Used Automatic Feeder for sale (24,127)

Condition: good (used), Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm Ncjdpfsha Hvvex Acnsu -Weight: 2200 kg

Condition: refurbished (used), Automatic cutting-off machine RAWYLER AWT-5 fully revised with new electrical cabinet SIEMENS. Variation spindle speed and cam Several machines in revision. Njdsx Tcuqspfx Acnecu

Condition: new, Year of construction: 2023, A machine directly from the Hanwha authorized dealer HB TURNKEY (Hanwha Germany): Hanwha CNC turning center XD10 with Fanuc 0i series control (comparable to Star SR-10J) MAIN SPINDLE - Maximum turning diameter: 10mm - Max. spindle bore diameter: 10mm Ncodogq Ravspfx Acnou - Maximum speed [rpm]: 15,000 - Maximum power [kW]: 3.7 BUILT-IN MOTOR - C-axis with 0.001° - Z1 travel [mm]: 155 - Synchronously rotating guide bushing unit - Type of guide bushing: SD125 R - Type of collet: 1212 E TAILSTOCK - Maximum speed [rpm]: 10,000 - Maximum power [kW]: 1.1 - C-axis with 0.001° - Maximum bar diameter [mm]: 10 - Max. part length, push-out in front: - Z2 travel [mm]: 180 - Type of collet: 1212E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 5 external turning tools 8x8mm Cross drilling/milling unit: - Number: 4 driven drilling/milling spindles, ER11 - Power: [kW]: 0.55, S6000 - Front drilling attachment for 4 drill sleeves - ER11 REAR END PROCESSING - Tool carrier for 4 tools - 2 driven drilling/milling spindles ER11 modular - 2 fixed drilling/milling spindles ER11 modular AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Rapid traverse m/min: 32m/min (Z1, Z2, Y, X2); 24m/min (X1) Connected load [kW]: 12KVA CONTROL Control type: Hanwha Fanuc 0iTF series Number of axes: 6 (X1, Z1, Y1, Y2, X2, Z2, X2) Simultaneous 4-axis control External operating panel with handwheel 9.5" color LCD/MDI monitor Automatic power-off function Program verification function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / part counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface to bar feeder ACCESSORIES Leveling feet with leveling elements Part conveyor with collecting tray Toolbox and service tool set Work area light Signal lamp (3-color) Safety door switch with locking Maintenance and central lubrication unit (1.8 liters lubricant volume) Coolant flow monitoring Coolant tank 140 L Pneumatic blow-out device for tailstock collet Manual and documentation in German and English (Maintenance and operating manual incl. parameter list and test protocol) - READY FOR IMMEDIATE USE - We will gladly calculate and optimize the cycle time for you and set up your newly acquired machine in our facility. WE FIND A SOLUTION - Whether standard or HB-modified.

Condition: new, Year of construction: 2023, operating hours: 10 h, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Stroke Z1 [mm]: 50mm /160mm Synchronous guide bush unit Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 2.2 Maximum pick-up diameter [mm]: 20 max. part length ejection to the front [mm]: 70 C-axis with 0.001° Stroke Z2 [mm]: 215 Type of collet chuck: 145E / F25 TOOLING OPTIONS Ncjdpfetw Uzvsx Acnsu Tool slide X1,Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling device: - Quantity: 4 driven ER16 modular drilling/milling spindles - Power: [kW]: 1.1 (S6000) - Front drilling unit for 5 drilling quills diameter 25 mm Cross slide counter spindle - Quantity: 2 driven drilling/milling spindles ER16 modular - Power: [kW]: 1.0 (S6000) Back machining 6 driven tools axial ER16 2 driven tools radial ER16 3 turning tool holders 12x12 XD20III 1.0 kW (Fanuc) 1.02 kW (Siemens) TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 5 Number of spindle axes: 2 Rapid traverse speeds m/min: 32m/min (Z1,Z2,Y,X2) ; 24 m/min (X1) Connected load [KVA]: 15 CONTROL Control type: Fanuc 0i-TF Number of axes: 5 (X1, Z1, Y1, X2, Z2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface to bar feeder Interface for JBS ACCESSORIES / INCLUDED Alignment shoes with leveling elements Tool box and service tool set Work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English (maintenance and operating instructions incl. parameter list and test log)

