Bundle machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
machine glue application machine for veneer manufacturer Kuper type KLM part Id-no. 0600380 year of construction 2004 ... more
6

Bundle Pressing Machine Hunkeler HB 1000

Salzgitter-Bad, GermanyGermany dealership location
6578 km
used
ca. 1977, Bundle Pressing Machine Bkw7pvx more
3
Pipe Bundle System for lye heating, lid diameter: 665mm, pipe diameter: 28mm, steam pressure: 3bar, including covering lid, system is unused. 8vcvrcntb more
4
Film width: approx. 450mm, capacity: approx. 24cycles/min max., control: Siemens. Ftzwwod more
1

Coiled Bundle Winding Machine Graewe AEW 2700

Berlin, GermanyGermany dealership location
6738 km
2001
used
Pipe diameter: 20-75mm, coiled bundle outer diameter: 2700mm, coiled bundle width: 163-480mm, flap height: 440mm, coiled bundle inner diameter: 600-1600mm, automatic strapper Cyklop, pipe cutt-off device, coiled bundle pushing unit, coiled bundle picker. 7d0zatkdh more
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. Bbuzhqalxj UNIQUE 3450 CNC Mortise & Tenon for Miter Door:The Model "3450" CNC Mortise and Tenon Miter Machine is a 4-zone machine designed to accept pre-moulded material, cut a 45° miter and mortise or tenon the part to produce a hidden joint mitered door. -- Utilizing patented high precision ball screws to drive each axis, the machine is able to provide an exact tolerance every time. -- "UMTPro" software can be customized for cutting different shapes and... more
6
Homag Panel Sizing & Edgebanding Machine, KF 26/07/A3/25 Make : Homag Model : KF 26/07/A3/25 Serial# : 0-200-03-0005 Year of Mfg. : 2002 Condition : Used, very good conditions Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in in the US till now! Full Tech. Details and Documentation available upon request DESCRIPTION Fixed side on left, movable side on right. Double-Sided mac... more
1
Turning length 1500mm Turning diameter 600mm Bcyrvpxutm Spindle speeds 35-3000 rpm Input 40 hp Fitted with 40 Automatic Tool Change more
7
Dovetail Routing Machine Hoffmann PU2 32-100 HOFFMANN Bowm3ddw PU 2-32/100 (PU 2G) Pneumatic Dovetail Routing Machine Free-standing version with solid cast table and large working surface at a comfortable working height. With two routing units to produce two dovetail slots in sizes of W-1/2/3 Infinately adjustable router cross-centres from 32 mm to 100 mm. Year of construction : about year 2004 in good condition more
2

Table Type Boring and Milling Machine SCHARMANN FB 80

Mönchengladbach, GermanyGermany dealership location
6371 km
1961
used
spindle diameter:80 mm x-travel:1000 mm Tephbfcmc y-travel:710 mm faceplate diameter:500 mm spindle taper MT:5 total power requirement: kW weight of the machine ca.:12 t dimensions of the machine ca.:5,0 x 3,0 x 3,0 m 3-axes digital readout more


bundle mac...
daily

New machines via email!

Stay updated!
1

Sewing Machine Durkopp Adler N291

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
With V720 Control and Sewing Bench Bcyt9wmnpf more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. 7bwi7ixr McKnight-Miller 1E Saddel Seat ScooperFeed through , variable feed speed with a capacity of (4 to 12) seats per Min; -- 22" x 22" max. seat size and 2" max. seat thickness. 15 HP Main motor V-belted to 5,000 RPM arbor; 2 HP feed motor,(2) tandem feed chains with lugs feed the seat blank underneath the top cutter head which moves up & down with cam action to shape the seat profile; the high speed steel knives on the arbor are in the shape of the... more
6

Strapping machine CYKLOP ROT-NT 700 N

Krefeld, GermanyGermany dealership location
6365 km
1986
good (used)
Standart machine 100% functional now available 7zdkfshox more
3

Deburring Machine manutec r15E CNC

Monheim, GermanyGermany dealership location
6403 km
2015
used
diameter mm workpiece length mm work piece width mm Machining segment consisting of covering and manutec robot r15E, for deburring of gear boxes and columns Axes 1 to 6 are rotary axes. The axes 1 to 3 are the basic axes, the axes 4 to 6 are the orientation axes for the für den gripper or the tool, respectively. All 6 axes can be moved simultaneously coordinated. Yrszmo Equipment/Accessories: - Tool station - 2 pallet places - Various spindles: ESR350 spindle with suspension spring and... more
6

