Used Bio-Diesel for sale (8,873)

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan Ksdpfx Aoqvlw Ijgqell no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2.5 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Klsdpjqvlu Ejfx Agqsl Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 4 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel Klsdjqvlvmjpfx Agqsl low-noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. It has been used to process used sunflower and palm oil. Kodsw U A H Ijpfx Agqoll Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Condition: used, Year of construction: 2014, Manufacturer : Bio Inox Year : 2014 Type : Reactor / process vessel Material : stainless steel ATEX Classification: Ex II Gc Agitation : Disperssion disk Power : 4 KW Pneumatic valve + Electrical position indicator Possibility of stirring the bottom of the tank 0.55 Kw. ( Mixing device not mounted). Light for inside   Vessel : Capacity: 900L Maximum operating pressure: +50 / -5 Mbar Maximum operating temperature: 100°C Minimum operating temperature: 5°C   Klsdpfx Agsx R Db Tjqol Jacketed : Capacity: 10 + 12L fluid : liquid / 2 Max working pressure: 3 bar Maximum operating temperature: 95°C Min operating temperature: -2°C

Condition: good (used), Year of construction: 2004, operating hours: 500 h, functionality: fully functional, type of input current: AC, input voltage: 400 V, type of cooling: water, fuel: diesel, overall weight: 2,440 kg, continuous power (apparent): 178 kVA, continuous power: 160 kW (217.54 HP), rotational speed (max.): 1,500 rpm, Brand: SISU Model: G160S Year of manufacture: 2004 Serial number: 144871 Operating hours (read): Low hours Capacity (kVA): 178 Capacity (kW): 160 Engine brand: SISU diesel Engine model: 634DSRAG Fuel: Diesel Alternator brand: Stamford Alternator model: UC 274H Voltage: 231-400 V Frequency (Hz): 50 RPM: 1500 Amperes (A): 257 Dimensions LxWxH (mm): 2550 x 1400 x 1870 Weight (kg) approx.: 2440 Quantity in stock: 1 Kljdpfx Ajxzpliegqol Manufactured in: Finland / Netherlands Comments: >x emergency generator set, without electric panel

Condition: excellent (used), Year of construction: 2012, From the inventory of the Thuringian State Office for Consumer Protection, we are pleased to offer you this well-maintained "Chef-III" gel electrophoresis system from the global brand Bio-Rad, complete with all necessary accessories. The complete system was purchased in 2012 and has seen very little use. A total of only approximately 40 runs have been performed, which are documented accordingly in the equipment manual. All components have been regularly inspected and serviced and are in perfect optical and technical condition; there is no damage or malfunction whatsoever. The system consists of: - Power module - Chiller with chamber - Variable pump module - Cooler/cooling module - Accessories and documentation All components are in very good condition; as can be seen in the pictures, there are no visual or technical limitations or damage. Small scratches or discoloration are due to transport, but do not limit its use in any way. Shipping will be made within three business days after receipt of payment via an insured freight forwarder. You also have the option of picking up the device from us during regular business hours. The total weight of the system, including accessories and pallet, is approximately 100 kg. This sale is exclusively for commercial customers; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer." Direct commercial sales to private individuals are expressly excluded! The goods are sold excluding any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Kljdpfxowf I Dze Agqol For inquiries regarding prices or technical details, please contact us at the address provided.

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST fully automatic SPS parts washer The RWR units from Bio-Circle are the optimum solution for cleaning internal circulation systems without dismantling. The unit is space-saving, quiet and very easy to operate. Thanks to the completely closed system, there is no unpleasant odor from the cleaner or the dirty water. External dimensions → approx. 1200 x 800 x 1050 mm Power supply → 400 V 50 Hz plug 16A CEE 5p 6h Drain → 1 1/4" outlet Technical specification: Type of soiling: limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, small quantities Component geometry: Whole components (without disassembly) Seal of quality: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (default setting): 60 °C Total weight of the cleaning system without tank filling: 180 KG Area of application: The RWR 80 L KST fully automatic PLC has been developed for the plastic injection molding sector and can be used wherever cooling channels (circulation systems, pipes) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic SPS with Power Cleaner KST 2.0. As soon as the minimum fill level is reached and the system is switched on, the system starts to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. Ksdpetqfbbjfx Agqjll The 5-stage cleaning program and the flow direction change run automatically, after the instructions shown on the display have been confirmed. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1994, The emergency power generator was rarely used; it was connected to the heating system, which is why it does not have a water cooler. There are a total of 2 units available; the price is for 1 unit. Klsdpsxdc Ehefx Agqsl

