Used Boring Mill for sale (4,789)

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Hnodpfx Asv Trlmjd Dow Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Hedpfxjxuf Uts Ad Djnw Weight: 4,5 T

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, Max. working width: 740 mm Hedpfx Ajxuggwjd Djnw Max. pass-through width: 820 mm Motor: 2.2 kW 23 drilling spindles Horizontal drilling depth: 120 mm Vertical drilling depth: 80 mm Weight: approx. 350 kg

Condition: good (used), Two Swiss cylinder boring machines: 1. BH55 1049 (55–110 mm) (Price: €2,590) 2. BH35 1017 (35–58 mm) (Price: €2,590) The listed price is per unit, not for both together. Hedpexvq A Ssfx Ad Donw

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Travel paths Longitudinal movement (X-axis): 5,500 mm Vertical movement (Y-axis): 3,200 mm Spindle movement (Z-axis): 600 mm RAM/Outrigger movement (W-axis): 600 mm Feed rates X, Y, and Z axes: 2,800 mm/min Spindle unit Spindle power: 37 kW Boring spindle diameter: Ø 125 mm Spindle sleeve diameter: Ø 240 mm Spindle taper: SK50 Number of gear stages: 4 Spindle speed range: 3–700 rpm Faceplate diameter: Ø 1,000 mm Faceplate speed range: 1–82 rpm Gear stages Stage I: 3–33 rpm Stage II: 30–85 rpm Stage III: 88–247 rpm Hnodpexn Al Ajfx Ad Dsw Stage IV: 250–700 rpm Connection data Operating voltage: 3 × 400 V Mains frequency: 50 Hz Total connected load: 80 kW Dimensions and weight Machine footprint: approx. 8 × 5 m Total height: approx. 5.5 m Machine weight: approx. 50,000 kg Features and accessories Robust, flat-bed horizontal boring mill in moving column design, in very good condition Retrofit including electrical system in 2014 Refurbished control panel with Heidenhain digital readout Coolant tank with belt filtration system, high and low pressure pumps Counterweight for weight compensation Conventional control Thread cutting device with change gears Axis drives via intermediate gearbox Swiveling control panel for operation from the front or rear of the machine Telescopic steel cover for X-axis Scope of delivery excludes foundation plates and rotary table Chip conveyor included in delivery

Condition: used, workpiece weight (max.): 5,000 kg, Two-column coordinate boring machine CNC Manufacturer: Mikromat WMW Type: CBKoZ 1400x2240/2 Control: Siemens 840D (installed approx. 1997) Space required: 7000 x 6500 x 5300 mm (LxWxH) Weight: 22,500 kg incl. - tool holders shown Hnsdpfx Adevuhu To Dow - extensive documentation. For further information, see attachments. The machine can be tested/demonstrated on site under power. Freight basis: From location, without dismantling The buyer must dismantle and load the machine himself. A 10-ton bridge crane is available for this purpose, which was also used to assemble the machine at the time. Further assistance and the use of a forklift truck may be possible by arrangement. All information without guarantee. Subject to prior sale. The object of purchase is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duties by the seller or for any injury to life, body or health.

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, Hnsdpfsu Agzxox Ad Dsw 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, weight approx. 345 kg immediately ex stock 54634 Bitburg Subject to prior sale,

Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Hedsxuf Uaspfx Ad Djnw Weight: 3 T

Condition: ready for operation (used), Year of construction: 1994, functionality: unexamined, Pneumatic drilling stroke Pneumatic workpiece clamping 2 tables, each 500 x 280 mm Tables inclinable 2 drilling motors, each 2.2 kW 2 drilling gearboxes, each with 6 spindles Spindle distance: 25/35/40/47/52 mm Digital display for width adjustment Weight approx. 400 kg Hnedoxu Eckopfx Ad Djw

Condition: excellent (used), Year of construction: 2012, Information will follow… Hjdpfoxtfu Rox Ad Denw

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Hnodpfx Adopqx H Te Dow Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: used, diameter 85 mm tool adaptor SK 50 bore of diameter max. 130 mm adjustment of the slide 40 mm tool tapers in the slides 20 mm weight ca. 3 kg Machine dealer with own stock of 1600 m². Hodpev Dx Aasfx Ad Donw