Animal bedding shaving machine MBM RHINO Chips 450

DRACHTEN, NetherlandsNetherlands dealership location
6264 km
2017
as good as new (ex-display)
Rhino Chips 450 wood shaving machine With this shaving machine you can make your own wood ships for example horse bedding and other animal bedding. Bczhfucs9r see also our video ! with 2 spiral cutterheads 450 mm and wood inlay hooper 950 x 450 mm The producing of the wooden chips is about 1 m3/hour, depending on the kind of wood and the dimensions of the pieces of wood Demo machine - same as new more
6
max. workpiece diameter 440 mm threading length 4000 mm max. module 12 min. module 0,5 max. wheel diameter 440 mm gear width 4000 mm no. of teeth to be hobbed 3 - 300 mm max. swing diameter 600 mm Slide cross Axial = 4000 mm dist. cutter spindle - workpiece spindle 50 / 316 mm diameter of hob 192 x 220 mm head swivability +/- 45 ° taper Morse 5 shifting 200 mm milling drive motor 22 kW hob turning speeds 80 - 340 U/min electrics - voltage/frequency 400 / 50 V/Hz control Sinumerik 840 D tot... more
1

Sewing Machine Durkopp Adler N291

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
With V720 Control and Sewing Bench Hpqge7mky more
1
Elect./Voltage: 380 V, 50/60 Cy, 3 Ph. Bbuzky7jtu BACCI TTFI Miter Door Cut, Drill and ShapeCabinet mitre door machine, cutting boring and moulding machine, designed for 45 degree mitre frame door production, with each cycle the parts are trimmed drilled and finger jointed,Features: -- The TTF1, single sided cutting-boring-moulding machine is equipped with: -- Hydraulic control of table stroke. -- Ball bushing and ground and hardened guides for the table movement. -- High precison cutt... more
4

Laminating machine STENEMANN LOTUS 102

Krefeld, GermanyGermany dealership location
6365 km
1996
good (used)
• Investors Mabeg M3 up to 1400 arc length • Performance 11000 sheets / hour • Bow spin-off Mirus IA 102 format 1000 × 1370 mm BJ. 1996 F3ydp7b more
3
x-travel:1230 mm y-travel:355 mm z-travel:440 mm total power requirement:12 kW table-size:1600 x 400 mm tool taper:SK 50 speeds:28 - 1400 U/min Xobmxvax feed - longitudinal/cross:16 - 2500 mm/min feeds Z-axis:12,5 - 1000 mm/min weight of the machine ca.:4,2 t dimensions of the machine ca.:1,9 x 4,0 x 2,2 m more
1

Jig Grinding Machine HAUSER 3 SMO

Mönchengladbach, GermanyGermany dealership location
6371 km
1968
used
x-travel:400 mm Dyo8y2u y-travel:250 mm workpiece height:500 mm grinding diameter:220 mm table surface area:600 x 320 mm throat:310 mm range of angles:12 ° grinding wheel stroke - vertical:110 mm stroke speeds:0 - 6 m/min grinding spindle speed:bis 50000 U/min peripheral speed:max. 35 m/sec capacity:ca. 7 kVA power capacity:6 kW weight of the machine ca.:2 t dimensions of the machine ca.:3 x 3 x 3 m rotary table d = 300 mm frequency changer more
1

Sewing Machine Durkopp Adler N291

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
With V720 Control and Sewing Bench Nf09h more
1
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph. Bbuzkpmd9t BACCI TTFI Miter Door Cut, Drill and Shape -- Cabinet mitre door machine, cutting boring and moulding machine, designed for 45 degree mitre frame door production, with each cycle the parts are trimmed drilled and finger jointed,Features: -- The TTF1, single sided cutting-boring-moulding machine is equipped with: -- - hydraulic control of table stroke. -- - Ball bushing and ground and hardened guides for the table movement. -- - High p... more
1
Used universal tool milling machine Fabr. AVIA, type C20 built in 1989 with 3-axis digital display HEIDENHAIN Positip machine comes from a training workshop technical data Table size / clamping surface 280 x 750 mm Table size vertical table 250 x 826 mm Verfahweg of x 400 / 420 mm Travel of the Y-axis 310 / 330 mm Traverse path of Z-axis 330 mm Spindle speeds vertical / horizontal 16 levels 56-1800 rpm. Spindle taper ISO 40 Quill stroke 80 mm Feed range all axles 16 levels of 11.2-350 mm... more
6

