Used Bts 200 for sale (16,901)

Year of construction: 2017, condition: used, working width 200 mm mains connection 400 V / 50 Hz rated current 25 A connected load 10 kW Through-feed grinding machine with extraction system Condition: Used Dwedpfx Absz Ic Axs Njc Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors regarding technical data and specifications; subject to prior sale.

Condition: excellent (used), Year of construction: 1998, Extraction system Manufacturer: Schuko Dwjdjz Iq H Espfx Ab Noc Type: Vacomat 200 Year of manufacture: 1998 Volume flow rate: max. 2,950 m³/h Negative pressure: 2,200 Pa Power: 3.7 kW Extraction nozzle diameter: 200 mm Cleaning: mechanical

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 5470, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 200 t, stroke length: 250 mm, table width: 250 mm, table length: 3,000 mm, table height: 800 mm, throat depth: 300 mm, ram plate length: 3,000 mm, distance table to ram: 500 mm, clearance between the columns: 2,550 mm, total length: 3,500 mm, total width: 2,000 mm, total height: 3,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Force: 2000 kN Working length: 3000 mm Distance between uprights: 2550 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 300 mm Dwjdpszzxduofx Ab Nsc Table width: 250 mm

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Dwjdpfxoz Iy Nco Ab Nec Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Z-axis: 200 mm, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes Dsdpfx Aoz Iy H Isb Newc - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: used, Year of construction: 2010, 2010 Mahler HWE 4400/2000/4400 Tempering Bogie Hearth Furnace With Pro Therm (Siemens PLC) Control & Switchgear Usable Chamber Approx Dimensions L4,400 x W4,400 x H2,000mm. Holding Time At 600°C 3–4h. Temperature Uniformity (After 4h Hold) +/- 5K. Batch Weight 15t. Furnace Atmosphere Air. Material Of Parts Steel. Heating Electric. 8 Heating Control Zones. 7 Air Circulation Fans. Installed Heating Capacity Approx 1,680kW Bogie (Car) Approx Travel Speed 50mm/s. Bogie (Car) Approx Load Capacity 15t. Number Of Doors 2. Surface Losses Approx. 30kW. Exhaust Air Volume Flow Approx. 1,000–1,200 m³/h. Exhaust Air Temperature Approx. 250 °C. Max. Ambient Temperature 40 °C. Mains Voltage 3 x 400 V Control Voltage 230 V AC / 24 V DC. S/No. 241 09 (2010). Dwedpjz Nh Drefx Ab Nsc

Condition: used, all stainless steel twin shaft paddle mixer Dedpfx Ajz Nd Iteb Newc intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard 18 kW

Condition: used, Year of construction: 2020, Manufacturer: Marel Model: Active Mixer 200 Dwedpfx Aboz Er Das Noc Year: 2020 Condition: Used Serial number: 10446009 Stock number: 3302 Mixer capacity: 200 litres Water pressure: 2 - 5 Bar Power: 3 x 400V, 50Hz, 7kW Dimensions: 1250 x 950 x 1800 mm Weight: 400 kg Semi-automatic tempura and batter mixer with programmable recipe management.

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Dwjdpfx Asz A Aw Ssb Noc

Condition: excellent (used), Year of construction: 2007, operating hours: 38,500 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/50 TECH Baujahr: 2007 Schließkraft: 50 Tonnen Holmabstand: HOLMLOS Schnecken DN: 30 mm Spritzteilgewicht 70 g/PS Steuerung: CC200 Ausstattung: Dwsdpfx Aez Nxiljb Nec -1 x Kernzug hydraulisch

Condition: used, Year of construction: 2012, functionality: fully functional, Control system: Matrix II Travel ranges: X-axis 207 mm X2-axis 141 mm Y-axis 100 mm Y2-axis 70 mm Dwedoz Dtmgopfx Ab Nec Z-axis 760 mm Z2-axis 815 mm Main spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Counter spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Tool turret: Number of tool positions 24 Max. speed of driven tools 6,000 rpm Tool stations 24 Driven tool stations 24 2 pcs. 12-position turret Max. turning diameter: Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Max. swing diameter: Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Additional equipment: Bar feeder LNS Robot interface Automatic door Tool setter on the right and left Chip conveyor, discharge to the right Separate coolant system 15 bar high-pressure pumps Coolant temperature control

Condition: used, Year of construction: 1992, Belt grinding machine with return mechanism, self-built used good condition cleaned functionality tested Manufacturer: Löwer Type: LS 200 Year of manufacture: 1992 Machine no.: 7909 Number of belt units: 1 Belt oscillation: mechanical / pneumatic: pneumatic Feed rate m/min, stepless: 8 m/min Belt length approx. mm: 1600 Belt width approx. mm: 200 Motor kW: 5.5 Grinding width approx. mm: 200 Grinding height approx. mm: 120 Dust extraction connection mm: 140 Space requirement approx. L x W x H mm: 2000x900x1800 Weight approx. kg: 380 Dwjdpfxsz It I Es Ab Njc Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee and warranty

