Bundle press buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
2

Bundle press SPLEK

Bischofsheimer Weg 14, 97922 Lauda - Königshofen, DEGermany
6655 km
good (used)
Bundle press SPLEK, in good condition, available immediately Bby2ud87a0 more
6

Bundle Pressing Machine Hunkeler HB 1000

Salzgitter-Bad, GermanyGermany dealership location
6578 km
used
ca. 1977, Bundle Pressing Machine Bkw7pvx more
1

Bundle press Traenklein RBP-AB

Helmstedt, GermanyGermany dealership location
6606 km
1991
used
Bundles of folded sheets and booklets Pressure adjustable Hydraulic system Manual tie up the bundle Machine wheels P228tty more
2

Folded sheet bundle press Karl Traenklein BP

Dabergotz, GermanyGermany dealership location
6679 km
1990
used
Ideal for bundling of folded sheets, brochures, book blocs, cardboards etc B0dgn EElectrical-hydraulical drive, actuation by means of push buttons with 2-hand security control. As soon as the desired pressure is reached, the hydraulic pump will be switched off automatically and pressure will be kept constant. Return movement stops also automatically and can also be stopped in any position. Pressure adjustable up to 2.500 kg. Workable pile length Max. 820 mm Size of pressure Plates 340 x 260... more
2

Jogging and Bundling Press Karl Traenklein RBP

Dabergotz, GermanyGermany dealership location
6679 km
1987
used
Format of the press platens 230x380mm Insert length 280-950 mm Lifting speed 60 mm / sec. Pressure adjustable up to 2400 kg with automatic switch-off 07kmcvdh 380 volts more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Bczqx92kpv PROTECH/RFS PT-4 Hydraulic Circular Radius/Arch Forming [...] plywood/veneer former designed to form arched products up to 20" wide x 96" long x up to 4-1/2" [...]: 11.875" Min. and 48" max. radius. 20" width capacity allows for multiple parts to be formed in a single charge. Fast curing cycles achieved by 20 kW radio frequency generator (3-minute curing cycles are typical). -- Inner profile of the part to be formed is defined by (25) form a... more
1

Press Brakes AGIL 3000mm x 150 ton Press Brake, with Top and Bottom Tooling

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Bczlpaqur8 more
4
Arbor press manufacturer probably Ageo Static pressure performance 1. 500kp, dynamic 3. 500kp to reach maximum pressure 3. 500kp Leverage 1:28 Throat depth 220mm Plunger diameter 50 mm Max mounting height 350 mm Piston stroke 350 mm The base plates 22, 36 mm widths Height 760 mm press body Weight CA. 150 kg with stand 78zj2cyvm more
8
Maximum pressing force: 1000 kN Max stroke: 400 mm Table: 900 x 400 mm Bbp0css7ni Total weight: 4500 kg Total height: 2960 mm more


bundle press
daily

New machines via email!

Stay updated!
3

Hydr. pressbrake GWF EH 80-1000

Bühl, GermanyGermany dealership location
6593 km
1991
used
pressure 80 t chamfer lenght 1000 mm distance between columns 600 mm stroke 250 mm control CYBELEC DNC 34 PS-CM Hgoe7sf table length 1000 mm table width 280 mm column arm 320 mm feed down 110 mm/sec feed up 100 mm/sec working feed 11 mm/sec oil volume 200 l total power requirement kW weight of the machine ca. 5 t Accessories: back gauge, table extensions, various prism bloc segments (2 x 150 mm long, 1 x 500 mm long) more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Cjezdxwo BALE-X 3.5 Compression Bagging SystemSemi-automatic system, consists of basic machine with fill chute, compression ram and separate hydraulic pump unit with 20 HP motor (starter not included), 25 GPM pump with 50-gallon reservoir; ram pressure adjustable via hydraulic bypass [...]: -- Bag size approx. 12" x 16" x 32" long = 3.5 cubic foot (weighs approx. 40 - 50 Lbs depending on moisture content and wood species); small variations in length fr... more
9
KBA Rapida 105-5 SW1 PWHA Age: 2003 Bclqbhqw8b Format: 74x105 cm Counter: 120 mio. 4/1 5/0 Washing devices Ergotronic Colortronic Powder Machine in production Test possible more
2
pressure 6 t dayligth 180 mm spindle diameter 32 mm E289y3d throat 115 mm ram stroke 90 mm table surface area 300x270 mm weight of the machine ca. 70 kg dimensions of the machine ca. 800 x 1350 mm Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
6
Hydraulic corner connection press with retractable abutment and pad arms Width: 140 mm Cutting stroke: Max 15 mm Baj3vegm7w Cutting height: 112 mm Weight: 520 kg more
3

