Used Barcode for sale (199)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 57269, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,205 mm, controller model: NC 1000, TECHNICAL DETAILS X-axis working range: 4,300 mm Y-axis working range: 2,205 mm Vertical spindle: 1 unit, HSK F63 Tool changer system: 8 positions (head) Tool changer system: 21 positions (rear, chain) Drilling head: BH 20 Vertical spindles on X-axis: 8 units Vertical spindles on Y-axis: 8 units Horizontal spindles on X-axis: 4 units Horizontal spindles on Y-axis: 4 units Saw unit on X-axis: diameter 120 mm Saw unit on Y-axis: diameter 120 mm MACHINE DETAILS Control: NC 1000 Cedpfxsydkdge Afnopu Software: Biesse Works Weight: 400 kg EQUIPMENT FT nesting table with full surface Automatic loading system with side lift table Automatic labelling machine for barcode printing Automatic printing and dispensing system for adhesive labels Automatic unloading system with motorized conveyor belt Front safety and protection system with mats and fences Automatic lubrication system Air conditioning for control cabinet Vacuum pump

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Workpiece length: min. 250 – max. 2500 mm Workpiece width: min. 70 – max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vertical Drilling Unit 2V21 HIGH SPEED 7500 Feed stroke (Z-axis): 60 mm Drilling depth: max. 38 mm Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 35 mm Spindle distance: 32 mm Spindle type: individually controllable Horizontal Drilling Unit 2H4X/1Y 4 drilling spindles each in X-direction 1 drilling spindle each in Y-direction Drilling depth: max. 38 mm Drilling height (Z-axis): 38 mm from top edge of workpiece Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 20 mm Spindle type: individually controllable Grooving Saw Unit N2 X-Y 90° Cutting depth: 30 mm Machining cross-section: max. 70 mm² Speed: 1,500 – 7,500 rpm, frequency-controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling Unit F2-ETP-6 KW Tool holder: for shaft diameter d = 25 mm Maximum tool diameter: 60 mm Tool clamping length: min. 65 mm / max. 95 mm Maximum tool weight: 2.5 kg Tool change: manual, ETP 25 hydro quick-clamping system Direction of rotation: clockwise/counterclockwise Speed: 6,000 – 18,000 rpm, steplessly programmable Drive: frequency-controlled three-phase motor Max. output at tool: up to 5/6 kW in continuous / intermittent operation (S1/S6-50%) EQUIPMENT Material infeed "IgeL-ROBOT" Lower machining support Upper machining support Vertical drilling unit 2V21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Codpfx Aoyg E R Hsfnspu Grooving saw unit N2 X-Y 90° Milling unit F2-ETP-6 KW Barcode reader Manufacturer: Datalogic

Year of construction: 2016, condition: ready for operation (used), This KEYENCE IM-6025 optical measurement machine was manufactured in 2016. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-6025 optical measurement machine. Contact us for more information about this machine. Additional information • Measuring head with 200 × 200 mm measuring field • Multi-angle illumination with photoelectric sensor • Digital measuring projector Cpjdpfx Ajyf Du Uofnju • Control unit • AC power cable • Mouse and keyboard • Rotary unit (for IM-8000) • Glass plates • Clamping device • Glass scale • Barcode scanner • Lighting • StyliOptional Accessories: • Test probe sets: 80 pcs, range 0.3–0.99 mm • Test probe sets with handles: 350 pcs, range 0.4–4 mm • Gauge sets: 800 pcs, range 4–12 mm • Limit plug gauges: 265 pcs, range 1–43 mm • Setting rings: 50 pcs, range 0.6–47 mm • Thread plug gauges: 170 pcs, range M1–M24 and various inch threads • Thread ring gauges: 265 pcs, range M1–M63 and various inch threads • Micrometers: 70 pcs, range 0–150 mm (analog and digital)Availability: • 2 units availableOptional: Comprehensive package of measuring instruments