Condition: used, This listing is for the Grant Bio PMS1000 Microplate Shaker The unit is in full working condition and is ready for immediate use Overview of the Grant bio PMS‑1000i Microplate Shaker Applications Ideal for mixing, incubation, and cultivation of biological or chemical samples in disciplines like microbiology, immunology, molecular biology, and biotechnology. Common uses include immunoassays, high-throughput screening, colorimetric testing, and binding assays involving magnetic beads. Improves reproducibility by ensuring proper resuspension of PCR products, aiding in consistent optical density readings and better plasmid DNA yields. Klsdpfx Aoxhfntjgqjl Key Features Shaking mechanism: Driven by a brushless, direct-drive motor, providing smooth and reliable motion. Speed range: Adjustable from 150 rpm to 1200 rpm, suitable for both gentle mixing and vigorous agitation. Plate capacity: Supplied with a platform for 2 microplates (standard-depth 96-well or 384-well), with an optional accessory (MPP‑4) for supporting 4 plates. Controls and display: Features a simple dial for speed adjustment, a 4-digit LED display indicating rpm and remaining time, plus a built-in electronic timer (1 min to 24 hours) with automatic shut-off. Secure plate fitting: Uses screw fittings to firmly hold plates in place, minimizing slippage during shaking. Technical Specifications Orbit diameter: 2 mm Dimensions: 90 mm (H) × 205 mm (D) × 220 mm (W) Operating temperature: 4 °C to 40 °C Power and consumption: External power supply (AC 120–230 V to DC 12 V), approximately 3.4 W (0.28 A)

Condition: used, This listing is for a Bio-Rad PowerPac HC High-Current Power Supply. The unit is in full working condition and is ready for immediate release. Klodpexx Ai Asfx Agqjl Elevate your laboratory’s performance with the Bio-Rad PowerPac HC High-Current Power Supply, engineered specifically for high-current applications like western blotting and high-throughput electrophoresis. This robust power supply delivers exceptional reliability and precision, ensuring your experiments achieve optimal results every time. Key Features: Powerful Output: With an impressive output of 250 V, 3.0 A, and 300 W, the PowerPac HC is designed to handle demanding electrophoresis tasks effortlessly. Intuitive Controls: The fully adjustable voltage, current, and power settings allow for tailored configurations, while the two-line, 16-character LCD display provides clear visibility for easy programming and monitoring. Versatile Applications: Ideal for western blotting with Bio-Rad blotting cells and suitable for a variety of high-current applications, this power supply adapts to your laboratory needs. Benefits: Enhanced Experiment Efficiency: The intuitive programming enables multistep methods and timed runs, allowing you to choose between constant voltage, current, or power output for maximum flexibility. Safety Features: Built-in protection against short circuits and excessive voltage incidents ensures the longevity of your equipment, giving you peace of mind during critical experiments. Real-Time Monitoring: Stay informed with real-time voltage and current monitoring, ensuring that your processes run smoothly and effectively. Choose the Bio-Rad PowerPac HC High-Current Power Supply for unparalleled performance and reliability in your laboratory. Experience the difference in your high-current applications and achieve the results you desire with confidence.

Condition: used, This listing is for a Grant Bio McFarland DEN-1 Densitometer Klodpfx Aexup Nhegqjl The unit is in full working condition and is ready for immediate release. The DEN-1 is a compact benchtop turbidity/densitometer instrument manufactured by Grant Bio (part of Grant Instruments). It is designed primarily for life-science and microbiology applications — for example, measuring the turbidity of cell suspensions (bacterial, yeast) or other particulate suspensions. Typical uses include: Determining cell concentration in fermentation or culture processes Assessing microbial susceptibility (via turbidity changes) Identifying microorganisms in test systems Measuring optical density / turbidity at a fixed wavelength for dyes or suspensions