Hydr. pressbrake LOTZE P 100-35

Bühl, GermanyGermany dealership location
6593 km
1966
used
pressure 100 t chamfer lenght 3500 mm distance between columns 2750 mm passage width 2600 mm throat 250 mm stroke 0 - 146 mm dayligth 400 mm table vertical adjustable 70 mm total power requirement kW Lg9m2kir weight of the machine ca. 10,2 t dimensions 3,5 x 1,9 x 2,62 m Acc.: Upper and lower dies, back gauge more
1

BAGGING PRESS (4 STATIONS) VERVILLE VP405

North Carolina, United StatesUnited States dealership location
518 km
2004
used
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Cybt3xp8 VERVILLE VP405 Pet Size Bag Bagging Equipment: -- Model "VP405" - 4-Station bagger -- Finish bag size 8" x 5" x up to 20" -- Holding bin 4 feet long x 3 feet wide x 3 feet deep -- Complete with holding bin and screw feeding conveyor -- Production up to (4) bags per minute more
8
Heidelberg SM 102-8 P Age: 2007 Counter: 144,5 mio. impression Format: 72x102 cm Equipment: Prinect CP 2000 Center Preset Plus Autoplate Chromed cylinders Washing devices Y2d3f2 Prinect Instant Gate Prinect Color Assistant Alcolor Vario Perfect Jacket Plus Technotrans CombiStar Intercom CleanStar Plus PowderStar DuoPlus CleanStar Compact Antistatik Eltex IR-Dryer AirStar more
3

Automatic Punching Press Mubea Mubea VP600

Köln, GermanyGermany dealership location
6416 km
1994
used
pressure: t no. of strokes: Hub/min sheet width:1200 x 750 mm weight of the machine ca.: t :80 mm Gvyz7l2x8 max. material thickness:20 mm min. material thickness:1,5 mm Mubea plate punching machine with coordinate table and CNC control. more
2

Hydr. pressbrake MENGELE H 160-3

Bühl, GermanyGermany dealership location
6593 km
1987
used
pressure 160 t chamfer lenght 4000 mm 7cb0ak3ac distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Acc.: programmable back gauge, upper and lower dies, table extensions more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuvz0pvlz WEIMA TH 1500 M Briquette PressVertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. Specifications: -- Produces 5.9" x 2.3" (150 x 60 mm) rectangular briquettes. -- Hopper opening of 55" x 55" (1,400 x 1,400 mm); hopper volume of 2.46 cu/yd (1.88 cbm). -- Equipped with: 40 HP Hydraulic motor; 2.6 HP auger motor; 3.0 HP agitator ... more
3

Suction machines & filters HSM Absaugung mit Ballenpresse VK 12/600

Murr, GermanyGermany dealership location
6656 km
ready for operation (used)
Technical data: HSM extraction with baler UK 12/600 Pressure: 16 tons Hj3lkmoxk more
5

Punching Press Peddinghaus Hydraulic 1001

Köln, GermanyGermany dealership location
6416 km
2004
used
pressure:100 t Ojij90o punching cross-cut in cmm:2430 mm² stroke:10 - 50 mm throat:510 mm Working height:1100 mm total power requirement:7,5 kW weight of the machine ca.:2,4 t dimensions of the machine ca.:1,78 x 1,02 x 2,06 m Hydraulic Peddinghaus punching machine 1001, with conventional drive, height-adjustable wiper with removeable panel. The stroke length and stroke position is adjustable between 10 - 50 mm at the Hydraulic 1001. The punching machine is equiped with a hydraulic low pressur... more
1
pressure:40 t distance between columns:600 mm stroke: mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Total height:2540 mm length in width:1440 mm power capacity:5,5 kW centering bore - table plate:100 mm depth:1100 mm column depth:950 mm Mskwyo oil box capacity:250 l total power requirement:ant kW weight of the machine ca.: t dimensions of the machine ca.: m 100 % before loading warranty: none used double colum... more
6
tube diameter max. 38 mm wall strength 2 mm bar material dia. min. 10 mm bending radius min. 35 mm bending radius max. 150 mm pull up length of tube 4500 mm bending angle max. 180 ° accuracy of bending angle ± 0,2 ° total power requirement 7,5 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 2,00 x 7,40 x 1,20 m Ba7i99o8 with 8-pos. bend angle preselection crawler gear control positioning device by hand tube twist device more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbvstasdim ACCURPRESS 717512 Hydraulic Press Brake -- Capacity 175 ton x 144". -- Distance between housing 124". -- Stroke 8". -- Throat 10". -- Open height 14". -- Closed height 6". -- Speeds 90/17/180 IPM. -- Back gauge range 24". -- Motor 20 HP. -- Dimensions 150" x 52" x 92" high. -- Weight 24,000 [...] with: -- Accurpress AP2 X,Y CNC Control, Manual Z. -- ETS pedestal. -- Die rail. more
5

