Used Automatic Feeder for sale (23,536)

Year of construction: 2025, condition: new, machine/vehicle number: KVK 3 Automatik, This automatic stretch wrapper with rotating turntable independently attaches the film to the pallet and cuts it after each wrapping cycle, unlike the semi-automatic KVK 3. Wrapping can conveniently be started by remote control—no need to get off the forklift or bend down to attach the film to the pallet. The machine is also equipped with a pre-stretch system for 250% elongation. This allows you to create up to 3.5 meters of wrapping film on the pallet from just 1 meter on the roll, greatly reducing your material consumption. Furthermore, the pre-stretch system applies minimal tension, so even lightweight goods remain stable and are not pulled from the turntable. At a weight of 700 kg, this model is very stable and engineered to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm diameter turntable and, as standard, can wrap pallets up to 2,400 mm high. Bodpfxoylv Sfo Aftjwi Adjustable turntable and film carriage speeds, along with a potentiometer-controlled power stretch unit, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wraps. Program options include “up only” wrapping, “up & down” (cross-wrapping), and “waterproof” wrapping. Manual operation is also possible if required. If you need to relocate the machine, it can easily be lifted and moved using cut-outs designed for forklift tines. Options: In addition to a matching access ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can also be optionally configured for wrapping heights up to 3,200 mm. This model is our clear recommendation if you are wrapping very lightweight goods or need to stretch-wrap more than approximately 30 pallets per day, with automatic film application and cutting. For further details, please see the technical data sheet attached as a PDF to this listing!

Condition: new, Year of construction: 2025, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Bwjdpjylwmkjfx Aftei Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: new, Year of construction: 2025, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Bwjdpfx Afoylwdvetoi Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 260 kg, total length: 25,080 mm, total width: 15,000 mm, total height: 24,250 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our pallet wrapper "Basic" is a semi-automatic stretch wrapper from Eurapa production, which guarantees absolutely consistent results due to up to 10 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be adjusted to your requirements and saved in the programs. The programs also allow you to set how fast the film carriage and turntable run. Head and foot windings can also be saved for each program. In this way, you can store individual programs for each wrapping pattern to achieve perfect wrapping results every time. With a weight of 260 kg, this model is suitable for loads of up to 1200 kg. Our Basic pallet wrapper has a 1500 mm turntable and can wrap pallets up to 2000 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course, as are adjustable head and foot wraps. If the wrapper needs to be used at a different location in the meantime, it can be easily lifted and moved with a forklift truck via integrated cut-outs. This model is our recommendation if you want a good and affordable pallet wrapper that can be adapted to your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the ordered goods - a partner can do more: he helps you to find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements! Bwedpfeylwbzjx Aftji

