Used Brian Beckum Log Splitter for sale (29,774)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 4314, power: 15 kW (20.39 HP), Infeed Length : 1800-6000 mm Workpiece width : 75-320 mm Workpiece thickness : 20-165 mm Outgoing Length : 750-6000 mm Waste Length : 400 mm Feed speed up to : 190 m/min Table height : 1000 mm Saw blade diameter : 700 mm Saw motor : 15 kW Saw stroke : 3.6 kW Gkodou Nuh Tepfx Abhod Horizontal & longitudinal feeding conveyors

Condition: new, machine/vehicle number: f044065451f6d849ee7a5b9f8, empty load weight: 5 kg, maximum load weight: 29 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 385 / 65 r 22,5, Further information Chassis semi-trailer forwarding Welded steel construction in reinforced design, only 2 side members as double T-beams with steel/checker plate between the side members, saddle plate with replaceable 2 kingpins. Protective plate for rear lights. 1 steel storage box, recessed between side members 8 pairs of lashing eyes bolted or welded to the frame at the manufacturer's choice 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EC 1 spare wheel holder for 1 e-wheel, with wheel fastening set 8 wooden stanchions of the manufacturer's choice, bolted to frame with 2 wooden stanchions each, telescopic from 1800 to 2800 mm, per pair 7 to. Axles + suspension SAF disk brake axles with 430 mm disk diameter Air suspension with lifting & lowering valve, safety cable on the axles 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle spacing offset mm (combined transport) up to 44 tons gross train weight Wheels and tires 385 / 65 R 22,5 at the manufacturer's discretion Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installed (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Gkjdpfx Absi Rivwshsd Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Front bulkhead/front stanchions Steel/grid bulkhead, approx. 2,300 mm high, bolted to the frame Approval / plates Country of approval: Germany Approval according to EC 2007/46 Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Black coated support legs Front wall hot-dip galvanized Attention: Archive pictures!

Condition: good (used), Log conveyor. Gsdpfx Abjr Ig Dishekd

Condition: used, maximum load weight: 22,590 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 07/1989, DIEBOLT two-axle telescopic semi-trailer with timber loading crane mounted on the gooseneck, loading platform extension to approx. 15,540 mm, Loglift grab, turntable support, 1 x hydraulic extensions, grab control, high-seat control, BPW axle(s), twin tyres, drum brake system, leaf suspension, towing coupling, vehicle may be wrapped and/or labelled with advertising Gedexfpb Eepfx Abhekd

Condition: used, Year of construction: 1989, machine/vehicle number: 1025, arm reach: 13,300 mm, load capacity: 2,300 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 1989 (factory overhaul 2007) Machine number: 1025 Track, m: 3.0 Crane type: OBX IV (year of manufacture 2007) Reach: 13.3 m Load capacity without grab: 2,300 kg / 13.0 m Grapple: included Crane arrangement: behind the cabin Cab side: left Saw: 1.3 m Alpha Gksdev Ddtkjpfx Abhjd Measurement: dividing aid with 2-level measurement Year of manufacture 2007 !! Sold on behalf of the customer!! Available from April 2025

