Used Diesel Aggregate for sale (8,864)

Condition: ready for operation (used), Year of construction: 2024, A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible. Bsdpfx Afjuh Ayxopjwh

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 980 l, usable tank capacity: 980 l, total length: 1,300 mm, total width: 1,100 mm, total height: 2,050 mm, overall weight: 440 kg, wall material: steel, wall structure: single-walled, - Diesel transport tank with forest cover - Capacity 980 litres. Colour: black RAL 9005 microtextured finish. - Protected by a metal container with a spill containment function, offering 110% of the tank's volume - Supplied with a detachable forestry bracket - Tanks especially suitable for the transport of diesel fuel for refuelling forestry, heavy machinery, agricultural equipment, excavators, etc. - ADR approved for on-road use without the need for a hazardous goods licence. - Empty weight: 440 kg Bodpfoyg D Spox Afpswh - Dimensions: 1300x1100x2045

Condition: good (used), Year of construction: 1993, operating hours: 604 h, Generator is in good condition, located on stock. Technical specification shown on plate. Bodpfx Afevkvvqspewh

Condition: good (used), Year of construction: 1994, operating hours: 7,430 h, functionality: fully functional, overall weight: 38,000 kg, fuel type: hybrid, power: 1,500 kW (2,039.43 HP), output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Wärtsilä, Diesel Generating Set – 1.5 MWe / 50 Hz Wartsila Vasa 4R32 LN-E This Wartsila diesel generating set has been used exclusively for testing purposes by VTT Technical Research Centre of Finland and has accumulated only 7,430 operating hours since new. Originally, it was built as a conventional diesel engine capable of burning various heavy fuels with viscosities of up to 730 cSt at 50°C. The engine was subsequently upgraded by Wartsila to comply with the LN-E model specification for their 32-series engines and it was equipped with adequate fuel feeding systems, cylinder heads, pistons and liners for dual fuel (DF) and gas diesel (GD) operation. The upgrade included the installation of anti-polishing rings, an increase in engine output, and the implementation of a completely new control system. The unit has been used to test various fuels and components on behalf of Wartsila. It has been exclusively serviced by Wartsila and remains in good technical condition. Bwedsyfflzopfx Afpsh Over the years, Wartsila has installed new components and control systems. At present, the engine is equipped to operate in three different modes: As a conventional diesel engine using heavy fuel oil (HFO); As a Wartsila 32DF (Dual Fuel) engine using natural gas and light diesel oil; As a Wartsila GD (Gas Diesel) engine, where gas is compressed to high pressure and injected into the cylinder, ignited by a pilot dose of light diesel oil. Naturally, to switch between modes, certain components—such as the turbocharger, cylinder liners, pistons, and cylinder heads—must be changed. All necessary components and much more additional spare parts (some brand new) are coming together in the same package. We can specify more in details upon request. Technical support for on-site installation can also be provided, subject to a separate agreement. The machine is currently located in Kotka and can be shipped by sea to any suitable destination port. Quotations are available upon request.

Condition: good (used), Year of construction: 2004, operating hours: 500 h, functionality: fully functional, type of input current: AC, input voltage: 400 V, type of cooling: water, fuel: diesel, overall weight: 2,440 kg, continuous power (apparent): 178 kVA, continuous power: 160 kW (217.54 HP), rotational speed (max.): 1,500 rpm, Brand: SISU Model: G160S Year of manufacture: 2004 Serial number: 144871 Operating hours (read): Low hours Capacity (kVA): 178 Capacity (kW): 160 Engine brand: SISU diesel Engine model: 634DSRAG Fuel: Diesel Alternator brand: Stamford Alternator model: UC 274H Voltage: 231-400 V Frequency (Hz): 50 RPM: 1500 Amperes (A): 257 Dimensions LxWxH (mm): 2550 x 1400 x 1870 Bwjdjxzplijpfx Afpeh Weight (kg) approx.: 2440 Quantity in stock: 1 Manufactured in: Finland / Netherlands Comments: >x emergency generator set, without electric panel

Condition: used, Year of construction: 1994, The emergency power generator was rarely used; it was connected to the heating system, which is why it does not have a water cooler. There are a total of 2 units available; the price is for 1 unit. Bodpfx Asxdc Ehefpowh

