Used Bsb 600 for sale (10,996)

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. Technical Data  Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functional drinks Filling system: isobaric probe filling with electronic level control Fill range: 12 oz – 24 oz containers Labeling system: cold glue labeling Bottle detection: integrated bottle burst detection system Construction: all stainless steel, high-hygiene design Cleaning: automatic CIP capability Operation: touchscreen HMI with recipe and product management Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) Note: frequency / voltage converter required for non-US markets Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  Depalletizer | KOSME / Semidepal | 2015 Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 Bottle Conveyors | KOSME | – | Included | 2015 Additional Information Manuals included Basic tooling and format change parts for 12 oz and 22 oz included Additional documentation available upon request All conveyance lines included Dismantling team available to supervise reinstallation and recommissioning Utility specifications (air, CO₂ / gas) available upon request Gsdpfx Aboyigigorstu

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 7,473 h, load capacity: 5,000 kg, lifting height: 4,100 mm, fuel type: diesel, mast type: simplex, construction height: 3,050 mm, drive type: Diesel, Diesel Forklift Mast Type: Standard Condition: Ready for use and fully functional Technical Condition: Good Gsdpfsyh R Uksx Abrotu 3rd valve, 4th valve, heating, soot filter, full cab, air conditioning,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 7,335 h, load capacity: 5,000 kg, lifting height: 4,100 mm, fuel type: diesel, mast type: simplex, construction height: 3,050 mm, drive type: Diesel, Diesel Forklift Mast Type: Standard Condition: Ready for use and fully functional Technical Condition: Good Gtjdpfxjyh R Udj Abrou 3rd valve, 4th valve, heating, soot filter, full cab, air conditioning,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,580 h, load capacity: 5,000 kg, lifting height: 4,100 mm, fuel type: diesel, mast type: simplex, construction height: 3,050 mm, drive type: Diesel, Diesel Forklift Mast Type: Standard Condition: Ready for use and fully functional Technical Condition: Good Gtodpfjyh R T Hsx Abrsu 3rd valve, 4th valve, heating, soot filter, full cab, air conditioning,

Condition: used, Year of construction: 1997, x-travel 600 mm y-travel 500 mm z-travel 450 mm Control Heidenhain TNC 426 PB tool change unit 22-fach tool taper SK40 Gjdeykb Hljpfx Abretu turning speeds 5-6.300 U/min table-size 900 x 530 mm table load 400 kg total power requirement 9 kW weight of the machine ca. 3550 kg dimensions of the machine ca. 2,2 x 2,7 x 2,05 m 3-axis vertical machining centre MIKRON UM 600, built in 1997 In excellent technical condition, all guides have been freshly scraped. The spindle has been re-mounted and has since been used for only 262 hours. New power unit for spindle drive installed. Accessories: Heidenhain TS 642 touch probe system 2 new vices SK40 tool holder

Condition: good (used), Year of construction: 2012, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 6.934 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.050 cm Gjdpfx Aev Ti Rgjbrstu CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1370 m Max swing of arm in degrees: 175 Transport dimensions (LxWxH): 8,15x3,15x2,54 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: E600JP Year of build: 2012 Condition: Used Data: Max. working height: 20,51 m Platform height: 18,51 m Max. reach: 13,70 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,83 x 0,76 m Swivel range: +/- 175° Overhang: 1,25 m Gradeability: 30 % Total dimensions LxWxH: 10,10 x 2,41 x 2,54 m Transport position LxH: 8,15 x 3,15 m Movable up to working height: 20,50 m Wheel pressure max.: 60 kN Ground clearance: 0,29 m Drive type: Battery Empty weight: 7.377 kg Special features: Rotating work basket, basket arm/vertical rotation angle -40°/+100°, all-wheel drive, white tires, differential lock, cross boom, very long work cycles possible

Condition: used, Year of construction: 2008, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 7.651 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.050 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1370 m Transport dimensions (LxWxH): 101x241x254 Production country: US Godpfov Ti H Uox Abrjtu Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: E600JP Year of build: 2008 Condition: Used Data: Max. working height: 20,51 m Platform height: 18,51 m Max. reach: 13,70 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,83 x 0,76 m Swivel range: endless Gradeability: 30% Transport dimensions LxWxH: 10,10 x 2,41 x 2,54 m Movable up to working height: 20,46 m Wheel pressure max.: 60 kN Ground clearance: 0,29 m Drive type: Battery Length of transport position: 8,15 m Height transport position: 3,15 m Overhang: 1,25 m Empty weight: 7.651 kg Special features: Rotatable work basket, basket arm vertical rotation angle -40 / + 100 °, four-wheel drive, differential lock, white tires, cross-trunk pendulum axle

