Used Automatic Punching Machine for sale (76,423)

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. Hodpfjz Dtbkex Aftefn The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1915, Oteman Delta P03K Quick automatic fabric spreading machine with spreading table, built 2003 in Igualada (Barcelona). In working order. TECHNICAL DATA Manufacturer: Oteman S.A., Igualada (Barcelona), Spain Model: P03K Quick Serial number: 1915 Year of construction: 2003 Maximum working width: 1,800 mm Maximum load: 80 kg Maximum roll diameter: 600 mm Maximum speed: 2 m/sec Hfsdpfx Ajz At Scoften Power: 2 kW Voltage: 380 V three-phase Current: 10 A Frequency: 50/60 Hz Machine weight: 498 kg Control: Delta + JT Kombi programmable controller Spreading table: included, with travelling rails Condition: in working order The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.

Condition: excellent (used), Year of construction: 2001, HELMERDING Press KDH 400/2600/2 Pressing force 4,000 kN Stroke rate 15-60 strokes/min Hedpfx Afsz Ek Anotofn Stroke adjustment 80-250 mm Slide adjustment 175 mm Installation height 550-800 mm Table area 2,500x1,600 mm Slide area 2,500x1,400 mm Pass-through hole in the press table 1,300x800 mm Weight 106,000 kg Lorenz Strip Line EWH 600/150 Strip width 80-600 mm Strip thickness 0.6-6.0 mm Max. coil weight 7,500 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 168, working width: 400 mm, compressed air connection: 8 bar, type of input current: AC, total width: 6,454 mm, total length: 7,685 mm, total height: 256 mm, overall weight: 5,000 kg, product height (max.): 120 mm, Equipment: CE marking, PERONDI LSV ESV95 – Complete Production Line in Very Good Condition PERONDI LSV ESV95 in very good condition, offered as a complete production line together with associated auxiliary equipment. The machine has been well maintained and carefully operated throughout its service life. The PERONDI ESV95 is in very good working condition and is ready for continued professional production. The machine has been regularly maintained and operated with care. Complete Production Line Includes: PERONDI ESV95 Wrapper Hot-melt glue system Feeder Hfedpfx Afjz Hl Smjton Vacuum belt Minimum Box size: 60 x 60 x 20 mm Maximum Box size: 600 x 400 x 120 mm Machine highlights: Manufacturer: PERONDI Model: LSV 5060 Very good overall condition Well maintained Carefully operated Ready for continued production Inspection and demonstration possible by appointment The included equipment forms a complete and integrated production line, providing the buyer with a ready-to-use solution for continued professional production. This is an attractive opportunity to acquire a well-maintained PERONDI LSV ESV95 together with all associated equipment, rather than purchasing the individual components separately. The complete line is currently available for inspection, and a demonstration can be arranged by appointment. Further technical specifications, photographs and additional information are available upon request.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program Hsdpfx Asz Ipunsftjfn TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: excellent (used), Year of construction: 2002, Schuler Press Type: GMO 2-400-3200-66/203 Year of manufacture: 2002 Stroke adjustment: 66 - 203 mm Stroke rate per minute: 20 - 100 1/min Ram adjustment: 150 mm Installation height: 700 mm Table area: 3,200 x 1,200 mm Total weight: 72,500 kg Coil handling system, Schuler Automation Coil width: 100 - 1,000 mm Coil thickness: 0.7 - 5.0 mm Hjdpfjz R Rwujx Aftsfn

Condition: used, For profiling and edge-milling windows doors Hfedpfeztv Afex Aftsn individual components and similar items with all-round profiles, including return feed Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, - 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Automatic FROMM PM100002 Industrial Strapping Machine – Year 2022 – PET Strap – Automatic Wooden Slat Insertion System FROMM Packaging Automation industrial automatic strapping machine, model PM100002, manufactured in 2022 and designed for integration into an automated production and packaging line. The machine is particularly suitable for the automatic strapping of bundles, profiles, long products and industrial packages. Identification details Manufacturer: FROMM Packaging Automation S.r.l. Model: PM100002 Year of manufacture: 2022 Project number: 2110304 Serial number: 48.100002.057 Original delivery date: 19 September 2022 Machine configuration FROMM MH550 side-mounted strapping head KB4 strap dispenser Lower side magazine for wooden slats Automatic slat lifting system Automatic magazine movement Strapping arch Pneumatic system Electrical cabinet and control system Prepared for integration and communication with an automated production line Technical specifications Strap type: PET/plastic strap, 16 × 0.8 mm Strap feeding speed: 5.3 m/s Strap recovery speed: 5.3 m/s Adjustable tensioning force: 0.5–3.5 kN Final tensioning speed: 105 mm/s Power supply: 400 V – 50 Hz Maximum installed power: 3.8 kW Maximum current: 9.8 A Minimum compressed-air pressure: 6 bar The FROMM MH550 is a heavy-duty industrial strapping head designed for demanding applications, with a maximum tensioning force of approximately 3,500 N and friction-weld strap sealing. Documentation included. Only 108.000 cycles The machine is supplied with extensive original FROMM documentation, including: Complete instruction manual Electrical diagrams Pneumatic diagrams Spare-parts lists MH550 strapping-head manual KB4 dispenser manual Hodpozq Df Nsfx Aftsfn The equipment was originally supplied as partly completed machinery intended for integration into a complete production line. The relevant Declaration of Incorporation is available.