Condition: new, SCM gabbiani p90 panel dividing saw - exhibition machine - special price! Technical data: Saw blade projection mm 90 Worktable height mm 950 Number of collets 5 as standard CUTTING DIMENSIONS mm 3300 x 3200 Variable saw carriage speed m/min 6 - 60 Variable pusher speed m/min 0 - 60 Saw blade motor power kW 7.0 Speed rpm 4650 Cpsdpfxeiz A Amo Afneu Saw blade diameter mm 340 Saw shaft diameter of main saw blade mm 80 Scoring motor power kW 1.5 Speed rpm 5850 Scoring blade diameter mm 200 Scoring blade shaft diameter mm 80 Compressed air requirement NL/min 300 Compressed air bar 7.0 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Suction nozzle diameter mm 4x120 including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M control panel with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation without "gateway" for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with castors, on the side of the longitudinal stop 590246 Fixed air cushion table 2500x800 mm with castors and reinforced fan 590239 2 x movable air cushion table 1500x600 mm with castors and reinforced fan 590244 Saw carriage with independent stroke control of the saw and scoring saw blade 590245 Optimized vertical stroke of the saw blade on 2 levels (medium/maximum) 590143 Device for grooves with manual height adjustment of the saw blade 590241 Execution of grooves (feed/return of the saw carriage) 590164 Double lateral automatic aligner 301230 Foot switch for starting and stopping the work cycle 590044 Compact labeling unit - printing of labels with barcode 590144 4 x additional clamps 900088 Magnetic tape monitoring of the pusher position 102015 European safety regulations (CE mark) 109993 MACHINE LANGUAGE: German

Year of construction: 2011, condition: ready for operation (used), This KEYENCE IM-6020 optical measurement machine was manufactured in 2011. It includes a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-6020 optical measurement machine. Contact us for more information. (Two units are available) Additional Information • Measuring head with 200 × 200 mm measuring field • Multi-angle illumination with photoelectric sensor • Digital measuring projector • Control unit • AC power cable • Mouse and keyboard Cpjdpsyfft Sofx Afnju • Rotary unit (for IM-8000) Optional Accessories: • Test probe sets (80 pcs, 0.3–0.99 mm) • Test probe sets with handles (350 pcs, 0.4–4 mm) • Gauge sets (800 pcs, 4–12 mm) • Limit plug gauges (265 pcs, 1–43 mm) • Setting rings (50 pcs, 0.6–47 mm) • Thread plug gauges (170 pcs, M1–M24 and various inch threads) • Thread ring gauges (265 pcs, M1–M63 and various inch threads) • Micrometers (70 pcs, 0–150 mm, analog and digital) Availability: • 2 units availableOptional: Comprehensive package of measuring instruments

Year of construction: 2023, condition: ready for operation (used), This KEYENCE IM-8020 optical measurement machine was manufactured in 2023. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-8020 optical measurement machine. Contact us for more information. Additional information • Measuring head with 200 × 200 mm measuring field • Multi-angle illumination with photoelectric sensor • Digital measuring projector • Control unit • AC power cable • Mouse and keyboard • Rotary unit (for IM-8000) • Glass plates • Software • Clamping device • Glass scale • Barcode scanner • Lighting • StyliOptional Accessories: • Test probe sets: 80 pcs, range 0.3–0.99 mm • Test probe sets with handles: 350 pcs, range 0.4–4 mm • Gauge sets: 800 pcs, range 4–12 mm • Limit plug gauges: 265 pcs, range 1–43 mm • Setting rings: 50 pcs, range 0.6–47 mm Cpsdjx D Dl Nspfx Afnju • Thread plug gauges: 170 pcs, range M1–M24 and various inch threads • Thread ring gauges: 265 pcs, range M1–M63 and various inch threads • Micrometers: 70 pcs, range 0–150 mm (analog and digital)Optional: Comprehensive package of measuring instruments

Condition: used, Year of construction: 2013, functionality: fully functional, Graf Synergy SL4-FF 4028 Extended dimension 4000x2800mm Weight 2700 Vaccum cleaner In working condition, can be seen at work. Barcode Reader Cedpfx Afoyg Ruwjnepu Veka Profiles

Condition: excellent (used), Year of construction: 2009, Multifinisher Duplo Docu Cutter DC-545 HC Maximum format: 320x457mm Minimum format: 216x279mm Min. 110gsm, Max. 230gsm Automatic feeder Up to 4 creases across the feed direction Up to 5 parallel cuts in the feed direction – 2 edge knives, 3 central knives Cpjdpfjygcpgex Afneu Up to 10 cuts across the feed direction Automatic cutting head adjustment, program function Cutting by mark or barcode Electrical connection: 230V, 50Hz Weight: 100kg