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 540 mm, table length: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm. Machine Benefits Technical Machine Benefits • Spindle nose to table top: 145-685 mm Gsdpfxjyi Eg Hs Abrstu

Condition: ready for operation (used), Year of construction: 2024, operating hours: 1,800 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,080 mm, total width: 2,620 mm, wire diameter (max.): 0.3 mm, overall weight: 3,300 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5s Sodick VN 600 Q wire edm machine was manufactured in 2024. It features a maximum workpiece weight of 1,874 lbs and advanced capabilities such as high-speed automatic wire threading and improved surface finish circuit for smoother machining. With a robust design and user-friendly software, consider the opportunity to buy this Sodick VN 600 Q wire edm machine. Contact us for further details. • Hours: 1,800 • U/V-axis travel: 3.54" x 3.54" (90 x 90 mm) • Wire diameter range: 0.004"–0.012" (0.10–0.30 mm) • Work tank dimensions (W x D): 40.94" x 30.71" (1040 x 780 mm) • Maximum workpiece weight: 1,874 lbs (850 kg) • Distance from floor to table: 36.61" (930 mm) • Fixed Jet High Speed Automatic Wire Threading (AWT) • Improved Surface Finish Circuit — smoother machining finish • High Speed Electrolysis-Free Power Supply • Advanced Tension Servo Control — stable wire tension control • Ceramic machine components — improved thermal stability & wear resistance • Wire Tip Disposal Unit — automatic waste handling Godpfxeyi Dwke Abrotu • Z-axis automatic dielectric fluid level control • Motion controller — precision axis control system • On-board user-friendly Heart NC software • Remote hand control + mouse • USB & LAN connection ports — data transfer and networking • Energy saving circuit — reduced power consumption • Built-in voltage stabilizer — stable power input Dimensions Machine Depth 2605 mm

Condition: new, functionality: fully functional, Features of the system: 1. Chain conveyor belt, 2.9 meters in length (other lengths available upon request) 2. Two custom-made units with fixed form shoulder, tailored to product dimensions 3. Single film loader + automatic film centering device 4. Box motion end sealing unit with single sealing jaw 5. Robust, central fin seal structure 6. Eight servo-driven actuators 7. HMI control panel 8. Four individual temperature controllers 9. Stainless steel 304 housing 10. Documentation in the local language Gtodpfek Dz Hwox Abrou 11. Print mark control 12. Programmable bag length 13. Standard direction of operation: left to right Technical parameters: 1. Product length: L120-600mm 2. Product width: W70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products per minute (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph, 220V, 50Hz 7. Overall power: approx. 8.8 kW 8. Machine weight: approx. 1100 kg 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm

Condition: used, Year of construction: 1987, cutting dimensions max. 600 x 1000 mm plate thickness max. 3 mm cutting angle 1,5 ° side stop electrical adjustable 0 - 1010 mm Gsdpfx Abstqql Iorstu rear stop electrical adjustable 0 - 610 mm no. of strokes 60 Hub/min total power requirement 14 kW weight of the machine ca. 8,7 t dimensions of machine L x W x H 2,5 x 2,18 x 2,3 m Accessories: sheet metal stacking device on rails

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1033618, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, torque: 600 Nm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,800 mm, total length: 2,900 mm, total width: 2,600 mm, table width: 500 mm, table length: 700 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 10,871 h, number of slots in tool magazine: 24, mount diameter: 40 mm, tool weight: 6,000 g, MIKRON VCE 600 PRO CNC vertical machining center - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 32 A - Power connection: 16 kW - Tool holder: ISO 40 - Spindle motor power: 12 kW Gtjdpfx Aoyiznaebrou - Torque at 100%: 600 Nm - Tool change time: 6 sec - Chip-to-chip time: 8 sec - Number of slots: 5 - Slot spacing: 100 mm Note: Without the tool holders shown in the photos! FCA D-73235 Weilheim Teck – loaded onto truck

