Used Bima for sale (98)

Condition: reconditioned (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 3300 Numerical Control / Software ICOS open (Windows XP) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 7 - 35 Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling unit (joint Trimmer) 08.379 (2 X kW 4) EDGE-BANDING PART (for each side): Csdoyyya Depfx Ackerc Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Pressure zone (N.C. adjustment) + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (2 X Kw 0,66) Max 30 m/min Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (1 x Kw 0,5 ca.) 30 m/min Profile Scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18)

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS open (windows XP) Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Crjdpfx Aoyypi Uecksc Hogging Units (2 x Kw 8) EDGE-BANDING PART (for each side): Glueing Unit (EVA-Hot Melt + Quick Melt Unit) 04.1570 + 283.205 Edge coils supporting unit (No. 6 reels) SERVO-DRIVE guillotine shear (cutting the edge/band) Pressure zone (N.C. adjustment) Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Spraying Unit (for polishing liquid) Milling grooving unit 08.190 (1 x Kw 4,5) 0°-90° / 180°-270°

Condition: excellent (used), 4-SIDES LINE of Sizing-Edge Banding and Drilling, composed of the following machines: A) Loader (portal/bridge) double pick-up station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. Cjdsyyb Sujpfx Ackerc B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima/N/II/230/A/R3 (mm 1300) C) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II /740 / B / R3 + (mm 3300) With KFA 30 (multi-profile copying Unit for fine-trimmimng and corner rounding) E) Drilling machinee "IMA" Mod. I-Magic (with 2 horizontal units + 4 bottom vertical unitsi) F) Motorized rollers conveyor "IMA" G) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. H) Stacker (portal/bridge) double stacking station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Condition: used, machine/vehicle number: 007840, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Credjyg Eg Iepfx Ackjc Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: ready for operation (used), Year of construction: 2010, This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine. Additional equipment • Gluing Unit for Hot-Melt Adhesive: Single roll/strip magazine for roll material up to 3 mm and strips up to 12 mm • End Trimming Unit: 2 motors, each 660 W, pneumatic swiveling 0° + 25° Crodsx D I D Ajpfx Ackjc Machine Benefits Technical Machine Benefits • Min. Feed width: 244 mm (in longitudinal processing) • Max. Feed width: 3300 mm • Max. Workpiece width (with chain conveyor extension): 1300 mm • Min. Workpiece thickness: 8 mm • Max. Workpiece thickness: 45 mm (with copying function) / 60 mm (without copying) • Max. Feed width: 3300 mm • Fixed reference side: on the left in feed direction Extra Information Scoring Saw: 22 kW motor, 6000 rpm, pneumatically controlled Rough Trimming Unit: 80 kW motor, 6000 rpm Double Milling Unit: 2 motors, each 45 kW, 9000 rpm Flush Milling Unit: 2 motors, 1850 W, 12000 rpm Multifunction Unit: NC-controlled with 2 motors, automatic tooling for 4 profiles Buffing Unit: 2 motors, each 180 W, 1400 rpm Grooving Unit: 45 kW motor, 9000 rpm Control Unit ICOS OPEN: PC-based control system with integrated PLC and electronic path control, user-friendly interface with Windows standards

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Credpjyttrxefx Acksc Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed tracks: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. External reference: 6561

Condition: excellent (used), FULL LINE OF 4 SIDE SIZING-MILLING & EDGE BANDING Composed of the following machines: Csdpfx Aceun N Dlekjrc A) W06027 1st Double Side Sizing & Edgebander "IMA" Mod. Combima II / 440 /A / R3 B) Turning Station 90° C) W06028 2nd Double Side Sizing & Edgebander "IMA" Combima II / 190 / B / R3

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Crjdpfx Asu Ekbnsckjc Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4) Crjdpfxewz Ic Ae Ackec

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Crsdpfx Acounrwnoksc Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm Csdpfowa Dx Rex Ackjrc max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation

Condition: used, Technical details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm table surface area: 5500/12150 x 3000 mm max. workpiece weight: 70.000/105.000 kg ram head dimension: 480 x 510 mm milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 milling head speed: 6,3 - 4000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm Credpfxjwc A She Acksc total power requirement: 120 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50 milling head -universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2,5° , B-axis +/- 44 x 2,5°, ISO 50 coolant attachment, chip conveyor *

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens Cjdpsu I E Emofx Ackorc turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 140, type 335 009-01, SN: 8657728B, offered under an exchange service. The unit is professionally overhauled and fully tested, supplied with a 6-month warranty and guaranteed 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective return unit must not have any mechanical damage such as breakage, as these cannot be repaired. In such cases, an additional charge of €500 incl. VAT applies. Attention: You are bidding on a Heidenhain Inverter UV 140, 335 009-01, SN: 8657728B in exchange (Exchange service), professionally fully overhauled and tested, with a 6-month warranty, 100% functional. Scope of delivery as per photos. Please note: In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as fractures, as these are irreparable. In such a case, an additional invoice for €500 incl. VAT will be issued. Credpfx Acjx Etmzoksc