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, Hedpfx Aew Sgm Hjd Dsnw 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Condition: like new (used), CNC: FAGOR 8055 (retrofit option with Heidenhain Tnc640) Spindle diameter: 110 mm Tool holder taper: ISO 50-7388/1 - DIN 69871 Milling arbor mounting diameter: 221.44 mm Tool clamping force: 1,600 daN Travel Spindle horizontal stroke (Z-axis): 550 mm Spindle vertical stroke (Y-axis): 1,500 mm Table traverse stroke (X-axis): 3,000 mm Column longitudinal stroke (W-axis): 1,300 mm Table Size: 1,500 x 1,220 mm Maximum load capacity: 4,000 kg Max contouring torque: 250 daN Hnedpfsxukfqjx Ad Djw T-slots: No. 7, 22 mm, H7 Rapid table rotation: 3 rpm Table clamping torque: 674 daN Speeds and feeds Spindle motor power: 22 kW Speed ranges: 2 Max torque low range: 105 daN Max torque high range: 31 daN Spindle speed range: 15 - 3,000 rpm Constant torque, low range: 15 – 203 rpm Constant torque, high range: 50 – 680 rpm Constant power, low range: 203 – 895 rpm Constant power, high range: 680 – 3,000 rpm Working feedrates: 2 – 10,000 mm/min Rapid feedrates: 10,000 mm/min Maximum axis thrust: 1,600 daN Tool magazine Number of tools: 60 Chain pitch: 140 mm Max tool diameter: 138 mm Max tool diameter (adjacent pockets empty): 400 mm Max tool length (excluding taper): 400 mm Max allowable tool weight: 30 kg Tool holder taper: ISO 50-7388/1 - DIN 69871 Overall weight: 24,500 kg Machine dimensions (L x W x H): 5,350 x 4,770 x 3,700 mm Machine equipped with: • Brushless motors • Through-spindle coolant • Quill stiffener • Heidenhain linear scales • Operation and maintenance manuals

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,500 rpm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, feed length W-axis: 1,000 mm, position of the milling head: 360, table load: 100,000 kg, rapid traverse X-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, table length: 4,500 mm, table width: 3,500 mm, quill diameter: 180 mm, workpiece weight (max.): 100,000 kg, Equipment: rotational speed infinitely variable, BORING MACHINE PAMA mod. SPEEDRAM 2000 Numerical control: Siemens Sinumerik 840D X-axis travel: 13,000 mm Hodoxuq H Uepfx Ad Denw Y-axis travel: 5,000 mm Z-axis travel: 1,200 mm W-axis travel: 1,000 mm Total axial stroke (Z+W): 2,200 mm Working feed on all axes: 8,000 mm/min Rapid traverse X, Z, W: 20,000 mm/min Rapid traverse Y: 15,000 mm/min Spindle: Boring spindle diameter: 180 mm Spindle ram dimensions: 400 x 440 mm Spindle speed (3 ranges): max 2,500 rpm Spindle power (S1): 91 kW Rated spindle torque (S1): 9,050 Nm Boring spindle taper: ISO 50 DIN 69871/2 AD-Type Big Plus Work tables: 2 pieces, each 30 m2 (total 60 m2) Load capacity: 15,000 kg/m2 Thickness: 300 mm T-slot dimensions: 28 H12 - DIN 650 T-slot pitch: 250 mm Rotary-travelling table TH 100: Table size: 3,500 x 4,500 mm Load capacity: 100 tons Longitudinal travel V-axis: 3,000 mm Feed/rapid speed V-axis: 10,000 mm/min Automatic right-angle head mod. TS 35 360: Taper: ISO 50 - DIN 69871/2 Spindle diameter: 128.57 mm Maximum spindle speed: 2,000 rpm Universal head TU 30 360 Facing head platform – UT 5-630 S Platform diameter: 630 mm Slide travel: 200 mm Max rotation speed: 250 rpm Slide feed speed: 1 to 400 mm/min Maximum facing diameter: 1,250 mm Chain-type tool magazine cu 130 r80 Supplied with: - Accessory magazine with 3+1 positions, enclosed fixed type - Wireless probe (Renishaw) - Adaptive technological control - Tool life and twin tool management USED MACHINE

Condition: excellent (used), Year of construction: 1976, Spindle diameter: 100mm Table: 1250x1250 Hjdpfxsxv Sbis Ad Dsnw

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1873, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 1,250 rpm, spindle diameter: 50 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 400 mm Travel range Z-axis: 1,000 mm Hjdpfxexm S N Io Ad Denw Max. spindle speed: 1,250 rpm Spindle diameter: 50 mm Table dimensions: 1,550 x 980 mm With T-slots: 6 MACHINE DETAILS Electrical data Operating voltage: 380 V Rated current: 33.1 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,500 x 1,600 x 2,500 mm Total weight: 8,000 kg EQUIPMENT Chuck Various suitable accessories

