Used Bundle for sale (394)

Condition: good (used), Layer palletizer for stable (strapped) bundles. Bundle size : min 140-200mm, max 300-430mm From one infeed line onto one pallet. Infeed with blocking unit VB-95 and optionally walkway conveyor and flow turn to the left. Row building with bundle turning, transfer of rows and building of a complete layer. Palletizing of the layer onto pallet. Pallet conveying for EURO-pallets (800x1200mm) with empty pallet dispenser PT-80, palletizing position and pick-up for full pallets. Speed of up to 1500 bundles/h (stable bundles required!). Fpedjg Hfbpjpfx Afnjc Weight (palletizer + pallet conveying): ~ 3000 kg Power: 380-420 V, 3~, N, PE, 50 Hz Air: 0,35 Nm3/Min 6 bar

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26027.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26027.40 Serial number empty pallet dispenser (pallet terminal): 132 Includes pallet conveying, reference-no: 26027.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Fpsdshrmk Rspfx Afnsc Machine available: upon request

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side / längs Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26150X.30 Serial Number blocking unit: 75 Infeed with flying cross (turning device) for bundles Serial Number turning device: DK 5 Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) Fpjdjhrmlcspfx Afnjc With slip sheet dispenser Empty pallet dispenser (model): PT 80 Reference-# empty pallet dispenser (pallet terminal): 26150X.40 Serial number empty pallet dispenser (pallet terminal): 53 Includes pallet conveying, reference-no: 26150X.50 Conveying for a pallet width of 800 mm Pallet conveying mounted on floor Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is

Year of construction: 1992, condition: used, Size max 320 x 250 mm min 160 x 120 mm Pile height 50 mm Infeed height max 850 mm Fpedpsc Rmtzofx Afnjc min 350 mm Speed max 50-100 m/min

Condition: good (used), Layer palletizer for stable (strapped) bundles. Bundle size : min 140-200mm, max 300-430mm From one infeed line onto one pallet. Infeed with blocking unit VB-95 and optionally 2 x walkway conveyors and flow turn to the right. Row building with bundle turning, transfer of rows and building of a complete layer. Palletizing of the layer onto pallet. Pallet conveying for EURO-pallets (800x1200mm) with empty pallet dispenser PT-80, palletizing position and pick-up for full pallets. Fpjdpjg Hfbtsfx Afnsc Speed of up to 1500 bundles/h (stable bundles required!). Weight (palletizer + pallet conveying): ~ 3000 kg Power: 380-420 V, 3~, N, PE, 50 Hz Air: 0,35 Nm3/Min 6 bar

Condition: used, Year of construction: 2001, ATS-CE 340/30 bundling machine Fpsdpfsvthwfex Afnsc Banding machine with temperature welding Band width 30mm Paper and film can be used as banding material Cooling time setting Extras: Jumbo dispenser 2x available. Price plus VAT EXW. All information without guarantee. Subject to prior sale. Dealer business. The sale is made without any warranty.

Condition: used, Mini bundeling mechanization IDL000770 - manufacturer Jonab Fsdet Ebndjpfx Afnspc

Year of construction: 2010, condition: good (used), CAM Bundler / Stretch Bander with Heat Shrink Tubs + Tubs of Trays Automatic Side loader Infeed All stainless steel 350mm wide x 1550mm long stainless wire mesh belt Side infeed belt 230mm W x 1000mm L 110mm Pusher Stroke Current film 250mm, Max Film 500mm Complete with spare parts Pack Details Size Pot Size Collation Bundle Size D E F 125g 60 ø x 68mm 4 x 3 x 1 180 68 240 125g 60 ø x 68mm 3 x 2 x 1 120 68 180 250g 75 ø x 68mm 4 x 3 x 1 225 75 300 250g 75 ø x 68mm 3 x 2 x 1 150 75 225 Fpedpfxonu Uh Ns Afnoc 125g Tray (2 x 6) N/A 120 68 368 125g Tray (4 x 3) N/A 183 68 246 250g Tray (4 x 3) N/A 234 75 310 250g Tray (2 x 3) N/A 144 75 230

