Used Briquette Press Log Splitter for sale (50,281)

Year of construction: 2018, condition: good (used), functionality: fully functional, in total 7 FMTM250-7HS-32P FUSEI mold presses, year of manufacture 2011-2018, and also some Fujiwa mold presses, vintage 2002-2005 available Itjdpfjxniklex Agzor

Year of construction: 1985, condition: excellent (used), This presss is part of a two automated production lines for automóviles pannels, each line consist of five presses, 1x1600 Ton, 2x1000 Ton, 2x500 Ton, plus robots an federes, we can del the complete Line as apackage or each Press individually, all are KOMATSU Stamping Class A. Iedpefxx E Ssfx Agzetr

Condition: used, Year of construction: 1992, pressure 80 t stroke 40 mm no. of strokes 60-300 Hub/min table surface area 730x750 mm Iodpfx Aewz Rv Eogzstr weight of the machine ca. 14 t

Condition: used, machine/vehicle number: YV2A4BAD4XA29xxxx, mileage: 1,244,000 km, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 21144 Specifications – Volvo FH16 (1999): Year: 1999 Mileage: approx. 1,263,000 km EU approved until: 30.11.2026 6x4 Wheelbase: 430 / 138 cm 520 hp Engine brake Suspension: parabolic Manual gearbox Tires (see photos) Equipment and Condition: Extra wiper heating Front tires are very worn Thermostat replaced Instrument cluster malfunction Fuel gauge not working Central lubrication Liftable axle All belts recently replaced in workshop Valve cover replaced by owner Rear flatbed replaced by owner 400-liter diesel tank Ready for delivery Briab grain trailer (1983): Year: 1983 EU approved until: 19.06.2026 3 axles Length: 1010 cm Air bellows replaced Tipper ABS fault (owner says it’s due to a sensor) Ready for delivery Narko timber trailer (1981): Year: 1981 EU approved until: 30.06.2026 Left rear brake band replaced Faulty sensor Ready for delivery Itsdew Ruxzjpfx Agzjr Cranab CRX 10 t/m crane (1993): Certified until July this year New diesel heater Cabin...

Condition: used, Year of construction: 1995, operating hours: 176 h, functionality: fully functional, machine/vehicle number: 620414, Size 53 x 74 cm, CPC 1-04, CPtronic, Autoplate, Alcolor dampening system, Technotrans cooling and recirculation unit, all washing devices, Alphatronic 200 powder spray unit Itjdpfxjx I A Sle Agzjr

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: V85 Isdpfx Ajx I N Awegzetr Capacity: 2050 x 85 tons Delem CNC control CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Year of manufacture: 2005 Without tools

Condition: ready for operation (used), Year of construction: 2023, This ORMA NPC/DIGIT 6/95 30/13 AS-BO was manufactured in 2023. A used hot press, it features a press area of 3000x1300 mm, six cylinders, and a maximum press opening of 400 mm. It delivers a total pressure of 90 tons and includes an 18 kW electro-heater for thermo-oil heating up to 120°C. Consider the opportunity to buy this ORMA NPC/DIGIT 6/95 30/13 AS-BO veneer press. Contact us for more information about this machine. Application Types Iodpox D Ngljfx Agzjtr Pressing / Laminating

Year of construction: 1985, condition: excellent (used), This presss is part of a two automated production lines for automóviles pannels, each line consist of five presses, 1x1600 Ton, 2x1000 Ton, 2x500 Ton, plus robots an federes, we can del the complete Line as apackage or each Press individually, all are KOMATSU Stamping Class A. Isdpfx Agofxx E Iezjtr

Condition: ready for operation (used), Camu decoiler 3 ton Dimeco straightener - 800 x 1,1 mm - 11 x 60 mm straightening rolls - 4 x 60 mm feeding rolls - weight: 850 kg CNC mircrofeeding unit Pressix excentric press - 100 ton - 65 strokes/min - adjustable stroke: 10 130 mm - table: 950 x 660 mm - max opening: 370 mm Iodpfx Agex Imlpozotr

