Used Bottles for sale (1,238)

Condition: used, Year of construction: 2007, Capacity: 18000 bottles/h Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device Laedpexbpdxefx Abnsc

Condition: used, Year of construction: 2000, Bottle filler Manufacturer: Krones Short tube filler with double pre-evacuation Model: Mecafill VKVP 084-094 Year of manufacture: 2000 The capper runs with twist-off and standard crown corks Additional title: Filling and Capping machine Capacity: 30000 Bottles/h Lajdow Tay Aopfx Abnsc Length: 7000 mm Width: 4500 mm Height: 3800 mm Formats: 0.5L NRW, 0.33L Vichy, 0.33L Euro, 0.35L Lemonade Machine partitioning: 84 filling valves, 12 cappers Running direction: right -> left Operation / Control: Simatic Material: mostly stainless steel Position: free standing Base construction: Square frame construction on domes Features: 1 capper for standard and twist off crown caps, 84 filling valves, 12 cappers, protective housing with glass doors, vacuum pump Periphery: Crown cap feed, fill level control,

Condition: used, Hot spraying of the empty bottles from below using nozzles on a 3 metre long cleaning section for pre-rinsing and to reach the filling temperature. Overturning of the bottles at the inlet and outlet of the machine. Equipped with water tank, heater and circulation pump. With dosing connections for water treatment. Additional title: bottle spraying with heatable water tank Capacity of filling line: 5000 bo/h Laedpfow Tmmpox Abnoc Length of cleaning line: 3 m Features: bottle turners; water tank with heater, circulation pump and dosing connections

Condition: used, Year of construction: 1984, with 24 filling valves, frequency-controlled drive. Height adjustment for different bottle sizes. With vacuum supply to the filling vessel by vacuum blower. For filling, the bottles are first lifted via a hydraulically controlled bottle carrier and pressed against the sealing cone on the filling valve. The valve sleeve moves as far as it will go in the valve body, opening the product outlet. The air inside the bottles is discharged through an air tube, creating a vacuum in the bottle equivalent to the vacuum above the product level in the container. The product flows into the bottles by gravity until the fill level reaches the air tube. The bottle is then lowered and the product outlet is closed. Additional title: hot filling Capacity of filling line: 5000 bo/h Number of filling valves: 24 pcs Length: 1,64 m Width: 1,20 m Height: 2,10 m Laedpfx Ajw Tmmvobnec Formats: Round bottles, diameter 60 - 92 mm, height 100 - 265 mm Running direction: left -> right Features: 24 filling valves from stainless steel, height adjustment, vacuum blower

Condition: used, Year of construction: 1990, Bottle filler for approx. 8000 bottles/h Additional title: Filling and capping machine Capacity approx.: 8000 bottles/h Formats: 0.5 l Euro bottle, 0.33 l longneck bottle, 0.5 l goiter neck bottle Position: free standing Lajdpfew S T H Tox Abnsc Features: 1 pre-evacuation, short tube filling, crown cork capper

Year of construction: 1993, condition: used, Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph Additional title: Single-ended machine Capacity: 21000 bo/h Bottles each row: 16 bo/row Ljdpfovcqgzjx Abnsac Length: 8,64 m Width: 4,47 m Height: 1,92 m Weight: 17900 kg Formats: 0,5 l NRW-Bottle Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank Periphery: S5 controll (HMI Lauer)

Condition: used, Year of construction: 2005, Capacity of the bottle filler: 10000 PET bottles/h with 485 ml Flaschen Lajdpfsvcqq Hsx Abnoc Features: Open input vessel, closed vessel with set-up-caroussel, format parts for 500 g and 285 g PET bottles

