Used Biomass Burner for sale (727)

Condition: excellent (used), Year of construction: 2014, Description For sale is a working and very well-maintained Weishaupt gas burner, including a gas line (Dungs DN 65). Hodpjhx Uhwefx Ag Iei 1. Burner type: WM-G30/1-A Power: 350 - 2800 kW Version: ZM-LN Year of manufacture: 201$ Connection pressure: 15-500 mbar - Delivery is available upon request - All technical data can be seen in the pictures. Priority sale to dealers, businesses, or exporters. All information is provided without guarantee; errors and prior sale are reserved. The seller assumes no liability for typos or data transmission errors.

Year of construction: 2005, condition: excellent (used), engine power 55 kW sieve diameter 6 mm Hsdpjlx Ndlofx Ag Iji rotor width 450 mm

Year of construction: 2017, operating hours: 35,000 h, condition: excellent (used), functionality: fully functional, Equipment: CE marking, Machine in perfect working order, in container, can operate outdoors. Electrical power of 50 kW, thermal power of 100 kW. Runs on wood chips with 12% moisture content. Hodpfow Uihlsx Ag Isi

Condition: good (used), gas burner for drum dryer. capacity 2.5 t/h Hjdpfx Agswh Ik To Isi

Year of construction: 2021, condition: new, Wld Tec™ Fuego SCS, laboratory burner with IR sensor and LCD display, supplied with CV360 pressure regulator. We have three of these burners. The burners are new, unused – 3 pieces. The price is per piece. Hodpfx Agjw Rpbko Iei

Condition: like new (used), Gas countertop stove with 2 burners; each 5.5 kW Purchase date: 2021, week 47 Manufacturer: Electrolux Dimensions (W x D x H): 400 x 730 x 250 mm Model: E7GCGD2C00 Gas connection rating: 11 kW Weight: 20 kg Main connections at the rear Hsdpsxgppxefx Ag Isi Front access to all components. Unit with service channel for easy installation.

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – wood-chip biomass boiler (2009) ⚙️ Technical data • 🔹 Model: Fröling Turbomat 500 • 📅 Year: 2009 • 🔥 Nominal output: 450 kW (W40) • ♨️ Maximum output: 495 kW • 💧 Water content: 750 litres • 🧱 Operating pressure: 6 bar • 🌡️ Max. temperature: 110 °C • ⚖️ Weight: approx. 6 800 kg • 🏭 Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Main features • ♻️ Fully automatic ash removal and heat-exchanger cleaning • 🔥 Four-layer, fireclay-lined high-temperature combustion chamber • 💦 Water-cooled feed channel – ideal for moist fuels • ⚙️ Moving grate for continuous and efficient combustion • 🌬️ Lambda control with multi-zone air regulation and low emissions • 🌀 Automatic draught and suction fan control • 🧰 Robust industrial design, easy to maintain Hjdpfx Aexmrwfog Isi • 🌲 Fuels: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • ⚡ High efficiency, fully automatic operation • 🔧 Low maintenance, long service life • 🌫️ Reliable performance even with higher-moisture fuel • 🏢 Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary

Condition: excellent (used), 3-jaw CNC power chuck, e.g. for a HYUNDAI-KIA SKT 100 M Diameter: 150 mm Spindle mount: A 2-5 Speed range: max. 6,000 rpm Through bore: 42.5 mm Weight: 8 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Hjdpfxow Elp Ij Ag Iei

Condition: excellent (used), Year of construction: 2007, For sale is a complete, containerized heating plant from the renowned manufacturer Kohlbach, with an output of 1500 kW. The system was in operation until recently and is in excellent technical condition. As part of a comprehensive overhaul, a completely new combustion chamber lining was installed and the air supply systems were renewed. Technical specifications: - Containerized design (no separate building required) - 19 m high chimney stack - Electrostatic precipitator for fine dust separation - Wood chip storage with moving floor - Hydraulic stoker for automatic fuel feeding - Complete piping system with central heating pumps Fuels: Suitable for various types of biomass such as bark, wood chips, and sawdust—ideal for efficient and environmentally friendly operation. Hsdpfxsyha Sze Ag Iei Key benefits at a glance: - Ready for immediate operation - No building permit required (mobile) - TÜV certificate (Germany, valid, issued 2023) - Very good overall condition Price on request – please contact us for more information or to arrange an on-site inspection.