Condition: good (used), Year of construction: 1979, Schütte SF51 6-spindle automatic bar lathe Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle automatic bar lathe with a 51 mm spindle bore, ideal for the efficient serial production of turned parts. These robust machines feature an electronic cam control system that offers high process stability and flexibility for turning, drilling, and threading operations. The machine is valued for its stability and flexibility in manufacturing demanding workpieces. Technical status: The machine has been regularly modernized and is up to current technical standards. Maintenance & Servicing: Professional maintenance performed strictly according to schedule by specialists. Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle automatic bar lathe Number of spindles: 6 main spindles Control system: Conventional Njdpfsyhpvpjx Acnscu Spindle bore: 51 mm Max. feed: 125 mm Max. turning length: 102 mm Max. drilling depth: 102 mm Threading unit Chip conveyor 6-position bar loader Voltage: 400 V The orange transport rack for long stock is included in the offer. The scissor lift table is not part of this auction but can be purchased from us separately. Gruse ELS 2-13-9 hydraulic scissor lift table "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Strapping machine Mosca RO-M Njdpfotncc Uox Acnocu Manufacturer: Mosca Type: RO-M Semi-automatic carton strapping Strap width: 4 to 12 mm Hot wedge welding system Adjustable strap tension Control: ecomat 100 Foot pedal for strapping release Table surface: W 640 mm Working height: 830 mm Power supply: 400 V Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 2018, Basket diameter 1.100 mm Nedozcga Iopfx Acnscu Usable height 500 mm weight max. in kg 350 kg tank 250 l output 15,4 kW Operating temperature max. 75 °C Sporer PCS Aqua Jumbo Iso parts washer or automatic parts cleaning machine for the automatic cleaning and degreasing of workpieces using a heated, aqueous cleaning solution via a spray process. The machine operates as a top-loader with a rotating wash basket and is suitable for large and heavy components in workshops, maintenance, and industry. The Iso model features thermal insulation to reduce energy loss. The pumps are leaking and need to be overhauled or replaced.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, ANCIMO DRG-45 AUTOMATIC FILLING, CAPPING, AND LABELING LINE (2016) Manufacturer: ANCIMO Model: DRG-45 Year: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. DESCRIPTION Automatic filling line specifically designed for containers with cups and similar formats, equipped with a high-precision volumetric dosing system using 8 pistons adjustable by a micrometer screw. The equipment is in excellent condition, with few operating hours, and is ready for start-up. It is supplied with complete technical documentation, CE marking, and electrical and pneumatic diagrams. TECHNICAL DATA • Dosing capacity: 25 – 250 cc • Filling system: 8 adjustable volumetric pistons • Maximum production: up to 3,600 containers/hour • Micrometer adjustment of volume for quick and precise changes EQUIPMENT INCLUDED • Pressure capping head • GMS SATRL25 cap feeder hopper • GMS SABV3CIR510 AH circular positioning vibrator • GMS SAVR1 linear feeder • GMS SAENF150 container elevator • GMS SABV5CIR900 AH circular positioning vibrator • GMS SAVR2 linear feeder • Cup loading and unloading system • EIDOS PRINTESS P4E05# labeling/printing machine DOCUMENTATION • Original manuals • CE declaration • Electrical diagrams • Pneumatic diagrams APPLICATIONS Suitable for cosmetic, food, chemical, pharmaceutical, and other liquid or semi-liquid products that require precise and repetitive dosing. ADVANTAGES • Complete production line • Very few operating hours • Excellent overall condition • Complete documentation available Njdpfszcfqrex Acnocu • Industrial production up to 3,600 containers/hour • Available for inspection

Condition: good (used), Year of construction: 1988, 6-spindle-automatic lathe brand: TORNOS type: SAS16 new in: 1988 equipped with: sub spindel threading attachement Nsdpfxovwmb Dj Acnjcu flushing system chip conveyor automatic baroader IEMCA PRA 40/31/P

Condition: excellent (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, Equipment: documentation/manual, EQUIPMENT: Ncodpfx Aozcdbijcnou FANUC 31i control system Back-end machining Synchronous spindle Powered tools C-axis Part conveyor Oil mist extraction system Fire extinguishing system Bar feeder magazine FMB TURBO 3-36

Condition: good (used), Year of construction: 2001, machine/vehicle number: 1101420, Offer 26077 Technical specifications (approximate): - Control system for fully automatic operation - (Feed, cutting speed, automatic material feed, etc.) - Cutting capacity at 90° (round): 260 mm - Cutting capacity at 90° (flat): 300 x 260 mm - Smallest material dimensions (round/flat): 15 / 10 x 15 mm - Smallest section length: 10 mm - Remaining material length in automatic mode / manual mode (approx.): 130 / 40 mm - Saw band dimensions: 4640 x 34 x 1.1 mm - Cutting speed, continuously adjustable: 20 - 140 m/min - Cutting pressure, continuously adjustable: 0 - 10 m/min - Hydraulic material clamping system with adjustable clamping pressure - Coolant system - Total drive power: 400 V / 8.0 kW - Space requirement (approx.): W 2700 x H 1600 x D 2450 mm - Weight (approx.): 1800 kg - Roller conveyor length: 2000 mm Njdpfx Acoy Ddpdenecu