Internal Grinding Machine TRIPET TST 201

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1987
used
grinding diameter 3 - 150 mm Control TRIPET TST CNC grinding length 200 mm center height over slide 150 mm work piece spindle speed 75 - 1300 U/min grinding spindle speed 8000 - 150000 U/min Fixed number of revolutions when straightening 75 U/min dimensions 4800 x 3200 x 2150 mm weight ca. 4000 kg required power 10 - 15 kW Max. Movement of the longitudinal slide 480 mm Swivel range of the workpiece headstock +45 / -30 ° Workpiece spindle bore 40 mm X-axis resolution 0,00025 mm U-axis resolution... more
4
spindle diameter:70 mm x-travel:800 mm y-travel:800 mm z-axis:1200 mm table-size:1000 x 800 mm spindle taper: MT:5 spindle stroke:300 mm feeds:0,028 - 12 mm/min spindle turning speed range:7 - 1350 U/min faceplate diameter:500 mm faceplate speeds::7 - 135 spindle motor:5 kW voltage:500 V weight of the machine ca.:8 t Bqmbnjvk total power requirement:7 kW dimensions of the machine ca.:5 x 2,3 x 2,5 m The machine was used in a training school and generally overhauled in 2008! - facing head - ... more
1

Sewing Machine Durkopp Adler N291

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
With V720 Control and Sewing Bench Bcyt997tdg more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Bbuyzgh7vz STAR V MACHINERY SC-800 CROSS V-GROOVER: -- Specifications: 1-Spindle with: 7.5 HP - 3,600 RPM Motor, 30" max. crosscut cap., material thickness 1/4" - 1".Head up & down movement via pneumatic cylinder with linear rail & linear bearings; depth fine adjustment with special threaded adjustable unit. -- Positioning:Carriage cross-travel powered by 3 HP hydraulic motor (4 GPM), driven ball screw with linear rail & linear bearings; feed rate from ... more
3
Serial number: 107.53.98.054 22-Fach tool changer Gz87oprz8 3D-sensor for measuring tool Control: HEIDENHAIN TNC 426 Travel (X, Y, Z): 900, 630, 500 mm more
6

VERTICAL BALANCING MACHINE HOFMANN TYPE EVD 30.1 (90.4)

West Lothian EH54 9HW, United KingdomUnited Kingdom
5581 km
1997
good condition (used)
1997, s/n 6/01/610003, Max weight of component – 18kgs, Max dia of component 520mm, maximum depth of component 400mm, Measure range 0.1 to 1,000g, speed range, 60 to 6,000rpm. Complete with Ixion drill for drilling of balancing hole. Bczkw3bm2n more
6
grinding diameter max. 100 mm regulating wheel width (350x) 250 mm max. width of grinding wheel (650x) 250 mm Control Siemens 840D max. workpiece diameter 100 mm Mw2st min. workpiece diameter 1,5 mm workpiece length - max. 245 mm grinding motor 22 kW drive control wheel 5,7 kW regulating wheel turning speeds 5 - 600 (900) U/min grinding wheel adjustment 0,0001 mm total power requirement 56 kW weight of the machine ca. 13 t dimensions of the machine ca. 5,7 x 3,3 x 2,3 m Centerless grinding ... more
1

Sewing Machine Durkopp Adler N291

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
With V720 Control and Sewing Bench Bcyt7ar003 more
Nf7a2 round continuous feeder RI-55 4 fold pockets + gatefold pocket noise reduction hood more
1

Folding Machine V-TRADE SBH 2535 G/200

Witten, GermanyGermany dealership location
6419 km
2015
used
sheet width:2540 mm plate thickness:3,5 mm distance between columns: mm back stop - adjustable:800 mm Daylight opening:200 mm V2thvr bending angle max.:135 ° more
12
We offer you, a used hobbing machine from the manufacturer Staeheley. Bahagd Built in 1958 Wheel diameter - 600 mm Wheel width 280 mm Module - up to 5 Shaft height 20 / 390 mm Round table diameter 420 mm Table bore 80 mm Taper MK 4 Milling cutter speeds 53-200 RPM Machine weight approx. 2.60 t Space requirement approx. 2.20 x 1.50 x 2.00 m Incl. removable wheels and original manual with installation plan, wheel translation etc. Machine plays demonstration ready for us in the ... more
5

Herringbone Shaping Machine SYKES 5 E

Monheim, GermanyGermany dealership location
6405 km
used
total power requirement 10 kW max. wheel diameter 1600 mm gear width 457 mm max. module 12,5 min. module 2 spindle bore 222 mm stroke 15-120 Hub/min roll feed 0.3 - 0.84 mm/min down feeds mm/Hub electrics - voltage/frequency 380 / 50 V/Hz weight of the machine ca. 18,9 t dimensions of the machine ca. m EXTERNAL GEARS: Blank diameter:- Max 63" 1600 mm Min 0 0 Face width, double helical 0 - 18" 0 - 457 mm Face width, spur or single helical 0 - 10" 0 - 254 mm Bbic9xhouf INTERNAL GEARS: ... more
5