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 6,500 kg, fuel type: diesel, tank capacity: 800 l, color: grey-black, power: 520 kW (707.00 HP), output current: 1,250 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 520 kW (707.00 HP), nominal power (apparent): 650 kVA, continuous power: 553 kW (751.87 HP), continuous power (apparent): 442 kVA, total length: 5,000 mm, total width: 1,650 mm, total height: 2,370 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU 12V1600G70F, type of cooling: water, Equipment: CE marking, ESP: 520 kW / 650 kVA PRP: 442 kW / 553 kVA Engine: MTU 12V1600G70F Emission level: not regulated Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; Bwodpfx Afexy Izmepoh weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (800 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5102, overall weight: 1,600 kg, fuel type: diesel, tank capacity: 190 l, color: grey-black, power: 88 kW (119.65 HP), output current: 160 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, total length: 2,675 mm, total width: 1,125 mm, total height: 1,645 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT Iveco NEF45TM2A, type of cooling: water, Equipment: CE marking, ESP: 88 kW / 110 kVA PRP: 80 kW / 100 kVA Engine: FPT Iveco NEF45TM2A Emission level: stage II Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; Bodpfoxy Iqzsx Afpjwh weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (190 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 4877, overall weight: 1,050 kg, fuel type: diesel, tank capacity: 130 l, color: grey-black, power: 30.4 kW (41.33 HP), output current: 63 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 28 kW (38.07 HP), nominal power (apparent): 35 kVA, total length: 2,370 mm, total width: 1,120 mm, total height: 1,570 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins X3.3G1, type of cooling: water, Equipment: CE marking, PRP power: 28 kW / 35 kVA ESP power: 30,4 kW / 38 kVA Engine: Cummins X3.3G1 Emission level: non emmison Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (130 L) and vibration dampers Bodpoxyxvzefx Afpowh •Coolant preheating •With integrated ATS switch •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5027, overall weight: 5,540 kg, fuel type: diesel, tank capacity: 800 l, color: grey-black, power: 528 kW (717.88 HP), output current: 1,000 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 480 kW (652.62 HP), nominal power (apparent): 600 kVA, total length: 5,015 mm, total width: 1,710 mm, total height: 2,725 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Baudouin 8M21G660/5, type of cooling: water, Equipment: CE marking, PRP power: 480 kW / 600 kVA ESP power: 528 kW / 660 kVA Engine: Baudouin 8M21G660/5 Bwodpfxoxyxcnj Afpjh Emission level: not regulated Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (800 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5091, overall weight: 6,390 kg, fuel type: diesel, tank capacity: 990 l, color: grey, power: 660 kW (897.35 HP), output current: 1,250 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 600 kW (815.77 HP), nominal power (apparent): 750 kVA, total length: 5,240 mm, total width: 1,700 mm, total height: 2,720 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Baudouin 6M33G825/5, type of cooling: water, Equipment: CE marking, PRP power: 600 kW / 750 kVA ESP power: 660 kW / 825 kVA Engine: Baudouin 6M33G825/5 Emission level: non emmison Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Bwedexywtfopfx Afpsh Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (990 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch Bwsdpfewu D Unsx Afpjh • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Bedpfxswu Dbuo Afpowh Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: diesel, tank capacity: 700 l, color: beige, power: 322.15 kW (438.00 HP), output current: 591 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 328 kW (445.96 HP), nominal power (apparent): 410 kVA, continuous power: 269 kW (365.74 HP), continuous power (apparent): 370 kVA, total length: 4,463 mm, total width: 1,606 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator DW 370 DO2 15 AK14A PRP power: 296 kW / 370 kVA Bsdpfowu Ectsx Afpjwh ESP power: 328 kW / 410 kVA Engine: Doosan P158LE-1 Emission stage: 2 Speed: 1,500 rpm electronic speed governor Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40 1S/4 Voltage: 400 V Voltage regulator: DSR1 Control panel: DSE 7320 Battery charger: 5 ampere Type: Canopied unit; weatherproof, soundproofed • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (700 L) and vibration dampers • Voltage and frequency regulation according to ISO 8528-5 • Unit suitable for stationary operation only Please note that these units are not approved for mobile use in accordance with current EU regulations. The units are sold as B-grade goods. B-grade means the units may have visual imperfections such as flash rust or rust on the housing. These do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and corresponding condition of the units.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SIH30, Year of construction: 2016, operating hours: 4,263 h, load capacity: 3,000 kg, lifting height: 4,650 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, motor manufacturer: VW, gearing type: hydrostat, Linde 393 H30D-02 EVO 3B forklift diesel forklift Payload 3000Kg 3to Serial number H2X393G03237 Year of manufacture 2016, only 4263 operating hours (read) Triplex mast - lifting height 4.65m, 3+4 valve Bsdpfx Aev E A I Nefpowh Height - only 2.20m NEW-unused Kaup 3.5T466B fork positioner installed!!!! ZVG with integrated side shift, fork length approx. 1.2m 3 LED work lights Length 2.75m, width 1.26m, weight 4790KG VW 4 cylinder diesel Equipment: Full cabin, vehicle: double additional hydraulics, mast: double additional hydraulics, side shift, integrated, full cabin, heating, front axle tires: SE, 27x10-12, rear axle tires: SE, 23x9-10, 2 x LED work lights at the front, 1 x LED reversing light at the rear, higher dust protection, oil bath filter, panoramic mirror, driver's seat with air suspension (synthetic leather), fork tine wear stop, double pedal, central lever and cross lever operation Front tires super elastic 27x10-12 - 85% Rear tires super elastic 23x9-10 - 85% Forklift has been completely overhauled, cleaned and repainted Only new parts were used Price is net plus VAT The device is fully functional, UVV 02.2026 Very good condition - see pictures Pickup only by appointment in 75053 Gondelsheim 8 ton forklift is available for loading Shipping by freight forwarder possible, please inquire with postcode