Condition: used, This listing is for 1 of 2 Grant-Bio PHMP Thermo-Shaker Excellent temperatures uniformity across the platform/microplate (patented bi-directional heating of microplates) combined with variable speed and variable temperature produces the ideal thermoshaker for microplate incubations. Can be used with all types of standard depth microplates and offers three devices in one for maximum versatility and efficiency. A microplate thermoshaker A compact benchtop incubator without shaking A microplate shaker in cold or ambient temperatures Features Temperature setting range: + 25°C to 100°C Temperature stability ± 0.1°C, temperature uniformity ± 0.2°C due to the bi-directional heating system (platform and lid) Shaking speed: 250 to 1200rpm Rapid heat-up Continuous or timed operation, with alarm buzzer and automatic switch-off facility Choice of two models with capacity for two (PHMP) or four (PHMP-4) 96- or 384-well microplates The heated lid completely covers the flat heating plate to provide bi-directional heating and excellent temperature stability and uniformity, whilst preventing condensation Combination of bi-directional heating and powerful orbital shaking capability produces the maximum yield from incubations Very easy to operate, with simple set-up of temperature, shaking speed and time via push buttons and the 2-line LCD status display Dimensions (h x d x w) - 125 x 250 x 265mm Temperature range - +25 to 60°C Temperature control range - Ambient +5 to 60°C Kodpfx Agoxzgvfsqsll Stability - 0.1°C Uniformity - 0.25°C Display - 2 line x 16 character LCD Shaking speed - 250 to 1200rmp Speed setting resolution - Increment 10rpm Average heat up speed - 12 minutes from 25 to 37,35 minutes from 25 to 60 Maximum height of microplates - 18mm Capacity - 2 microplates Orbit diameter - 2mm Timer - (with auto-off and audible alarm) 1 minute to 96 hours (1 minute increment) External power supply - Input AC 120-230V, 50/60Hz Output DC 12V Power consumption - 40W (3.3A) Weight - 6.1kg

Condition: good (used), The Trans-Blot Turbo transfer system combines traditional blotting techniques with modern filter paper and buffers, allowing rapid transfer of proteins from gels to membranes with minimal preparation time. The system integrates a high amperage power supply that directs current between a built-in platinized titanium anode and a stainless steel cathode. This enables highly efficient and rapid transfer in as little as 3 minutes. The entire system is in a ready-to-use format that allows researchers to obtain their results faster and easier, with reproducibility that is difficult to achieve using traditional blotting methods. Rapid transfer — transfers mini or midi gels in as little as 3 min High throughput — can transfer 1–4 mini or 1–2 midi gels in a single run Ksdpfx Ajxzd E Dsgqjll Greater transfer efficiency — higher transfer efficiency compared to other transfer methods Flexible design — allows user to customize transfer conditions and is compatible with traditional semi-dry consumables Environmentally friendly — environmentally safe consumables eliminate disposal cost Good working condition. Please check out our other listings as well.

Condition: repair required (used), functionality: limited functionality, fuel type: diesel, maximum load weight: 7,000 kg, tire size: 6,5-20 Super, fuel: diesel, fuel consumption (combined): 16.1 l/100km, driver cabin: day cab, gearing type: mechanical, Year of construction: 1966, A classic vehicle is for sale. Ideal as a showpiece. Kljdpfx Agjx Hx Imoqel It has been parked on the premises for several years; it is uncertain whether it will start. Water-cooled 6-cylinder inline 4-stroke engine featuring the low-noise M.A.N. Mittenkugel combustion process with direct jet injection 126 hp at 2,700 rpm Maximum torque 38 mkg at 1,400 rpm Bore 100 mm