Condition: good (used), Year of construction: 2017, Ref. -No.: 10570 Manufacturer: FERMAT Type: WFT 13 R Year of construction: 2017 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 4000 mm Y-Travel: 3000 mm Z-Travel: 1500 mm W-Axis: 730 mm V-axis: 700 mm Bore Spindle Diameter: 130 mm Rotary Table (Lxw): 2000 x 3000 mm Table Load: 25000 kg Tool Taper: SK 50 / ISO 50, DIN 69871 Form AD Tool changer: Robi 105 Spindle Speed: 4000 RPM Rapid Travel X/Y/Z: 20000 mm / min Main Drive: Siemens 41 kW S1 kW Servo drive: 2 Pcs pinion: 2 Pcs Internal cooling: 70 bar handwheel: Heidenhain HR 550 spindle support: 250 mm Ejection height: 900 mm Probe: Renishaw RMP 60 Table Diameter: 4300 / 2000 Ø / mm Hjdsxmd Uiepfx Ad Djnw Rapid traverse V-axis: 10000 m / min Further information: - Vertical control panel with integrated keyboard and 15-inch LCD screen - Master-slave system, max. load 20 t, ROD encoder on the B-axis - Heidenhain optical linear system, absolute for the V, W, X, Y, and Z axes - Machine with increased accuracy - Control cabinet with air conditioning - Automatic lubrication system - Automatic clamping of accessory heads - Hydraulic device - Spindle bearing cooling unit for temperature stabilization - Chip conveyor as segment conveyor with integrated pump for coolant circulation (including level gauge and filtration) - CNC adjustable with paper belt filter - Sump pump with level gauge - Manual milling head UHM 30 with automatic clamping The machine can be viewed under power by appointment.

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Hnodpjxdttisfx Ad Dew - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Features and Technical Data: - Drilling depth adjustment via maintenance-free linear guide - Efficient and economical operation thanks to rapid traverse system; manual cranking is eliminated - Smooth and steplessly adjustable drilling unit - Height adjustment with fine setting and gas spring for weight compensation - Cross travel and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Drilling depth adjustable via scale and stop - Drill head height adjustment can be fully used for vertical slotting - Large-dimension cast iron table with ground surface Motor power: 1.5 / 1.9 kW (2.0 / 2.6 HP) Voltage: 400 V Speed: 1,400 / 2,850 rpm Westcott drill chuck: 0–20 mm Maximum drilling depth: 220 mm Drilling width: 340 mm Height adjustment: 145 mm Hnsdpfx Aoxllwced Dow Drill head swiveling: -60° to +60° Drill table size: 595 × 315 mm Table extension: 2 × 200 × 220 mm Drill table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm (W × D × H) Weight: approx. 240 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Blum hardware hinge drill Minipress Number of drills 5 Mounting of drills with quick couplers Motor power 0,75kw Hodouz Tc Hepfx Ad Dsnw Pneumatic pressure Pneumatic stroke of the aggregate Maximum thickness of workpiece material 40mm

Condition: used, Technical details: spindle diameter: 120 mm x-travel: 1250 mm y-travel: 1250 mm z-travel: 800 mm W-axis (spindle longitudinal): 600 mm Speed of boring spindles: 1- 2000 U/min. spindle taper ISO: 50 table surface area: 1000 x 1000 mm total power requirement: 55 kW weight of the machine ca.: 18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment * Hedjxt El Ajpfx Ad Dsnw

Condition: excellent (used), Year of construction: 1995, used, in good condition, low hours, top equipment Manufacturer: Panhans Model: 116H Year of manufacture: 1995 Machine No.: 640 GS wood dust tested 2-lever operation Drill chuck 20 mm Dowel boring device with 4 stops 45° continuously adjustable mitre fence Mobile 2 pneumatic workpiece clamps Pneumatic height adjustment with foot pedal Hnedpfx Asxgu Uaed Dsw Extraction connection D 100 mm Required space approx. 950 mm x 1000 mm x 1300 mm Weight approx. 200 kg Storage location: 54634 Bitburg, free loaded, unpacked Handover in current condition as inspected without guarantee or warranty

Condition: excellent (used), DETEL M9 Pneumatic Drilling Machine Hjdpfx Adoxnzxbo Donw Pneumatic feed of the unit Adjustable drilling depth Pneumatic material clamping Capable of vertical and horizontal operation Head with 9 spindles Spindle pitch: 32 mm Spindle motor: 1.1 kW

Year of construction: 1991, condition: excellent (used), Frommia long hole drilling machine Type: 770 drill holder : drill chuck with key max. drill diameter : 1 - 20 Hjdpelc Eursfx Ad Dsnw speeds : 2900 rpm max. drilling depth : 145 mm operation : two-hand operation of height adjustment : hand wheel reading of height adjustment : scale clamping cylinder actuation : hand eccentric types of construction : movable drilling head table width : 560 mm table depth : 300 mm working height or feed table height : 900 mm weight approx. : 220 kg dimension : 1200 x 900 x 1200 mm Motor power : 1.5 kW power supply ca. : 400V / 50 Hz / 4.8 A / 2,2 kW Accessories : some drills Location : ex stock 54634 Bitburg - immediately available - subject to prior sale