Year of construction: 2025, condition: used, functionality: unexamined, Complete Automatic Roll Forming Line (fully compatible with all Unistrut products) Year of manufacture: 2025 Model: CIRF-2019-2486 Ncjdozc Hkgspfx Acnju Unistrut 41 x 41 and 41 x 21 profile Approximately 15 meters per minute UK / Irish wiring standard (UK wiring schematics, safety pull cord system around main beds) with 2-ton de-coiler 3-stage, 3-ram punching unit (Hole Size: Approx 12mm × 25mm / Hole Spacing: Approx 50mm centers) Fully automatic upstroke shear Auto Hydraulic Logo printer/stamper Discharge table Overall Length: Approximately 30 meters

Condition: excellent (used), Year of construction: 1995, - machine in stock - after a technical review - very good condition - year of production 1995   TECHNICAL PARAMETERS: - turning length max 1300 mm - turning diameter 120 mm - three lower knives - five top knives - steady - hydraulic knife control - automatic control - magazine   Machine dimensions: - length 380 cm Nsdpfod Rkkzox Acnocu - width 210 cm - height 215 cm - weight ~ 3490 kg

Condition: new, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Includes 1 nozzle per exit (round, square, triangular or rectangular) with a maximum outer diameter of 40 mm Product temperature up to ± 80 °C Njdpozazr Tofx Acnjcu With universal connection With pneumatique knife 3 exits belt width 25 cm With support frame in height adjustable New

Condition: used, Year of construction: 1993, functionality: fully functional, Intended use: For the automatic winding of wire onto spools. The twin spooler is suitable for use behind a drawing machine and inline annealing furnace. Njdszf Ak Hspfx Acnecu Technical details: Control system: Siemens S5 Materials processed so far: CU - AL, AL alloys for spools 630 mm Number of spooling stations: 2 Technical condition: HMI, main motor controller, lay-on motor, and transport motor renewed Wire diameter min: 1 mm Wire diameter max: 3.5 mm Spool flange diameter max: 762 mm Total spool width max: 472 mm Spool bore diameter max: 127 mm Spool axis: horizontal Spool change: automatic Spool speed: 2200 min⁻¹ Automatic shutdown in case of wire breakage and full spool: yes Lay-on system: available Arbor clamping: hydraulic Drive type: DC motor Controller manufacturer: Siemens Drive power: 2 x 35 kW Drive speed: 2370 min⁻¹ Operating voltage: 380 V Frequency: 50 Hz Electrical cabinet: available Additional data: Spool change: Fully automatic Empty spool feeding via conveyor belt. Full spool unloading via spool table and conveyor belt. Consisting of: NIEHOFF VM 400 dancer Electrical cabinet

Condition: used, Year of construction: 2006, overall weight: 92 kg, hopper volume: 6 l, The Motan material separator can only be used in conjunction with an bypass compressor. The bypass compressor is not part of the offer. Payment: 100% prior to delivery Manufacturer: Motan Ncjdpfxjit Ru As Acnou Type: HLB 06-1-A010-0 Condition: gebraucht CONVEYING DEVICE: Abscheider Conveying capacity: - Hopper volume: 6 l Connection diameter: 40 mm (Materialleitung) Total installed power: - Other equipment: Spannung: 24 V Bedienungsanleitung: deutsch GENERAL DATA: - Total weight: 9,2 kg Total size L x B x H: 28 x 23 x 63 cm

Condition: used, Year of construction: 2007, overall weight: 115 kg, hopper volume: 6 l, The Motan material separator can only be used in conjunction with an bypass compressor. The bypass compressor is not part of the offer. Payment: 100% prior to delivery Manufacturer: Motan Type: Metro HBS06-1ABA-AAA-A-A Condition: gebraucht CONVEYING DEVICE: Abscheider Conveying capacity: - Hopper volume: 6 l Connection diameter: 40 mm (Materialleitung) Total installed power: - Other equipment: Spannung: 24 V, neuer Filter + Filterhalter CONTROL: Multifunktions-Panel METRO HBS Bedienungsanleitung: deutsch GENERAL DATA: - Ncodsiacrmjpfx Acneu Total weight: 11,5 kg Total size L x B x H: 34 x 38 x 70 cm