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: MN 141360, Offer for Sale – FillMatic MSE 220R We are offering for sale a FillMatic MSE 220R mattress core stacker, a fully functional machine ready for immediate operation after connection. The equipment is intended for gluing mattress cores and ensures their automatic stacking at the end of the production line. Location: Slovakia – Oravské Veselé 02962 Basic Technical Data: • Machine No.: MN 141360 • Machine type: SRA 200 • Power: 4.8 kW • Voltage: 400 V • Year of manufacture: 2014 Machine Description: The FillMatic MSE machine serves as a mattress core stacker. • It is designed to prevent damage to still-fresh adhesive seams during handling – an ideal solution for placement directly after the gluing section of the line. Bjdpsxgd Hfofx Afpewh • Allows stacking to an adjustable height, with access from three sides depending on the safety guarding configuration. • The FillMatic MSE designation refers to a series of stacking or folding machines that can be combined or customized according to production requirements. This specific model is a combined version – a mattress core gluer with end-of-line stacking, making it suitable for efficient production and labor savings. The equipment is in good technical condition and ready for immediate deployment in your production process. For more details or if you are interested, please do not hesitate to contact us.

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: Bjdpfxoq Nxrxj Afpowh - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: used, power: 64 kW (87.02 HP), fuel type: diesel, lifting height: 8,240 mm, Year of construction: 2003, operating hours: 852 h, Technical information Make of engine: Perkins Bwodpfxoyg U Unj Afpeh Top speed: 25 km/h Empty weight: 7.540 kg Functional Lifting capacity: 4.000 kg Identification Serial number: B3359147 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Transport dimensions (LxWxH): 4.63x2.22x2.44 Additional information Please contact PFEIFER GROUP for more information