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 280 kg, total length: 23,740 mm, total width: 15,000 mm, total height: 20,750 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also supply you with a suitable loading ramp, a photoelectric sensor for black object detection, or the appropriate machine film! About this model: Bwjdjylwakopfx Aftei Our "Starter" pallet wrapper is a semi-automatic stretch wrapper, perfect for those who no longer want to wrap pallets by hand or are seeking an affordable backup unit. Our Vogel Starter is likely the most economical pallet wrapper produced in Europe, without compromising on quality. In contrast to our other pallet wrappers, the range of options on this model is limited, as our aim here was to design a highly standardized pallet wrapper that covers most applications at a cost-effective price. With three programs, you can set both the speed of the film carriage and the turntable, and choose between “cross wrapping” or “up only” wrapping. Top and bottom wraps can also be saved to each program. The brake tension is easily adjusted via the mechanical film brake. Access to the programs can be password-protected, allowing the operator to choose only from the saved settings. This model weighs 280 kg and is rated for loads up to 1200 kg. Our Starter pallet wrappers feature a 1500 mm turntable and can wrap pallets up to 2100 mm high as standard. Automatic pallet detection (using a photoelectric sensor) comes standard, as do adjustable top and bottom wraps. Should the wrapper need to be relocated, it can be easily lifted and moved with a forklift using the integrated fork slots. This model is our recommendation if you want to move away from manual wrapping and are looking for a robust machine made in Europe. About us: Business is about people – that is our conviction! A supplier delivers the goods you order – a partner does more: they help you find the best solution. They support you in achieving your goals! They also stand by your side when problems and challenges arise. That is our philosophy. For over 40 years and now in the 4th generation, we have been the partner to small and medium-sized enterprises when it comes to “stretch wrapping and adhesive bonding.” If you wish, we are happy to advise you on which pallet wrapper from our portfolio best fits your requirements!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 420 kg, total length: 28,650 mm, total width: 15,000 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also offer you a suitable drive-on ramp, a photo cell for black object detection, or the appropriate machine film! About this model: Our Profiline is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby reliably eliminating the “human factor”. The electromagnetic brake allows you to precisely set and store the film tension at each stage (bottom wrap, upward wrap, top wrap, downward wrap) within the programs. Within each program, you can additionally specify the speed of the film carriage and turntable. You can also store head wraps, bottom wraps, and the film overlap at the end of the pallet for each program. This allows you to create individual programs for every packing pattern in order to achieve optimum wrapping results every time. The programs can be password-protected, so the operator can only select from the preset programs. With a weight of 420 kg, this model is designed for loads up to 1200 kg (optionally up to 2000 kg). Our Profiline is equipped with a 1500 mm turntable and can wrap pallets up to 2500 mm in height as standard. Automatic pallet detection (via photo cell) is standard, as are adjustable head and bottom wraps. If the wrapper needs to be relocated, it can be easily lifted and moved using integrated forklift slots. Bedpfjylv U Tex Aftswi This model is our recommendation if you require a professional and robust pallet wrapper for higher volumes, which can be optimally adapted to your needs. Do you need a larger turntable, a taller mast, film pre-stretching, or an automatic film cutting system? With this machine, almost anything is possible! We are happy to configure this machine as a new unit with exactly the options you require. About us: We believe that business is conducted between people! A supplier delivers the goods you ordered—a partner does more: they help you find the best solution, support you in achieving your goals, and assist you in overcoming problems and challenges. This is our conviction. For over 40 years and in the 4th generation, we have been the partner for SMEs in all matters relating to “stretching and adhesive solutions.” On request, we are happy to advise you as to which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2025, overall weight: 280 kg, total length: 23,740 mm, total width: 15,000 mm, total height: 20,750 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also supply you with a suitable loading ramp, a photoelectric sensor for black object detection, or the appropriate machine film! About this model: Our "Starter" pallet wrapper is a semi-automatic stretch wrapper, perfect for those who no longer want to wrap pallets by hand or are seeking an affordable backup unit. Our Vogel Starter is likely the most economical pallet wrapper produced in Europe, without compromising on quality. In contrast to our other pallet wrappers, the range of options on this model is limited, as our aim here was to design a highly standardized pallet wrapper that covers most applications at a cost-effective price. With three programs, you can set both the speed of the film carriage and the turntable, and choose between “cross wrapping” or “up only” wrapping. Top and bottom wraps can also be saved to each program. The brake tension is easily adjusted via the mechanical film brake. Access to the programs can be password-protected, allowing the operator to choose only from the saved settings. This model weighs 280 kg and is rated for loads up to 1200 kg. Our Starter pallet wrappers feature a 1500 mm turntable and can wrap pallets up to 2100 mm high as standard. Automatic pallet detection (using a photoelectric sensor) comes standard, as do adjustable top and bottom wraps. Should the wrapper need to be relocated, it can be easily lifted and moved with a forklift using the integrated fork slots. This model is our recommendation if you want to move away from manual wrapping and are looking for a robust machine made in Europe. About us: Business is about people – that is our conviction! Bedpfx Afoylv Tcjtswi A supplier delivers the goods you order – a partner does more: they help you find the best solution. They support you in achieving your goals! They also stand by your side when problems and challenges arise. That is our philosophy. For over 40 years and now in the 4th generation, we have been the partner to small and medium-sized enterprises when it comes to “stretch wrapping and adhesive bonding.” If you wish, we are happy to advise you on which pallet wrapper from our portfolio best fits your requirements!

