Used Burning Cutting Table for sale (26,804)

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, table load: 12,000 kg, total height: 3,800 mm, total length: 8,800 mm, total width: 5,900 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, overall weight: 42,000 kg, Table type boring mill Fermat - WFT 13 CNC MACH-ID 9430 Make: Fermat Type: WFT 13 CNC Control: HeidenHain iTNC530 Year: 2015 X - Travel: 3000mm Y - Travel: 2000mm Z - Travel: 1500mm W - Travel: 700mm Table Length: 1800mm Table Width: 1600mm Table load: 12000 Speeds / ranges: 3000Rpm Power: 61kW Ram size: 300 x 300mm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 1-20000mm/min. Feed rate Y-Axis: 1-20000mm/min. Feed rate Z-Axis: 1-20000mm/min. Feed rate W-Axis: 1-20000mm/min. ATC Toolchanger: 30 Number of controlled axis:5 Length: 8800mm Width: 5900mm Fpedpfsyim I Rjx Afnjc Height: 3800mm Weight: 42002kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2006, condition: excellent (used), Type: Unicut 547 Serial number: 5435 Year of construction: 2006 Block size: max 1200 x 640 x 380 mm Cutting width: 680 mm Thickness: 10 - 60 mm Air pressure: 6 Bar, 500 L/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 3400 x 1300 x 2650 mm Weight: 2500 kg Type: Galan 930 Fedsk Twx Hepfx Afnspc Serial number: 5431 Year of construction: 2006 Product size: max 370 x 160 mm Product length: 6 - 130 mm Cutting set: 20 mm Belt width: 360 mm Air pressure: 6 Bar, 20 L/min. Power: 3 x 400V, 50Hz, 7kW Dimensions: 4350 x 1250 x 1700 mm Weight: 1000 kg

Condition: good (used), Thread cutting machine, pipe thread cutter Fodpfx Aeb A Iyasfnjpc -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: excellent (used), Year of construction: 2020, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Year: 2020 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Fpedpfx Afsyh U Ubensc Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, The HB 460 L is a semi-automatic horizontal band saw in the Horizontal Mitre Cutting Bandsaws category and part of the Semi-Auto Bandsaw product group. Designed for heavy cutting applications, it delivers precise cuts on steel, cast iron, and other materials with its robust dual-column construction and reduced vibrations that enhance accuracy and speed. This advanced model features infinitely variable cutting speeds from 20 to 100 m/min, a powerful, low-maintenance motor, and a standard hydraulic workpiece clamping system to ensure reliability and efficiency. With the HB 460 L, operators benefit from precise saw blade tension adjustments via a pressure gauge, a removable coolant reservoir for easy maintenance, and an optical sensor for automatic stroke height adjustment. The machine’s versatility extends to including miter cutting capabilities with a 45° swiveling vise, making it ideal for both sections and solid materials. For an optimal cutting experience with the Horizontal Mitre Cutting Bandsaws product group, request a quote for the HB 460 L today and see how KNUTH can enhance your machining operations. Fpedpfxeu Abvds Afnec

Condition: good (used), Year of construction: 2006, functionality: fully functional, spindle diameter 125 mm x-travel 3000 mm y-travel 2000 mm z-travel 1500 mm W-axis (spindle longitudinal) 600 mm table-size 1250 x 1600 mm table load capacity - central/maximum 5000 kg Control Heidenhain iTNC 530 tool taper ISO 60 spindle turning speed range 5 - 3000 U/min Fpsdpfxjyifnuo Afnoc spindle drive motor 37 kW max. torque on the spindle 1646 Nm transmission ratio 2 Working hours: - Machine on: 59.078 h - Autom. cycle: 24.207 h * CNC-control HEIDENHAIN iTNC 530 * Coolant equipment * Table B-axis, 360.000 positions

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser hours: 7,000 h, laser power: 4,000 W, Equipment: CE marking, cooling unit, dust extraction, fume extraction, Special equipment - Automatic sliding front door - Cabin lighting - Movable pendant control panel - FastLine Cell Fpjdpfx Ajyidpqjfnec - 2D cutting tables with support bars & drawers Standard description - Machine frame with Y-beam and integrated laser unit - Laser unit: CO2 laser TruFlow4000, high-frequency excited - Maintenance-free turbo radial blower - Mirror telescope - Cooling unit - Positioning laser diode - Laser power control - Logbook function - Drives: Maintenance-free three-phase servo motors - Lighting under the beam - Magnetic coupling for processing head - Head detection - AutoLasPlus - Pendant control panel - TFT color display - Teach panel - Network connection RJ 45 Processing methods: - Laser cutting - Dynamic cutting head (155 mm) - Cutting head (240 mm) - PierceLine