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,416 h, laser power: 3,200 W, sheet thickness steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 152 mm, working length: 6,500 mm, TRUMPF Tube Laser Cutting System with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Maximum working length: 6,500 mm Material thickness (steel): 10 mm Material thickness (stainless steel): 5 mm Material thickness (aluminum): 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle magazine - Robust machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatically retractable pipe rests - Through-feed chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished workpieces up to 3 m in length - Tube support for finished parts with extendable guide rollers - Scrap conveyor with collection bin - Enclosed beam guide - NitroLine - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic power on/off - Ergonomic control panel with touch color screen - Work area illumination - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head, 155 mm focal length - ControlLine - Simple operation - Online support - Diagnostic functions - Integrated technology data - Remote service via internet - RJ45 network interface and USB port - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and cooling water, among others - Compact dust extraction system - Protective enclosure with polycarbonate (Makrolon) panels - Jaw sets with clamping range 20–85 mm and 85–152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 85 mm) - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with inner seam detection - Adaptive clamping technology – feed station, small circumscribed circle - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – through-feed chuck, small circumscribed circle - Adaptive clamping technology – through-feed chuck, large circumscribed circle Note: The machine will be dismantled on 02/03/2026 and can be inspected under power until then. Fodpfx Afsygu Tkjnjpc

Condition: used, Year of construction: 2016, functionality: fully functional, USED COMPLETE BOTTLING LINE KHS 54,000 BPH Product: Still Water Speed: 54,000 BPH Fpsdpfx Afjx Urmxenjc Year: 2016 KHS INNOPET BLOWFILL MONOBLOCK Preform Hopper Preform Elevator Preform Orientator PET Blow Molding Machine: Chiller Labeling Machine 2 stations with roll-fed PE modules Direction of rotation: counterclockwise Electronic cam plates Filler Capper Type of workable cap: pre-threaded plastic Distribution system: pick & place Caps Elevator Caps Orientator Bottle Inspector KHS Shrink Wrapper Model: Innopack Kisters SP Version: film launch 6 Lanes Bundle 6x4 Only film KHS Palletizer Dual Robotic Arm Clamping, lifting Pallet storage Interlayer system KHS Pallet Wrapper Rotating arm Pre-stretch Code: NP 696

Condition: used, Year of construction: 2009, functionality: fully functional, COMPLETE PET BOTTLING LINE KHS Product: Still Water Speed: 32,000 BPH Year: 2009 Cap: Corvaglia 29/26 Preform Hopper Preform Elevator Preform Orientator PET Blower KHS Model: Blowmax 16S Series IV Compressor Chiller Filling Monoblock: Filler 50 mechanical valves Type of filling: gravity Capper including elevator and orientator Type of cap: pre-threaded plastic Cap size: Corvaglia 29/26 Distribution system: pick & place Labeller PE 1 roll-fed station Mechanical cam plates Bottle inspector Shrink Wrapper Version: film launch Bundle 6x4 Palletizer Alvey 881 Fedpfx Asx Tpygefnjpc Type: push system Pallet Storage Pallet Wrapper Lantech Model: S1500 Type of wrapping: Rotating arm Pre-stretch Code: NP 695

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor: one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Fpjdpfxjygywuo Afnsc Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Weight: 8,5 ton (only machine)