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 Gtjdex Ahl Djpfx Abrju - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,927 h, load capacity: 4,000 kg, lifting height: 4,675 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 mm ISO class: ISO class 3 = 2,500 – 4,999 kg Mast type: Triplex Technical condition: good Front tire type: superelastic Front tire condition: 40 - 60% Rear tire type: superelastic Rear tire condition: 40 - 60% Battery voltage: 80V Battery type: PzS Battery year: 2024 Gtsdsyhr Rcepfx Abrou Equipment: side shifter, fork positioner, 3rd valve, 4th valve, front work lights, half cab, full free lift,

Condition: used, Technical details: faceplate diameter: 5000 mm swing diameter: 6100 mm turning height: 2400 mm ram stroke each side: 1490 mm ram head dimension: 340 x 340 mm max. workpiece weight: 100.000 kg total power requirement: 100 kW weight of the machine ca.: 155 t faceplate turning speed range: 0,4 - 50 U/min Gtjdpfxsw Rz U Ae Abreu with 2 x 2 axes CNC SIEMENS 840 D *

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Gtjdpfx Abji Uli Ejrsu

Condition: used, all stainless steel Gjdoyglivopfx Abrstu nett belt length 4.500 mm nett belt width 600 mm overall dimensions (l x w x h) : ± 7.400 x 1.900 x 3.150 mm suitable for thermic oil heating (= 214 kW) with top hold down belt adjustable speed sediment removal system electrical hoists

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,160 h, load capacity: 5,000 kg, lifting height: 6,016 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 3,100 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Superelastic Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire condition: 20 - 40% Battery voltage: 80V Battery capacity: 840Ah Battery year: 2018 Sideshift, fork positioner, telescopic forks Godpfx Ajyhiiisbrotu 3rd valve, 4th valve, rear work lights, front work lights, heater, load guard, full cab,

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Gsdpfxemrrwfs Abretu Please note that the photos probably show two different ovens, both are very similar.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 1,263 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, construction height: 220 mm, power: 13 kW (17.68 HP), battery voltage: 80 V, Equipment: cabin, pallet forks, sideshift, Electric Forklift LINDE E30-02 / 600 Year of manufacture: 2010 (battery from 2024) 3 tonne lifting capacity 2.22 m overall height 4.70 m lift height - NEW BATTERY IN 2024! - Triplex free lift mast - Side shifter - 4th hydraulic circuit - Working lights - White tyres - Nice condition forklift - Immediately ready for use - Incl. 80V charger Sale price: 8,800,-- net Cost-effective delivery possible! Gedpeykh Txjfx Abrstu

Condition: excellent (used), CTS Temperature Test Chamber We offer you here a CTS temperature test chamber. Water-cooled Model series: T-40/600 Including metal support bars to increase floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Godpfx Abeygup Ssrotu Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 Important information for you as a buyer! The following steps are carried out on all our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refilled with legally-compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored by calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the data!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Temperature Test Chamber We are offering you a CTS temperature test chamber. Water-cooled CTS Temperature Test Chamber Technical specifications: Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 3.5 K/min Temperature stability, temporal: ≤± 0.3 K Dimensions: Test volume: 600 liters Test chamber internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Connected load: 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg Model: T-70/600 Important Information for Buyers! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Technical data, specifications, and information are subject to change and errors!) If you have further questions, we are happy to answer them by phone. Gtsdpfx Aboygupforju

Condition: excellent (used), We are offering a temperature test chamber here. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Gtedsygunhepfx Abrju Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: used, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-cooled Performance Data for Temperature Tests: Temperature range: -5°C to +90°C Temporal temperature fluctuation: ±0.1 to ±0.5 K Gsdpoygum Dsfx Abrstu Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Performance Data for Climatic Tests: Temperature range: +10 to +90°C Humidity range: 10 to 98% r.h. Temporal temperature fluctuation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temporal humidity fluctuation: ±1 to ±3% Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Access Ports: 1 access port Ø 50 mm on the left side installed 1 access port Ø 125 mm on the right side installed Power Supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Refrigerant: R 404 A Capacity: 600 liters Weight: 540 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Gtsdpfx Abeygultsrou Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.