Used Boring Head for sale (13,718)

Condition: excellent (used), 1 x stainless steel 14 head multihead Screw weigher complete with twin incline feed conveyor and exit conveyor. IP65 rated. Dimple pans for sticky and awkward products. Kdsdez Ak I Uspfx Ap Deu Model TY-P14

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 2,960 mm, travel distance Y-axis: 4,800 mm, travel distance Z-axis: 510 mm, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 120 mm, number of axes: 5, number of slots in tool magazine: 40, controller manufacturer: osai, actuation type: pneumatic, Equipment: CE marking, documentation/manual, The machine is in full working order. It is operational. Maintained accuracy is at the level of +/- 0.2 mm. Kdsdpfxe Aarpls Ap Dou The offer with details and photos is attached.

Condition: used, Technical details: x-Travel: 530 mm table cross travel (Y-axis): 5200 mm w-axis: - mm drilling depth in one stroke: ca. 4000 mm metrical thread cutting: 0,25 -560 M total power requirement: 35 kW bed width: 560 mm centre distance: 5700 mm centre height: 500 mm swing diameter over bed: 1000 mm turning diameter over support: 800 mm range of feed in x - axis: 0,0063 - 4,0 mm/U range of feed in y - axis: 0,0063 - 4,0 mm/U spindle bore: 135 mm range drill spindle revolution per minute: max.1400 U/min range drill spindle revolution per minute: min. 7,1 U/min speed steps work spindle: 24 steps tailstock taper MT: MK 6 tailstock quill stroke: 300 mm dimension machine approx.LxWxH: 12,0 x 2,5 x 2,0 m The machine was retrofitted/overhauled in 2007. Special-purpose machine suitable for deep-hole drilling and/or heavy-duty turning operations. Inch thread range: 1/16 – 80 TPI 3-jaw chuck, chuck diameter: Ø 315 mm 2 steady rests Faceplate: Ø 800 mm without jaws Kdedpfx Apjzxlv Ee Dsu PARAT quick-change tool holder, Type 4 3 pices Coolant system HEIDENHAIN PT 880 4-axis DRO Boring bar for deep-hole drilling Drilling head for deep-hole drilling Infinitely variable boring-bar feed Various accessories *

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 16201201, drilling depth: 70 mm, type of input current: three-phase, compressed air connection: 8 bar, input voltage: 400 V, workpiece height (max.): 65 mm, number of spindles: 21, operating pressure: 8 bar, input frequency: 50 Hz, workpiece length (max.): 850 mm, workpiece width (max.): 3,000 mm, For sale is a used Felder FD 921 dowel drilling machine from 2015. This machine is ideally suited for precise dowel joints and series hole drilling in the furniture, interior design, and carpentry sectors. Thanks to its robust design and proven Felder quality, it is ideal for professional use. Further technical data: Drilling unit with 21 spindles Motor power: 1.5 kW Rated current: 3.8 A Working pressure: 6 - 8 bar Multi-spindle dowel drilling machine for efficient series and dowel drilling Precise workpiece stops and easy operation Number of drilling heads: 21 (11 right-rotating, 10 left-rotating) Axial distance between the drilling heads: 32 mm Max. workpiece size: 850x3000 mm Kedez Rvd Nopfx Ap Dodu The machine is in used, fully functional condition and shows the usual signs of wear of a workshop machine. It is ideally suited for carpentry shops, joineries, and professional furniture and interior design. Inspection and test run possible by appointment.