Condition: used, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33l Euro, 0.35l Frucade and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Unpalletizing system Manufacturer: Radenska & Steinle -Unpacker Manufacturer: SZA Federspiel -New glass lifter Manufacturer: Steinle Fördertechnik -Uncorker Manufacturer: Rink -Bottle washing machine Manufacturer: Krones -Crate washer -Bottle inspector Manufacturer: Krones -Beer preheater Manufacturer: Fischer -Bottle filler Manufacturer: Krones -Crown cap filling bunker with magnetic transport Manufacturer: Gassner -Bottle level control Manufacturer: Metec -Labeler Manufacturer: Krones/Renner -Label control Manufacturer: Miho -Packer Manufacturer: SZA Federspiel -Full crate inspection Manufacturer: Metec -Bottle carrier unfolder -Palletizing and palletizing system Manufacturer: Radenska & Steinle Additional title: with palletising and depalletising, years of manufacture 1993 - 2009 Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Euro, 0,35 L Frucade und 0,5 L NRW Running direction: anticlockwise Operation / Control: mainly Siemens S7 Ledpfx Asvu Tt Ijbnoac Features: Unpacking and palletizing system; unpacker; new glass remover; corker; bottle washing machine; crate washer; bottle inspector; beer preheater; bottle filler; crown cap feeder; fill level control; labeler; label control; packer full crate inspection; bottle carrier erector Layer patterns: 4x20, or 4x24, bottles, 4x8 boxes, 5 layers, on Euro pallet

Year of construction: 2017, condition: used, Empty bottle inspector for monitoring empty glass bottles. The machine uses cameras, high frequency, and infrared to inspect the following criteria: - Contour, height, color - Side wall - Residual lye detection - Mouth - Thread - Residual liquid detection - Bottom inspection - Glass shards and film detection - Sealing surface inspection Bottles that do not meet the specifications are ejected via pushers. Additional title: Straight-running machine in modular design Current: 6 A Voltage: 400 / 230 V Frequency: 50 Hz Water: 3-5 bar Compressed air: 6-10 bar, 1/2" connection Laedpfxeyr Ifko Abnoc Length: 2980 mm Formats: 1,0 l; 0,5 l; 0,2 l Running direction: right -> left Operation / Control: Simatic S7-300 Position: standing on feet Base construction: straight-running Features: camera, side wall modules, test bottle detection, high-frequency and infrared inspection, side opening inspection, thread inspection, sealing surface inspection, light barrier, pushers at inlet and outlet, diversion control, operating panel

Condition: used, Year of construction: 2001, Bottle ejector for removing empty PET bottles from PETCYCLE crates, with attached upward turner. Additional title: PET bottle ejection system Capacity: 4000 crates/h Power: 2,8 kW Current: 8 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar, 1 m³/h Length: 3000 mm Width: 1910 mm Height: 3830 mm Weight: 2500 kg Formats: PETCYCLE 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Lodsx T Ayyopfx Abneac Operation / Control: Simatic S7-300 Material: stainless steel Position: free standing Base construction: Stainless steel square tube construction on spherical feet Features: Infeed or upward turner with protective grid, crate transport, crate guide, bottle ejector, switch cabinet, protective housing with plexiglass panes, staircase and operating platform with railing

Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: -washing machine Manufacturer: Kitzinger Year of manufacture: 2011 Output 1500 - 3000 bottles/h -bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 -swing top sealer Manufacturer: Rico -labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 -laser printer for dating Manufacturer: Domino -bottle collecting table Additional title: Filling line (long-tube filler, various bottle formats, various cappers) Capacity: 3000 bottles/h Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles Features: Kitzinger bottle washing machine capacity 1500-3000 bottles/h; Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine Domino laser printer for dating; bottle collection table Lasdpfx Ajxbnylebnsc

Condition: used, Year of construction: 2003, Empty bottle inspector for glass bottles Additional title: Empty bottle inspection machine Filling line output: 7000 bo/h Power: 2000 VA Voltage: 230 V Ledpfoxbn Uvsx Abnjac Frequency: 50/60Hz Formats: 0,5 l NRW, 0,33 l Steinie, 0,33 l Longneck Operation / Control: Heuft Position: free standing Base construction: Self-supporting housing / machine table, on square tubes with spherical feet

Condition: used, Year of construction: 2009, Inspection system for neck, body and back labels as well as fill level and crown caps Manufacturer: Miho Model: Newton- EC 2001 Year of manufacture: 2009 Additional title: label control for bottles Lsdpfx Aew Tazaobneac Capacity: 30000 Bottles/h Power: 50 W Current: 0,2 A Voltage: 230 V Frequency: 50/60 Hz Length: 3100 mm Width: 1600 mm Height: 1500 mm Formats: 0.5L NRW, 0.33L Vichy, 0.33L Euro, 0.35L Lemonade Running direction: right -> left Position: free standing Base construction: Electronics cabinet on tubular feet with spherical caps Features: Electronics cabinet, measuring devices, fault container rejection