Condition: new, cutting diameter 360 mm saw band length 5050 x 41 x 1,3 mm cutting width 1,3 mm cutting speed 15-100 m/min total power requirement 4 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3,0x 2,6 x 2,2 m The X-SMART 4 ??is an automatic 2-column band saw suitable for straight cuts in solid materials with a diameter of up to 360 mm. Other features include: Ncodjwg Sflspfx Acnou 4 kW drive motor with 41 mm saw blade width Modern 7" touchscreen CNC control Inclined saw frame Solid 2-column structure Linearly guided material sensor Hydraulic cutting pressure regulation 500 mm feed unit Double vise 2 vises in front of and 2 vises behind the saw blade Electrically driven chip conveyor Cleaning gun Full enclosure LED work light Minimum remnant length 100 mm Optionally available: Bundle clamping device; MMS and roller conveyors

Condition: good (used), mileage: 506,164 km, power: 132 kW (179.47 HP), first registration: 11/2012, fuel type: diesel, tire size: 215/75R17,5, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 8,050 mm, total width: 2,550 mm, total height: 3,670 mm, loading space length: 6,120 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, trailer coupling, = Additional options and equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) Ncsdpfx Asxr Ub Rscnju - Fixed fifth wheel - Halogen lights - Hydraulic system - Short cab - Manual adjustment - Radio/cassette - Fabric upholstery = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 5,035 kg, Gross weight: 7,490 kg, Total fuel tank capacity: 180 liters, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Suspension type: Air suspension, Cabin type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lights, Seat heating, Engine power: 132 kW (177 hp), Fuel: Diesel, Euro: 5, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 6, Power steering, ABS, Hydraulic system, Starter battery, Central locking, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Spare wheel, Spare wheel tread: 13% = Further information = Transmission Gearbox: ZF, 6 gears, automatic Axle configuration Tyre size: 215/75R17.5 Brakes: Disc brakes Axle 1: Steering; Left tyre tread: 6 mm; Right tyre tread: 7 mm; Suspension: leaf spring Axle 2: Twin wheels; Left inner tyre tread: 9 mm; Left outer tyre tread: 11 mm; Right inner tyre tread: 10 mm; Right outer tyre tread: 10 mm; Suspension: air suspension Weights Empty weight: 5,035 kg Payload: 2,455 kg GVW: 7,490 kg Functional Loading platform height: 96 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Identification Registration number: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-turnover inventory • Recognized quality • Good price • Honest commercial practices • We speak many languages • We understand our customers • Import and transport assistance • (Export) registration plates quickly arranged • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and the complete inventory: Leasing via Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and submit an enquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2008, machine/vehicle number: DEPAL43, Used TMG VEGA 60 automatic Depalletizer 5000 BPHTechnical Specifications & Performance DataThis Automatic Depalletizer VEGA 60 is a robust solution engineered for reliable bottle handling in industrial packaging environments. Manufactured by TMG, it supports efficient unloading of bottles from pallets and integrates automatic interlayer management for streamlined operation. With a production speed of 3000 bph, it is well-suited for medium-capacity beverage production and used bottling line applications. Its design ensures consistent performance for both PET and Glass containers, particularly in 1.5L formats.Manufacturer: TMGModel: VEGA 60Year: 2008Production speed: 5000 bphBottle formats: Compatible with 1.5L bottle formatsContainer types: Designed for Glass bottle handlingAutomation: PLC-controlled operationSafety: Electronic safety barrierInterlayer management: Tier-sheet magazine with automatic interlayer removal; can remove protective hoods from the same magazineAdvanced Automation & Control SystemsThe VEGA 60 features PLC-based automation for precise and repeatable operation across shifts. The control logic enables smooth layer-by-layer depalletizing, coordinated motions, and clear fault diagnostics. The electronic safety barrier provides active operator protection, ensuring safe access during setup and maintenance while maintaining productivity. Quick settings allow fast adaptation to standard 1.5L bottle handling and efficient start-up after pauses.Production Line Integration CapabilitiesThis depalletizer integrates easily within new or second hand bottling equipment configurations. It can operate as a standalone depalletizing module or inline with conveyors, accumulation tables, rinsing machines, and downstream filling, capping, and labeling machinery. The automatic tier-sheet handling reduces manual intervention between layers, improving flow to subsequent packaging machinery. Its design supports both PET and Glass bottle logistics, making it a flexible choice for beverage production lines handling water, juice, beer, or wine in compatible formats.Machine Condition & Maintenance HistoryProfessionally engineered by TMG in 2008, this machine is presented as a second hand industrial packaging asset suitable for immediate integration once installed and commissioned. The PLC control and robust mechanical design contribute to predictable maintenance intervals and long service life.Operational Performance & VersatilityAt 3000 bph, the VEGA 60 is ideal for medium-output operations seeking dependable depalletizing performance. Automatic interlayer and hood removal minimize manual handling, reducing changeover time between pallet layers and enhancing workplace safety. The system is optimized for 1.5L bottles and supports both PET and Glass containers, aligning with a wide range of beverage production requirements and used bottling line upgrades.Installation Requirements & Site PreparationThe depalletizer requires adequate floor space for pallet infeed, tier-sheet magazine access, and discharge conve... Ncjdpfx Acozc Hqyonju