Condition: excellent (used), Year of construction: 2024, operating hours: 3,540 h, functionality: fully functional, punching force: 280 t, X working area max.: 3080 mm Y working area max.: 1540 mm Operating hours: 3540 hrs Control: CNC control LABOD with graphics Standard equipment Hydraulic punching machine - Punching force: approx. 280 kN (28 tons) - Throat depth: approx. 1750 mm - Max. punching diameter: 70.0 mm - Max. stroke height: 90 mm, steplessly programmable up and down via control - Table width left + right: 3430 mm each - Table depth: 3160 mm - Table height: 900 mm + 8 easily exchangeable cassette holders + Rotary drive, tool holders top and bottom continuously rotatable 360° + 1 piece, indexable Revotool tools + Programmable clamp positioning + Scrap slug extraction system + Spray device + Brush table Hsdpez Rmansfx Aftjfn + Brush table extension tables + Multitalk, USB, SD memory card and network connection + Digital stroke height adjustment + Three-sided safety light barrier + Various intermediate matrix plates for Trumpf tooling sizes 1 and 2 + Tooling package + 1 set of keys and operating manuals + Boschert EasySharp tool grinding device

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 Hfsdpfxovvx E So Afton weight of the machine ca. 1 t

Year of construction: 1991, condition: used, Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible. Hfjdpfx Aoz R A Izsfton

Year of construction: 2015, condition: used, Table dimensions: 1250x800x1200mm, connected load: 4kW, length: 1000mm, width: 1850mm, height: 1600mm, with documentation, no maintenance has been carried out, an on-site inspection is possible. Hfodpfx Afoz Sr N Rjton

Condition: used, Trumpf Type: TC 6000 L 1300 Laser and punching machine Technical data: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement: Punching: 900 min Marking: 2800 min Hedpfx Afszd Ulastjfn C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Well-maintained cabinet machine for band saws, new model. Includes a clamping device for band saws. Hsdpfx Afsz R S E Retofn Used very little. Photos show the original condition.

Condition: used, machine/vehicle number: 008342, Max. panel width: 70 mm Hfodpfxsx A Tc Uo Aftjn Max. panel length: 2100 mm No of injectors: 4 Lateral horizontal groups: yes

Condition: good (used), Year of construction: 1987, machine/vehicle number: 287, Offer 26239 Technical data: Hfedpfx Aez R Siiofton - Pressing force: 250 kN - Max. sheet thickness: 10 mm - Max. punch size / punching diameter: 105 mm - Stroke, continuously adjustable: 0 - 40 mm - Overhang: 750 mm - Highest stroke rate: 150 strokes/min - Installation height: 200 mm - Drive: 400 V / 8.2 kVA - Space requirement: approx. W 4200 x H 1700 x D 1700 mm - Weight: approx. 3200 kg - Including: - Stop table, left and right, each with X-axis travel of 2000 mm - Y-axis travel: 500 mm - Quick-change tool system for punches - Foot pedal; emergency stop button - Extensive range of accessories, various tool holders - Punches and dies

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 500 kg, See also homepage: bdtronic.com/de-de/heissnietanlagen/vollautomatisch-heissnieten/ Furthermore, there are other similar machines. Hfjdjy Nzhbopfx Aften Currently physically located at the subsidiary plant.

Condition: not inspected (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 4619, Gubisch UFA with 4 spindles, 1st spindle: synchronized rotation 2nd spindle: counter-rotation 3rd spindle: counter-rotation 4th spindle: counter-rotation Working height 115 mm, Spindle speed 6,000 rpm, Spindle diameter: 1 x 30 mm and 3 x 40 mm, Largest working diameter D = 220 mm, Smallest working diameter 100 mm, Total power consumption 19 kW, Hodpfx Aeznkyuoftjfn 380 V, 50 Hz, Weight approx. 1,850 kg, in “as is” condition, as inspected, available from the Seevetal warehouse, Ex works, excluding transport, subject to prior sale.

Condition: used, Year of construction: 1994, Product information "Boschert Hydraulic CNC Punching Machine" Type / Model: Boschert EL 750 digital Condition: Used Year of manufacture: 1994 Technical data Working area & dimensions Overhang (Y-axis): 750 mm Travel range (X-axis): 1500 mm Max. sheet size (without repositioning): 720 x 1700 mm Performance data & capacity Max. hydraulic punching force: Standard 280 kN Max. sheet thickness*: up to 12.7 mm Max. punching diameter: Ø 105 mm Stroke rate: max. 100 strokes/min Tooling: Original Trumpf® tool system Positioning accuracy with 2-axis digital display: ± 0.1 mm Hsdozp Raqepfx Aftofn Connection power: 4 kVA Control voltage: 220 V Required fuse rating: 3 x 16 A Installation dimensions (W x D x H): approx. 3400 mm x 1580 mm x 1600 mm Weight: approx. 3400 kg Equipment - includes various tools / accessories * Material-dependent, usually designed for thin sheet metal up to 6 mm at full diameter or any shape that fits into a circle of Ø 105 mm Inquiry item: Transportation costs in individual offer.