Condition: excellent (used), functionality: fully functional, Injection Molding Machines Package – BOY – 5 Units For sale: a package of five BOY injection molding machines from one production site, covering a clamping force range from 22 to 90 tons. Manufacturing years range from 1998 to 2007, making this an attractive starter set or expansion bundle for a plastics processing operation. Sale preferred as a complete package. _____ Machines Included: • BOY 50M – Year 1998 – 50 tons • BOY 80M – Year 1998 – 80 tons • BOY 90M – Year 2003 – 90 tons • BOY 35A – Year 2007 – 35 tons Fodpfxeyiphzs Afnjpc • BOY 22D – Year 2000 – 22 tons _____ General Range: • Clamping force: 22–90 tons • Injection volume: up to 80 g (PS) • Compact machines suitable for small to medium molds • European manufacturer – BOY Sale as one lot preferred. Machines available for inspection by appointment. Loading assistance possible; transport at buyer’s cost. _____ Technical Overview by Machine: BOY 50M – 1998 • Clamping force: 50 tons • Screw diameter: 28 mm • Injection volume (PS): 66 g • Injection pressure: 1320 bar • Tie bar spacing: 340 mm • Mold opening stroke: 550 mm • Dimensions (L × W × H): 3300 × 1000 × 2300 mm BOY 80M – 1998 • Clamping force: 80 tons • Screw diameter: 28 mm • Injection volume (PS): 70 g • Injection pressure: 1320 bar • Tie bar spacing: 410 mm • Mold opening stroke: 620 mm • Dimensions: 3750 × 1150 × 2400 mm BOY 90M – 2003 • Clamping force: 90 tons • Screw diameter: 28 mm • Injection volume (PS): 80 g • Injection pressure: 1320 bar • Tie bar spacing: 430 mm • Mold opening stroke: 650 mm • Dimensions: 3850 × 1000 × 2500 mm BOY 35A – 2007 • Clamping force: 35 tons • Screw diameter: 24 mm • Injection volume (PS): 40 g • Injection pressure: 1735 bar • Tie bar spacing: 280 mm • Mold opening stroke: 480 mm • Dimensions: 2800 × 800 × 1570 mm BOY 22D – 2000 • Clamping force: 22 tons • Screw diameter: 22 mm • Injection volume (PS): 27 g • Injection pressure: 820 bar • Tie bar spacing: 250 mm • Mold opening stroke: 400 mm • Dimensions: 2450 × 850 × 1450 mm

Condition: good (used), Year of construction: 1994, For sale is a fully CNC-controlled planing mill. The planing mill can be inspected while in operation. A demonstration and training is possible before dismantling if purchased. The plant was exclusively used for the production of paneling and parquet (panels). Reason for sale: Construction of a new, complete planing mill. Equipment: 1. Stacking station 2. Vacuum lifter - Age: approx. 1.5 years 3. Cross conveyor 4. Canali resaw bandsaw - 2 bandsaws 5. Longitudinal/cross conveyor including roller conveyors 6. Costa planing machine with 10 spindles - CNC-controlled Spindle configuration: 1 spindle horizontal 2 vertical right lift spindles 3 vertical left lift spindles Fpsdpfx Ast Ngwrsfnsc 4 spindle horizontal 5 vertical right lift spindle 6 vertical left lift spindle 7 top horizontal spindle 8 bottom horizontal spindle 9 bottom horizontal spindle 10 bottom horizontal jointing spindle 7. Roller conveyor with discharge 8. Roller conveyor 9. Cross and longitudinal conveyor Inspection and Contact: The planing mill can be inspected during running operation. Arrange a viewing appointment to see the system before dismantling. Take the opportunity to acquire a fully functional planing mill!