High speed press KAISER V 160 WR

Gammertingen, GermanyGermany dealership location
6689 km
1979
used
Pressure: 160 ton Ram stroke adjustable: 20 - 180 mm Ram adjustment: 80 mm Shut height (stroke down, adjustment up): 450 mm Free lateral opening F-B: 520 mm Table surface area : 1.420 x 900 mm Ram surface area: 1.110 x 720 mm Hole in table: 1.100 x 200 mm Number of strokes: 25 - 100 [...] Gf9vel0y8 Required power: 28 kW Height over floor approx.: 3.800 mm Weight of machine approx.: 28 ton more
2

Punching Press DURMA P 55

Witten, GermanyGermany dealership location
6419 km
2008
used
pressure:055 t punching cross-cut in cmm: - stroke:60 mm work height max.:1100 mm throat:510 mm F0hebzyrq engine output:5,5 kW more
10
SX80/350 Belt Driven Compressor 15 kW 20 HP 3 Phase (Used) MPN : SX80/350 Serial Number : 26126 Year of Manufacture : 2002 Supply : 380 / 415 /440 V Wxecg Phase : 3 phase star delta Rating : 15 kW Horse Power : 20 hp Displacement : 80 cfm (63 cfm fad at 100psi) Tank Capacity : 300 litres Tested : No, for spare parts or refurbishment project Damage : Please see images - a few bashes here and there, cage bracket supports have broken and need welding. Please Note : Compressor i... more
2

Hydr. pressbrake LVD PPEB 175/30 MNC

Bühl, GermanyGermany dealership location
6593 km
1987
used
pressure 175 t chamfer lenght 3050 mm distance between columns 2550 mm control MNC 85000 stroke of upper beam 250 mm distance beam - table max. 500 mm throat 300 mm table width 180 mm feed down 100 mm/sec feed up 79,8 mm/sec working feed 12,1 mm/sec tank capacity 260 l engine output 22 kW weight of the machine ca. 14,0 t range L-W-H 5,30 x 2,02 x 3,55 m E272wst acc.: upper and lower dies, rear stop more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. H3370cvt ACCURPRESS 7175-12 CNC Press Brake -- Tonnage 175 ton -- Overall length of bed and ram 144" -- Distance between housings 124" -- Ram stroke 0 to 8" -- Throat 10" -- Open height 14" -- Closed height 6" -- Bed height 34" -- Approach speed 90" /minute -- Pressing speed 17" / minute -- Return speed 180" minute -- Motor 20 HP / 1760 RPM -- Approximate dimensions 178" x 66" x 94" high -- Approximate weight 24,000 [...] with: -- Ac... more
4

Hydraulic C-Frame press OMERA OPI 100 SC

Gammertingen, GermanyGermany dealership location
6689 km
1991
used
Pressure: 100 ton Throat: 420 mm Stroke: 600 mm Daylight: 900 mm Nbpuz Table surface area : 980 x 750 mm Ram surface area: 980 x 750 Table height over floor: 985 mm Approach speed: 480 mm / sec Working speed: 21 - 60 mm / sec Return speed: 470 mm / sec Levelling roll-Ø : 50 ton Additional adjustment range each rail: 250 Max. pressure: 600 x 650 Required power: 22 kW Dimensions L x W x H: 980 x 2.050 x 3.800 mm Weight of machine approx.: 10,5 ton more
3

Press Brake Amada HFT 50-20L

Gammertingen, GermanyGermany dealership location
6690 km
2009
used
Tonnage approx.: 50 kN Bending length approx.: 2090 mm Stroke blankholder : CD 2000 Term hydraulic: 2577 h Nbpzf Length: 2950 mm Width: 1820 mm Height: 2450 mm Weight of machine approx.: 5250 kg Effective open height: 960 mm Stroke length with use of progressive dies: 200 mm throat: 420 mm Working speed: max 10 mm / sec more
6
Manufacturer Strautmann Typ Bale Tainer Bcv7jm0zii Year of construction 2011 Hours of operation 3.057 hours Quantity of pressed bales 138 pieces Press power main press 60 tons Feed channel 2,815 x 1,085 mm (l x w) Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 9,2 kW Connected load 15 kW Tying system 4 fold vertical, fully automated Bale weight up to 400 kg, depends on material SPS controller (manuf., type) Siemens S7 300 Operating panel (manuf., type) Siemens Simatic Touch Pa... more
4

