Used Blower for sale (1,138)

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Nedev D Rg Djpfx Ai Aolh Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Features and technical specifications: Constant working height with combined unit with steel contact roller and electronic CPS articulated pressure beam with 25 mm pitch Sanding width 1100 mm Abrasive belt length 1900 mm Nodozk Nlbjpfx Ai Aolh Workpiece thickness min./max. 3–150 mm Feed speed: infinitely variable 2.5–13 m/min Grinding unit 11 kW Paint package: - infinitely variable belt drive speed via frequency converter - Belt blow-off device - Vacuum conveyor belt with blower Control system: - Terminal with 50 programme memory slots - simple menu control via plain-text display - visual display of the active elements in the processing line - Fully automatic PLC-controlled start-up sequence for all drives - digital time and attendance recording with cleaning brush Roller table at the inlet Roller table at the outlet Extraction capacity 1850 ³/h Extraction connections: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection 6–8 bar Air consumption 10 l/min Weight 2,200 kg Availability: at short notice Location: Röllbach

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Nljdpfozp D Eaox Ai Ash Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan Nljdpfx Aoz Hxp Soi Ajh • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AE00003735, overall weight: 4,300 kg, input frequency: 50 Hz, input current: 126 A, input voltage: 400 V, warranty duration: 12 months, Basic information Nlsdpfxozyghlj Ai Aeh Manufacturer: SCM Group / DMC Model: DMC Eurosystem M4 1350 Year of manufacture: 2023. Condition: unused, new Operating hours: 0 h Working width: 1.350 mm Working thickness: 3-200 mm Feed speed: 2-16 m/min Power supply: 400 V, three-phase, 50 Hz Rated current: 126 A Weight: approximately 4,300 kg Serial number: AE00003735 Location: Tenja, Croatia Availability: immediately Description; For sale is an unused SCM DMC Eurosystem M4 1350 automatic wide-belt sanding and calibrating machine, manufactured in 2023. The machine has never been used in production and has 0 operating hours. It is installed at our production facility and is available for inspection by prior appointment.   Working unit configuration 1st working position - sanding roller • R 320-2620 sanding unit • Roller diameter: 320 mm • R45 rubber-coated roller, 45 Shore hardness • 15 kW motor with frequency inverter • Oscillating abrasive-belt blowing and cleaning system 2nd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 3rd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 4th working position - superfinishing sanding pad • S-2620 unit with superfinishing sanding pad • PE 32/L EPICS electronic sectional sanding pad • Segment pitch: 32 mm • 11 kW motor with frequency inverter • Electronic working-pressure control • Oscillating abrasive-belt blowing and cleaning system   Outfeed finishing unit • SB/U oscillating finishing unit • SB 200 UFC Ultra Fine brush roller • Silicon-carbide fibres • Rotating blowers for final workpiece cleaning Additional equipment • Fixed working height of 900 mm • BL 32 electronic infeed panel-reading bar • EPICS electronic sectional-pad system • Vacuum conveyor system with motor up to 7.5 kW • Perforated vacuum conveyor belt • Rubber-coated conveyor belt, 50 Shore hardness • 2.2 kW conveyor-belt drive motor • Front and rear roller support tables • Eye-M industrial PC • 21.5-inch Full HD touchscreen • Maestro Pro-Sand control software • Remote service capability • Operator interface in English and Croatian • CE-compliant version Inspection and terms of sale; The machine is available immediately and can be inspected by appointment at our production facility in Antunovac, Croatia. The machine is offered ex location. Dismantling, loading, transport and installation at the buyer's site will be agreed separately. All technical information is based on the original SCM quotation and the machine identification plate. The buyer may verify the specifications and condition during inspection. Additional photographs, videos, the original technical specification and the relevant SCM documentation are available to serious prospective buyers. Price; EUR 125,000 net, plus VAT - negotiable