Condition: used, Glass bottle filling line consisting of the following components: 1. Bottle washing machine (separate unit, Silmo, 1982) with a nominal capacity of 2,880 bottles/hour 2. Rinsing, filling, capping and labelling line (IC Filling Systems, 2020) with: - Bottle feed table - Rinser - Counterpressure filler - Capping machine - Bottle exterior washer - Cold glue labelling machine - Bottle discharge table - Free bottle transport Capacity appr.: 1100 bo/h referring to 0,33 l bottles Length: appr. 7 m Width: appr. 4 m Formats: Euro 0.5 l and 0.33 l; crown caps; wrap-around labels and belly labels Running direction: clockwise Base construction: Rinser, filler and capper as a monobloc Ljdpfxsw Ta Ndj Abneac Features: Bottle cleaning machine, bottle feeding table, rinser, filler, capper, bottle exterior washer, labeller, bottle discharge table, beer pump

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy 0.33 Ale and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Depalletizing system Manufacturer: Kettner -New glass remover Manufacturer: Kettner -Empty container control Manufacturer: Heuft -Uncorker/unscrewer Manufacturer: Rink -Unpacker Manufacturer: Kettner -Bottle washing machine Manufacturer: KHS -Crate washer Model: KWZ-20 - No.115 -Empty bottle inspector Manufacturer: Heuft -Bottle filler Manufacturer: KHS -2 closure feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner -Pallet binder Manufacturer: Born -Pallet film wrapper: Manufacturer: Robopac -Pallet labeling Manufacturer: Weber Marking Systems Additional title: Returnable glass bottle filling line Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Ale and 0,5 L NRW Features: Depalletizer; new glass remover; empty container inspection; uncorker/unscrewer; unpacker; bottle washing machine; crate washer; empty bottle inspector; bottle filler; 2 closure feeders; bottle level control; labeler; label inspection; packer; palletizer; pallet binder; pallet film wrapper; pallet labeling Lasdpfx Asvu Tthobnsc

Condition: used, Year of construction: 1991, Nominal capacity of filler: 60000 b/h Power: 10,7 kW Water: max. 4 bar, consumption: 1,3 l/min Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h Length: approx. 2.995 mm Width: approx. 2.370 mm Height: approx. 2.600 mm Lsdpevcqyhefx Abneac Weight: 5200 kg Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm Machine partitioning: 94 mm Operation / Control: Siemens S5 Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection

Year of construction: 2001, condition: used, New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Depalletiser with lifting frame Capacity: 140 layer/h Power: 8,75 kW Voltage: 230/400 Volt Frequency: 50 Hz Compressed air: 5,0 bar; 8,0 Nm³/h Length: 4020 mm Width: 3400 mm Height: 5425 mm Weight: 3800 kg Formats: europalett (1200 x 800 x 140 mm) Operation / Control: control box / Siemens S7 Material: Painted mild steel Position: free standing Lsdpfx Aox T Ai Iobnoac Base construction: Square tube frame Features: Pallet infeed, -outfeed, -magazine; base frame with lift truck, shaft walls, layer pad gripper, clearing table, linear unit, push flap, centring, push-off plate, cardboard lifter, magazine, slip lid magazine, stairs/platforms, protective grille, control system Periphery: Bottle conveyor belts approx. 20 m, pneumatic transport approx. 50 m

Year of construction: 2001, condition: used, PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: PET bottle conveyor system Lsdpfx Aox T Amgebnoac Capacity: 24000 b/h Formats: 0,5, 1,0 l und 1,5 l PET-bottles Material: mainly stainless steel Position: free-standing on the floor / suspended from the ceiling Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors

Year of construction: 2022, condition: used, Packaging machine for packing PET bottles in plastic crates. The machine is set up in a T-layout. The packing curve and cycle times are freely programmable. The machine packs 0.5 l and 1.0 l PET bottles in crates containing 20 or 9 bottles respectively. Retrofitting to other formats is possible. Additional title: Gripper head packer for packing PET bottles into beverage crates Max. capacity: 24000 bo/h referring to 0.5 l bottles Cycle time: 400 cycles/h Number of packing heads 0.5 l: 3 pcs. Number of packing heads 1.0 l: 5 pcs. Power: 13,7 kVA Voltage: 400 V Frequency: 50 Hz Compressed air: 4.5 m³/h, 6 bar, 3/8" connection Laodexykv Tjpfx Abnsc Weight: 2900 kg Formats: 0.5 l and 1.0 l PET bottles; 20-bottle crates for 0.5 l (in a 4x5 arrangement); 9-bottle crates for 1.0 l (in a 3x3 arrangement) Running direction: Longitudinal run for 20-litre crates; transverse run for 9-litre crates Operation / Control: Simatic S7 Material: Base frame, attachments, control cabinet and conveyors made of stainless steel 1.4301 (AISI 304) Position: T-formation Base construction: on base frame with height-adjustable dome feet Features: Gripper head carriers, gripper heads, light barriers, bottle table, bottle guide plates, bottle completeness check, vibrators, frequency-controlled bottle transport, machine safety doors, touch panel with user guidance, control cabinet

Condition: used, Year of construction: 2021, Gravimetric short-tube glass bottle filler with 16 filling valvesand crown cork capper. Controlled via Eaton PLC. Additional title: gravity filling and crown cork capping Lasdpfx Aoxbpchebnsc Capacity: 2800 bo/h max. filling volume capacity 2,200 l/h Power: 4,5 kW Voltage: 380 V Frequency: 50 Hz Compressed air: 14,4 Nm³/h, 5 - 6 bar, 8 mm connection Length: 2,30 m Width: 1,42 m Height: 2,50 m Weight: 1800 kg Formats: Longneck 0,33 l, Vichy 0,33 l, Steinie 0,33 l, Belge 0,75 l - crown corks 26 mm Operation / Control: SPS Eeton Features: 16 filling valves, 1 capping head, beer connection clamp DN32

Year of construction: 2007, condition: used, Additional title: Residual liquid, bottom, mouth, sidewall control Capacity: 32000 bottles/h Power: 3,6 kW Voltage: 400 V Frequency: 50/60 Hz Compressed air: min. 6 - max. 10 bar Length: 2,5 m Width: 1 m Height: 2,5 m Weight: 1700 kg Formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles Lsdpjxbpg Hsfx Abnsac Running direction: right-left Operation / Control: Heuft Features: residual liquid, bottom, body, mouth, side wall

Condition: used, Year of construction: 2000, Complete Mini Dairy Line – Seital 05X Separator + Malldison 1,000 L/h Self‑Heated Pasteuriser + Fords Little Gem 6/2 Glass Pint Bottle Filler Ideal for: Small dairies, farm bottling, cream production, test plants and product development. Line is designed for approx. 1,000 L/h milk processing into glass pint bottles. 1) Seital 05X Cream Separator • Make/Model: Seital 05X disk‑stack centrifuge • Application: Milk clarification / cream separation • Typical capacity: up to approx. 1,000 L/h (depending on product and setup) • Construction: Stainless steel product contact parts • Features: • Designed for continuous operation in dairy service • Compact footprint – suitable for small plants/farm dairies • Complete with bowl, drive and base frame • Condition: Used, in good overall condition; available for inspection • Suitable for: Whole milk separation into cream and skim milk prior to pasteurisation or standardisation. 2) Malldison 1,000 L/h Self‑Heated Pasteuriser • Make: Malldison • Capacity: 1,000 L/h • Type: Self‑heated HTST plate pasteuriser – no separate external boiler required • Product: Cow’s milk (also suitable for similar liquid dairy products) • Key features: Laodpfx Aoy Rk T Asbnec • Plate heat exchanger with regeneration, heating, holding and cooling sections • Self‑contained heating system (self‑heated) for convenient installation • Designed for standard dairy temperatures (e.g. 72–75°C for 15 seconds, depending on setup) • Includes balance tank, pumps and control panel (as pictured / supplied) • Condition: Used, previously in dairy service, offered as is / tested prior to dispatch (as agreed). 3) Fords “Little Gem” 6/2 Glass Pint Bottle Filler • Make/Model: Fords “Little Gem” • Type: 6/2 rotary filler for glass pint milk bottles • Configuration: • 6 filling heads, 2 capping stations (6/2) • Suitable for returnable glass pint bottles • Application: • Filling pasteurised milk into pints for local delivery / farm shop / retail • Compact machine ideal for small to medium‑scale bottling • Features: • Stainless steel contact parts • Adjustable for standard UK‑style glass pint bottles • Simple, robust design with easy operation and cleaning • Condition: Used, good working order when last in production; inspection and test run available by arrangement. Line Summary This package offers a complete small‑scale milk processing and bottling line: 1. Seital 05X – separation of cream and skim milk 2. Malldison 1,000 L/h self‑heated pasteuriser – HTST pasteurisation without external boiler 3. Fords Little Gem 6/2 – rotary filling of glass pint bottles • Approximate throughput: up to 1,000 L/h (depending on product and operating conditions) • Ideal for: farm dairies, local milk brands, glass bottle milk delivery or artisan dairy operations. Additional Services (optional – include what you actually offer) • Loading and packing for transport • Assistance with installation/start‑up emote or on‑site by agreement • Export documentation if required