Year of construction: 2019, condition: ready for operation (used), overall weight: 1,900 kg, total width: 3,100 mm, total height: 2,200 mm, cutting speed: 150,000 mm/min, product length (max.): 1,200 mm, This Metal Band Saw was manufactured in 2019. The MEBAeco 510 features a cutting capacity of Ø 510 mm and 700 × 510 mm for rectangular materials. It operates with a powerful 7.5 kW motor and a saw blade speed of 15–150 m/min. Consider the opportunity to buy this MEBAeco 510 Metal Band Saw for your cutting needs. Contact us for further details. • Cutting angle: 90° • Cutting capacity (round / rectangular): Ø 510 mm / 700 × 510 mm • Motor power: 7.5 kW • Saw blade size: 6100 × 41 × 1.3 mm Fpedpfx Afsyhqf Sjnjc • Saw blade speed: 15–150 m/min • Remaining piece length (manual), without bundle clamp: 25 mm • Remaining piece length (manual), with bundle clamp: 160 mm • Maximum material size with bundle clamp: Ø 510 mm / 700 × 500 mm • Minimum cutting length: 5 mm • Working height: 750 mm

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details. • Dual-station decoiler • Function: Passively unwinds the coil • Construction: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, simple operation • Hydraulic shear and butt-welding machine • Function: Cuts front/rear strip ends, centers, and re-welds • Construction: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting method: Hydraulic shear • Pressing method: Double-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during strip changeover • Construction: Frame type with movable and fixed frames (incl. feeding device) • Feeding speed: max 120 m/min • Storage speed: max 200 m/min • Stored strip length: 200–400 m • Pinching roller motor: AC 11 kW • Forming and calibration machine • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reducer: gear-hardened; gearbox: spiral bevel gear • Entry/formation: Passive 5-roll straightener; vertical rolls for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/calibration: 6 horizontal + 5 vertical roll stands; 1 round calibration stand • Round calibration stand: 1 smoothing device; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, quenched/tempered/hardened • Horizontal roller shaft: Ø60 mm, bearing position 55, material 40Cr; surface hardening HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, quenched/tempered/hardened • Bearing slider: Forged steel 45# • Stand style: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stands material: Welded, aging annealed • Pinching roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm Fjdoyhfvljpfx Afnopc • Deburring knife: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cuts pipes to preset length at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feeding motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feeding mode: Servo multi-stage speed • Speed following: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducer: Model KK-80 • Sawing stroke (rack length): 3 mNote • The technical data and descriptions are transcribed from the original order confirmation and are for informational purposes only; they are not binding. Additional equipment • Conveyor track, table, and packing machine • Function: Automatic pipe transfer from mill to table; packages into hexagonal bundles • Roller track length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW

Condition: used, Working width 230 mm Fpedpfx Ajxmh U Hofnsc Working height 160 mm control Memory Plus

Condition: good (used), Code: 0206 Brand: CMS SCARPARI - ITALY Model: MI 120/EL Cut-off machine for wood parcel, trimming and sectioning timber bundles, used by packaging companies, pallets, crates, sawmills, timber merchants, framers, carpenters, window frames and various materials Fedpfx Afoxdcwdenspc Cutting width mm 1200 Cutting height mm 1200 Motorised right loading roller conveyor length mm 4700 - width mm 1400 - height mm 1570 - controlled by inverter Central cutting unit with motor Hp 12,5 Lifting and lowering with self-braking gear motor Hp 1,5 Chain lubrication with hydraulic power unit Motorised unloading roller conveyor on the left - length mm 5300 - width mm 1400 - height mm 1570 Belt for transport and evacuation of trimming scraps N° 2 used spare chains Chain sharpener Compressed air 6 bar Suction mouth diameter mm 140 Overall dimensions of mounted machine mm 10000 x 2100 x 3300 h