Condition: used, machine/vehicle number: YV2RT60G7KA83xxxx, mileage: 431,205 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 19523 Specifications: - 2019 model - 431,205 km - i-Shift - Euro 6 - 551 HP - 8x4 - Retarder - Lift on 3 axle - Tires (see pictures) - Suspension: full air - Hydraulic outlet - 2016 Palfinger crane - Crane Certified to: 11/25 - 8 meter range - Timber clip Ijdpfx Agjvyftkezetr - Support legs - Air conditioning/AC - Auxiliary light - Cowcatcher - Coffee maker - Heated mirrors - Diesel heater - Refrigerator - Aluminum rims - Radio - Videos - Ready for delivery Description: The timber truck has EU approval until 18.07.25 and the crane is certified until 11/25. The truck shows signs of being well maintained by the owner. Everything functions as it should according to the owner and can be put to work straight away. Ready for delivery. For more information, price, and photos, see the listing on our website: Km: 431205 HK: 550 Technical approved: Yes EU-approved until: 23.07.2026 Own weight: 12650 Total Weight: 42000 Payload: 29275 Width: 255 Length: 952 Euro: 6 Model: Fh540 8x4 Tømmerbil m/ 2016 M110L80 Palfinger krane og tømmerklype

Condition: excellent (used), Year of construction: 1996, functionality: not functional, machine/vehicle number: 1439, Size 36 x 52 cm, standard dampening, N+P unit Itedpfjx I A Ruex Agzsr

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 3 meter CNC press brake by Safan Model: DNCS 110 3100 Capacity: 3100 x 110 tons CNC controlled axes: Y1, Y2, X, R, Z1, and Z2 Isdpfx Agjx I Nzyezstr Manual crowning 1 set of tooling Upgraded ESA 630 CNC control New laser safety system

Condition: good (used), Year of construction: 2007, Marca: SCHIAVI Modelo: HFBs 100/ 3 Itjdpjxaz Igjfx Agzsr Nominal capacity: 100 tons Table length: 3110 mm Work table width: 90 mm Working height without rise: 910 mm Maximum distance between tables: 450 mm Maximum nominal stroke: 250 mm Gooseneck depth: 405 mm Distance between uprights: 2700 mm Maximum pressure: 303 MPa Oil capacity: 126 dm³ Maximum length (footprint): 4000 mm Motor power: 7.5 kW

Year of construction: 1985, condition: excellent (used), Stamping Press used in the fabricación of vehiclís, 2 fully automated lines, each consist of 5 preses, 1x1600 T, 2x1000 T, 2x500 T, with robots, can be sell as complete line or individually Itodefxxu Tepfx Agzer

Condition: ready for operation (used), Tecnoma-lijn voor de productie van installatiehaken voor industriële goten 1 - Afrolinrichting 2 ton maximale breedte: 30 mm binnen- en buitendiameter van de spoel: 508 / 1600 mm hydraulische uitzetting van de klauw: 460 640 mm 1 kW Itjdjx Impnspfx Agzsr 2 - Voederbak 3 - Rolvormstation maximale dop: 2 mm 2,2 kW 4 - 3 ponsstations 5 - Buigen en knippen Klik hier om de Tecnoma-rolvormlijn voor industriële goten te bekijken.

Condition: used, machine/vehicle number: YV2R0P0D5NA88xxxx, mileage: 330,000 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 22080 Itjdpfx Ajx Izq Tegzor Specifications: EU-approved until 18.11.2026 Model year: 2021 Mileage: 330,000 km (may increase slightly) Automatic transmission Crawler gear Euro 6 Bergfegen body from 2016, ExTe A9 2.8 m Aluminum rims Length: 1,070 cm Width: 255 cm Wheelbase: 460 cm Curb weight: 15,960 kg Drivetrain: 6x4 Power: 751 hp LED light bar Sleeper cab Radio/CD Climate control / A/C Crane specifications: Model year: 2019 Epsilon M12 Electric control with mini joysticks Water heater Reach: 8.3 meters Description: 2021 Volvo FH16 750 timber truck.The truck is recently EU-approved and currently in daily operation, so mileage may increase slightly.Equipped with a Bergfegen body from 2016 and an Epsilon M12 crane from 2019.Available for delivery on short notice. Km: 330000 HK: 750 Technical approved: Yes EU-approved until: 18.11.2026 Own weight: 15960 Total Weight: 32000 Payload: 15965 Width: 255 Length: 1070 Euro: 6 Model: FH16 750 6x4 Tømmerbil m/ Epsilon M12 kran Gearbox: Automatic