Condition: excellent (used), 1 used, very well-maintained universal milling head system "HURON" with hydraulic tool clamping and electric tool release signal Model: KFU-2-45, version 021 Technical data: Kdjdpey Uby Iofx Ap Dou Spindle mount, DIN 2079: ISO 50, for tools according to DIN 69871 + 69872, Type A Overhang: 377 mm Max. speed range: 3500 rpm 3750 rpm 50% duty cycle/hour 4000 rpm 30% duty cycle/hour Max. drive power: 15 / 22 kW Operating pressure for tool release: 80 + 5 bar Dimensions L x W x H: 450 x 305 x 360 mm Weight: approx. 180 kg Accessories / Special features: • 2 manual swivel table systems "HURON" • Hydraulic tool clamping • Electric tool release signal • For retrofitting to conventional, NC or CNC milling machines or boring machines (e.g.: AUERBACH, UNION, MTE, LAGUN, CORREA, ZAYER, CME, AYCE, SACEM, JUARISTI, ARSENAL, ...) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Kdjdpsz Uxmbefx Ap Dsu Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, feed length X-axis: 4,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, torque: 1,890 Nm, controller manufacturer: heidenhain, controller model: TNC 530, table load: 10,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 33,000 W, spindle nose: ISO 50, number of spindles: 1, number of slots in tool magazine: 136, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, X-axis: transverse movement of the table, 4000 mm Y-axis: vertical movement of the head, 2500 mm Z-axis: longitudinal movement of the column, 1500 mm W-axis: longitudinal movement of the quill, 600 mm Feed rates for X/Y/Z/W axes: 5/5/5/5 m/min Rapid traverse rates for X/Y/Z/W axes: 20/20/20/15 m/min Total number of tables: 3 – No. 1 pallet 1300 x 1600 mm (used for head changes) + No. 2 pallets 1300 x 1600 mm with 2 extensions 400 x 1300 mm Rotary table with rotation speed of 0 - 120 degrees/min INCLUDED ACCESSORIES: 2-spindle indexing head Kedo Aa Awaopfx Ap Dedu Quick-change system with BERG clamping jaws for mounting accessory heads Coolant passage through the spindle Chip evacuator for X=4000 mm travel RENISHAW RMP60 probe Robot tool changer with 136 positions AUTOMATIC pallet changer (1 pallet for accessory changes + 2 pallets for part machining) HEIDENHAIN TT140 tool probe CE marking

Condition: used, Indexing head with tailstock DECKEL Center height: 100 mm Gear ratio: 40:1 Spindle bore: 26 mm - 3-jaw chuck FORKARDT, Type F 160 with one set of step jaws - Crank handle with index plate and sector arms - Swiveling crank handle with index plate for direct dividing - 1 index plate with hole numbers: 36, 37, 40, 58 Kodpfx Aoxcbp Nep Djdu - 24-step index position (15° increments), graduated scale on the main spindle - Tailstock center with dovetail guide - Complete indexing head rotatable and tiltable on base plate Dimensions (L x W x H): 600 x 400 x 270 mm Net weight: 67 kg Indexing head in need of repair: - Key strip for dovetail guide is missing - Lever for index positioning is broken - Swivel mechanism is stiff

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Kdedezk N S Uspfx Ap Dsu Availability: at short notice Storage location: 63934 Röllbach

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Kdodpjzw Ragjfx Ap Dsu Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, ## 2021 Star SB-20R Type G – 20 mm CNC Sliding Head Lathe 7 axis | Twin spindles | Driven tooling | Guide-bush / non-guide-bush operation | FMB magazine bar feeder Available from Swiss CNC, this 2021 Star SB-20R Type G CNC sliding head lathe combines 20 mm bar capacity, twin-spindle machining and a versatile tooling platform for precision component production. Equipped with FANUC CNC control, it offers turning, milling, drilling, tapping and back-working capability within a compact machine layout. The 10,000 rpm main spindle and 9,000 rpm sub-spindle both feature C-axis control, supporting accurately positioned machining operations on the front and rear of the component. The fully independent sub-spindle allows front- and back-working operations to overlap where the component and programme permit, helping reduce cycle times and minimise additional handling. ### Guide-bush and non-guide-bush flexibility A key feature of the SB-20R Type G is its ability to switch between guide-bush and non-guide-bush operation. Guide-bush mode supports the material close to the cutting point, making it particularly suited to slender components and longer turned features. For shorter components, non-guide-bush operation can reduce bar remnant length and improve material utilisation. This flexibility allows manufacturers to adapt the machine to different component geometries and production requirements. ### Technical specification Ksdpfx Apez U Acme Dedu | Specification | Details | |---|---| | Manufacturer / model | Star SB-20R Type G | | Year of manufacture | 2021 | | Maximum machining diameter | 20 mm | | Controlled axes | Seven: X1, Y1, Z1, C1, X2, Z2 and C2 | | Maximum headstock stroke — guide-bush mode | 205 mm | | Headstock stroke — non-guide-bush mode | Up to 2.5 × bar diameter, maximum 50 mm | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 9,000 rpm | | Sub-spindle chucking capacity | 20 mm | | Spindle positioning | C-axis control on both spindles | | CNC control | FANUC CNC | | Rapid traverse | Up to 35 m/min | ### Tooling capability - Gang-type turning-tool arrangement, with six 12 mm or seven 10 mm square turning-tool positions, depending on the fitted tool block. - Four front-working sleeve positions for end-working operations. - Cross-drilling and milling capability, with modular cartridge tooling configurations available for different machining requirements. - Four-position back-working station, supporting static or driven tooling according to configuration. - Independent sub-spindle movement for component transfer and rear machining. ### Included equipment - FMB Turbo 2-20 automatic magazine bar feeder for 3.2 m bar stock. - Filtermist FX mist extraction system. - LNS MH500 Turbo swarf conveyor. - FireTrace fire suppression system. - Selection of tooling and workholding. The supplied bar feeder, extraction and swarf-handling equipment provide a practical package for manufacturers looking to add automated 20 mm bar-machining capacity. ### Machine hours and availability Power-on and cutting hours to be confirmed. 2021 machines available in the UK, offered individually. Price on application, plus VAT. Delivery, installation and training available. Contact Swiss CNC for pricing, machine videos, inspection arrangements and further information.