Condition: used, functionality: fully functional, Horizontal block bandsaw BÖGLI ARL150 with hydraulic clamping carriage including complete ALBER sharpening machine with back grinding device. The ideal machine for processing large logs. Cutting thickness is entered via a 'Mudata' control unit. A ripsaw for splitting is mounted directly on the saw frame. Blade wheel diameter: 1,500 mm Blade wheel width: 170 mm Gedexp Hzdepfx Abhjkd Cutting length up to 8 m Max. clearance: 1,900 mm 5 hydraulic clamping fixtures 3 hydraulic log turners Saw drive power: 45 kW Feed drive, frequency controlled: 5.5 kW (wire rope drive) The machine has been professionally dismantled by our skilled personnel and can be inspected in our warehouse by appointment.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. Gsdoxpxyrjpfx Abhekd The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: new, machine/vehicle number: 057736dac221bda3fc469966a, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Fine-grained steel welded construction Slightly sloping outer frame with Load-Lock profile for attaching tension beltsNote! To attach the belts in conjunction with drop sides, the drop sides must be opened! Front gear support leg Folding rear support 2 wheel chocks with holder Galvanized steel underride guard Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 open storage compartment for stanchions, underneath loading area 4 pairs of stanchion pockets embedded in the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centrally recessed in the floor, with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of stanchions W=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Tandem trailer drawbar Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length by 4 x 500 mm from 1800 - 3800 mm, drawbar length set to 1800 mm, (Note! Observe load distribution and drawbar load) Axles + suspension GFA axles with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Screen printing plates approx. 30 mm thick, for high point load capacity Note: Floor warping due to weather influences possible! Platform length approx. 6,200 mm Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Approval / plates Country of registration: Germany With Dekra approval and expert opinion 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Attention: Archive pictures! Gkedpfji Ri H Dex Abhsd

Condition: used, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 24,000 kg, axle configuration: 2 axles, first registration: 07/2013, total length: 2,550 mm, total width: 4,000 mm, suspension: air, tire size: 275/70 R22,5, Equipment: ABS, Ressenig tandem timber trailer | BPW axles | air suspension | tyres: 275/70 R22.5 | 2 pairs of stanchions | drawbar with adjustable length | length: 8600mm–12100mm | Errors, input mistakes and prior sale excepted. Gkodpfx Absxiq Unohjd

Year of construction: 2020, condition: like new (used), Tapered rollers 550mm for log transport solid construction, good condition 2 pieces available roller length: 800 mm Gsdjgvvvlopfx Abhskd roller diameter: 400 mm shaft diameter: 45 mm 2 stationary bearings INA Sprocket: z= 25, zt=30, diameter: approx. 280 mm

Condition: used, maximum load weight: 27,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/1992, Year of construction: 1992, Internal vehicle number: G200183 German vehicle At our yard in Kaufungen - Kassel, immediately available More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English)   Unladen weight 7,300 kg Gross vehicle weight 35,000 kg   Subject to errors   We are happy to accept your used vehicle in trade. Financing available directly with us in-house. Gedpfx Aewcuznobhekd GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: used, maximum load weight: 31,180 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2020, next inspection (TÜV): 01/2023, loading space length: 13,000 mm, total width: 2,550 mm, total height: 1,320 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams Godpoi Rtd Defx Abhjkd * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: new, - Motor power 15kW - Control SPS supported, with two-hand safety circuit Gsdpfxefbx Nbe Abhokd - cutting force 50to - idle speed ca.22,3 mm/sec - Splitting table straight design - cutting channel: - max. length ca.3000mm - max. opening ca.1250mm - machine weight ca.4,8to goods to order price and further information on request

Condition: excellent (used), Fully automated Loghouse milling machine Blockhausfräse BL100ADT for economic production of components used in modern log cabin construction up to maximum dimension 140 x 200mm. Due to the efficient production method with automatic Optimization and multiple lengths (Multilog System) the output from this machine is very high. During each working shift can be produced up to 1200 metres of components for average sized, individual houses. High performance spindle drives and climb milling ensures a clean cut milling contour without being frayed.  Belt conveyer loading system, where the operator puts onto the raw material.  Infeed table with Servo pushing system for fully automated workpiece transport and positioning.  Blockhausfräse BL100 with the working units, drill, wind notch, main notch, log dovetail / straight connection groove head, crosscut saw.  Outfeed table with the pneumatic unloading device.  Workpiece deposit support, where the operator takes off the finished Logs. Gkjdpfxexn Irhj Abhod  Operator panel with IPC for software and machine control.