Condition: used, Year of construction: 2009, operating hours: 20,000 h, machine/vehicle number: FA47, Technical Specifications & Performance Data The SMI SK 450F is a second hand shrink wrapper engineered for high-speed industrial packaging in beverage production and related sectors. This model is well suited to operate downstream of rinsing, filling, capping, and labeling blocks within a used bottling line, delivering stable, brandable bundles for transport and retail. Manufacturer / Model: SMI SK 450F Year: 2009 Category: Shrink Wrapper (film application with shrink tunnel) Production speed: up to 28,000 bottles/hour (format dependent) Bundling rate: up to 45 bundles/minute (collation dependent) Operating type: Automatic, continuous-duty shrink wrapping Infeed configuration: Straight inline entry for high-speed lines Film handling: Works with printed film (print-mark registration) and neutral film Packaging styles: Film-only and tray+film configurations (subject to setup) Typical collations: 4×3 0.33 L, 3×2 0.33 L, 4×3 0.50 L, 3×2 1.5 L, 2×2 1.5 L, 3×2 1.5 L, 3×2 2.0 L, 2×2 2.0 L Container materials: PET and glass bottles, aluminum cans Product types: Water, juice, beer, wine, carbonated soft drinks, energy drinks, and more Technical measurements: Dimensions/weights available in manuals Advanced Automation & Control Systems Designed for demanding beverage production, the SK 450F provides robust automation to maintain output and pack quality at speed. Operator-friendly HMI for recipe selection, format parameters, and diagnostics Automatic film unwinding with tension control for stable wrapping of PET, glass, and cans Print-mark sensor for precise registration when running printed film Shrink tunnel with zoned temperature control for consistent, wrinkle-free bundles Integrated safety interlocks, emergency stops, and safety guards included Electrical specifications and wiring diagrams available in the manuals Production Line Integration Capabilities This shrink wrapper integrates seamlessly into a used bottling line alongside upstream rinsing, filling, capping, and labeling systems, and downstream conveying, case handling, and palletizing. Fpodpsyhbzwofx Afnoc Inline interface with conveyors, accumulation tables, and inspection systems Quick format change with recipe-based adjustments for varied collations Compatible with multi-product schedules across water, juice, beer, wine, and mixed SKUs Synchronization options for line speed following and start/stop handshakes Machine Condition & Maintenance History Condition: IN STORAGE, second hand unit from 2009 Safety features included as part of the delivered scope Manuals available for operation, maintenance, and electrical references General cosmetic wear consistent with a used industrial packaging machine; inspection and test running can be arranged as part of line integration planning

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: FA58, Technical Specifications & Performance Data Fpodpfsyhbh Dox Afnec This automatic shrink wrapper is engineered for reliable bundling and shrink packaging in high-demand beverage production and industrial packaging environments. Manufactured by TECMI, the model BP802ARV 380R delivers consistent throughput and robust construction suitable for second hand and used bottling line integrations. Manufacturer: TECMI Model: BP802ARV 380R Year: 2013 Production speed: 8,000–12,000 bpm Formats: PET 0.38L bottles, 24-pack bundles Container types: PET bottles Dimensions (X × Y × Z): 4140 × 3230 × 2095–2255 mm Weight: 1400 kg Electrical data: 440 V, 60 Hz, 27.25 kW, 45 A, 3PH+PE Advanced Automation & Control Systems Designed for automatic operation, the TECMI BP802ARV 380R streamlines pack formation and shrink-wrapping with minimal operator intervention. Its architecture supports precise film handling, consistent sealing, and stable oven performance for uniform pack quality across long shifts. The electrical system is configured for industrial-duty 440 V, 60 Hz power, with optimized energy usage at 27.25 kW. Safety-rated components and clear operator stations help ensure dependable performance with straightforward controls suitable for modern production standards. Production Line Integration Capabilities This shrink wrapper integrates smoothly as a standalone machine or in-line with upstream and downstream bottling equipment, including conveyors, fillers, labelers, and case handling units. It is well-suited to beverage production lines that handle PET bottles and require regular format changes for multi-pack configurations. The machine’s layout accommodates standard conveying interfaces for efficient infeed and discharge, enabling flexible installation within existing packaging machinery cells on used bottling line upgrades. Machine Condition & Maintenance History The machine is currently in storage, presenting an excellent opportunity for facilities seeking a second hand shrink wrapper ready to be recommissioned. Its year of manufacture (2013) and industrial-grade build provide a solid foundation for reliable operation after standard installation checks and start-up procedures. Operational Performance & Versatility Optimized for PET bottle bundling in 24-pack configurations, the BP802ARV 380R provides consistent throughput across the 8,000–12,000 bpm range, supporting high-volume beverage production. The shrink tunnel delivers stable temperature control for tight, visually consistent packs. Its design supports common beverage applications where durable film seals and stable packs are critical for downstream palletizing and logistics. Installation Requirements & Site Preparation Plan for a footprint consistent with the layout dimensions (X: 4140 mm, Y: 3230 mm, Z: 2095–2255 mm). Provide a 3-phase 440 V, 60 Hz electrical supply with appropriate protection for a connected load of approximately 27.25 kW and 45 A nominal current. Ensure adequate ventilation around the shrink tunnel and safe access for operators and maintenance personnel. Positioning should allow for infee...