Condition: used, Year of construction: 2014, functionality: fully functional, GLASTON TAMGLASS RC200 (Type 2136) – Year 2014 Tempering Furnace Max. Glass Size 2100 x 3600 mm Installed Power: Nljdpfxsz D Dnhe Ai Ash - Blowers: 250 kW - Heating and Drives: 421 kW - Average Process Power: 263 kW Overall Dimensions: 18,000 x 6,000 x 3,100 mm Blower Room Dimensions: 6,000 x 5,000 x 4,000 mm

Condition: ready for operation (used), Year of construction: 2021, Edgebander manufactured in 2021. This BIESSE Akron 1440 A features a feed speed of 12–18 m/min and can process panel thicknesses from 10 to 60 mm. It includes automatic edgeband feeding from rolls and strips, along with a pre-milling unit and various trimming units for enhanced finishing. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical specifications: • Feed speed: 12–18 m/min • Feed motor: 1.5 kW • Panel thickness: 10–60 mm • Edge thickness (from rolls): 0.4–3 mm • Edge thickness (from strips): 0.4–12 mm • Glue pot capacity: approx. 2 kg • Glue heating time: approx. 10 min • Power supply: 400 V / 50 Hz / 3 Ph + N • Control voltage: 24 V DC • Processed edgeband: approx. 737,000 mIntegrated configuration/equipment: • Automatic edgeband feeding from rolls and strips • NC-controlled automatic group adjustment • Automatic program selection and diagnostics • Production statistics and maintenance software • Antistatic spraying unit • Pre-milling unit with 2 × 1.8 kW HF motors • Glue application and pressure unit • End trimming unit • Top/bottom trimming unit • Corner rounding unit • Radius scraping unit • Surface scraping unit • Textile polishing brushes • Cleaning liquid spray unit Nsdpoz Dwlmefx Ai Aslh • Hot air blower Technical Specification Feed Speed 18 m/min

Condition: used, mileage: 1 km, first registration: 06/1966, Year of construction: 1966, machine/vehicle number: 0050066 / 20, Special features: Snow blower S 3, Mounting plate, size 3, Hydraulic lifting mechanism, Drive via PTO shaft, 3 scraper blades, with side blade, Njdpfx Asiq T R Nsi Ajlh Clearing width: 2,400 mm Front mounting height: 1,100 mm Weight: 700 kg including PTO shaft Sold as is!

Condition: new, Year of construction: 2022, functionality: fully functional, Item: A-Aalborg-Micro AALBORG MICRO Nedpfsqy Nv Rjx Ai Aolh The Aalborg Micro is a compact exhaust gas heat exchanger/steam generator, designed for waste heat recovery from gas/MDO/HFO engines and gas turbines. As a heat exchanger, the Aalborg Micro offers a wide range of opportunities, due to the fact that hot water, TEG and TFO can all be used as media. Furthermore the Aalborg Micro can be used as a steam generator. A cylindrical unit in the center with an integrated regulation damper allows up to 80% of the exhaust gas to bypass the heating surface. The heating surface can be cleaned easily via optional soot blower rings using compressed air/steam/water, and/or by a pyrolysis process in dry-run mode

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW Nlodpfx Aoci Ik Sji Ash 8 levels, 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115, autofocus Chiller Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure monitor, and software control Voltage stabilizer 48-72 KVA Enclosure according to Laser Class 4 Heavy-duty machine base. High-performance servo motors. Intelligent cutting control system, easy operation Fast tack welding, supported by segment and step tack welding technology Specialized air duct with oversized diameter, ensuring smooth fume extraction. Completely enclosed design European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet metal loading capacity 1500 kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 Machine power 32-48 kW Voltage 380V/50Hz Delivery time: 5 months (construction time + transport) Delivery to customer's premises: €3,500 Installation and training: €8,850 Industry 4.0 software: €9,500 FILTERCUBE 2H, 4.0 kW, 40 m²: €10,500 The Filtercube series is a dust extraction system equipped with filter cartridges, used for fume filtration and dust removal.

