Am Eji Reception of square shapes: No Extension options: Manual label numbering Automatic label sorter Automatic label applicator Automatic label applicator Automatic label applicator Automatic label applicator Key features: Recommended for products with a bottle diameter of 50-120 mm The fastest semi-automatic labeller, motorised/sensorised operation Helps labelling of small to medium volume cylindrical products Enables positioned and accurate application of roll labels Extremely easy to use and set-up Optional manual or automatic label sorter.

Condition: ready for operation (used), soft jaws Manufacturer: SMW Autolok Fedpjftzz Sefx Am Eogi Type: 0137643 Weight: 9 kg per piece

Condition: as good as new (ex-display), Top jaw Manufacturer: SMW Autolok Type: 080 954 WAKS 500 10 16 Mn Cr.5 Fedpfsftz Adox Am Ejgi Weight per piece: 4.6 kg

Condition: excellent (used), 4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN Fedsfpif Sepfx Am Eogi -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

Condition: refurbished (used), FORTUNA AUTOMAT A3 weight range: 0.35 to 85 grams Circular knitting machine, single-needle version only Stainless steel blades, new Fgsdogg S Dhspfx Am Eei Stainless steel protection, front and side New control cable, oil – everything is new As good as new, even better... Completely overhauled, like new with 3 working plates 16 Ah connection

Year of construction: 2002, condition: repair required (used), ULMA, year of manufacture 2002 • Extended infeed conveyors. • Centralized lubrication. • Sanitary clean out the tray. • Gravity and motorized exit conveyors: inline, 90º, 180º, ... • Additional 1 meter sealing device. • Automatic image centring device for printed films. • Printed band attachment. • Transparent tray detection. • Sealer Cooler. • Others (Ask). Fsdpfx Asg H Tqujm Eogi A high-performance wrapping machine, specially developed for the wrapping of trays in central processing facilities (meat, poultry, fish, vegetables, fruits) and high volume supermarkets. A large range of models for customer requirements. Its strength, reliability, ease of operation, and automatic size change, make it the most automatic size change, make it the most productive and versatile machine available, possibility to wrap with several kinds of film: PVC, polyethene and polyolefines. TECHNICAL FEATURES (Depend on the model) • 1 or 2 film rolls with automatic roll selection. • Automatic recognition of the tray dimensions or manual. • Automatic or manual selection of film length and width. • Universal elevator. • Self-diagnostic capability. • Film tension control. • Forward and reserve jog capability. • 4-way film stretch with lateral pre-stretch. • Temperature control for the sealing belt. • Oversize package detector. • Mechanical torque limiter. • Guards and safety devices according to international standards. • Heavy duty construction with corrosion-resistant material. Power supply: 380 V, 12 kW Bizerba GV labeller, manufactured in 2002 Bizerba 18A scale with Bizerba AB display. Automatic labelling and weighing system for products packaged in the food area. Electric power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of tape width 300 mm. External dimensions of the machine: (mm) 1860 long x 720 wide x 1300 high. Compressed air supply of the blower label: air pressure: 6 bar, air flow: min. 100 l / min, compressed air. without oil, filtered at 10 µm, Label dimensions: 100x100. The separation between labels: from 2 to 20 mm. Thermal print head - resolution of 8.0 points Weighing from 1gr to 6000gr. Maximum labelling capacity 60 packages/minute. Equipment prepared for PC connection, Bizerba software allows the realization and design of labels adapted to your needs. Ability to print all types of barcodes, customer logos, etc. The equipment was reviewed, rebuilt, and guaranteed with the following maintenance: change of conveyor belts, thermal print head, and engine belts. High-quality equipment and great performance in terms of speed and reliability. The label and the scale are mounted on an output conveyor belt. Weighs at least 40 g up to a maximum of 18 kg For the Romanian companies, there is the possibility of selling in instalments. Price upon request, FCA: Oradea/Romania We sell this line refurbished Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Pallet stackers or dispensers are used for automatically stacking and destacking of empty pallets to a complete pile. Those empty pallets can be loaded by any pallet truck or forklift. (similar to green palomat) Type PD15 In very good condition Fjdpfxsg Du Epe Am Esgi Capacity: 15 europallets Dimension pallet : 1200 *800 mm Dimension machine : 1.600x1.370x2.170 mm Control: electrical on 220V (single phase) no need for compressed air

Condition: excellent (used), Year of construction: 1990, I sell the press for glued massive solid wood panels Maweg Hildebrand Euro-Auto Material size 2800X2000 x 120mm Fedeg Dvu Tepfx Am Ejgi 2pcs. vertical pistons hydraulic. 2pcs. horizontal pistons hydraulic. Very good condition. Avialable immediately.