Condition: used, Column-guided bandsaw semi-automatic METORA - KALTENBACH Type HMB 380 DS Fjdsdzqtgepfx Afnepc Only for 90° cuts (Made in Austria) Machine No. 4580028 Year of manufacture: approx. 1993 Cutting capacity round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw band speed: 25–108 m/min, continuously variable Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw in double-column design - Hydraulic saw bow descent with stepless adjustable cutting pressure - Stepless adjustable descent speed - Hydraulic vice clamping with hydraulic bundle clamping from above - Hydraulic unit integrated in machine base - Material feed roller on infeed side with geared motor (not mounted on machine frame) - Coolant system with coolant pump for water emulsion - Minimum-quantity lubrication system for the saw blade - Electric heating cartridge for cooling water and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display, and hydraulic stop carriage clamping Stop length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable without roller conveyor Machine footprint (L x W x H): 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of stop system: approx. 800 kg In good condition

Condition: used, Year of construction: 2015, POPP Banding Machine The POPP Banding Machine is a powerful and precise device for bundling and packaging printed materials, paper goods, and other products using paper or film bands. It is ideally suited for use in printing houses, the graphic industry, as well as in logistics and packaging technology. The machine impresses with its robust construction, high flexibility, and easy operation. Special Features - Robust, industrial design for continuous operation - Flexible processing of various product sizes - Stepless speed control directly on the control panel - Product access optionally straight or transverse to the band running direction - Lockable foot stoppers for secure positioning - High performance: up to 600 stacks per hour - Easy integration into existing production lines - Suitable for various banding materials (paper, film) - Compact design for space-saving use Technical Specifications Fjdpfxsw Evcrj Afnspc - Working width: 305 mm - Console width: 760 mm - Working height: 740 mm (lockable) - Product format (min.): 150 x 100 x 30 mm (L x W x stack height) - Product format (max.): 400 x 290 x 50 mm (L x W x stack height) - Maximum stacks/hour: 600 - Speed: 10 – 30 m/min - Speed control: 0 – 100% on the control panel - Machine dimensions (net): 1500 x 800 x 1700 mm (L x W x H) - Machine weight: 500 kg - Power supply: 400 V, 16 A, 3 phases, 50 Hz All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Fsdpfovxtavjx Afnspc