Condition: used, Bowl feeder, vibratory feeder, RNA, Used machine Manufacturer: RNA Type: — Overall dimensions: Bodpjyn Rntsfx Aftowi Width: 750 mm Depth: 680 mm Height: 450 mm Electrical data: 230V; 6A; 50Hz Bowl size: 350–640 mm

Condition: excellent (used), Year of construction: 2001, Manufacturer YAMADA DOBY Model Alfa-45H Year 2001 Condition Used Warehouse number 0357 Structure Double column Used press Thrust: 45 tons Thrust points n° 2 Slide stroke 30 mm. Number of strokes/min 150 -1000 Slide adjustment 50 mm. Bwedpfx Ajwiifujftsi Mold light at BDC 260 mm. Mold holder plate size 700 x 500 mm. Slide size 700 x 360 mm. Lateral passage in the shoulder 220 mm. Main motor power 15 kw

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Bedpfx Aexz Ugxsftjwi Shut/Ram height adjustment: 80 mm Working Dimensions: Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine Dimensions: Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 2.2m books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Bsdswu Sptjpfx Aftswi Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm Bjdpfshxvu Eox Aftswi One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm Bjdpfx Afefx Hyfjtjwi - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations Bsdsgd D U Ejpfx Aftswi - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz Bedpfxopu R Nvj Aftjwi - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Bwsdpfx Ajdzqltsftei Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Bwedjkpwuujpfx Aftsi Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch Bwodpodzp U Isfx Aftji - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 27600 € Bwsdpsynnhqefx Aftoi 527.16 € Doppelsäulenführung 5750 x 41 x 1,3 mm 15 - 120 m/min 460 mm 460 mm 520 x 460 mm 585 mm 0.55 kW 4 kW 0.12 kW 3000 mm 1200 mm 1800 mm 1650 kg Roller feed with manually adjustable stop with micro switch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Mechanical upper clamping Pressure adjustment Inverter for stepless blade speed Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 54900 € 1037.61 € Doppelsäulenführung 5400x41x1,3 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 440 mm, quadrat 440 rund 430 mm, quadrat 430 rund 320 mm, quadrat 260 807,5 mm 1.1 kW 4 kW 0.12 kW 2850 mm 2350 mm 2000 mm 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment Bwjdpfjynnhdsx Aftsi proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,--

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 22700 € 435.84 € Doppelsäulenführung 4800x34x1,1 mm 20-100 m/min 380 mm 380 mm 430x380 mm 590 mm 0.55 kW 3 kW 0.12 kW 2900 mm 950 mm 1660 mm 1342 kg blade brush control panel hydraulic vice optical adjustment switch hydromechanical blade tension inverter mechanic top clamping material limit shaft Bsdpfeynng Tox Aftjwi coolant pump saw blade security switch gearbox pressure adjustment 1,2 meter roller table user manual in GERMAN or ENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 72800 € 1375.92 € Doppelsäulenführung 9500x54x1,6 mm 20-100 m/min 1020 mm 1020 mm 1020x1020 mm rund 675 mm, quadrat 675 535 mm 2.2 kW 7.5 kW 0.12 kW 4500 mm 1700 mm 2750 mm 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade Bodpfxoynng Hj Aftswi user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping chip conveyer turn table for turning the machine for mitre cutting roller tables and band saw blades

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 58000 € 1096.2 € Schwenkrahmen 3120 x 27 x 0,9 mm 15 - 101 m/min Bjdpfx Asynncusftjwi 280 mm 240 mm 310 x 240 mm rund 230 mm, quadrat 230 rund 140 mm, quadrat 140 rund 200 mm, quadrat 170 240 mm 835 mm 0.37 kW 1.5 kW 0.12 kW 1.95 Nm 1.95 Nm 5150 mm 3200 mm 1950 mm 5000 x 2200 x 1900 mm 2150 kg CNC control with 7" touchscreen for the following functions: Feed length, workpiece count, and automatic saw frame rotation for frame adjustment Automatic feed 3000 mm / stroke Variable cutting pressure Machine with infinitely variable speed Coolant system Motorized chip brush Chip conveyor Automatic saw blade breakage monitoring Hydraulic vices Recommended max. diameter of solid material in automatic mode: 150 mm Operating manual in German or English OPTIONS: Hydraulic bundle clamping device, micro-spray device, variable clamping pressure, 10" screen, remote maintenance, roller conveyors, feed system, and saw blades available upon request

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 11640 € 223.49 € Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 300 mm 240 mm 420x200 mm rund 240 mm, quadrat 230 rund 170 mm, quadrat 170 830 mm 1650 mm Bwodpfxsynm S Io Aftei 1200 mm 1900 mm 400 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Optional equipmente: adjustable vice pressure EUR 330,--

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 14110 € 270.91 € Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 280 mm 240 mm 420x200 mm rund 260 mm, quadrat 240 rund 170 mm, quadrat 160 rund 200 mm, quadrat 180 830 mm 1600 mm 1600 mm 1800 mm 488 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment Bjdpfxoynm Sus Aftewi _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected.