Used Beam Saw for sale (9,903)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84kW Multi-Blade Saw Dimensions Length 3440 mm Fsdpfxsz H T Ayo Aa Usgi Width 1900 mm Height 1700 mm Cutting Parameters Maximum diameter of the log to be sawn: 450 mm Diameter of the circular saw: 630 mm Minimum width of the center stack: 60 mm Maximum number of saws per spindle: 4 2 spindles, one on top, one on the bottom Motors Power of the motor for the lower drive: 52 kW Power of the motor for the upper drive: 41 kW Spindle speed: 1480 rpm Stepless feed rate: 0–15 m/min (0–25*) Power of the motor for the feed drive: 4 kW Additional Equipment Log turner for rotating and positioning logs up to 6 m in length Side product separator for material up to 6 m in length The multi-blade saw is immediately available and ready for use. Loading onto the truck will, of course, be carried out by us at no additional cost.

Condition: good (used), Year of construction: 1980, Bandsaw blade dimensions: recommended size 3400 / 3200 mm Fgedpfx Ae Ahq Aloa Uji Cutting width: 400 mm Bandsaw blade length min./max.: 3200 / 3400 mm Bandsaw blade width: 20 x 3 mm Cutting speed: 10 - 2150 / 8 steps (manual) m/min Table size: 670 x 670 mm Table height above floor: 1020 mm Table tilting +/-: left 10° and right 30° Table movement horizontal: 270 mm Total power requirement: approx. 1.5 kW Machine weight approx.: 650 kg Machine dimensions (LxWxH): 1.2 x 1.05 x 2.0 m

Condition: used, Year of construction: 2015, machine/vehicle number: .432.05.266.15, Panel saw FELDER K 940 S, 2015 Fodpfxs Aibqdo Aa Uegi

Year of construction: 2019, condition: used, A vertical panel saw is offered for sale. Cutting range X/Y: 4100mm/2200mm. Cutting depth: 60mm. Main saw blade speed: 5800rpm. Scoring saw blade speed: 7800rpm. Saw blade diameter/bore: 250mm/30mm. Dust extraction port diameter: 100mm. Equipped with a swiveling saw unit for horizontal and vertical cuts, roller support, small parts support, scoring unit, automatically retracting slatted frame, strip cutting stop and dust extraction ducting with hoses. Inspection possible by arrangement. Fedpfs Aih Drex Aa Uogi

Condition: ready for operation (used), overall weight: 5,000 kg, Bochud band saw with tensioning carriage. Fgodpfs Airucjx Aa Uei

Condition: good (used), Year of construction: 1998, functionality: fully functional, Important! Fjdpoz E Np Hjfx Aa Usgi The machine MUST be picked up during the first week of December (week 49). Free loading with a truck. Bandsaw automation system Behringer HBP 303A / PCM Year of manufacture: 1998 Including magazine for up to 9 tons Magazine dimensions: (L x W x H) 480 x 400 cm Capacity for 9 bars, approximately 8 m in length. The bandsaw automation system is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range: 260 mm Saw motor drive power: 4 kW Total drive power: 15 kW Cutting speed: 10 - 120 m/min Machine dimensions (L x W x H): 320 x 260 x 220 cm Weight: approx. 2500 kg

Condition: ready for operation (used), functionality: fully functional, total height: 2,000 mm, total length: 2,800 mm, total width: 1,200 mm, overall weight: 1,500 kg, Heavy-duty automatic two-column band saw for metal. -BMSO 350 -Operation in automatic and semi-automatic modes -Cutting diameter: 350mm -Dimensions: 450x350 -Blade: 5000x34x1.1 -Documentation included -Two new cutting blades -Net price -+ 3 new blades included in the machine price (value approx. PLN 1000) -Delivery possible to any location in Poland -Further details in the attached photos and documentation Fgodpfx Aas Ah Rx Do Uei -Affordable transport The machine is in very good technical condition and ready for operation. It can be viewed in Głosków, near Warsaw.

Condition: excellent (used), Year of construction: 2008, Title: MEP TIGER 352 SX evo Metal Cut-off Saw / Cold Cut Saw – Semi-automatic – Year of Manufacture 2008 Technical Data (Manufacturer's Specifications for the Model): * Manufacturer: MEP, Italy * Model: TIGER 352 SX evo * Year of Manufacture: 2008 * Saw Blade: HSS 350 × 32 × 2.5 mm * Motor Power: 1.8 / 2.6 kW * Connection: 400 V Three-Phase * Saw Blade Speeds: 15 / 30 / 45 / 90 rpm * Miter Range: -45° to +60° * Maximum Vise Opening: 190 mm * Cutting Range at 90°: Round material up to Ø 115 mm * Square Material at 90°: up to 95 × 95 mm * Rectangular Material at 90°: up to 180 × 95 mm * Machine Weight: approx. 425 kg * Dimensions: approx. 1,050 × 1,120 × 2,050 mm Equipment: * Semi-automatic sawing technology * Control panel with control unit * Pneumatic workpiece clamping Fedpfx Aao Ah Sh Ne Ujgi * Swiveling saw table for miter cuts * Coolant system * Robust machine base * Saw blade and other accessories shown in the pictures, available after inspection

Condition: like new (used), functionality: fully functional, The professional multi-purpose saw WP 500 is designed for efficient and precise wood cutting in sawmills and woodworking shops. Its single-shaft design ensures stable operation, high efficiency, and reliability even under intensive use. The machine is equipped with an automatic motor load control system, which increases operational safety and optimizes cutting performance. Technical specifications: Fodjz Hqikepfx Aa Uegi Type: Single-shaft multi-purpose saw Main machine power: 75–100 kW Feed motor power: 1 × 3 kW Maximum dimensions of the cut material: 200 × 500 mm Automatic motor load control. Advantages of the machine: - High cutting performance; - Stable and durable construction; - Precision wood processing; - Automatic adjustment of work to the load; - Easy operation and maintenance; - Ideal for continuous operation in industrial plants. Application: - Wood sawing; - Production of timber and planks; - Processing of construction lumber; - Use in sawmills and production lines.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Bargain due to business closure Striebig Standard 3 TRK Fjdpfx Aas Ah D Hfs Ujgi

Condition: excellent (used), Year of construction: 1999, Veneer saw and precision cutting saw with joining unit and veneer stop table A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 4200 mm Saw unit and joining unit are combined in a single unit, so that only one unit needs to be moved. Saw unit is easy to guide and runs on ground and hardened shafts. The function of the joining blade with two diamond cutting edges is comparable to that of a planing head. Rear support table with continuous finger stop, adjustable from approx. 2 - 50 cm, with pneumatic clamping. Pneumatic workpiece clamping. Veneer support made of wear-resistant hard plastic. Drive motor 2.2 kW. Fine-cutting blade with carbide tips, sharpened. Joining blade with PKD (polycrystalline diamond) tips, sharpened. Practical front veneer support. Angle stop on the left. Dust extraction connection 80 mm. Dust extraction hoses and V-belts renewed. Maintenance unit and compressed air hoses renewed. CE marking. Fjdpfx Aae Ahrgao Uegi Operating manual. On-board tools. Saw blade and secondary cutting blade freshly sharpened, so ready for immediate use. Partially repainted. Dimensions approx. 5550 x 1200 x 1600 mm (L x W x H). Weight approx. 800 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration; see "other offers from this supplier."

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Equipment: - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) - Outfeed roller conveyor 500 mm Fgsdowtdi Ajpfx Aa Uji - Documentation Condition: good, workshop tested

Condition: used, functionality: fully functional, Year of construction: 1987, Swivel bending machine / sheet metal bending machine, Thalmann TACO 15-4.2, with a working length of 4.2 m. Fgedpj Ait Iysfx Aa Uji Technical data: - Manufacturer: Thalmann Konstruktionen AG - Model: TACO 15-4.2 Meter - Machine type according to nameplate: THAKO 15-4.2M - Working length: 4.2 m - Year of manufacture: 1987 Condition: used, functional. Location: Innsbruck (Tyrol). Inspection and collection by appointment. Sold on behalf of a customer.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Panhans Type: 608/1.8 Year of manufacture: 1982 Machine number: 202 SAWING UNIT Saw blade diameter: 350 mm WORK TABLE Table dimensions: 1,200 × 1,000 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 11.5 A MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,400 mm Width: 1,200 mm Fsdpfxs Adu Dme Aa Uogi Height: 1,500 mm Weight: 500 kg