Condition: good (used), Euroventilatori XTTRC801LG0 Centrifugal fan High output centrifugal fan, mounted on stand with 37Kw motor, 3Ph Njdpfotwdq Tsx Ai Aslh

Condition: used, Year of construction: 2011, Cap Blower 12000 Caps/ Hour 2x 2m Pipes 2x Curve 90 Degree Lot of Shorts pic's And Connections Nedpfsz Rkafex Ai Aolh

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Nljdpfez Rki Tex Ai Aeh Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: as good as new (ex-display), Year of construction: 2018, Very little used , condition as new ! FORMAT 45 X 90 CM FEEDER: Njdpfx Asxwp N Hei Aolh Pile feeder with vacuum belt and automatic device for cleaning the valve. It is equipped with air blasts for spacing the sheets, when there is no suction. Front and side blowers for separating the sheets. Height, positioning, quantity and volume values are all adjustable. LAY REGISTER TABLE: Lay register table with round belts, in lower and upper position, anti-scratching for UV-coated and laminated sheets. CREASING: Die creasing. Easily replaceable matrixes thanks to a bayonet system that enables quick changes in creasing width (Optimum creasing with all paper grammages). DELIVERY: Delivery table for hand collection PROGRAMMING – CONTROLS: Colour programming touch screen. Digital programmer to set creasing positions and all machine data. Jobs storage. Copy counter. Output counter. Programmable copy divider (batches).

Condition: new, Year of construction: 2026, The HDE Series Hopper Dryers are designed for efficient drying of plastic granules before extrusion, injection molding, and blow molding processes. Moisture contained in plastic materials can cause defects such as bubbles, silver streaks, poor surface finish, and reduced mechanical properties. The HDE Series effectively removes surface moisture using a controlled hot-air circulation system, ensuring stable processing conditions and consistent product quality. All material-contact surfaces are manufactured from stainless steel, preventing material contamination while providing excellent corrosion resistance and long service life. The precision cast aluminum hopper offers excellent heat retention and ensures uniform drying throughout the entire material batch. A specially designed hot-air diffuser distributes heated air evenly inside the hopper, significantly improving drying efficiency. The low-noise blower delivers stable airflow while preventing dust from entering the material. The hopper is equipped with a material level inspection window, an auto loader mounting port, and safety systems protecting against overheating and motor overload. The modular design allows quick cleaning and fast material changes, making the HDT Series suitable for continuous industrial operation Technical Specifications Hopper Dryer HDE-25 Nedpozv Emlsfx Ai Ajlh • Hopper Capacity: 25 kg • Blower Power: 135 W • Heater Power: 3.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 3.6 kW • Installation Size: 150 × 150 mm • Dimensions (L × W × H): 830 × 580 × 840 mm • Weight: 34 kg Hopper Dryer HDE-50 • Hopper Capacity: 50 kg • Blower Power: 155 W • Heater Power: 4.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 4.7 kW • Installation Size: 160 × 160 mm • Dimensions (L × W × H): 920 × 590 × 940 mm • Weight: 45 kg Hopper Dryer HDE-100 Technical Specifications • Hopper Capacity: 100 kg • Blower Power: 215 W • Heater Power: 6.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 6.7 kW • Installation Size: 178 × 178 mm • Dimensions (L × W × H): 1070 × 700 × 1080 mm • Weight: 68 kg

