Used Burner for sale (649)

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg Iodpfsz Hngmsx Ap Dobc • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar Ibsdpfjz E S Hhsx Ap Djc • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Condition: used, Year of construction: 2023, operating pressure: 10 bar, Steam boiler Bosch Type: UL-S 5000 Year of manufacture: 2023 Iodpfx Apez Sy A Eo Djbc Max. capacity [kg/h]: 5000 Max. allowable pressure [bar(g)]: 10 Min./max. allowable temperature [°C]: 0 / 184 Total volume [l]: 9630 2. Economizer (ECO) Type: ECO 1 Year of manufacture: 2023 Max. thermal capacity [kW]: 187 3. Burner Fuel: Gas / natural gas N Max. permitted pressure upstream of safety shut-off valve: 500 mbar (gas) Manufacturer: Weishaupt Marking: CE-0085BU0359 Type: WM-G30/2-A ZM-3LN Standard(s) complied with: EN 12953-7:2011, EN 676:2020

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, with Dungs gas piping DN 50 Burner type: WM-G10/3-A Design: ZM-LN Year of manufacture: 2011 Ijdpfx Apszdku Ro Dobc Output: 125-900 kW

Condition: excellent (used), Year of construction: 2016, For sale: a functioning and very well-maintained gas burner, brand WEISHAUPT WM-G20 (2600 kW), with a DUNGS DN65 gas manifold. 1. WEISHAUPT WM - G30 (3800 kW); two units available. Isdpfx Ajzamgcep Dsbc - Output: 400 - 3800 kW - Design: ZM-LN - Year of manufacture: 2016

Condition: excellent (used), Year of construction: 2007, For sale are functional and very well-maintained gas burners from the Weishaupt G50 series – 5400 kW, including MULTIFLAM gas valve, manufactured in 200/. G50/1-B MULTIFLAM Output: 450 - 3500 kW Design: 3LN Iodszabnnspfx Ap Dsbc Year of manufacture: 2007

Year of construction: 1975, condition: excellent (used), Oil burner Weishaupt RL10. VZMDU Year of manufacture: 1975 We also speak Russian! Please arrange an inspection by phone. We prefer to sell to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. We will gladly purchase your used boiler or burner! Isdpfei Atf Eex Ap Djbc We will, of course, take care of all the formalities. Loading is possible.

Condition: excellent (used), Year of construction: 2001, For sale is a fully functional and very well-maintained gas burner from Weishaupt, model RGL40, including gas piping (Dungs DN); with control unit and burner control system; in TOP CONDITION. 1. Burner type: RGL20/1-B Ibjdpoy Urrzofx Ap Djc Output: 450 - 2550 kW Design: ZM Year of manufacture: 2001 Connection pressure: 15-500 mbar

Condition: excellent (used), Year of construction: 2023, Dual-fuel burner Elco 3980kw EKEVO 7.3600 GL Weishaupt Iodpowrlayofx Ap Dobc

Condition: excellent (used), Year of construction: 2005, For sale are functional and very well-maintained dual-fuel burners (oil/gas) from the Weishaupt brand, (1875 kW) complete with control cabinet and gas line (Dungs DN 65). 1. Weishaupt GL 30/2-A Model: TM-1LN Ibedpfowgk A Aox Ap Djc Year of manufacture: 2005 Output: 300-1875 kW 31-157 kg/h 2. For sale are functional and very well-maintained dual-fuel burners (oil/gas) from the Weishaupt brand, model RGL40/1-B (2550 kW), including gas valve, Dungs DN 65. Year of manufacture: 2001. Weishaupt RGL40/1-B (2550 kW) - Output: 450-2550 kW - 45-215 kg/h - Model: ZM - Connection pressure: 15-500 mbar

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. Ijdpfxstywzqj Ap Dobc 1 Chimney

Condition: good (used), Year of construction: 2004, For sale is a functional and very well-maintained oil burner from the brand Weishaupt, model L7T-1965kw. 1. Burner type: L7T Output: 320 - 1965 kW Ibodpjy Ut Dxjfx Ap Dec Heating oil: 27-165 kg/h Design: D Year of manufacture: 2004