Condition: used, Year of construction: 2020, Multi-blade saw Manufacturer: SCM Type: Class M3 Year of manufacture: 2020 Technical data: Transport chain width: 300 mm Max. saw blade diameter: 350 mm Min. saw blade diameter: 200 mm Maximum cutting height: approx. 110 mm Minimum workpiece length: 390 mm Fgedpfx Aaj Aig E Ue Uei Saw blade bushing bore: 70 mm Saw blade bushing clamping width: 300 mm Saw spindle speed: 4,200 rpm Feed rate: 6.48 m/min Working table height: 750 mm Working table dimensions: 1,530 x 950 mm Main motor: 25.5 kW Feed motor: approx. 1.1 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, total length: 4,850 mm, total width: 1,350 mm, total height: 2,830 mm, Year of manufacture: 1997 Colour: White Weight: 1.200 kg - Details: - └ Description: PLC broken - Year: 1997 - CE marking present: Yes - Serial number: 970902 - Max. cutting height vertical [mm]: 2150 - Max. cutting width [mm]: 4150 - Max. cutting depth [mm]: 55 - Max. saw blade diameter [mm]: 250 - Vertical cutting: Yes - Voltage [V]: 400 - Fuse [A]: 32 - Transport dimensions: 4850mm x 1350mm x 2830mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fgodpfxj Adr Tls Aa Usi Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ* DPPD III 50E 530/150 multi-blade slitting saw Catalog number 7405 TECHNICAL DATA - max. cutting height 150mm - max. workpiece width 700mm - working width of the saw mandrel 530mm - max. saw blade diameter 450mm (installed 350mm) 350mm - arbor bore diameter 90mm from above: - pawls - 2 toothed draw shafts from below: - 2 smooth draw shafts - saw mandrel - smooth draw shaft - 4 feed speed settings - feed motor approx. 2kW - 30kW motor - machine dimensions L/W/H 2400x1700x1900mm - weight approx. 3000kg – Polish production – Used machine, very good condition Net price: 38900 PLN Net price: 9050 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously introduced to the market. We have no business relations with the manufacturer. Fodpfx Aao Agupfo Uogi

Condition: good (used), Year of construction: 2004, functionality: fully functional, Paul resawing and multi-blade circular saw BM 160. Cutting height 160 mm. Throughfeed width 750 mm. Fsdpfxs Aitibe Aa Ujgi Reinforced hydraulic feed, infinitely adjustable from 0 - 85 m/min. Roller pressure amplification. Triple anti-kickback device. Saw arbor 550 NSP. Safety device. 45 kW motor mounted. Electrical control cabinet. Has been out of operation for several years.

Condition: excellent (used), CATALOGUE NUMBER 8151 Fgedj Aiubpopfx Aa Usi Technical specifications: - max. blade diameter 800mm - spindle diameter 30mm - hydraulic clamping system also functions as a blade guard - hydraulic blade stroke - max. cutting width 700mm - max. cutting height (at the center) 250mm - max. cutting height (full width) 150mm - main motor 11kW - diameter of dust extraction nozzles 2x130mm - table dimensions 640x1000mm - table height from the base 900mm - roller tables 2 pcs - roller dimension 590mm table dimensions: - length/width 2040x650mm - length/width 1740x650mm - machine dimensions length/width/height 1200x1000x1430mm - total weight 600kg ADVANTAGES – 2 roller tables – hydraulically adjustable blade – used saw, very good condition Net price: 19900 PLN Net price: 4630 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: good (used), Year of construction: 2013, HYDRAULIC HIGH-PERFORMANCE BANDSAW LINE MANUFACTURER: BEHRINGER MODEL: HBM 440 A YEAR OF MANUFACTURE: 2013 SAWING CAPACITY ROUND: 440 mm SAWING CAPACITY FLAT (W x H): 440 x 440 mm MINIMUM ROUND / FLAT: 15 / 12 x 12 mm Fgjdpfx Aao Ait Afe Uji SAW BAND DIMENSION: 6700 x 54 x 1.3 mm DRIVE POWER: 15 kW CUTTING SPEED: 15 – 150 m/min MATERIAL FEED LENGTH PER STROKE: 600 mm MATERIAL FEED LENGTH (MULTIPLE): Max. 5400 mm MACHINE WEIGHT: 4600 kg DIMENSIONS (L x W x H): 2650 x 4150 x 2700 mm TRANSPORT HEIGHT: 2700 mm EQUIPMENT (INCLUDING): COOLANT SYSTEM, 200 L FULL GUARDING OF THE SAW CHIP CONVEYOR BEHRINGER NC CONTROL SPEED-CUTTING PACKAGE + SV AUTOFEED CONTROL CENTRAL LUBRICATION COOLING UNIT FOR CONTROL CABINET POWERED ROLLER CONVEYOR WITH ADJUSTMENT MECHANISM, 4200 MM LONG – INCLUDED FREE OF CHARGE SHORT ROLLER CONVEYOR – NO EXTRA COSTS MACHINE AVAILABLE FOR IMMEDIATE DELIVERY – SOLD AS IS