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Codpevvkfdsfx Afnopu

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Codpfjvvi Nzex Afnjpu

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Cpedpfx Afevvi Rfsnju

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Cpodpfx Ajvvi Spsfnou

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 1.7M books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. Csdpswu Sptjfx Afnepu One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Year of construction: 2014, condition: good (used), functionality: fully functional, FOM INDUSTRIE DALI 70 Cpedpfsxcywlsx Afnsu For profiles up to 7m 6.5KW Electrospindle ISO30 10 tool magazine on head (some tools are included) 8 Vices with independent positioning Automatic lubrication of guide blocks and recirculating ball screw lead screws Pendular machining MQL Barcode Reader Dimension 8600x2050 Weight 3900KG Can be loaded on truck

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Cpsdoxx Hwwspfx Afnju Engine size : 1,8 Kw Digital display with touch screen Hand held barcode scanner 6000 mm infeed with digital pusher 4000 mm manual outfeed with rollers

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 3,600 rpm, spindle motor power: 5,000 W, number of axes: 3, This 3-axis VITAP K3 CNC Wood Machining Centre was manufactured in 2023. Consider the opportunity to buy this VITAP K3 CNC Wood Machining Centre. Contact us for more information. Additional equipment • 20" LCD TFT monitor • Industrial PC Cpodpfxjx U Ub Sj Afnou • WSC user interface with Lister, parametric tools, and parametric setup • Graphical CAD programming TPA EDI32, basic version • USB port • Storage of all files • Macro programming • Import of DXF files • CE compliant Machine Benefits Qualitative Machine Benefits • A showroom machine never used Technical Machine Benefits • Feed speed: 25 m/min • Automatic 4-position tool changer • Max. Horizontal tool Ø: 12 mm • Max. Vertical tool Ø: 35 mm • Motor: 1. 7 kw • Number of independent vertical spindles: 12 // number of independent horizontal spindles on the x-axis: (2+2) • Max. Horizontal drilling depth on x and y axes: 35 mm // max. Vertical drilling depth: 43 mm // number of horizontal drilling spindles on the y-axis: (2+2) • Electro spindle: 5 kw with iso30 taper (rpm 12000–24000) • Max. Workpiece dimensions: y 1250 mm, z 50 mm • Min. Workpiece dimensions: x 270 mm, y 150 mm, z 3 mm Extra Information Axes: 3 controlled axes (X, Y, Z) X-Axis: DDT feed system Y-Axis: Drilling head travel path Z-Axis: Drilling operations Optional Upgrades (at Additional Cost): Tool set for production startup Tool holder ISO 30 / ER 32 Lubricant cartridges PC with a more powerful processor Additional pneumatic upper pressure Free Nesting System Barcode scanner Post-processor for MPR files Office software license TPA Front and rear roller support Narrow part guides Optional clamp opening for 60 mm thickness Angle gear options CAD design software for furniture construction

Year of construction: 2018, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 10,500 mm Travel path Y-axis: 1100 mm Travel stroke of Z-axis: 655 mm Swivel angle B-axis: 0° - 90° Angle C-axis: 0° - 360° Max. speed 24,000 rpm. Tool changer with 16 standard tool positions plus saw blade and angle head Central lubrication Many tool holders, including angle head and saw blade (500 mm) minimum quantity spraying Clamp detection and automatic shifting Codpfx Aex Up Uaefnopu 12 pneumatic material clamps Barcode scanner and label printer Swarf Conveyor made of metal Angle head for machining from below Extraction for cabin Pendulum operation through two light barrier areas Manual control console Spindle hours: about 7500 The loading is included in the price, machine is already dismantled Weight: approx. 14,000 kg

Year of construction: 2025, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel Cpsdouia Dqopfx Afnju - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: good (used), Label printer, barcode printer, printer, logistics labeling system, inkjet printer, thermal inkjet printer, control unit for inkjet printer Cjdsxnxl Sjpfx Afnjpu -Manufacturer: REA, control unit for inkjet printers -Type: JET HR 2K G2 .: 054.12.000 -Voltage: 95V-240V / 50-60 Hz -Dimensions: 350/310/H295 mm -Weight: 10 kg