Condition: used, Year of construction: 2014, Overview Complete 10 hl craft brewery around an Eco Brew Tech 10-20 HL steam-heated two-vessel brewhouse from 2014. One package from milling to bottling: malt mill, brewhouse with wort cooling and oxygenation, hot and cold water tanks, steam generator, three 20 hl unitanks, filtration, an atmospheric filler-capper monoblock, a self-adhesive labeller and a microchiller. 10 hl of cast wort per brew at 12.5 °P, up to 4 brews in 24 hours. Technical data - Brew length: 10 hl cast wort at 12.5 °P; 20 hl in 12 hours, up to 4 x 10 hl per 24 hours - Brewhouse: 2 vessels, AISI 304, steam-heated, PLC with touchscreen and recipe memory - Fermentation: 3 x 20 hl unitanks, AISI 304, 0.49 bar - Bottling: 800-1,000 bottles/h, crown cap - Year: 2014 (microchiller 2018) Scope of Delivery - Malt mill | Robix | ROPPI-1100 | two fluted rollers, adjustable and lockable gap, protective magnets, 1,100 kg/h, 4.8 kW, 400 V / 50 Hz - Brewhouse | Eco Brew Tech | 10-20 HL | mash/lauter tun 1,557 L gross with false bottom, grant, sparging and 1.1 kW bidirectional rake with variable speed; kettle/whirlpool 1,890 L gross with tangential inlet and bottom steam jacket; rock wool insulation, platform and stairs | 2014 - Wort pumps | 2 sanitary pumps for hot and cold wort, 2 kW and 3 kW - Water mixing station | hot and mains water, flow meter and in-line thermometer - Plate heat exchanger | AISI 316 plates, NBR gaskets, wort cooling with hot-water recovery - Wort oxygenation | in-line, porous stone, flow control valve, outlet thermometer - Hot water tank | Eco Brew Tech | HWT | 20 hl working (2,869 L gross), steam jacket, PT100 thermostat, 0.75 kW pump 80 L/min, 24 L expansion vessel | 2014 - Cold water tank | Eco Brew Tech | CWT | 20 hl working (2,869 L gross), glycol jacket, PT100 thermostat, 0.75 kW pump 80 L/min | 2014 - Steam generator | Thermindus | GV INSIEME | 150 kg steam/h, diesel burner, feed-water unit and boiler control panel | 2014 - Unitanks, 3 units | Eco Brew Tech | 20 hl working (2,731 L gross) each, AISI 304, 0.49 bar, 2 independent cooling jackets (side and cone), PT100, pressure gauge, safety valve, CIP spray ball | 2014 - Mixing tank | Eco Brew Tech | 2,200 L, AISI 304 | 2014 - Mobile pump on trolley | 1.5 kW, 200 L/min at approx. 15 m, AISI 316 pump, AISI 304 trolley, for CIP and beer transfer - Cartridge filter | AISI 304 housing, up to 2,000 L/h, cartridges not included - Process pump | EP MINI | 0.37 kW, 3/4" connection - Filler-capper monoblock | Idrotecnica | I8C | atmospheric filling, crown capping, 800-1,000 bottles/h | 2014 - Self-adhesive labeller | STS | S2/Z | automatic, 1,000 bottles/h, batch coder | 2014 - Microchiller | Keyter | KWF2009 | process cooling | 2018 Condition Ibodpfxoz Sk Aqo Ap Djc Used, still installed. Inspection on site is possible. Availability Immediately. Location: Spain.

Condition: used, Year of construction: 2012, VapoReal model by Real Forni, equipped with 12 doors. 220 cm. Ijdpfjy Dt S Iex Ap Dsbc Type: steam tube oven Brand: Real Forni Model: VapoReal / Vaporeal - 4 decks - 12 loading mouths

Year of construction: 2003, condition: good (used), Weishaupt gas burner Monarch Burner type G7/1-D Version ZMD Power 300 - 1750 KW Iedpfxjmdpcze Ap Dobc Including gas line ( gas fitting ) Burner was recently in operation

Condition: ready for operation (used), Year of construction: 2024, A mint condition gas burner Elco is available. Burner capacity range: 510kW-950kW, gas types: G20/G25/G31, emission class: 3, combustion controller: TCH 5xx, max. gas inlet pressure G20/G25/G31: 300mbar/300mbar/148mbar, operating time: approx. 4 months. Machine dimensions X/Y/Z: approx. 600mm/550mm/1200mm, weight: approx. 90kg. Documentation available. An on-site inspection is possible. Iedpfx Aoxa Eklep Debc