Condition: new, Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 1 ja boring of olive 1=yes, 0=no 1 ja Götzinger Olive drilling machine type OBM-PLUS (corner and scissor bearing + handle olive drilling) Pos. 1 ----- Vertical drilling unit with drill head quick-change device Pneumatic feed via foot valve 1 adjustable back stop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/400V, 50Hz, 1.1KW Pos. 2 ----- Drill head BKF 3, 21.5 mm pitch, quick-changeable Drill holder M 10, cyl. right/left complete with stop system 2200 mm long Total length with 10 folding stops adjusted to constant Grip size (olive drilling) Pos. 3 ----- 1 set of drills (for handle olives) consisting of: 2 dowel drills d = 10 left 1 artificial drill d = 25 (or according to your choice or manufacturer fittings) Pos. 4 ----- Drill head BKF 2/3 can be changed quickly 2/3 spindles for corner bearings drill on the loose frame part (Sigenia, Maco, Roto, Winkhaus, GU) complete with stop system with 2 folding stops Pos. 5 ----- Drill 2 cylinder head drills for corner bearings ----- Basic price in the above version Pos.1 - Pos.5 on request! ----- Kdodpfx Aoygm Tcep Deu Special accessories with additional charge: -Folding stop per piece, EUR 110,00/piece -Stop system for central drilling, EUR 1,980.00 -chassis, EUR 920.00 -Roller conveyor right/left 1.5 m, 200 mm wide complete with 4 rollers each, EUR 1,940.00 -Conversion kit for PVC with steel insert Oil brake cylinder for uniform feed speed PVC support to prevent the profile from tipping over Reduction gear for low speed, EUR 1,790.00 -Drill set for PVC with steel insert, EUR 420.00 2 step drills d = 12 mm left 1 piece step drill d = 12 mm right -2 pieces of additional stops for the stop in the tilt window, EUR 180.00 -2 pieces of additional pneumatic stops for gripping the entire fighter groove, EUR 1,650.00 -2 pieces of additional pneumatic stops for gripping the dowel hole in the Fighter area complete, EUR 1,650.00 -4 additional pneumatic double stops for gripping the dowel hole in the fighter area complete, EUR 1,980.00 PS: If the dowel hole is in the middle, 1 stop on the right/left is sufficient. If the dowel hole is off center, you need 2 stops on the right/left. -Packaging 1 box Packaging 1 pallet with foil, on request ----- We will be happy to send you the price list with all options upon request. (Technical information according to manufacturer - no guarantee!)

Condition: used, Year of construction: 1994, functionality: fully functional, overall weight: 27,000 kg, spindle diameter 125 mm x-travel 2000 mm y-travel 1600 mm Control Siemens 840 C z-travel 1400 mm 600 mm ja Kedpeztfwxofx Ap Dedu total power requirement 40 kW weight of the machine ca. 27 t