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Cpsdpfxjx S Hzlj Afneu Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, drilling depth: 48 mm, workpiece height (max.): 60 mm, warranty duration: 6 months, Equipment: rotational speed infinitely variable, HOLZ-HER CNC Dowel Drilling & Insertion Machine POWER-PIN 7605 Workpiece length: min. 60 mm, max. unlimited (limited when positioned against stop fields) Software: CAPMUS V7x POWER-PIN Continuous LED strip for easy navigation and status indication Dowel insertion unit DA102 for pre-glued dowels as well as unfinished dowels in combination with PVA glue Glue system LS2 with electronic nozzle needle monitoring ECO MODE for energy-efficient operation 21.5" touchscreen display MOT3 package – motorized adjustment of drilling depth 2D barcode scanner The POWER-PIN dowel machine is suitable both as a standard dowel machine and as the perfect addition to, for example, nesting or console machines. From cabinet bodies to high-quality solid wood drawers from 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip always displays the machine status and assists the operator by indicating the correct position for inserting the workpiece. With the integrated barcode scanner, you can read, for example, DataMatrix codes containing all processing information for the workpiece. Drilling positions and depths are automatically set and approached by the machine – for maximum precision and efficient workflows. Delivery, installation, and commissioning of the machine can be carried out directly by us at an additional cost. Codpfeyf Eylsx Afnspu The machine is currently located in our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign language version, only the German version shall apply. Our terms and conditions can be found on our homepage at holzher.de/de/agb.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 400 h, functionality: fully functional, input voltage: 400 V, input current: 50 A, Equipment: Bluetooth, USB port, MURAT KD 658 Horizontal Four-Head Welding Machine MURAT AK 032 Gasket Pressing System AK 002 Barcode Scanner CNC; Touchscreen; Simultaneous welding of all four corners at 90°; Control panel supporting 5 languages (including Bulgarian); Control module for storing welding parameters for 200 profile types, with customizable characteristics for each: manufacturer name, profile width, profile height, profile number and color, support number, heating time, pressing time, and cooling time; Processing of white and colored profiles (automatic recognition of white and colored profiles); 0.2 mm weld seam on the visible side when welding colored profiles; 3 mm weld seam on the visible side when welding white profiles; Teflon tape dispenser for heating elements; Centralized lubrication system; Safety locking system with optical sensors to protect personnel; Electronic control ensuring temperature accuracy and stability; Heated pressing system; Gasket pressing system; Barcode system for reading cutting information; Minimum frame dimensions: 520 x 570 mm; Maximum frame dimensions: 3000 x 2585 mm; Profile height: max 180 mm, min 30 mm Cpedpfeyg Ifmsx Afneu MURAT CK 187 Auxiliary Cooling Table for CNC Cleaning Machine Moves the frame from the welding station to the cleaning machine. Cooling time is computer-controlled. MURAT CK 180 Positioning System for CNC Cleaning Machine (CN770) Automatic feeding and rotation of the frame during cleaning.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 241 2016 004, air pressure: 8 bar, air demand: 43 m³/h, input voltage: 400 V, input current: 50 A, Equipment: Bluetooth, USB port, HAFFNER - MURAT Cutting and Processing Center Productivity: 200-240 frames / 8 hours. This center performs profile cutting, milling, reinforcement profile insertion, and all tasks related to drilling various holes and their marking. Equipped with a full computer control system. Printer for barcode printing included. Capacity to load 10 profiles (up to 6.5 m each) on the platform. Fitted with a waste hopper for debris generated during cutting. Option for mounting two milling units for mullion processing. Automatic vertical and horizontal profile clamping and feeding. Maximum profile processing length: 3500 mm; minimum: 400 mm. Csdpfx Ajyg Icfefnopu Capable of processing 500 profile types. Automatic clamping of the reinforcement, manually pre-inserted into the profile. Milling of water drainage channels in 3 directions. Milling and copying of handle opening holes. Cutting at various angles possible (+/-30°).