Year of construction: 2022, condition: used, KOLBUS Box Production Line BLT 200 + BLW 200 year 2022 For the automatic production of raw boxes from cardboard blanks as well as the lamination of the boxes. The BLT 200 is used for uprighting punched and grooved cardboards and the BLW 200 is used for laminating boxes. Overview: BLT 200 box line taper BLW 200 box line wrapper Configuration: BLT 200 box line taper · copilot system with touch screen · cardboard feeder · uprighting channel · 4 heat-sealing tape stations · 2 sets of knives (4 pcs. each) · 2 sets of counter knives (4 pcs. each) · servo-controlled drive technology based on Siemens technology · delivery incl. inline coupling with box line wrapper BLW 200 Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 3 mm cardboard thickness min.: 1 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm BLW 200 box line wrapper · copilot system with touch screen · cloth feeder · hot gluing station with premelter · glue application adjustment from the outside Djdpfx Aoz E Npmob Nswc · viscosity controls · buffer zone for feeding the boxes · cloth transport with vacuum conveyor · camera system for precise positioning of the boxes on the cloth · robot for positioning the boxes on the cloth · rub down station · 4 laminating stations for laminating boxes · 10 format plates (1.000 mm x 215 mm x 15 mm) · servo-controlled drive technology based on Siemens technology · infeed incl. inline coupling with box line taper BLT 200 · delivery via conveyor belt Technical specifications: mechanical speed: up to 40 cycles/min box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm cardboard thickness max.: 3,0 mm cardboard thickness min.: 1,5 mm cloth length max.: 815 mm cloth length min.: 120 mm cloth width max.: 605 mm cloth width min.: 120 mm

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg Djdpfx Aszy Satjb Njwc total power requirement 4 kVA weight of the machine ca. 0,5 t dimensions 1,35 x 1,55 x 1,7 m Less used Gear deburing machine - 3-jaw chuck ZG 125 - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function - Working Unit 2, brush function - dust collector - automatic mode

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Djdpfx Abezqt Ume Njwc Milling head speed 15 - 12.000 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality. Dwodpfx Ajzvhlkjb Njc

Year of construction: 2022, condition: used, KOLBUS Box Line Taper BLT 200 year 2022 For the automatic production of raw boxes from cardboard blanks. The BLT 200 is used for uprighting punched and grooved cardboard. Configuration: copilot system with touch screen cardboard feeder Dedpfjz E Npgjx Ab Nowc uprighting channel 4 heat-sealing tape stations 2 sets of knives (4 pcs. each) 2 sets of counter knives (4 pcs. each) servo-controlled drive technology based on Siemens technology Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 3 mm cardboard thickness min.: 1 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi11, Stretch Winder Synthesi Freezer -30 IP65 TECHNICAL DETAILS Turntable / base frame / Ø 1500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) Dwodpfx Aoz Iq I Aob Nsc F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: excellent (used), functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 295 mm, saw blade diameter: 520 mm, saw blade bore: 50 mm, rotational speed (max.): 2,800 rpm, overall weight: 300 kg, cutting depth: 200 mm, extraction nozzle diameter: 100 mm, Further technical data Cutting width: 90° 420 mm | swivelled at 45° 295 mm Cutting depth: tilted at 45/90 degrees 140 mm | 200 mm Dsdpfx Abjxtpuuj Nowc Special equipment 1019 Machine tiltable on both sides from the front via hand crank 1002 Hydraulic feed brake 1049 HM circular saw blade for wood 520x4.0x50 mm / 60 teeth negative

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00639, load capacity: 200 kg, arm reach: 2,600 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-200/2.6 manufactured in 2017.07. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Dedpfx Asz E Utqob Nowc Model: IRB 6700-200/2.6 Model Number: IRB Year of Manufacture Robot: 2017.07 Warranty term (months): 12   Payload (kg): 200 Reach (mm): 2600 Repeatability (mm): ±0.05 Controlled Axes: 6-axis Installation Type: Floor of Invented Weight (kg): 1250   Controller: IRC5 Year of Manufacture Cabinet: 2017.07 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; Djdpoz Irx Nsfx Ab Njwc – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Dsdpfx Absz Ipwcs Newc Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, MAZAK QUICK TURN NEXUS 200-II 500U Max. machining diameter: 350 mm Max. machining length: 511 mm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-208, diameter 210 mm - Tool Eye - Automatic parts catcher - NC tailstock - Reinforced coolant pump - CROMAR chip conveyor - 1 set of tool holders Dwodpfx Aboz Ea Ake Njc

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) Djdoz Iqp Topfx Ab Newc F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: ready for operation (used), Year of construction: 2017, total height: 1,900 mm, overall weight: 1,260 kg, This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine. Additional equipment • Pneumatic saw feed • Clamping device:2 horizontal clamping cylinders 2 vertical clamping cylinders Machine Benefits Qualitative Machine Benefits • The machine ran in two shifts for approximately 3 years and in one shift for the last few years. Technical Machine Benefits • Max blade diameter: 500 mm • Swivel range: manual 45° to 90° • Cutting lengths: 3700 mm Extra Information Drive: 2 x 2.2 kW motors Dwodpfx Aozvu Npob Noc Unit adjustment: Motor-initiated Saw feed: Pneumatic Swivel range: 45-90°, manually adjustable Clamping device: Two horizontal clamping cylinders Control system: Prepared for the attachment of a Rapid control system Fixed center support to support the profiles Saw blades D=500 2x ball screw spindle for unit adjustment Smallest sawing dimension: approx. 310 mm Equipment: DGL-200/R600 ELEKTRONIK with ATV 32 DGL200SE VERT. CLAMP NO. M. AGAINST DGL-200E DGL200TK SHORT T. CONNECTION DGL-200RB Movable roller conveyor, width 215 mm DGL-200E CONNECTION 2.2KW Preparation for FRENIC EXTRACTION CONNECTION Socket connection for extraction up to max. 2.2 kW prepared at the factory DGL200VP - PLANK PACK. FIXED CONTROL PANEL DG1.200 Dimensions Machine Depth 5250 mm