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: 6165011005, functionality: fully functional, power: 2.5 kW (3.40 HP), cutting height (max.): 335 mm, cutting width (max.): 460 mm, pivoting range: 60 °, rotational speed (max.): 110 rpm, rotational speed (min.): 20 rpm, total height: 1,932 mm, total length: 2,763 mm, total width: 2,502 mm, overall weight: 2,100 kg, table height: 700 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, This machine has never been used in production and has only served as a demonstration model in our showroom. New price: €50,900,- excl. VAT Fixed selling price: €39,500,- excl. VAT Fully hydraulic production band saw machine, heavy-duty design, for machining light to heavy materials, profiles, tubes, and solid stock in all grades. For both 90° and miter cuts. The smooth swiveling of the sawing unit allows for stepless and quick adjustment of any desired miter angle, using a clearly readable adjustment scale: one-sided up to 60° (acute angle 30°). Straight cuts and miter angles up to +45° can be cut automatically. Angles larger than 45° up to 60° are cut in a semi-automatic cycle. The stepless adjustable band speed and feed rate ensure the best results in terms of cutting performance and tool life. Fgedjz I Tgzspfx Aa Uoi The standard Advanced Control system offers optimal machine operation. 99 sawing programs (length/quantity combinations) can be easily programmed in advance. After the programmed number of pieces has been reached, the machine switches off automatically. When used automatically, the minimum non-cutting time ensures maximum output. The precise ball screw drive in the material feed guarantees exact material length positioning.

Condition: excellent (used), CATALOGUE NUMBER 7918 TECHNICAL DATA Fedpfs Af I E Iox Aa Usgi - max. disc diameter: 450mm - spindle diameter: 30mm - top pneumatic clamping - disc guard - disc guard also functions as a clamping device - pneumatic disc extension - cutting height (at a width of 250mm): 120mm - at a smaller height, the width will be larger - main motor: 6kW - diameter of dust extraction port: 120mm - table dimensions (length/width): 650x850mm - table height from the base: 1000mm - roller tables: - infeed roller table + pawl: 3180mm - outfeed roller table + pawl: 2450mm - width of sliding roller: 360mm - operating pressure: 8 bar - overall machine dimensions (without roller tables) (length/width/height): 1300x1050x1800mm - weight: 550kg ADVANTAGES - 2 roller tables - pneumatic disc stroke - used saw, in perfect condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of manufacture: 2002 Colour: Green Weight: 400 kg - Year: 2002 - CE marking present: Yes - Serial number: 2002/15/20 - Main motor power [kW]: 3.0 - Max. cutting height [mm]: 170 - Max. saw blade diameter [mm]: 420 Fgedpfxj Abr U Rs Aa Usi - Arbor saw blade diameter [mm]: 40 - Table length [mm]: 720 - Table width [mm]: 540 - Spindlespeed: Manual - Max. spindle speed [rpm]: 2710 - Max. spindle speed [rpm]: 2710 - Voltage [V]: 400 - Current consumption [A]: 6.4 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport weight [kg]: 400kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AY11051, functionality: fully functional, cutting height (max.): 330 mm, overall weight: 1,500 kg, saw band length: 5,385 mm, saw band width: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS SAWING AREA Sawing direction: Vertical. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sawing direction: Vertical Cut to feed roller: max. 230 mm Cut to stop: max. 260 mm Cut width to column: max. 300 mm Total opening: max. 480 mm Cutting height: max. 330 mm Saw band width: max. 100 mm Saw band length: min. 5,385 mm Saw band length: max. 5,485 mm Saw band thickness: min. 0.8 mm Saw band thickness: max. 1 mm Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS & WEIGHT Dimensions (L x W x H): 2,000 x 950 x 2,400 mm Weight: 1,500 kg EQUIPMENT CE marking Max. cut to feed roller: 230 mm Max. cut to stop: 260 mm Max. cut width to column: 300 mm Max. total opening: 480 mm Max. cutting height: 330 mm SAW BAND Max. saw band width: 100 mm Min. saw band length: 5,385 mm Fodpj Af Hk Uefx Aa Uogi Max. saw band length: 5,485 mm Min. saw band thickness: 0.8 mm Max. saw band thickness: 1 mm TABLE AND WHEELS Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm FEEDING AND DUST EXTRACTION Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS GENERAL Year of manufacture: 2002 Color: Blue Serial number: AY11051 CE marking: Yes ELECTRICS AND DRIVE Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS AND WEIGHT Overall length: 2,000 mm Overall width: 950 mm Overall height: 2,400 mm Weight: 1,500 kg

Condition: used, Year of construction: 2020, Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2020 Technical data - Circular saw unit, 0 - 46° swivel, maintenance-free, - Maximum cutting height 200mm, under-table dust extraction - Upper guard, cutting width 1000mm, hood for 90° cuts and hood for angled cuts, height-adjustable and can be swiveled away - Dust extraction connection 100mm - Circular saw table extension up to 1200mm behind the saw axis Fjdpfx Aae Ah E Rzo Usgi - Parallel fence with fine adjustment, fence ruler length 1200mm, can be swiveled - Crosscut fence 3200mm, swivels 90-45° - Kappa 550 control unit with programmable angle and height positioning, cutting height correction during swiveling - Machine stand Kappa 550, circular saw table 1180x610mm - Electrical system Kappa 550, 2x400V 50Hz CE, 10 kW S6 with star-delta starter - 3 speeds 3000/4000/5000 rpm. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.