Condition: used, Year of construction: 2018, Label dispenser Macro SP12 right side RA1956 Manufacturer: Schwinn Model: Macro SP 12 Year of manufacture: 2018 Alignment: right Label passage: up to 115 mm Label speed: 1-18 m/min Maximum diameter label roll: 300 mm Core diameter 40 mm expandable with adapter Ncjdpfx Aok Abm Ascnou Power supply: Euro plug 230/50Hz Integrated control with control parameters, controllable inputs and outputs, fault messages,... Additional equipment: Start triggering external AP 010-500 Vacuum Applicator Module Maintenance - equipment - combination Core adapter AP 031 Prewarning - label supply Mounting frame Control box Warning light, 3-stage

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Modular 50S The Minipack Modular 50S is a compact, well-proven semi-automatic packaging machine with L-shaped sealing for producing shrink wrap packaging. The machine is universally applicable and easy to operate. – Semi-automatic packaging machine with L-shaped sealing – Electronically controlled sealing system – Manual or automatic operation mode Ncsdpfx Aox Tr Tcecnou – Simple and intuitive operation – Output up to 900 units per hour – Usable sealing bar dimensions: 540 × 400 mm – Max. film roll width: 600 mm – Max. film roll diameter: 250 mm – Working table height: 930 mm – Machine dimensions (closed): 1,565 × 750 × 1,100 mm – Machine dimensions (open): 1,565 × 750 × 1,400 mm – Machine weight: 151 kg (net) – Machine on wheels

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK Modular 70 The Minipack Modular 70 is a powerful semi-automatic packaging machine featuring an L-bar sealing system for producing shrink film packages. Thanks to its larger sealing bar, it is also suitable for packaging larger products. – Semi-automatic packaging machine with L-bar sealing – Electronically controlled sealing system – Manual or automatic operation modes – Simple and intuitive controls – Output up to 900 units per hour – Usable sealing bar dimensions: 840 × 600 mm – Max. film roll width: 800 mm – Max. film roll diameter: 300 mm – Working table height: 930 mm – Machine dimensions (closed): 2,070 × 960 × 1,220 mm Njdpex Tr Umsfx Acnjcu – Machine dimensions (open): 2,070 × 960 × 1,510 mm – Net weight: 243 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Pratika 80 MPS The Minipack Pratika 80 MPS is a fully automatic side sealing packaging machine. It is designed for products with a maximum height of 360 mm and is also suitable for very long products. – Fully automatic side sealing packaging machine (continuous side sealing) – Maximum product height: 360 mm – Product lengths over 2 m possible – Usable seal bar dimension: 700 mm – Maximum film roll dimensions: Ø 350 × 800 mm – Infeed conveyor height: 915 mm – Machine dimensions (closed): 2,785 × 940 × 1,770 mm – Machine dimensions (open): 2,785 × 940 × 2,280 mm Njdpjyant Rsfx Acnjcu – Output: up to 3,000 packs/h (depending on product/film)

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,893 mm, total height: 1,585 mm, total width: 1,240 mm, warranty duration: 12 months, type of input current: AC, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, Pratika 56 MPE X2 Ncjdpfx Acsx Tp H Tenju The Minipack Pratika MPE X2 is a proven, fully automatic machine for manufacturing shrink film packaging. This machine is highly versatile and user-friendly, making it suitable for a wide range of products in both food and non-food sectors. • Fully automatic L-sealer with brushless motors and modern PLC control with a 7” color display • Simple operation • Storage of up to 128 recipes including product images • Quick product changeovers • Up to 3,600 units per hour • Convenient and fast product changeovers • Max. product dimensions: 600 x 400 x 240 mm • Machine dimensions: 2,480 x 1,240 x 1,675 mm • No compressed air required! • Doors on both sides of the machine • Machine interior equipped with lighting