Condition: used, Year of construction: 2010, Automatic multi-head capping machine, model AZW - type 08, for bottles with metal caps, equipped with a pneumatic cap sorting device, type SWK - 800. Effective output: 2000 - 12000 packages/hour. Total weight: 2000 kg. Electrical power: 2.7 kW. Kdjdpfx Ajz S H Tdsp Deu Air pressure: 7-8 bar. Frequency: 50 Hz. Technical documentation: available. Please check my other listings.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine / gauge drilling machine with extensive accessories. Includes tools worth over EUR 12,000! Made in Bienne/Biel, Switzerland Excellent condition! To be sold only to a good and appreciative owner! Please, no more inquiries from dealers, thank you! Coordinate drilling machine/gauge drilling machine with tool package (see photos) in very well-maintained, exceptional condition, second owner (owned for 41 years). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive/rapid traverse in the X and Y axes and a potentiometer. The stepless feed in the X-axis also allows for light milling operations as well as surface milling. This eliminates the tedious manual cranking required for all other Hauser coordinate drilling machines. Furthermore, it has the rare thermal stabilization and expansion compensation feature. For this purpose, 2 heaters are provided, which must be switched on separately before starting work and to maintain high accuracy and gauge dimensions. This explains the factory-specified high positioning accuracy of 0.002 mm with a resolution of 0.00. It should be noted that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1 My resolution, also for the quill feed. This is a major advantage for precise drilling and surfacing in depth with Wohlhaupter, spindle tools, etc. With the mentioned options and in this first-class condition, it is very rare and highly likely not available again. These machines are mainly used in the watch industry, gunsmithing, precision engineering, material testing, and the optical industry, where the highest precision is required. Also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical wiring diagrams, etc. are available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, Vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds stepless from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Kdedezuvwljpfx Ap Dou Payment for the machine is made, as is customary for used machines, in full before loading, no partial or installment payments! Special price due to business closure. I prefer self-collection by the buyer via a forwarding agency or their own truck. Loading onto a truck is free of charge for the buyer. Shipping (direct transport without transshipment) within the EU is still possible. Price net for export within the EU. Example: Secure shipping via direct transport (without transshipment!) to, for example, France/Spain/Italy, etc. up to 1700 km distance approx. EUR 1100 - 1850, depending on current fuel costs, etc.

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin Kjdpei Apuhefx Ap Dedu - electric setting of planing thickness - two types of feed speed

Condition: good (used), Year of construction: 2014, Knuth Sinus 330 x 1500 Knuth Sinus 330 x 1500 lathe, manufactured in 2014, in very good original condition. The machine comes from a special production run by a renowned German machine tool company. CE compliant!! Technical data: Year of manufacture: 2014 Knuth Sinus 330 x 1500 Working area: Workpiece length: 1,500 mm Turning diameter over bed: 660 mm Turning diameter over cross slide: 440 mm Kedpjz Irwfefx Ap Djdu Turning diameter without bridge: 900 mm Bridge length: 320 mm Bed width: 400 mm Travel distances: Travel X-axis: 368 mm Travel Z1-axis: 230 mm Swivel range of top slide: 45° Main spindle: Spindle speed: 25 rpm - 1,600 rpm Spindle bore: 105 mm Spindle mounting: D1-8 Spindle taper: ø 113 mm / 1:20 Rapid traverse: Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Tailstock: Tailstock spindle diameter: 90 mm Tailstock taper: 5 MK Tailstock quill stroke: 235 mm Tailstock cross slide: ± 12.5 mm Drive power: Motor power, main drive: 7.5 kW Dimensions and weights: Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg About the machine: The Sinus D is the largest series in the universal lathe segment. Conventional lathes like this are characterized by their robust design and high versatility. The design follows a classic design, but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the power transmission between motor and spindle is also achieved here via a manual lamellar clutch. With integrated functions such as the removable bed bridge, rapid traverse, and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges. One-piece heavy cast bed with high stability Massive headstock with large spindle bearings Rapid traverse in 2 axes for fast positioning Taper turning attachment for additional applications Well-designed safety features You can find more lathes from well-known manufacturers on our website.

Condition: good (used), Year of construction: 1997,

Condition: used, Year of construction: 1988, machine/vehicle number: 13.088.094, travel distance X-axis: 420 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 120 mm, spindle speed (max.): 9,000 rpm, controller model: HEIDENHAIN TNC 155, drilling depth: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range, X-axis: 420 mm Travel range, Y-axis: 240 mm Travel range, Z-axis: 120 mm Travel range, A-axis: ± 30,000 ° Table clamping surface: 780 × 230 mm Drill head adjustment range: 450 mm Spindle speed: 50–9,000 rpm Spindle motor drive power: 3.7 kW Drilling capacity in steel: 20 mm Drilling depth: up to 120 mm Rapid traverse, X-axis: 7 m/min Feed rate, X-axis: 7,000 mm/min Rapid traverse, Y-axis: 7 m/min Feed rate, Y-axis: 1–7,000 mm/min Feed rate, Z-axis: 0.02–0.30 mm/rev Rapid traverse, A-axis: 10,800 °/min Feed rate, A-axis: 1–10,800 °/min MACHINE DETAILS Control system: HEIDENHAIN TNC 155 Kdedjz Ilu Rspfx Ap Deu Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 2,000 x 2,400 mm Weight: 2,000 kg EQUIPMENT Built-in workshop drawer cabinet Hand tools Milling cutters Matching tool holders Collets External Reference: C.O. - Lot 23