Condition: excellent (used), Year of construction: 2010, 1. Gas burner WEISHAUPT WM-G30/2-A --- 4100 kW, with DUNGS gas train DN65 Output: 450–4100 kW Version: ZM Year of manufacture: 2010 2. Gas burner WEISHAUPT G50/1-B - 4000 kW, with DUNGS gas train DN65 Output: 550–4000 kW Version: ZM-NR Ibsdpowg Hkcefx Ap Dsc Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2011, 1. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2011 Output: 110 - 1250 kW. Connection pressure: 15-500 mbar. 2. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2005 Output: 120 - 1250 kW. Connection pressure: 15-500 mbar. Ibsdpfxozaa Uas Ap Doc

Condition: excellent (used), Year of construction: 2006, For sale are functioning and very well-maintained gas burners, brand Weishaupt: Weishaupt WM G30-1800kw, with gas manifold DUNGS DN65 Weishaupt WM G20-1600kw, with gas line Dungs DN65 1. Weishaupt WM G30/2-A - Output: 300 - 1800 kW - Connection pressure: 15 - 500 mbar - Design: ZM-LN - Year of manufacture: 2006 2. Weishaupt WM G20/2-A - Output: 250 - 1600 kW - Connection pressure: 15 - 500 mbar Ibsdpfx Aewgkpiep Doc - Design: ZM-LN - Year of manufacture: 2008

Condition: used, Year of construction: 1989, functionality: fully functional, pressure: 13 bar, Used steam generator, fully equipped and housed in a container. Type: DF 1500 (Year of manufacture 1989) Burner: Weißhaupt (capable of operating on oil or gas; currently equipped for oil) New water treatment system installed in 2024 Fully installed within the container Price is net Location: Poland Container built in 2004. Ibedpfxeyx U Ige Ap Dec Please do not hesitate to contact us if you have any questions.

Condition: excellent (used), Year of construction: 2010, For sale is a functional and very well-maintained dual-fuel oil/gas burner from the ELCO kLÖCKNER brand, including gas piping (Dungs DN 65). 1. Burner type: EK 6.200 GL Output: 279 - 1710 kW Heating oil: 50-163 kg/h Year of manufacture: 2010 Connection pressure: 300 mbar Ibjdpsy Uuw Hsfx Ap Dsc

Condition: excellent (used), Year of construction: 2013, Saacke TEMINOX GLS 125-45 dual-fuel burner 10500kw, oil+gas. Year of manufacture 2013. Ijdpjvrkcnefx Ap Dobc

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, temperature: 250 °C, power: 30 kW (40.79 HP), Curing oven with two chambers (one programmable heat cycle per chamber)! Equipped with conveyor belt and cleanroom classification! TECHNICAL DETAILS Process area (minimum): 1,700 x 1,400 mm (2.40 m²) MACHINE DETAILS Electrical Data Main power supply: 3x400 V ±5%, 50 Hz ±5% Control voltage: 230 Vac 50 Hz and 24 Vdc Main fuse: 140 A Motor Output Circulating fan motor: 2.2 kW (2 units) Drive motor for vertical transport: 0.39 kW Drive motor for horizontal transport: 0.09 kW Heating Heating type: Electric with sealed tubular elements Output: 30 kW per chamber Temperature range: 50 °C to 250 °C Ijdpfx Apjyk Sd Us Debc EQUIPMENT Conveyor system Cleanroom classification

Year of construction: 2011, condition: excellent (used), Weishaupt gas burner, model G30/3A-5700kW, year of manufacture 2011. Available as new stock or as used equipment from companies that have ceased operations but were still in service until the end. Please arrange inspections by telephone only. We prefer to sell to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. We will, of course, handle all necessary formalities. Loading and shipping are possible. Ibedpsi Dw D Sefx Ap Doc

Condition: excellent (used), Year of construction: 2016, 1. For sale is a fully functional and very well-maintained gas burner from Weishaupt, model WM-G30/1-A. Burner type: WM-G30/1-A Output: 350 - 3100 kW Design: ZM Year of manufacture: 2016 - Delivery is possible upon request. Isdpfx Apohitrxs Debc - All technical data can be seen in the pictures. Preferably sold to dealers, commercial enterprises, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors.