Used Beading Machine for sale (64,861)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM Csdoq Nmm Tspfx Aktori ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm total power requirement 4 kW Credpov S Iqcofx Aktei

Condition: used, Year of construction: 1981, thread length: 100 mm, overall weight: 4,310 kg, screw diameter: 12 mm, production capacity: 260 unit/h, Equipped with Vibratory Bowl & Stand Crsdpfxezt Tc No Aktji

Condition: like new (used), Year of construction: 2024, operating hours: 2,026 h, functionality: limited functionality, machine/vehicle number: 28 zoll, type of input current: DC, overall weight: 45 kg, input voltage: 86 V, total length: 28 mm, total width: 28 mm, cubic capacity: 43 cm³, I am selling my 28-inch electric bicycle, which is still in perfect working order. All purchase documents are included. I bought it in February 2025. It has a Bosch 625W battery and can reach a speed of 245 km/h. Size: L. Crjdpfo Aa I Dxox Aktei

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction Crsdortrxiepfx Aktei * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle Crsdpfx Aertrzdjktoi (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Csdpfx Akertr D Ietori Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: good (used), Year of construction: 1993, Equipped with: 9" Cutter Head Power Stocks Crowning Auto Loader Heidenhein Scales Variable Feed/Speed Cutter Head RS232 Serial Port Trabon Lube Coolant W/Magnetic Chip Separator AC Servo Motors Full Splash Guards Stack Light Manuals Specifications: Work Gear Pitch Diameter 9" & 12" Cutter Head: 1-12", 1-8" Work Gear Max. O.D. 9" & 12" Cutter Head: 12 1/2", 8 1/2" Diameter Pitch Range: 4-20 Crjdjruahwopfx Aktji Distance Between Centers: 23" Cutter RPM 9" & 12" Cutter Head" 50-500, 50-400 Max. Table Travel Conventional, Tangential, Diagonal: 5", 2" 5"-2" Diagonal Traverse Angle Straight Shaving: 0 Deg. - 90 Deg. Traverse Angle Crown Shaving: 45 Deg. Max. Approx. Max. Table Angle Crowning: 5 Deg. Max. Table Angle Taper: 1 Deg 30' Max. Cutter Head Crossed Axes Angle Left & Right: 25 Deg. Table Cross Feed Inches Per Minute: .5-35 Table Up-Down Feed Inches Per Minute: .004-12.5 Table Up-Down Travel: 8 1/8" Approx. Weight: 9600 lbs

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Cjdpowuz Ekjfx Akteri Total number of tool changer positions: 16

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, Crodexwytcopfx Aktei spindle taper BT50, 4th axis unit through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: NV501GG5056, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, total height: 2,850 mm, total length: 2,800 mm, total width: 2,450 mm, overall weight: 7,300 kg, spindle speed (max.): 14,000 rpm, spindle nose: CAT40, MORI SEIKI NV5000 α1B/40 - Year: 2007 - CNC Vertical Machining Center - Serial Number: NV501GG5056 - CNC Control: Mori Seiki MSX-501 / Fanuc based* - X-Axis Travel: 1,020 mm - Y-Axis Travel: 510 mm - Z-Axis Travel: 510 mm - Table Size: 1,320 × 600 mm - Maximum Table Load: 1,200 kg - Spindle Taper: BT40 Credps Ah Dxbofx Aktei - Spindle Speed: 14,000 rpm standard* - Automatic Tool Changer: 30 positions standard* - Rapid Traverse X/Y/Z: 42 m/min - Spindle Nose to Table: 150–660 mm - Electrical Supply: 220 V / 60 Hz / 3 Phase - Power Requirement: 48 kVA - Made in Japan - Approx. Machine Weight: 7,300 kg - Approx. Machine Dimensions: 2,823 × 2,450 × 2,850 mm - Equipped with Multi-Position Tool Magazine - Chip Conveyor Included - Coolant System Included Free loading at customer's truck*

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Ricoh Pro 8310s” colour production printer Item for sale: 1 x Ricoh Pro C9200 with the following specifications: incl. Vacuum Feed LCIT RT5120 incl. Finisher SR5050 incl. Fiery NX Pro Server (Colour Controller E-46) Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 4,399,687 pages Black: Approx. 2,007,990 pages Colour: Approx. 2,391,697 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order A test printout can be seen in the photo Packaging and dispatch: Crsdpfx Ao Ah Sbqsktei You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! Before dispatch or collection, a functional test will be recorded on video for you. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg Codpeyk Dicefx Aktjri dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized backgauge, 2000 mm - Hydraulic upper jaw adjustment - Motorized lower jaw adjustment - Hydraulic tool clamping - Side guards - Foot switch - Operating instructions

Condition: used, Year of construction: 2007, travel -x axis 650 mm Codpezaf Hujfx Aktjri travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U | C40U | C-40U | C-40 U

Condition: used, Year of construction: 2006, travel -x axis 2.000 mm travel -y axis 620 mm travel -z axis 520 mm numbers of positions in the tool changer 56 tool adaptor SK40 5-axis machining center | HEDELIUS - RS60 Magnum KM2000 equipped with shuttle operation, rotating swivel turntable and chip conveyor. Please note that the technical details were added from comparable machines. The machine is in a well-maintained condition. Cedpfo Ah T U Tox Aktsri - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS60 KM2000 | RS-60 | RS 60

Condition: used, Year of construction: 2011, travel -x axis 850 mm travel -y axis 700 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 turning speeds 10.000 U/min numbers of positions in the tool changer 38 tool taper SK40 Codpfs Ah Uabox Akteri 5-axis simultaneous machining center | HERMLE - C 40 U equipped with internal coolant supply (80 bar), a 38-tool changer, a swivel axis, and a rotary table (ø 800). Additional equipment: - Swivel axis - rotary table (ø 800) - Blum Tool breakage control / -measurement The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 40 | C40 | C-40 | C40U

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, Equipment: auto duplex, brochure finisher, Konica Minolta Accurio Press C 14000, manufactured in 2022, in very good condition, tested and ready to print! Equipment: FS 532 RU 518 m IQ 501 + Video interface VI514 PF 713 Crjdpfx Aj Ah Tf Eoktsi PF 811 LS 507 FIERY IC318 NEW ARRIVAL – KONICA MINOLTA ACCURIOPRESS C14000 We are pleased to offer an exceptionally well-equipped Konica Minolta AccurioPress C14000, featuring a powerful Fiery IC-318 print controller and an outstanding range of professional options. This high-end production press offers: • Two high-capacity paper feeders, including one supporting banner printing up to 900 mm. • Paper handling capabilities up to 450 gsm. • An integrated document scanner for convenient scanning and copying operations. • IQ-501 intelligent quality control system for automatic colour calibration, colour consistency and precise front-to-back registration. • A copy count representing less than 20% of the machine's expected lifetime. • LS-507 high-capacity stacker for efficient handling of large print volumes. EXCLUSIVE PROVENANCE AND MAINTENANCE HISTORY This machine comes directly from the French Government and has been maintained exclusively by Konica Minolta France. All the latest available technical upgrades have been carried out, bringing this C14000 up to the same technical specifications and performance level as the newer C14000S. OPTIONAL FINISHING AND AUTOMATION UPGRADES This exceptional production press can be further customized to meet your specific printing and finishing requirements. The following additional options can be supplied upon request: • LS-507 High-Capacity Stacker: An additional stacking unit can be supplied if required, providing increased output capacity for long production runs. • FD-503 Multi-Folding Unit: Professional folding and punching capabilities, including Z-folding, letter folding and two- or four-hole punching. • SD-506 Saddle Stitcher: Professional booklet production with automatic folding, saddle stitching and fore-edge trimming. • AIT – Automatic Inspection Technology for IQ-501: An advanced automated print inspection system that detects image defects during production, helping to identify defective sheets and maintain consistent print quality. Requires the appropriate inspection modules and interfaces. • Automatic Ring Binding System: A professional ring-binding solution can also be supplied upon request, allowing the production of professionally bound documents. Other compatible professional finishing solutions can also be added according to your production requirements. A RARE OPPORTUNITY! As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. If you have any questions, don't hesitate to ask me. Our company offers the largest range of Konica Minolta production copiers and handles worldwide deliveries on request. Please do not hesitate to contact us for further information.

Condition: used, Year of construction: 2002, travel distance X-axis: 7,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 4,000 rpm, Travelling column milling machine Manufacturer: ANAYAK Cjdpfx Ajz Ic Alektjri Type: HVM 8000 Year of manufacture: 2002 Control: Heidenhain Technical details: X-travel: 7,300 mm Y-travel: 1,500 mm Z-travel: 2,000 mm Spindle speed: 4,000 rpm Tool taper: SK 50 Number of tool stations: 40 positions Condition: Used Available: from March 2027 The machine is under power and can be demonstrated. Technical features & accessories: - Control cabinet newly rewired - Orthogonal indexing milling head, 1° + 2.5° - Chip conveyor - Coolant system - Floor plates Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: new, Year of construction: 2012, functionality: unexamined, machine/vehicle number: Modelo Y15V # de Serie C12070192, screw diameter: 22 mm, displacement volume: 36 cm³, injection pressure: 1,417 bar, injection weight: 44 g, ejector stroke: 200 mm, plate length: 240 mm, plate width: 200 mm, plate height: 40 mm, total length: 1,200 mm, total width: 1,200 mm, total height: 2,400 mm, overall weight: 700 kg, heating capacity: 2 kW (2.72 HP), power: 2.2 kW (2.99 HP), type of input current: AC, input frequency: 60 Hz, input voltage: 220 V, I am selling 3 Guan Ming Y-15 V machines and 1 Y-25V machine, all new from old inventory. They have been stored in their original packaging since they were received from China in 2012 and have never been put into production. There are 3 machines with a capacity of 15 tons and 1 machine with a capacity of 25 tons. The Y-15V machines have a 22 mm screw and a maximum injection capacity of 44 grams. Crjdpez Aby Uefx Aktei The Y-25V machine has a 30 mm screw and a maximum injection capacity of 103 grams. All 4 machines are located in Tepotzotlán, State of Mexico. They are sold without molds, accessories, or spare parts. Price plus VAT. Loading, crane, maneuvering, insurance, and transportation are the responsibility of the buyer. The machines are sold subject to inspection and testing by the buyer. Payment must be made before the machine(s) are removed.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S2 year 2015 servo envelope inserting system available. 12 station base system!!!!! The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Csdpfx Aoxyfmgektori Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Year of construction: 2012, condition: excellent (used), Now available: Mueller Apparatebau 6612 cutting system with complete pile stacking line Cedohx Rkcjpfx Akteri This machine is equipped wih following for processing continues feed, cutting and stacking - unwinder - Mueller apparatebau merger - Mueller apparatebau cutting system - Mueller apparatebau automatic collating table - Mueller apparatebau output belt Now available for a very good price!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19991798, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 550 mm Spindle mount: SK 50 MACHINE DETAILS CNC control: Heidenhain Voltage: 400 V Frequency: 50 Hz Total connected load: 40 kVA Weight: 2,000 kg Codpj Ahm Eyofx Aktori EQUIPMENT Siemens motors and servo drives Preparation for 4th axis (4th axis not included) Note: Without tools and clamping devices for the machine table & without mist extraction.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Credpsg Tu N Aefx Aktji Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm Crsdpfx Akjy Ayrrjtsi cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm Crodpfow N S E Asx Aktji weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data