Condition: like new (used), functionality: fully functional, For sale: a very nice Bourg collator with jogger. The world’s fastest vertical collator, capable of processing 9,000 sets per hour. Brand: Bourg, type BST-10-D+, with a Bourg jogger. Features 10 stations, a vacuum feed belt, and an air blower. Nsdpsz E Rttefx Ai Aolh Equipped with a color touch screen, programming windows, and double-sheet and missing-sheet detection. Operates on 220 volts. You are welcome to test this machine at our facility. We can arrange transport and packaging for you and load it into a truck or container. Please request a price including transport (within the Netherlands). Best regards, Henk Hoos.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Felder P200 Edgebander (2008 model) – compact and efficient A versatile and robust P200 model edgebander, ideal for small joinery shops, workshops, and short production runs. The machine uses pre-glued edgebanding and is quick to set up—you can start working in just a few minutes. Features and equipment: Edgebanding: For edge material with a thickness of 0.4–2.0 mm. Flush milling: Removes excess edge material so the edge is flush with the workpiece surface. Radius and bevel milling: Option for 2 mm radius or 15° bevel. Pneumatic end trimming: Trims the edgebanding flush with the workpiece at both the start and end. Hot air blower: 3,000 W output with adjustable temperature between 20 and 500°C. Temperature display: Temperature shown on a thermometer. The machine features a compact design yet is robust, making it an excellent fit for smaller workshops where space is limited. Workpiece height: 10–45 mm Edge thickness: 0.4–2 mm Nlsdpfez R I Uuex Ai Ash Feed speed: 5.5 m/min Adjustable operating temperature: 20–500°C Weight: 260 kg Transport throughout Europe can be arranged at a good price.

Condition: excellent (used), mileage: 144,307 km, power: 210 kW (285.52 HP), first registration: 07/2013, overall weight: 12,500 kg, fuel type: diesel, axle configuration: 4x4, maximum load weight: 5,740 kg, empty load weight: 6,760 kg, fuel: diesel, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, total width: 2,550 mm, number of cylinders: 6, displacement volume: 6,374 cm³, nominal power: 210 kW (285.52 HP), Equipment: ABS, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power mirror, Key Features Internal Reference: 24198M Chassis Number: WDB 405 123 1V2 338 46 Serial Number: 676.914.353 Vehicle Model: Unimog U400 4x4 Vehicle Make: Unimog Product Category: Slope Mower Condition: Used Mileage: 144307 Emissions Standard: Euro 5 Date of First Registration: 17.07.2013 Last Inspection (MFK or TÜV): 22.03.2023 Fuel Type: Diesel Overall Vehicle Condition: very good Engine Displacement (ccm): 6374 Engine Power: 285 Transmission Type: Semi-automatic Cylinders: 6 Suspension: Steel-Steel Hydraulic System: Tilting hydraulics, additional hydraulics Cab Vehicle Equipment: ABS, CD Player, Differential Lock, Electric Windows, Electric Mirrors, ESP, Radio, Cruise Control, Central Locking Cab Size: Day Cab Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 4x4 Axle 1: 315 / 80 R 22.5/10mm, Disc Brakes, Leaf Spring Suspension Axle 2: 315 / 80 R 22.5/10mm, Disc Brakes, Leaf Spring Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 12500 Gross Train Weight: 32300 Payload: 5740 Unladen Weight: 6760 Vehicle Width: 2550 Superstructure Superstructure Manufacturer: MULAG Superstructure Year: 2013 Superstructure Equipment: Trailer Hydraulics, Cabin Control, Auxiliary Drive Superstructure Notes: Manufacturer: MULAG, Year: 2013, Trailer Hydraulics, Cabin Control, Auxiliary Drive, - Roadside verge mower MRM 300 - Roadside verge mowing head RMK 1200 - High-pressure blower HDG - Front-mounted - Guide post MLM 200 - Slope mowing equipment SB 500/600 - Flail mowing head with grass collection AMK 500/1200/1600 Nsdpfx Aez Hwr Sei Aelh - Operating manuals available

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) Nedpfx Aijif Ek Rj Aolh The machine is CE certified.

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Nlsdjuxqzuepfx Ai Ash Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), IR dryer for 28” (50x70 cm) paper and cardboard processing, for example in the delivery of a 28” offset machine Nsdpfjv Nzq Rex Ai Aolh The lamp holder contains 18 lamps of 1kW; the frame in which everything is attached and soldered is liquid cooled, preferably with coolant, the warm air is treated by 2 blowers, one for supply of cool air and one for extraction of the warm air in case of paper stop or paper crash where the machine would stop with sheets in the delivery. The lamps are then switched off and hot air is forcibly extracted. Everything is clearly indicated in diagrams and that is all complete.