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Kodpfeizxbiex Ap Dedu Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Year of construction: 2010, condition: used, Double-head PROFTEQ SA 22 welding machine, manufactured in 2010, designed for welding PVC profiles used in the production of windows, doors, frames and sashes. The machine is equipped with two welding heads, one fixed and one movable, allowing both right-angle and variable-angle welding operations. The fixed head performs welding at 90°, while the movable head allows variable-angle welding from 45° to 180°, providing greater versatility in window and door manufacturing. The welding cycle is automatic and includes the heating, melting, joining and cooling phases of the profiles. Technical Specifications Manufacturer: PROFTEQ Model: SA 22 Year of manufacture: 2010 Machine type: Double-head welding machine for PVC profiles Number of welding heads: 2 Fixed head: 90° welding Movable head: Variable-angle welding from 45° to 180° Welding cycle: Automatic Minimum weldable profile height: 35 mm Maximum weldable profile height: 190 mm Maximum weldable profile width: 150 mm Kdsdpfx Aps Abbbae Deu Power supply: 380 V Frequency: 50 Hz Installed power: 4 kW Pneumatic pressure: 8 bar Weight: 1,000 kg Overall Dimensions Length: 3,800 mm Depth: 1,100 mm Height: 1,900 mm Features and Equipment Two welding heads for processing PVC profiles. Movable welding head for variable-angle welding operations. Pneumatic profile clamping system. Heating plates for melting the surfaces to be welded. Welding bead limitation system. Dedicated control panels for each welding head. Adjustable welding parameters, including temperature and processing times. Automatic welding cycle.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 x Loma Systems IQ2F / IQ3 twin-head metal detector with alarm and belt stop on detect reject system, mounted on a height-adjustable frame. Manufacturer - Loma Systems Date of manufacture - 2010. Serial number IQ3 standard head - MD301-12429D. Aperture dimensions: IQ2F Ferrous-in-foil head - 370mm wide x 135mm high (105mm useable) / IQ3 standard head - 350mm wide x 150mm high (115mm useable). IQ3 standard head frequency - Variable. Handing - Left to Right. Belt type - rubber. Belt dimensions - 2600mm long x 300mm wide. Kdsdjy Hinkjpfx Ap Dsu

Condition: used, Year of construction: 1995, TOS W100A horizontal table boring machine X spindle is worn Digital read out is partially functional lot of tools included Table Dimensions 1200 x 1200 mm X-Axis Travel (Longitudinal) 1250 mm Y-Axis Travel (Vertical) 1120 mm Z-Axis Travel (Cross) 1600 mm W-Axis (Spindle) 900 mm Spindle Motor 11mkW Spindle Speed 7-1120rpm Kodpfx Apsz Sff He Dsdu Spindle Taper ISO 50 Spindle Diamete 100 mm Facing Chuck 600 mm Floor Space 6020 x 3500 x 3000 mm Machine Weight 14.000 kg Price ex VAT Delivery ex works, as is

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 8382, 2-head welding machine for PVC profiles Kdsdpezdq Ttofx Ap Dju

Condition: new, Bore diameter variabel mm Number of heads horizontal 1 St. Number of heads vertical 0 St. Götzinger drill, dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10" touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ----- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ----- 1 stainless steel glue pump, high-pressure pump and glue hose item 3 ----- 1 press-in station with dowel separation and press-in cylinder item 4 ----- 1 oscillating conveyor for dowels d 8 x 60 mm with feed hose into the injection unit item 5 ----- 1 processing unit with cross table, linear guide and 3NC axis motors X = 200 mm processing width Y = 120 mm processing height Z = 50 mm offset item 6 ----- 1 positioning controller Touch panel 10" color 500 drilling patterns can be created and saved, which can be easily accessed when needed (1 drilling pattern can have up to 16 dowel positions) Software prepared for ONLINE connection With online control, the data for the control must be provided by the software be prepared. Our machine can then read and process this data. Kdodpfx Apju Uu Uzo Dju ----- Total price in this version Pos. 1 to Pos. 6: on request! Options with additional prices: ----- item 7 ----- 1 horizontal drilling unit, 1,000 W drilling motor Speed ??4,000 - 8,000 rpm, collet holder Pneumatic drill feed Surcharge: EUR 4,565.00 Additional accessories such as a larger touch screen, additional dowel station for additional dowel sizes or scanner for Program selection on request! Prices net plus statutory VAT, without packaging/shipping and without Installation. ----- (technical data according to the manufacturer - without guarantee!)