Condition: excellent (used), Labeling machine for computer terminals Labels applied from above and below Fsdpfsghwivsx Am Ejgi Optional: Additional control modules Programmable with best-before date printing We look forward to your call. Connection: 16 Ah

Year of construction: 2010, condition: used, Mettler Toledo PAS 3012 check-weigher with labeling machine. Fgjdpfxeivnqcs Am Eoi The labeling had can be electrically moved in all directions for an accurate positioning of the labels. - Max. weight: 6KG - Min. weight: 0.020KG - E: 0,001KG - Rated for 70 packs per minute

Condition: good (used), Manufacturer: Rhein-Nadel Automatisation GmbH Type: SRC-N 630-1 R Vibration frequency: 50 Hz/3000 min -1 Electrical power: 220 V Drum diameter: 900mm Fgedpfx Amogth U Is Esi Adjustable vibration

Year of construction: 2022, condition: new, machine/vehicle number: AM00222071301-01-01, Manufacturer:AUTOVAK Model: M320 Main material:Stainless steel Dimensions:3,550 mm x 1,050 mm x 2,300 mm Fsdpfx Ajpfcd Aom Ejgi Weight: ca. 1,200 kg Power supply: 3 x 400 V + N + E / 50/60 Hz Compressed air supply: Pressure min. 6 bar, 500 L/min (without printer) Width of top web:305 - 310 mm Roll core diameter: 3" Roll diameter: 400 mm Width of bottom film:322 +/- 1 mm Roll core diameter: 3" Roll diameter: 300 mm Cutting size: 130 x 100 mm Forming depth:15 mm Loading area length:450 mm Installed power: 15 kW Noise level:Less than 72dB Production speed: 3 ~ 10 cycles/min Equipment: Forming tool for 3 blisters per stroke each with opening aid at one corner; Inner dimensions: 105 mm x 75 mm x 15 mm Condition: Like new (demo model)

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AM00222090802-01-03, - Function: Heat sealing of blister boxes - Main material of the machine: Stainless steel 304, aluminum alloy - Dimension: 1000mm x 715mm x 450mm - Weight: About 150 kg (excluding mould) - Power supply: 220 V 50 / 60 Hz single phase 3,5 KW - Compressed air supply: Pressure 5 bar - 8 bar, approx. 18 L / min - Seal size: 300mm x 400mm - Packing depth: Deepest 100mm - Production speed: Up to 12 cycles per minute depending on operator skill - Heat seal pressure: 300-1500kg adjustable Fedpfxjpfcy Ee Am Esgi Autovak is an international company with research, development and manufacturing facilities in Suzhou, China, and sales and service offices in the United States, Germany and Malaysia. The company has over 20 years of experience in the packaging of medical devices. From doing OEM for European packaging machine manufacturers to produce self-designed machinery and equipment with independent intellectual property rights and own brands, Autovak has accumulated a lot of know-how in the field of medical device packaging and online printing.

Condition: good (used), PA Eclipse SL6 high throughput tray sealer from ready meals factory. Fedepg Er Nopfx Am Eegi

Condition: good (used), For sale: - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS Fgodoua Dqiepfx Am Eei - EPS silos - EPS crusher - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 6296075, Technical specifications as per original manufacturer: Fodpfetql Hdox Am Ejgi Diameter range: 57 mm - 110 mm Label height: 25 mm - 235 mm Label length: 190 mm - 430 mm Production capacity: up to 300 c.p.m. Tooling for approx.: 73 mm Labels: wrap-around labels

Condition: new, Year of construction: 2026, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Product alignment for square bottles Top belt guide for square and oval products Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc. Fjdpfju Ia E Ijx Am Ejgi

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Log turner, infeed-outfeed conveyors, heavy duty construction Equipment from 2019 Fjdeu N Ac Sepfx Am Eegi

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors Fgedpfx Amjx Hh A Hs Eei _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Condition: used, Year of construction: 2003, Labelling machine for wrap-around belly labelling of 0.5 and 1.0 l PET bottles. The paper labels are glued to the bottle with hot glue. Additional title: wrap-around labelling Capacity: 24000 b/h Current: 18 A Voltage: 400 V Frequency: 50 Hz Formats: PET bottles, 0,5 l, 1,0 l, 1,5 l Running direction: left -> right Fgedpfjx T Arpsx Am Esi Operation / Control: Simatic S 7-300 Material: stainless steel housing Position: free standing Base construction: rectangular, enclosed machine, on spherical feet Features: housing with viewing window, labelling module for wrap-around paper labels, Robatech hot melt melter Periphery: Leibinger Jet 3, best-before date printer

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063528, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min Fgedpfexx Si Esx Am Eei - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: used, EA Elektro-Automatik EA-EL 9080-170 B Laboratory Power Supply EA-EL9080-170B | EA-EL 9080 Fgodsyplqlspfx Am Eoi Item condition: Used - 6.3A - 2400W Price: 7.00 You can find more laboratory power supplies – new and used – in our shop! International shipping costs available upon request!