Bed Type Milling Machine - Universal FPT LEM 933

Mönchengladbach, GermanyGermany dealership location
6371 km
1994
used
x-travel:1500 mm y-travel:1200 mm z-travel:1200 mm Table area:2000 x 920 mm Bbow3bwlhe feeds longditudinal/cross/vertical:1 - 4000 mm/min rapid traverse:12000 mm/min spindle taper ISO:50 spindle motor:27 kW spindle turning speed range:10 - 4000 U/min weight of the machine ca.:15,5 t total power requirement:46 kW dimensions of the machine ca.:6,5 x 5,5 x 3,5 m Machine equipped with HEIDENHAIN TNC 407 - 2-axis indexable head - coolant attachment with through spindle coolant and complete splash ... more
1

Sewing Machine Durkopp Adler N291

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
With V720 Control and Sewing Bench Bcytzxu38r more
4
Maximum blade diameter: 400 mm Maximum section length through multiple Hub: 1,800 mm Saw blade runs and cuts also still reasonable, however lack of guards and ads, therefore selling as a parts carrier Ls92xmb2 Cutting capacity at 45 degrees: round 130 mm Cutting capacity at 45 degrees: 160 x 80 mm Cutting capacity at 45 degrees: rectangular 110 x 110 mm Cutting capacity at 90 degrees: round 130 mm Cutting capacity at 90 degrees: 210 x 80 mm Cutting capacity at 90 degrees... more
5
PQC KHS-AI KMS PDC-Lite 16.000 s/h Version FAPC Ink unit temperature control Autom. ink roller wash-up device Autom. blanket wash-up device Autom. impression cylinder wash-up device High-pile delivery Sep. coating unit with chamber blade system IR-Dryer Extended delivery Steelplate in delivery Steelplate in feeder Bixvlspw Powder sprayer Approx. 119 mio. impr. Available: on request more
6
We offer you, an almost unused bending machine from the manufacturer Kramer. Ba0wsvadwv The machine went for a job and was stored since! Machine runs flawlessly. Bending length: 2500 mm Roll diameter 140 mm Material thickness: 2, 5 mm Weight: 2T The machine can be performed live with us in the camp. Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, sale. Please enter your full cont... more
5

Laser Cutting Machine AMADA LCG-3015 AJ

Kaiserslautern, GermanyGermany
6535 km
2014
excellent (used)
OVERVIEW: Brand: AMADA Model: LCG-3015 AJ Application type: Laser Cutting Machine type: Laser Cutting Machine Availability: 01/09/2018 Construction year: 2014 Production hours: 12514 Location: Hungary Origin country: Japan GENERAL DATA: Measurements width: 6200 mm Measurements depth: 10300 mm Measurements height: 2350 mm Machine weight: 8000 kg MAIN DRIVE: Laser brand: AMADA AJ2000 Laser power: 2.1 kW Laser type: Fiber CONTROL UNIT: Brand: AMADA Model: AMNC-F31 MO... more
5
grinding wheel weight max. 150 grinding wheel diameter 400 mm grinding wheel width max. 50 Itf2jjd for grinding wheels between 400-450 mm Durchm. weight 21,3 kg range L-W-H 0,76 x 0,45 x 0,59 mm Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1

Sewing Machine Durkopp Adler N291

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
With V720 Control and Sewing Bench Bcyuc9jllq more
4
Tool holder MK 4 Projection up to 1000 mm Bcrqdcij0p Car. Feed Motor-driven height adjustment more
5
spindle passage 79 mm Control Siemens 840D turning diameter 250 mm swing diameter 320 mm turning height 250 mm rapid traverse X-axis 100 m/min spindle turning speed range 20-5000 U/min main drive motor 21 kW rapid traverse Z-axis 45 m/min Bdh0bwui weight of the machine ca. ca. 7.5 t more
6

Milling Machine - Vertical LAGUN MC 1000

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1998
used
x-travel 1000 mm y-travel 500 mm z-travel 510/111.5 mm control Heidenhain TNC 410 Bcoqz90soy weight of the machine ca. 6,3 t dimensions of the machine ca. 2240x2930x2750 mm more


bundle mac...
daily

New machines via email!

Stay updated!

to

to

Edit search
BUNDLE MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close