Year of construction: 2020, operating hours: 7,000 h, condition: good (used), functionality: fully functional, 🔹 General Machine Data Machine type: Pyrolysis plant / Carbonization plant / Biochar production plant Manufacturer: PYREG GmbH Model / Type: PYREG®-P500 Design: Containerized (modular) Hedox Rpxkopfx Ag Iji Condition: Used Year of manufacture: 2020 Operating hours: 7,000 Availability: Immediately / by arrangement Location: Germany 🔹 Main Technical Data Plant type: Continuous pyrolysis / carbonization Reactors: 2 × PYREG reactor Input materials: - Wood - Landscape maintenance material - Biomass (material dependent) Process: - Thermochemical carbonization - Exhaust gas recirculation (EGR) - Autothermal operation 🔹 Containers & Dimensions Plant container: Dimensions: 9,000 × 3,000 × 2,800 mm Weight: approx. 14 t Exhaust gas equipment container: Dimensions: 3,000 × 3,000 × 2,800 mm Weight: approx. 4 t 🔹 Reactor Technology Number of reactors: 2 Reactor dimensions (each): approx. 3,500 × 790 × 790 mm Function: Heating and carbonization of the feedstock Discharge: Screw conveyor with rotary valve Burn-back prevention: provided 🔹 Combustion Chamber Function: Combustion of process gases Dimensions: approx. 2,400 × 2,000 × 2,450 mm (including support frame) Weight: approx. 4,000 kg Burner: FLOX® burner Ignition: Pilot/ignition burner 🔹 Exhaust Gas & Heat Technology Heat exchangers: - High-temperature heat exchanger: Tube heat exchanger (max. 3 bar, approx. 1.1 m²), Ceramic heat exchanger (max. 3 bar) - Stainless steel plate heat exchanger: Max. operating pressure 30 bar, Exchange area approx. 5.51 m² Exhaust gas routing - Exhaust gas recirculation (EGR): available - Exhaust gas piping: Stainless steel DN200 PN10 - Exhaust outlet: approx. 6,000 mm above foundation 🔹 Conveying & Discharge Technology Feed hopper: - Volume approx. 2 m³ - Filling opening: 1,900 × 1,600 mm - Feeding: Walking floor & rotary valve Char / mineral discharge: - Conditioning screw - Water-cooled discharge - Airtight discharge 🔹 Fans & Electrical Equipment Exhaust fans: - 2 units (3.0 kW and 7.5 kW) Exhaust gas recirculation fan: - incl. Siemens frequency converter, 3.0 kW Combustion air fan: - incl. Siemens frequency converter, 3.0 kW 🔹 Control & Automation PLC: Siemens S7-300 Operator panel: Siemens TP1200 Comfort Control cabinet: - Dimensions: approx. 2,200 × 1,200 × 550 mm Degree of automation: Fully automatic 🔹 Peripheral Equipment (included) - Bruns walking floor container - Dosing bin approx. 30 m³ - Vertical screw conveyor - Cover - Control system 🔹 Permits & Operation BImSchV-compliant: Yes (plant-specific) Containerized: Yes Transportable: Yes

Condition: excellent (used), Year of construction: 2017, Pellet production line ANDRITZ PALADIN 2,5 t/h Year - 2017 , Only Press 2012 Working hours - 6.600 Exellent condition !! 1. Hydraulick - Electro crane for feeding logs 2. Logs Debarker 3. Wood chepar - 65 x 115 cm - 315 Kw electro motor 4. Hydraulic floor - New (additional field) 2 x fields 8x2m. 5. Input Lateral Transporter (606x606) Drive: hydraulic drive 5,5kW, 4hydrocilinders. Serves for raw material feed and up to 50 ° (chop and sawdust) up to 30m in length. For the towel element, Gal's transport chain is used, with hardwood slats attached to it, and the name of the flywheel carrier. It consists of a zipper, angle, flat and drive module. Drive: Hellicocentric 7.5 kW gearshift gear, class IE2. 6. Input silos Hydraulic drive 5,5kW, 2 hydrocilinders. 7. Double screw feeder Screw feeder ~4m with two screws. Used for feeding material into drying drum (through rotational valve). 8. Industry furnace – 2,5 MW (new burners, new generation). Zmaj 2,5MW is furnace designed specially for air heating in process industry. It uses exclusively pellet as fuel. It consists of 6 separate burners with automatic pellet feed. By burning pellet, furnace reaches preset temperature of air. Thermal power: 1.2MW. Volume of burner chamber: 3m3. Number of burners: 6. Power per burner: 200kW. Control: separate for each burner. Insulation: Tervol HTB 700 9. Hot air mixer Capacity: 48.000 m3/h. 10. Rotary drum dryer 3t/h Hjdjq Rfhdspfx Ag Iji Drive: 2 x 5,5kW. Capacity: 3t/h. 11. Pipelines 12. Cyclone separator 2900 Cyclon separator 2900 is part of air transport system used for separation of transporter fluid (air) from transported material (particles of sawdust). It is conected to SC fan – a drive element for air transport system. It's placed directly over the rotational valve and hammer mills. Delivered with support construction. 13. Rotational valve B (x6 small used, 2 new) Power: 3kW. Big sized rotor. 14. Hammermill 3t/h Hammers: S=10mm, HARDOX. Capacity: 3 t/h. 15. SC CB fan It consists of a chassis, a chassis, and a drive. The fan's inlet is connected with a single 1800 cyclone and the outlet with the Ø900 pipe funnel. Serves air transport from hammer mills. Capacity: 48.000m3/h. Drive: 55kW. 16. SC fan Capacity: 48.000m3/h. Drive: 50kW. 17. Cyclone1700 (x6) 18. Support construction for cyclone battery With maintenanace platform. 19. Screw feeder CB 20. PELLET PRESS ADNRITZ PALADIN 1600 ( 2 x 90 Kw ) Screw feeder beneath the cyclone battery ~5m. 21. Homogenizer – New. (new generation) Device for biomass homogenization. Provides autonomy for rest of the process. Drive: motor-reduktor 5kW. 22. Bucket elevator – Homogenizer Tranporting device for sawdust. INOX buckets, rubber belt. Drive: 3kW. 23. Preconditioner Konditioner without screw feeder. Directly influences quality of pellet and pellet press tool endurance. 24. Automatic Packing unit - 6t/h