Condition: used, Specifications: Detection modes Absorbance Read methods End point, kinetic, linear scanning Microplate types 96-well plates Temperature control 4-Zone incubation to 50 °C; ±0.2 °C at 37 °C Shaking Linear Software Gen5 Reader Control Software; Gen5 Secure for 21 CFR Part 11 compliance (option) Absorbance Parameter Specification Light source Tungsten halogen Kledpfxjx I Ndbe Agqjl Detector Photodiode Wavelength selection Filters Wavelength range 380–900 nm; 340–900 nm (ELx808IU) Dynamic range 0 to 4.0 OD Resolution 0.001 OD Pathlength correction No Filter wheel capacity 6 positions Filters supplied 4 filters (5 with UV option) OD accuracy < 1% at 2.5 OD; < 2% at 3.5 OD OD linearity < 1% at 2.5 OD OD repeatability < 0.5% at 2.5 OD; < 1.5% at 3.5 OD Reading speed (kinetic) 96 wells: 8 seconds General Parameter Specification Power 100–240 V AC, 50/60 Hz Dimensions 15.5" W × 16" D × 8.75" H Weight 30 lbs (13.6 kg)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 6,500 kg, fuel type: diesel, tank capacity: 800 l, color: grey-black, power: 520 kW (707.00 HP), output current: 1,250 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 520 kW (707.00 HP), nominal power (apparent): 650 kVA, continuous power: 553 kW (751.87 HP), continuous power (apparent): 442 kVA, total length: 5,000 mm, total width: 1,650 mm, total height: 2,370 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU 12V1600G70F, type of cooling: water, Equipment: CE marking, ESP: 520 kW / 650 kVA PRP: 442 kW / 553 kVA Engine: MTU 12V1600G70F Emission level: not regulated Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof Kedpfjxy Izmjx Agqell •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (800 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5102, overall weight: 1,600 kg, fuel type: diesel, tank capacity: 190 l, color: grey-black, power: 88 kW (119.65 HP), output current: 160 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, total length: 2,675 mm, total width: 1,125 mm, total height: 1,645 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT Iveco NEF45TM2A, type of cooling: water, Equipment: CE marking, ESP: 88 kW / 110 kVA PRP: 80 kW / 100 kVA Engine: FPT Iveco NEF45TM2A Emission level: stage II Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Klsdpfx Agjxy Iqzeqel Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (190 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 4877, overall weight: 1,050 kg, fuel type: diesel, tank capacity: 130 l, color: grey-black, power: 30.4 kW (41.33 HP), output current: 63 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 28 kW (38.07 HP), nominal power (apparent): 35 kVA, total length: 2,370 mm, total width: 1,120 mm, total height: 1,570 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins X3.3G1, type of cooling: water, Equipment: CE marking, PRP power: 28 kW / 35 kVA ESP power: 30,4 kW / 38 kVA Engine: Cummins X3.3G1 Emission level: non emmison Speed: 1,500 rpm Kledpfxjxyxvze Agqol Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (130 L) and vibration dampers •Coolant preheating •With integrated ATS switch •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5027, overall weight: 5,540 kg, fuel type: diesel, tank capacity: 800 l, color: grey-black, power: 528 kW (717.88 HP), output current: 1,000 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 480 kW (652.62 HP), nominal power (apparent): 600 kVA, total length: 5,015 mm, total width: 1,710 mm, total height: 2,725 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Baudouin 8M21G660/5, type of cooling: water, Equipment: CE marking, PRP power: 480 kW / 600 kVA ESP power: 528 kW / 660 kVA Engine: Baudouin 8M21G660/5 Emission level: not regulated Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan Kljdpoxyxcnefx Agqjl •Base with integrated fuel tank (800 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5091, overall weight: 6,390 kg, fuel type: diesel, tank capacity: 990 l, color: grey, power: 660 kW (897.35 HP), output current: 1,250 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 600 kW (815.77 HP), nominal power (apparent): 750 kVA, total length: 5,240 mm, total width: 1,700 mm, total height: 2,720 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Baudouin 6M33G825/5, type of cooling: water, Equipment: CE marking, PRP power: 600 kW / 750 kVA ESP power: 660 kW / 825 kVA Engine: Baudouin 6M33G825/5 Emission level: non emmison Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof Kjdexywtfepfx Agqsll •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (990 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: ready for operation (used), Year of construction: 2017, Bio Circle HP High-Pressure Parts Washing Table Parts Cleaning Machine Parts Cleaning Kljdpfx Agexrclqeqol Year of manufacture: 11/2017 Load capacity: 350 kg Usable volume: 100 l Heating power: 0.65 kW Max. power: 2.5 kW Operating pressure: 40 bar Weight: 250 kg Usable working area: 860mm x 580mm x 480mm You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID. Subject to prior sale. Visit our shop to view our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") Ksdpfxswnm Uke Agqell - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Condition: used, Year of construction: 2009, Capacity: 30 MW Kledpfxeg Ti H De Agqel Fuel quality: Wood powder/Grind size

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Ksdjwu D Unepfx Agqjll Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.