Condition: new, Year of construction: 2026, functionality: fully functional, ### High-Flexibility Processing for Custom Furniture Production The NANXING ND612CTL is an upgraded industrial CNC center engineered for high-precision six-sided drilling and multi-directional routing. This model is specifically designed to provide maximum flexibility for "Batch Size One" production, allowing manufacturers to handle individual custom orders with the same efficiency as mass production. ### Key Advantages & Technologies Versatile 6-Sided Processing: Capable of full six-sided drilling, front/back and side grooving, plus front/side routing in a single seamless cycle. Specialized Hardware Support: Pre-configured to process complex joinery and fittings, including Lamello joints, LogiClip connectors, wiring channels, and sky/floor door hinge mortises. Advanced C-Axis & ATC System: Features a 5.5 kW top ATC8 spindle paired with a 5.5 kW C-axis. This configuration includes a 2-slot interchangeable cross-head for 360° rotation and multi-directional side routing. Co-Linear Drilling Efficiency: The top and bottom drilling blocks are aligned co-linearly, significantly increasing processing speeds for through-holes. Industrial-Grade Build: The monolithic frame is stress-relief tempered and processed using precision Japanese SNK equipment to ensure lifetime structural integrity. ### Technical Specifications Panel Dimensions Length: 200 – 2,800 mm; Width: 50 – 1,220 mm; Thickness: 10 – 60 mm | | Max Travel Speed | X/U Axes: 135 m/min; Y Axis: 75 m/min; Z Axis: 30 m/min | | Drilling Configuration | Top: 19 vertical, 32 X-horizontal, 22 Y-horizontal; Bottom: 9 vertical | | Main Spindles | Top: 5.5 kW ATC8 + 5.5 kW C-axis; Bottom: 3.5 kW ER25 | | Control System | Csdpfx Afjygtidsnopu SYNTEC CNC on Windows 10 platform | | Total Power / Weight | 29.2 kW / 4,900 kg | ### Standard Features & Smart Functionalities Intelligent Detection System: Equipped with high-precision sensors for automatic detection of panel length, width, and thickness to eliminate operator errors. Surface Protection: Features an automatic feeding and outfeed system with a brush device and conveyor belt to protect delicate or finished surfaces. Smart Tool Management: The user-friendly interface allows for easy tool setup and includes a life-cycle tracking function that alerts operators when tools need replacement. Open-Port Compatibility: Supports all major industry software formats, including MPR, DXF, BAN, BPP, PDX, XML, and XXL. Comprehensive Inclusions: The standard package comes with an overhead barcode scanner, mobile control console, and an air-conditioned electrical cabinet for consistent performance in any environment. ### About the Manufacturer NANXING Machinery (est. 1996) is a world-class leader in intelligent woodworking machinery. With professional assembly lines and rigorous quality control certified by CE specialists, Nanxing equipment delivers standardized performance and extreme durability for modern furniture factories.

Condition: new, Year of construction: 2026, functionality: fully functional, ### Double Workstations for Maximum Industrial Efficiency The NANXING ND712DTL is a high-performance industrial solution designed for six-sided drilling of wood-based panels. By integrating two independent workstations into a single compact footprint, this machine effectively doubles production efficiency while minimizing the required floor space. It is the ideal choice for high-volume furniture manufacturers looking for speed, precision, and reliability. ###Key Advantages & Technologies Dual Station Productivity: Features two independent workstations ( mm) with separate industrial computers and processing units, allowing for the simultaneous processing of two panels. Comprehensive 6-Sided Processing: Capable of drilling and routing on all six sides of a panel in a single cycle, eliminating manual handling errors. High-Rigidity Structure: The integrated machine body undergoes stress-relief tempering, vibration aging, and sandblasting to ensure long-term operational stability and precision. Advanced Control System: Powered by the SYNTEC CNC system and operating on Windows 10, delivering a processing speed that is 20%-25% faster than standard systems. Precision Engineering: The monolithic frame is manufactured in a single process using Japanese SNK equipment to guarantee high-precision alignment. ### Technical Specifications Panel Dimensions Length: 250 - 2,800 mm; Width: 250 - 650/1200 mm; Thickness: 10 - 60 mm | | Drilling Configuration | Top: 4 units (194 vertical); Bottom: 2 units (92 vertical) | | Main Spindles | 2 x 5.5 kW (ER25) + 2 x 3.5 kW (ISO30), max 18,000 rpm | | Max Travel Speed | X/U Axes: 135 m/min; Y Axis: 75 m/min; Z Axis: 30 m/min | | Tool Magazine | 8+8 position automatic tool changer for top electromandrels | | Total Power / Weight | 52.36 kW / 7,850 kg | ### Standard Features & Smart Functionalities Intelligent Panel Detection: Equipped with X-axis length detectors and Y-axis width compensation to ensure correct panel loading and prevent processing errors. Cpjdoygr T Ujpfx Afneu Specialty Hardware Support: Configured with specialized aggregates for Lamello grooves and "invisible" hardware connectors. Automatic Scanning: Integrated dual scanners ensure rapid reading of barcodes, even on long panels, to increase workflow automation. Surface Protection: Outfeed tables feature brushes and conveyor belts to protect delicate finished surfaces during movement. Enhanced Safety: A comprehensive safety fence with light barriers and safety doors ensures total operator protection. ### About the Manufacturer NANXING Machinery, established in 1996 and listed on the Shenzhen Stock Exchange, is a global leader in intelligent furniture manufacturing solutions. Known for innovative technology and meticulous quality control, Nanxing machines are certified to international CE standards.