Condition: used, empty load weight: 5,080 kg, maximum load weight: 18,920 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 11/2022, next inspection (TÜV): 11/2025, suspension: air, tire size: 265/70 R19,5, Equipment: ABS, Schwarzmüller N Series timber trailer | BPW axles | Air suspension | Tyres: 385/65 R22.5 | Good condition | 4 pairs of stakes | Approx. 6.60m loading area | Drum brakes | Subject to errors and prior sale. Gksdpsxfgy Ssfx Abhsd

Year of construction: 2024, condition: new, Log cross conveyor - Number of chain strands according to customer specifications - length and width according to customer specifications - powerful SEW gear motors Gjdpfxehmp Ibe Abhskd - solid pin conveyor chain with gentle rollers

Condition: used, maximum load weight: 29,660 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 10/2004, next inspection (TÜV): 11/2027, Internal vehicle number: G200182 German vehicle On our yard in Kaufungen - Kassel, available immediately More information at: Luis Lucena (German, English, Spanish, French) Viktoria Sologubova (Polish, Russian, Ukrainian, English)   SCHWARZMÜLLER long material transporter 3-axle, permissible total weight: 35,000 kg, empty weight: 5,340 kg, Registered: 2006     Errors excepted   We are happy to accept your used vehicle as payment. Financing is possible directly from us. Gksdjuz Nlwspfx Abhod GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: used, axle configuration: 3 axles, first registration: 07/2015, Equipment: ABS,

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m Gksdpfxjv Dvhyo Abhjd The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: used, empty load weight: 5,740 kg, maximum load weight: 32,260 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2021, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Schwarzmüller timber semi-trailer 3-axle | SAF axles with disc brakes | Unladen weight: 5,740 kg | Payload: 32,260 kg | Lift axle | 8 pairs of stakes | Tyres: 385/65 R22.5 | Valid inspection certificate until 01/2026 | Subject to errors, input mistakes, and prior sale. Gjdpjxdn Hdjfx Abhekd

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin Godegvu Aljpfx Abhskd - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Condition: used, maximum load weight: 22,670 kg, overall weight: 27,000 kg, axle configuration: 3 axles, first registration: 02/2022, next inspection (TÜV): 11/2027, Year of construction: 2022, Internal vehicle number: G300386 German vehicle Available immediately at our yard in Kaufungen – Kassel Further information from: Luis Lucena (German, English, Spanish, French) Viktoria Sologubova (Polish, Russian, Ukrainian, English) Gsdpfx Abjxnulhjhekd Subject to errors and changes. We are happy to accept your used vehicle as part-exchange. Financing available directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, axle configuration: 3 axles, first registration: 07/2015, Equipment: ABS,

Condition: new, empty load weight: 6,180 kg, maximum load weight: 32,320 kg, overall weight: 38,500 kg, axle configuration: 3 axles, total length: 25,500 mm, total height: 119,400 mm, suspension: air, front tire size: 385/65 R22.5, rear tire size: 385/65 R22.5, Equipment: ABS, MEGA 3-axle timber / log trailer | Permissible total weight: 38,500 kg | Unladen weight: 6,180 kg | Payload: approx. 32,320 kg | Length: 11,940 mm | Width: 2,550 mm | 3rd axle: lift axle | Tyre size: 385/65 R22.5 | Aluminium side guard and toolbox | Air suspension and disc brakes | Loading length: approx. 11.94 m | Stake height: approx. 2.50–2.60 m | Subject to errors, input mistakes and prior sale Godpfoxdfciex Abhekd

Condition: used, maximum load weight: 15,730 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 01/2021, next inspection (TÜV): 11/2027, Year of construction: 2021, Internal vehicle no.: G300385 German vehicle Available immediately at our yard in Kaufungen - Kassel More INFO from: Luis Lucena (German, English, Spanish, French) Viktoria Sologubova (Polish, Russian, Ukrainian, English) Unladen weight: 3,270 kg Loading area: 6,500 mm Drum brakes Gkedpjxnuk Rsfx Abhed Subject to errors and omissions We will gladly accept your used vehicle as a trade-in. Financing available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.