Condition: excellent (used), Year of construction: 2022, operating hours: 2,400 h, 1x Arburg 320C 500-170 Golden Edition with integral picker Year: 05/2022 Operating hours: 2,400 Fpjdpfx Afsyi Ayqsnjc A total of 3 machines available: 1x Year: 2020 2x Year: 2022 Features: CG series 320 C 500 - 170 Thermoplastic cylinder complete, 35 mm, wear-resistant Standard screw coupling, double flat coupling geometry Selogica direct control system Hydraulic system with 2 variable displacement pumps Anniversary model GOLDEN EDITION Thermoplastic processing Open nozzle 35 mm Nozzle tip radius 35 Heating band for open nozzle Clamp plate set 320 central, Ø 125 mm Pneumatic maintenance unit with 1 pressure regulator (1x1000l/min) Electric connection for air blow-out device 1 on machine frame Air blow-out device 2 with 3/2 valve on machine frame Sorting unit, longitudinal installation including connection Mold clamping with safety guard open Programmable conveyor belt integrated in machine frame, longitudinal Preparation for INTEGRALPICKER V Robot system interface (according to EUROMAP 67), 50 pin Socket combination: 1 CEE, 1 Schuko via FI 30mA Type B safety switch Basic connectivity for further "Connected Services" Printer interface, serial USB CompactFlash interface for data storage Operation authorization via chip card according to EUROMAP 65 Parallel connection for nozzle tip heating band or adapter User-configurable page for "startup parameters" Coloring device interface Shut-off valve for cooling water inlet Cooling water filter 100 µm included 3 free, manually adjustable cooling circuits GOLDEN Automation Package with IP-V Regulated machine cooling circuits aXw Control Setup Bundle aXw Control Start-Stop Bundle ARBURG Remote Service (ARS) Productivity package Initial commissioning by ARBURG service CD operating manual and spare parts list Sign plates language: German (DE) Without granulate hopper 50 L Without heating band for nozzle tip Elastic machine mounting on rubber-metal elements Ejector plate connection with safety device Ejector quick coupling Water-cooled control cabinet Hydraulic ejector Guard open at top Standard equipment packages Machine equipped with INTEGRALPICKER New ARBURG color scheme 5625-S356/XX-B-Z150 Centering on moving mold fixing plate 150 mm instead of 125 mm

Condition: excellent (used), Year of construction: 2022, operating hours: 2,100 h, 1x Arburg 320C 500-170 Golden Edition with Integral Picker Year of manufacture: 05/2022 Operating hours: 2,100 A total of 3 machines are available! 1x Year: 2020 2x Year: 2022 Equipment: - CG series - 320 C 500 - 170 - Complete 35 mm wear-resistant thermoplastic cylinder - Standard screw coupling, square coupling geometry - Selogica direct control system - Hydraulic system with 2 variable displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 35 mm - Nozzle tip radius 35 - Heating band for open nozzle - Central clamping platen set 320, Ø 125 mm - Pneumatic maintenance unit with 1 pressure regulator (1x1000 l/min) - Electric connection for blow-off device 1 on machine base - Blow-off device 2 with 3/2 valve on machine base - Selector unit, longitudinal mounting including connection - Mold clamping while safety guard is open - Programmable conveyor belt in the machine base, longitudinal - Preparation for INTEGRALPICKER V - Robot interface (according to EUROMAP 67), 50-pin - Socket combination 1CEE, 1 Schuko protected by 30mA residual-current circuit breaker type B - Basic Connectivity for additional "Connected Services" - Serial printer interface USB - CompactFlash interface for data record storage - Operator authorization with chip card according to EUROMAP 65 - Parallel connection for heating band nozzle tip or adapter - Freely configurable page for "start-up parameters" Fjdpfx Aoyi Axmsfnepc - Coloring device interface - Shut-off valve for cooling water inlet - Cooling water filter 100 µm supplied separately - 3 manually adjustable free cooling circuits - GOLDEN Automation Package with IP-V - Regulated machine cooling circuits - aXw Control Setup Bundle - aXw Control Start-Stop Bundle - ARBURG Remote Service (ARS) - Productivity package - Initial setup by ARBURG service - CD with operating instructions and spare parts list - Signage language German (DE) - Without granulate container 50 L - Without heating band for nozzle tip - Elastic machine mounting on vibration-damping mounts - Ejector plate connection safety - Quick-release coupling for ejector - Water-cooled control cabinet - Hydraulic ejector - Open-top safety device - Standard equipment packages - Machine equipped with INTEGRALPICKER - New ARBURG color scheme 5625-S356/XX-B-Z150 Centered in moving mold clamping plate 150 mm instead of 125 mm