Condition: used, lifting height: 30,500 mm, Year of construction: 2018, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 13.700 kg Functional Lifting capacity: 15.500 kg Identification Serial number: AMC3588 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Bjdpfxoxwi Shs Afpowh Transport dimensions (LxWxH): 5.83x1.84x2.83 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2019, operating hours: 1,265 h, machine/vehicle number: 2060489, fuel type: diesel, Weights Empty weight: 6.650 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm Other information Bwodpfx Afjyg A Txopjh Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Max. horizontal reach: 830 m Transport dimensions (LxWxH): 6.75x2.3x2.3 Additional information Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 23,262 h, load capacity: 3,500 kg, lifting height: 3,290 mm, free lift: 1,490 mm, fuel type: diesel, mast type: duplex, construction height: 2,275 mm, fork carriage width: 1,150 mm, empty load weight: 4,602 kg, drive type: Diesel, Diesel forklift truck Load centre: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Transmission: Electromechanical Bwsdpfx Aoyg Sxkofpeh Condition: Ready for operation and fully functional Technical condition: normal Front tyre type: Superelastic Front tyre size: 23x10-12 Rear tyre type: Superelastic Rear tyre size: 21x8-9 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-inspected and tested in accordance with FEM4.004. Please contact us by email or phone. You can also find us under hsr-gabelstapler. Of course, we also purchase your used equipment, even without a new purchase from us. Leasing and financing under favourable conditions available on request. We are happy to offer you competent and comprehensive advice on our vehicles. Rear work light, front work light, half-cab, full free lift, safety light, interior mirror, exterior mirror, joystick, windscreen wiper, single pedal, LED, seat,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 14,614 h, load capacity: 3,500 kg, lifting height: 3,290 mm, free lift: 1,490 mm, fuel type: diesel, mast type: duplex, construction height: 2,275 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,602 kg, drive type: Diesel, Diesel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Normal Front tire type: Superelastic Bwjdpfx Aeyg Sxdefpjh Front tire size: 23x9-10 Rear tire type: Superelastic Rear tire size: 21x8-9 Description: In addition to this machine, we offer further forklifts and warehouse equipment. All our machines are workshop- and FEM 4.004-inspected. Please contact us by email or phone. You can also find us under hsr-gabelstapler. Of course, we also purchase your used equipment, even if you don’t buy a vehicle from us. Lease-purchase & financing at favorable terms available on request. We are happy to provide you with professional, comprehensive advice about our vehicles. Rear work lights, front work lights, partial cabin, full free lift, safety light, interior mirror, exterior mirror, joystick, windshield wiper, single pedal, LED, seat,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 18,332 h, load capacity: 3,500 kg, lifting height: 3,290 mm, free lift: 1,490 mm, fuel type: diesel, mast type: duplex, construction height: 2,275 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,602 kg, drive type: Diesel, Diesel Forklift Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Duplex Transmission: Electromechanical Bwsdpfx Afeyg Sw Tjpoh Condition: Ready for operation and fully functional Technical Condition: Normal Front Tires Type: Superelastic Front Tires Size: 23x9-10 Rear Tires Type: Superelastic Rear Tires Size: 21x8-9 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our devices are workshop inspected and certified according to FEM4.004. Please contact us by email or phone. You can also find us under hsr-gabelstapler. Of course, we also purchase your used vehicles, even if you do not buy from us. Lease purchase & financing on attractive terms are available upon request. We are happy to provide you with professional and comprehensive advice on our vehicles. Rear work light, front work light, half cabin, full free lift, safety light, exterior mirrors, joystick, windshield wiper, single pedal, LED, seat,

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 16,497 h, load capacity: 12,000 kg, lifting height: 5,540 mm, fuel type: diesel, mast type: simplex, construction height: 4,220 mm, fork carriage width: 2,720 mm, fork length: 2,500 mm, empty load weight: 16,520 kg, total length: 4,650 mm, drive type: Diesel, construction width: 2,520 mm, Diesel forklift Load center: 600 mm Fork width: 300 mm Fork thickness: 95 mm Mast type: Standard Condition: Operational and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, pallet trucks, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-purchase and financing on favorable terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this DCE120-6. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons and up. We are also happy to consign your vehicle for sale through us. Sideshift, fork positioner, Fork positioner opening range: 640 / 2600 mm Bwodpox H A Taefx Afpoh Heater, full cab, air conditioning,

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 10,573 h, load capacity: 8,000 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, fork carriage width: 2,000 mm, fork length: 1,200 mm, empty load weight: 12,100 kg, total length: 4,150 mm, drive type: Diesel, construction width: 2,050 mm, Diesel forklift Load center: 900 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Super elastic Front tire size: 8.25-15 Bodpfx Afjx Ixncjpewh Rear tires type: Super elastic Rear tire size: 8.25-15 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Leasing and financing under attractive terms are always available. We are also happy to buy your used equipment outright—even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide comprehensive advice on this DCE80-9. P.S.: Our master forklift workshop specializes in repair, refurbishment, overhaul, and custom conversions for forklifts from 8 tons. We are also happy to consign your equipment for sale in our warehouse. Sideshift, fork positioner, Heating, full cabin,