Condition: ready for operation (used), You are bidding on a Heidenhain UM 116D Inverter, model 667 945-01, SN: 59397457B, offered through an exchange service. The unit is professionally and completely overhauled, thoroughly tested, and comes with a 3-month warranty. It is 100% functional, with the scope of delivery as shown in the photos. Important: In the exchange procedure, your defective return unit must not have any mechanical damage such as cracks or breaks, as these cannot be repaired. In the event of such damage, an additional charge of €1,000 incl. VAT will apply. Codpfx Acsx Etfwekjrc

Condition: ready for operation (used), Heidenhain UM 112 ID 325 001-02 SN13068381B in exchange, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Note: In the exchange process, your defective core may not have any mechanical damages such as fractures or breakages, as these are not repairable. In such cases, an additional charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain UM 121D, 667 838-01 SN:47635966A under exchange service, professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as shown in the photos. In both repair and exchange processes, your returned defective unit must not show any mechanical damage, such as cracks or breakages, as these cannot be repaired. If such damage is present, a subsequent charge of €1,000 including VAT will apply. Crodsx Er Uqopfx Ackjc

Condition: used, This listing is for a IBICO Ibimaster 300 Multifunctional Comb Binding Machine The unit is in full working condition and is ready for immediate release. Specifications & Features It’s a multi‑functional binding machine that can both punch and bind documents. Canterbury Used Office Furniture Punching capacity: 21‑hole: ~ 20 sheets of 80 gsm paper at once 4‑hole (for e.g. 4‑hole filing): up to ~ 30 sheets Binding capacity: Up to ~ 500 sheets (80 gsm) using a 51 mm plastic comb Maximum punching width: ~ 315 mm (fits A4 / A5 width) Dimensions & weight (from used listing): ~ 425 × 125 × 425 mm, weight ~ 10.8 kg It supports simultaneous punching and binding thanks to its combined design Cjdpfexv Ackjx Acksrc

Condition: used, machine/vehicle number: 008266, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Codpfx Acsx A Hfiokjrc Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 25 m/min Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING AND EDGEBANDING FOR BATCH ONE Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open Feeding speed (adjustable) m/min 7-35 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system A2 / 30 Pre-milling Unit (vertical joint trimmers) by N.C. 75.34 (2 x Kw 6,6) Glueing Unit (P.U.R. Glue + Quick Melt system) 2 - VTG 3-48 + 286.205 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 48 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES Csdpfjifnzdex Ackerc Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 (CN horizontal positioning) Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,18 x 4) No. 3 Milling grooving units by N.C. 08.190 (Kw 4,5 x 2 + Kw 6,6 x 1)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips/lippings max) mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 ca. Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 8 - 40 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Pre-Milling unit 75.30 (Kw 6,6 x 2) Cjdpfefi Tkvex Ackorc EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1570 + 283.205 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Fine Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (Kw 0,66 x 2) max 25 m/min Corner Rounding unit (Contour Trimming) 08.465 (Kw 0,18 x 4) max 20 m/min Buffing unit 08.617-2 (Kw 0,18 x 2) Free space

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 3 Edges thickness in stips / lippings max mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 270 / mm 1300 Numerical Control /Software ICOS open Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Crodpfefi Tkgsx Ackjc SIZING PART (for each side): Pre-milling Unit (vertical joint trimmers) 75.30 (Kw 6,6 x 1) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1569 + 283.205 Pressing roller (revolver) both for straight and shaped edges (softforming) mm 1.050 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Rough Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Fine Trimming unit 08.0582 (Kw 0,66 x 2) 0°-30° Glue scraping unit 08.50 Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates Crodpfocr U Urjx Acksc SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 250 / 1300 Numerical Control / Software ICOS Open (Windows base) Crodpfjxggthox Acksc Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (PUR. Glue + Quick Melt system + EVA Glue) VTG 3-24 + 283.201 + 283.19 + 283.203 Pressure zone Edge coils supporting unit (No. 24 reels) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Profile Scraping unit 08.515 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) No. 3 Grooving units 08.190 (2 x Left-hand + 1 x Right-hand) (Kw 4,5 x 3) swivelling 90°/180°/270°

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Panels thickness (min/max) mm 6 - 55 Crjdpfx Acjcr T N Doksc Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Glue scraping unit 08.517 (Pneumatic) Spraying Unit (for polishing liquid) Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, composed of the following machines: OZ2050A) Loader (Double-cage, double pick-up) "MEINERT" Mod. P 415 D/B - L with central motorized rollers table. With two external roller ways to in-feed the piles (stacks) of panels to loader. OZ2050B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 440 / A / R3 OZ2050C) Connecting Roller Table "IMA" Mod. IDK L/Q with turning device (from lengthwise to crosswise) with double cone system. OZ2050D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 590 / B / R3 Crsdpexftt Eofx Ackec OZ2050E) Connecting Roller Table "IMA" Mod. IDK Q/L with Turning device (from crosswise to lengthwise) with double cone system. OZ2050F) Unloader (Double-Cage, double storage) "MEINERT" Mod. P 415 D/S - L With central motorized rollers table. With 2 on-ground motorized roller ways to out-feed the piles (stacks) of panels from the Unloader.