CNC press brake Beyeler RT80x2050

Erwitte , GermanyGermany dealership location
6470 km
1990
good (used)
Used CNC press brake Fabr. BEYELER, type RT80x2050 Mwzpx Built in 1990 with Cybelec 90/9000 specifications Maximum bending length 2050 mm continuity betw. d. stands 1500 mm Throat depth 250 mm stroke 380 mm (high) Height 530 mm (increased) 2.50 x 1.80 x 3.15 m machine weight machine dimensions Lxwxh approx. 7400 kg of equipment and accessories 2-hand control foot pedal various press brake tooling for hydraulic pump overhauled in March 2018 more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Nccnn LOGERMAN 103-21-BDS SCRAP BRIQUETTER -- High density hydraulic briquetter -- 20 HP motor -- Bale size; 3" x 10" x variable -- Feed opening 22" x 24" -- Chamber size 24" wide x 10" deep x 34" long -- Bale weight 30 Lbs (mild steel) -- Loaded on your truck more
3

Eccentric C-Frame press EDELHOFF DEPRRW 200

Gammertingen, GermanyGermany dealership location
6689 km
1983
used
Capacity: 200 ton Throat: 300 mm Ram stroke: 20 - 140 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 360 mm Table surface area : 1.500 x 600 mm Ram surface area: 1.300 x 560 mm Number of strokes: 30 - 120 [...] Vertikale Verstellbarkeit der oberen Platte: 790 mm Bbpdlwpdvb Required power: 18,5 kW Dimensions L x W x H: 2.250 x 2.250 x 3.500 mm Weight of machine approx.: 20 ton more
6
chamfer lenght 3050 - 4020 mm Fem0ixm0m 4 pieces of unused upper tools: tool No 1 Length: 3700 mm, dimensions see sketch, price = 940,- tool No 2 length: 4020 mm, dimensions see sketch, price = 880,- tool No 3 length: 3055 mm, dimensions see sketch, price = 750,- tool No 4 length: 3050 mm, dimensions see sketch, price = 750,- Prices excl. VAT Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
6
pressure 100 t distance between columns 625 / 300 mm stroke 8 - 100 mm table-size 950 x 550 mm ram surface 450 x 265 mm ram adjustment 65 mm no. of strokes 25 - 90 Hub/min dayligth 450 mm total power requirement kW weight of the machine ca. 6,5 t dimensions of the machine ca. 1,1 x 1,75 x 2,48 m Bbidakjz3h Press overhauled in 2015 and equipped with: -- Electrical overload protection -- Designed as a punching machine and has the operating mode -Setting up for two handed - Roll feed WL 20/8... more
9
No° 04077 Electrohydraulic veneer press OTT JU 65 used, functional plate dimensions ca. 2250 x 1200 mm Aluminium heating plates, electrical heated Button control with automatic pressure-control and correction safety release cord 4 hydraulic cylinders, each 80 mm diameter Gzsodh9ac Total pressure 65 tons specific pressure ca. 2,5 kg / cm² Operating pressure ca. 350 atü transport dimensions 2550 x1300x2100 mm LWH Weight 2600 kg Used machine without guarantee. pri... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuv9zhf3n RUF RB 15/1500/150x60 Metal Briquetter (Running Aluminum)Exceptionally strong and low maintenance. Simple, compact, and can be installed almost anywhere. Designed to run (24) hours a day. If the material to be briquetted is fed automatically into the hopper, then no operating personnel are required. Recover expensive coolant fluids for reuse; lower combustion and higher melting yield than loose chips Equipped with: -- Hopper with agitator and ch... more
6
Pressure total: 315 ton Stroke: 350 mm Daylight: 540 mm Table surface area : 2.000 x 1.200 mm Ram surface area: 2.000 x 1.200 mm Required power: 65 kW Nbpvd Dimensions L x W x H: 4.400 x 2.950 x 4.800 mm Weight of machine approx.: 35 ton more


bundle press
daily

New machines via email!

Stay updated!

to

to

Edit search
BUNDLE PRESS
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close