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: Hjdpfeq Nfuzex Ag Isi 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: used, functionality: fully functional, Specifications: - (54) 22'' x 8'' x 3'' Hjdpfx Agswtzpye Iji - 7.5 kg capacity moulds on transfer chain - Propane burner - CSA approved

Condition: used, Year of construction: 2022, Technical details: current intensivity: 9 A Hedpfx Aoynhw Sog Iei total power requirement: 5 kW weight of the machine ca.: 0,08 t voltage: 3x 400 V : 50/60 Hz Protection class: IP 21 cooling type: AF l Burner connection: EURO-Zentralanschluss

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HD 7/16-4ST + HWE 860, This listing refers to a Kärcher high-pressure cleaner HD 7/16-4 ST in combination with a Kärcher Hot Water Generator HWE 860 (stationary unit). The machine has been inspected in our in-house workshop and is fully functional. High-Pressure Cleaner HD 7/16-4 ST / HWE 860 Kärcher Hot Water Generator Product Description: HD 7/16-4 ST With a working pressure of 160 bar, the pre-configured cold water high-pressure cleaner HD 7/16-4 ST serves as an entry-level unit in the range of our stationary HD cleaners with single-lance operation. Our pre-configured cold water high-pressure cleaner HD 7/16-4 ST comes equipped with various features and offers multiple options for individual upgrades. A dry-running protection system and an operating hours counter are included as standard. The unit allows for the suction of one or two detergents in either high- or low-pressure mode and can be optimally configured to its place of operation thanks to an extensive accessory package (see photos). Hedpjymdm Tjfx Ag Isi With 160 bar working pressure, this high-pressure cleaner delivers more than sufficient power to tackle even very demanding cleaning tasks. Kärcher innovations such as the EASY!Force high-pressure gun, which reduces the holding force to zero by utilizing the recoil force of the high-pressure jet, and the EASY!Lock quick-release fasteners (enabling five times faster handling compared to conventional screw connections with no compromise on robustness and durability) support the user. Kärcher Electric Hot Water Generator HWE 860: The electric hot water generator HWE 860 is used in conjunction with the HD 7/16-4 ST high-pressure cleaner and heats water up to 85 °C. Operation of this unit requires proper instruction. Description: HWE 860 Kärcher Hot Water/High-Performance Heater The electric hot water generator offers an output of 24 kW. Its use is especially recommended where burner exhaust emission is problematic or not permitted. Maximum temperature is 85 °C, thermostatically controlled. The unit can be operated manually or automatically. The device is used in conjunction with a high-pressure cleaner. The hot water generator is delivered as a standalone assembly, complete with control cabinet and all necessary components (hoses, cables, clamps, etc.). Optionally, the customer can select between cold and hot water operation via two solenoid valves and opt for a digital timer during configuration. The unit can also serve as an instantaneous water heater—for example, during continuous operation at a flow rate of 700 l/h and an inlet temperature of 15 °C, a temperature of 45 °C is achieved (a temperature increase of 30 °C). TECHNICAL DATA FOR BOTH UNITS AVAILABLE ON THE NAMEPLATES. FOR FURTHER PRODUCT DETAILS ON: HIGH-PRESSURE CLEANER HD 7/16-4 ST HOT WATER GENERATOR HWE 860 WE RECOMMEND CONSULTING THE MANUFACTURER, KÄRCHER. Subject to changes and errors. Do you have any questions, wish for a consultation, or want to view the equipment on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively under our General Terms and Conditions (GTC).