Condition: used, Year of construction: 2011, Offer: High-Precision and Versatile Punching/Nibbling Machine Boschert Compact 500 CNC Z (Year 2011) – Ideal for Flexible Sheet Metal Processing! We are selling a powerful and reliable punching/nibbling machine from the renowned manufacturer Boschert, which impresses with its advanced features and precision. This machine is the ideal solution for a wide range of punching and nibbling tasks, from one-off pieces to large-scale production. Key Features: • Manufacturer: Boschert • Model: Compact 500 500 x 1000 CNC Z • Year of manufacture: 2011 • Intuitive CNC Control: Multi-axis Ladob controller with graphical user interface for easy programming and visualization of machining processes. • Extended work area for greater flexibility: Hfsdpfsx Uxtfsx Aften o X-axis: 0–2000 mm (enables processing of long workpieces) o Y-axis: 0–750 mm (offers ample space for wide sheet metal) • Ultra-fast tool change: Trumpf quick-change tool system ensures minimal downtime and maximum productivity. • Universal tool compatibility: Compatible with the full range of Trumpf tools – reduce your tooling costs and expand your capabilities. • Secure and precise material handling: o Collet clamping: Ensures a firm grip of the workpiece during processing. o Non-contact repositioning up to 9999 mm: High-precision repositioning device with 2 sheet holders for efficient processing of even very long sheets without loss of position. • Dynamics and precision at their best: o Maximum positioning speed: 60 m/min for fast processing cycles. o Infinitely variable feed rates: Optimal adjustment of processing speed to the material and task. o Highest positioning accuracy: ± 0.05 mm for precise results on every workpiece. • Robust and durable construction: o Y-axis drive: Two ball screw-driven carriages located left and right beside the machine table ensure maximum stability and torsional stiffness. o X-axis drive: Ball screw and four recirculating ball guides guarantee precise and smooth movement. • Specialized equipment for small parts: Stop plate (L-bracket) for secure processing of small parts that can no longer be safely held by the collets – for maximum flexibility and minimal scrap. Condition: The machine is in very good, well-maintained condition and has been serviced regularly. It is immediately ready for operation and offers excellent performance for your sheet metal processing needs.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Hfedpfx Ajzv Niwefton Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Hedsz Ak Dijpfx Aftefn Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, The automatic profiling machine Weinig Type Univar 10 is designed for profiling and rebating windows, doors, individual components and similar workpieces with circumferential profiles. Its mechanisation enables single-person operation, making the machine suitable for efficient processing in window and door manufacturing. Technical data: - Year of manufacture: 1998 Hedpfjztv Eajx Aftsfn - 1. Profiling spindle – Motor: 11 kW - 1. Profiling spindle – Spindle diameter: 50 mm - 1. Profiling spindle – Clamping length: 320 mm - 1. Profiling spindle – Stroke: 4 x 80 mm - 1. Profiling spindle – Design: hydraulic - 1. Profiling spindle – Synchronisation device - 2. Profiling spindle – Motor: 11 kW - 2. Profiling spindle – Spindle diameter: 50 mm - 2. Profiling spindle – Clamping length: 320 mm - 2. Profiling spindle – Stroke: 4 x 80 mm - 2. Profiling spindle – Design: hydraulic

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 220 kN Sheet metal thickness: 8 mm Sheet metal thickness for stainless steel: 4–6 mm Working area: 2,535 × 1,280 mm Travel range X-axis: 3,000 mm Hedpfxoz Izquj Aftjfn Travel range Y-axis: 1,500 mm Number of stations: 18 Number of clamping jaws: 3 Number of tool cassettes: 4 pcs Part chute for parts up to: 500 × 500 mm MACHINE DETAILS TFT color screen: 10.4" Floppy disk drive: 3.5" EQUIPMENT Rotatable tool holder Automatic repositioning system with pressure plate Automatic tool changer with 18 stations 3 clamping jaws Programmable part chute for parts up to 500 × 500 mm Programmable pressure plate with pre-selectable clamping force Good parts container Tool spray lubrication 2nd lubricant tank Punch scrap extraction Chip bin Quick shut-off for hydraulics Order table TFT color screen 10.4" 3.5" floppy disk drive Graphic programming ToPs 2000 RJ45 network connection 2-beam safety light curtain Network connection including installation Multitool control Repositioning cylinder 4 tool cassettes

Condition: used, APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Hfjdpfxeztvzho Aftjn Technical data: - Workpiece length: 55–170 mm - Workpiece height: max. 27.5 mm - Workpiece width: max. 28 mm - Milling units: 2 - Cross-cut saw: 1