Condition: used, mileage: 63,679 km, power: 140 kW (190.35 HP), first registration: 07/2020, fuel type: diesel, empty load weight: 2,257 kg, maximum load weight: 843 kg, overall weight: 3,100 kg, next inspection (TÜV): 08/2028, fuel: diesel, CO₂ emissions: 177 g/km, fuel consumption (urban): 8 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7 l/100km, color: white, gearing type: automatic, suspension: other, number of seats: 5, total length: 5,140 mm, number of beds: 4, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking heater, second-hand vehicle warranty, soot filter, traction control, Air conditioning in the cab, pilot seats, rotating, Mercedes chassis, blower heater, pop-up roof with double bed, rear double bed, lumbar support, 5 seat belts, thermal protection glass, clock & tachometer, brake pad indicator, dimmable exterior mirrors, 4-door, 2nd owner, Euro6d_Temp, green environmental badge (4), fabric, tinted windows (privacy glass), spare tire, glare-free high beam, rearview camera, black, passenger airbag, side airbags in the front, window/head airbags in the front, sliding door on the right, sliding door on the left, color monitor for navigation system, leather steering wheel, shift paddles, parking assistance, parking assistance camera, parking assistance sensors in the rear, parking assistance sensors in the front, digital radio, electrically foldable exterior mirrors, electric windows 4-way, seat heating, seat heating for front seats, multifunction steering wheel, radio, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, automatically dimming interior mirror, power steering, non-smoking vehicle, electric exterior mirrors, alloy wheels, rear-wheel drive, 3rd brake light, center armrest, country version Germany, additional equipment available, errors and prior sale reserved, trade-in possible, financing possible, please contact us, we will create a customized offer for you. 36 months Young Stars guarantee promotion valid from 01.10.2026-30.11.2026 subject to early budget exhaustion. Comfort suspension, steering wheel adjustable in inclination and height, leather steering wheel, multifunction steering wheel with trip computer, bumpers and attachments painted in vehicle color, hill-start assist, additional battery for retrofitted consumers, buffer battery for starting, separating relay with additional battery, electrical system for trailer socket, Audio 40, fleece battery 12 V 92 Ah, 2-way speakers in front and rear, 12V sockets for rear seat rows on the right and left, Mercedes-Benz emergency call system, breakdown management, parking package, active parking assistant, heater for windshield washer system, exterior mirrors electrically foldable, lockable. Nedpfx Aie Aa A Uls Aslh

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, overall weight: 2,500 kg, grinding height: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 1. Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 2. Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 3. Sanding roller, 85 Shore TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversing function: 3 Nlodpfxoz Hxnbo Ai Ash Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is delivered without a power cable. The electrical connection must be provided on site.

Condition: new, For sale: Siemens industrial three-phase electric motor, previously used in an industrial combustion air blower application. Technical specifications: * Manufacturer: Siemens * Model: 1LG4 280-4AA60-Z * Rated power: 75 kW * Voltage: 400 V Δ / 690 V Y * Frequency: 50 Hz * Speed: 1485 rpm * Current: 136 A / 78 A * Mounting arrangement: IM B3 (foot-mounted) * Protection class: IP55 * Insulation class: F * Weight: 535 kg * Year of manufacture: 2007 Nlodpfx Aisz S Irnj Aeh The motor is available from our warehouse in Rotterdam, the Netherlands. Worldwide shipping can be arranged upon request.

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 17,550 mm, Equipment: air conditioning, General information Year of construction: 2026 Operating hours: 5 Technical information Number of cylinders: 4 Nodpfxez Aakfj Ai Aslh Engine capacity: 3.621 cc Engine type: Deutz TD 3.6 L4 Empty weight: 11.630 kg Dimensions (LxBxH): 615 x 236 x 245 cm Functional Lifting capacity: 4.000 kg Maximum reach: 1.308 cm Quick coupler system: Yes CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Electric windows - Mudguards - Pallet forks - Quick change - Support legs - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: Frankrijk New Manitou MT 1840 75D with Air Conditioning