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side Hjdodz Spwopfx Ag Iji - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: used, Year of construction: 2013, table width 6000 mm table length 2000 mm burner heads 1 Equipment: Hsdpfx Asyk Dgzsg Isi - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cutting range 0.5 - 50 mm Piercing up to 30 mm Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min Hjdpfoxv D T Rjx Ag Iji weight 4980 kg dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 12 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: used, Year of construction: 2019, Manufacturer: Arnold Holstein Consisting of: Packing press type H65: Capacity: 1,200 kg/h Efficiency up to 75% 24 press inserts (65 x 65 cm) 22 pressing cloths (100 x 100 cm) Dimensions: 2,330 x 840 x 2,060 mm Fruit conveyor Pasteurizer Profi PA SH: Capacity: 600 l/h 48 kW heated with gas Automatic temperature controller V4A Dimensions: 2,100 x 880 x 1,300 mm Bag-In-Box dosing machine Profi Capacity: 600 l/h including weighing unit bags with up to 10 l Additional title: Juice bottling incl. fruit reception and processing Capacity pasteurizing/filling: 600 l/h Capacity press: 1200 kg/h Power: 1,5 kW / 48 kW Features: Fruit conveyor with water bath / shower and shredder, packing press type H65 - 1,200 kg/h, efficiency 75%, 22 pressing cloths, 2.33 x 0.84 x 2.06 m; pasteurizer Profi PA SH - 600 l/h, 48 kW, 2.1 x 0.88 x 1.3m; gas burner; automatic dosing unit - 600 l/h, incl. weighing unit. Automatic filling stop by weight setpoint. Hodpfxevcq Dmj Ag Isi

Year of construction: 2007, condition: excellent (used), functionality: fully functional, 1 x Fulton Ltd horizontal steam boiler with upgraded Weishapt 750 kW gas-burner in packaged plantroom. Model of steam boiler - RBC 1000. Hedoym Amxopfx Ag Iji Serial number of steam boiler – F103114OB. Date of manufacture – 2007. Supplied with all ancillaries in a 7.5m long x 3.21m wide x 3.4m high custom-built container plantroom.

Condition: used, Used edible oil refinery with capacity 150 tonnes/day of edible oils. Hsdpfxsyhc Rys Ag Isi Plant includes (3) GEA type RSB100-01-076 separators that can produce 300 tons/day, but the rest of the plant is maximum 150 tons/day. Refinery can process soya, rapeseed, peanut; and also sunflower and corn oil because it includes winterisation step for waxes separation. Major equipment / sections include:- neutralisation, caustic soda dosing, separation for dewaxing, filtration, deodorisation, biomass boiler, water treatment system.

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Hjdpfxsyl Rzbj Ag Isi Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Weight: 250 kg Power supply: 380V Flexible temperature control.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2026, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 03/2027, total length: 615 mm, total width: 640 mm, total height: 1,380 mm, electrical fuse: 16 A, input frequency: 50 Hz, Beater Machine Rego SM 2 + overhauled Floor-standing machine 2 operating functions: 1 x stirring / 1 x beating Hjdpfx Asw Tqizjg Ioi Bowl illumination Connection: 400V, 16A-CEE plug Dimensions: 640 x 615 x 1380 mm (W x D x H) Used machine, overhauled Quality from a specialist workshop! Benefit from over 35 years of experience! Options: Ring gas burner Maintenance contract E-Box for increased safety Delivery service We offer a large selection of mixing machines!

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 03/2027, total length: 1,140 mm, overall weight: 285 kg, total width: 800 mm, total height: 1,620 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 285 kg, Rego SM 2000 M Beating Machine The machine when it comes to beating! Mixing machine with automatic timer 2 operating modes: 1 x mixing / 1 x beating Manual bowl lift Bowl lighting Connection: 400V, 16A CEE plug Used machine, overhauled with warranty + spare parts service + Quality from a specialist dealer! Benefit from over 35 years of experience! Options: New bowl New whisk Ring gas burner Maintenance contract Hodpjw Tqihsfx Ag Ioi Service package Delivery service Instruction / commissioning Visit our large bakery machines exhibition!

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Heidebrenner stool stove Gas cooker Model: AKO 70 1-leaf gas burner Stainless steel version with chassis for bottles of gas Nominal heat load 3.8 kW Hodpjgx T A Nefx Ag Iji Dimensions: 410 x 410 x 700 mm, WxDxH Used equipment cleaned Visit our large bakery machines warehouse!