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 1772, Size 36 x 52 cm, standard dampening Iedpex I A N Rofx Agzotr

Condition: used, functionality: fully functional, Year of construction: 2011, Used 3 meter CNC press brake Model: E Brake 100 3100 Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1 and Z2 CNC controlled TS1 CNC control Year of manufacture: 2011 Wila hydraulic tool clamping Ijdpfjx I Nzgox Agzstr Available directly from January 7

Condition: used, Year of construction: 2012, operating hours: 25,000 h, total length: 5,250 mm, total width: 2,350 mm, total height: 2,750 mm, Weight: 12.500 kg Price: On request - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7336127126 - Operating hours: 25000 - Drive system: CNC - Control system brand: Cybelec - Control system type: DNC-880S - Power [kW]: 18.5 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 175 - Max. working width [mm]: 4050 - Column gap [mm]: 3600 - Max. stroke [mm]: 255 - Control type: DNC 880S Iedewmf Efopfx Agzstr - Control: CNC - Transport dimensions: 5250mm x 2350mm x 2750mm (l x w x h) - Transport weight [kg]: 12500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baler Paal Konti 325 D/SO, Year of Manufacture 1999 Technical Specifications: Manufacturer: Paal Model: Paal Konti 325 D/SO Year of Manufacture: 1999 Operating Hours: 50,702 Pressing Force: 94 t Total Connected Load: 128 kW Filling Opening: 1020 x 1750 mm Bale Dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale Weight: 525 to 800 kg Transport Dimensions: approx. 12,352 x 2,340 x 2,800 mm (LxWxH) Machine Weight: approx. 28,000 kg Itjdpfx Agex I D N Sezsr Materials: Paper, cardboard, lightweight waste, plastic waste Notes: The baler is currently still in operation. Dismantling is scheduled for January 2026. Inspection under operating conditions is possible. The conveyor belt shown in the images is not included in the scope of delivery. Please note: All technical data are based on the manufacturer’s information. We accept no liability for the stated information or for possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by prior arrangement. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: ready for operation (used), Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm Itedeb A Nkbopfx Agzjr -Insertion height: 650 mm -Insertion width: 275 mm -Dimensions: 1300/900/H3200 mm -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg

Condition: used, mileage: 716,000 km, Year of construction: 2014, Serial number: YV2RZZ0D7EA75xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22010 Specifications: EU approved until 30/06/2026 Mileage: 716,000 km Gearbox: Automatic Retarder Full air suspension Euro 5, 751 hp 2 bunks 6x4 Tow hitch VBG Tires (see photos) Webasto heater 2 sleeping bunks Radio/CD Climate control / AC Refrigerator Ready for delivery Description:Volvo FH750 6x4 timber truck.The truck is sold without a crane, but with bunks.It is EU-approved and ready for delivery. Km: 716000 HK: 749 Technical approved: Yes EU-approved until: 30.06.2026 Own weight: 12790 Itsdpfx Aex E Nm Dogzjr Total Weight: 32000 Payload: 19135 Width: 255 Length: 967 Euro: 5 Model: 2014 Volvo FH750 6x4 Tømmerbil. Uten kran Gearbox: Automatic

Condition: excellent (used), Year of construction: 2018, Very neat used press brake from Durma Type AD S 40320 Capacity 4050 x 320 tons Iodpfx Agsx I A Efezotr Delem DA 69T control CNC-controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, and Z2 (3D back gauge) Hydraulic Wila NS upper and lower clamping CNC crowning

Condition: good (used), functionality: fully functional, Year of construction: 2018, Full-option CNC press brake from Durma Model: AD S 40320 Capacity: 4100 x 320 tons Delem DA69 3D graphical control Itjdpfx Agjx Ivnmszsr Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC-controlled Wila hydraulic upper and lower clamping Wila crowning system Akas Fiessler laser safety Year of manufacture: 2018

Condition: good (used), functionality: fully functional, Year of construction: 2016, Used Durma CNC press brake Type: AD Servo 30175 Capacity: 3050 x 175 tons Cybelec ModEva 15T CNC control CNC-controlled Y1, Y2, X and R axes CNC crowning Akas Fiessler laser safety Includes tooling set Itodpfx Aex Iflzsgzor