Condition: used, Used Alfatek Complete Line for Wine 5000 BPH Manufacturer: ALFATEK Year: 2003 Speed (b / h): 5000 Formats: standard Bordolese – light truncated cone Bordeaux – heavy truncated cone Bordeaux – magnum 1,5L Rotation direction: Clockwise Accident prevention: Yes Manuals available: Yes Revisions Available: No Operating status: Function Bottled product: Wine Number of Valves: 24 Fill type: Gravity Type of nozzle: Fixed Isobaric valve: No PLC type: Not Existing Spare parts available: No   Description of the used bottling line: Used Alfatek Complete Line for Wine 5000 BPH: 1) KOMPASS rinser with 16 spouts Lajdpfx Aevguuksbnsc 2) Alfateck filler monobloc composed of 24 taps + 4 Arol capping heads (flush). There are 4 formats available: – standard Bordeaux – light truncated conical Bordeaux bottle – heavy truncated conical Bordeaux bottle – magnums 1,5L 3) Newtec glue labeling machine with two stations 4) APE carton former with Nordson gluer 5) APE case packer 6) taping machine

Condition: used, Used Complete Bottling Line for wine immediately available for sale: This used bottling line is made up of used equipment that can work mainly with still wine. The used Used Complete Bottling line has an isobaric monoblock that allows you to work both slightly sparkling and sparkling wines. Currently, it is used for wines without gas but also for some production with sparkling wine. The cap in this case is a classic aluminium screw. The used Complete Bottling Line wine-filling is completely automatic from the depalletizer to the palletizer. Laodpfxovguphj Abnec The packing of the used line is made with three separate machines that form, box and close the American carton. The operators currently used on the used Complete Bottling Line are 3 plus a quarter for the forklift during loading and unloading. Some used equipment is also delivered to the used bottling line for wine. These are for the standard 0.75 CL Bordeaux. To sanitize the used line, they use disposable steam which still allows the taps \ central part to be washed well. Used wine filling line services: For this Complete Bottling Line used for the wine we can offer disassembly and packaging services, and reassembly in case of need. Furthermore, we can propose a new project for adding bottle format equipment in case of a new bottle shape. A maintenance service can be negotiated for this Complete Bottling Line and implemented in about 75 working days from the confirmation of the order. All replaced parts are warranted except Filters, fuses, lubricants and consumables in general; they are subject to ordinary or scheduled maintenance. The electrical components can be damaged by accidental electric shocks to the control panel and by the interruption of the general control. Damage due to the use of non-original parts. Used Complete Bottling Line for wine subject to prior sale.  

Condition: used, Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. Lodpfx Abevguwlsneac The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filling for still liquids. The washer  is for cleaning the new bottles inside and outside for one-way production. Regular maintenance has been done on all equipment of the line, so it can be reassembled without critical problems. Our professional team can help you realize this project, supporting you both in the tech department and with an engineering consultant.