Condition: ready for operation (used), table length 800 mm table width 320 mm groove width 20 mm dimensions of the machine ca. 800 x 320 x 250 mm Fixed angle table for attachment to tool milling machine with water drainage. Machine dealer with own stock of 1600 m². Fodsumndbjpfx Afnspc

Condition: new, table diameter 800 mm table load 2 t swivelling range --> 95 Grad max. torque 1250 Nm table rotation speed 2 U/min Working height from to 550 - 1300 vertikal mm Working height from to 650 - 1400 horiz. mm total power requirement 2,53 kW weight of the machine ca. 930 kg dimensions of the machine ca. 1,85 x 1,66 m Fjdpfxok Rfwtj Afnepc Video available on our website. Electric 400 Volt Hand control panel Hydraulic-device Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Various sizes from 1250 - 18000 kg load capacity in the production program. Machine dealer with own stock of 1600 m².

Condition: new, weight max. in kg 2500 kg Working height minimal 350 mm Working height maximum 1850 mm max. torque 3000 Nm 0 1 U/min adjustment speed vertikal 560 mm/min vertical adjustment 1500 mm Fpsdpfx Afovw Du Uonec baseplate diameter 600 mm rotation movement 0,75 kW stroke drive 1,85 kW height of the plant 2505 mm weight 1160 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design, the column positioner can process very large components. Higher columns (+500/+1000/+1500 mm) for processing components with larger dimensions are available. Special equipment: Double-sided lifting drive, guide rails in 2 m segments, wireless handheld control unit, TCS program control, etc. Thanks to the movable columns, the length of the different workpieces can vary between 1 m and over 20 m. Depending on the weight and dimensions of the component, positioners with load capacities of max. 2,500 kg to max. 40,000 kg are available. Advantages: Improved Safety Proper Ergonomics Improved weld quality Cost savings and profit increase Welding/Assembly procedures repeatability Machine Features: Master and idler column with rotating mounting plates Pallet jacks for column lifting and relocating Servo-motor, ball screw and encoder control for Up & Down motion Servo-motor, gear reducer and encoder control for Rotation LCD display for positioning set up, safety thresholds setting and diagnostic Automatic load leveling Redundant safeties - servo motor brake, ball screw thread geometry and mechanical Stopper Low maintenance 240/480/600 Volt - 3 phase - 60 Hz In order to configure the system precisely to meet the requirements, we must obtain all relevant information about the workpieces to be processed for the manufacturer's technical office. There we have a list of questions for this purpose.

Condition: good (used), ⚙️ Mikron Gear Hobbing Machine Type 132-02 (M23) – Mikron is renowned for its robust construction and long-lasting performance in gear hobbing applications, making it an excellent solution for cutting spur gears, helical gears, and splines with reliable precision. Condition Used State Good Maximum diameter 100mm (4") Maximum length 100mm (4") Number of teeth 6-400 Maximum pitch in steel 15 D.P. 12 table revolutions Geometrically calibrated between 200 and 2,400 rpm Feed Horizontal or plunge cut Main motor 1.5 HP Coolant pump motor 0.1 HP Hydraulic system motor 0.1 HP Dimensions 1120x1120x1680mm Machine weight Fpodpfjxlabcsx Afnsc 500kg

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Currently still in production > Robust German engineering > Suitable for edging, cross-cutting, sizing, miter cutting, etc. > Dimensionally stable and self-supporting machine body constructed as a sturdy frame-welded design from thick-walled steel profiles, laser-machined steel sheet parts, and mechanically finished > Built on the machine body is a torsion-resistant, finely planed cast-iron table top > The robust and powerful saw unit, integrated in the machine stand, guarantees precise saw cuts > The complete saw spindle assembly is dynamically balanced, with double-guided swivel segments made of cast iron and dual column guidance for height adjustment, as well as the long, double ball bearing-mounted circular saw spindle for absolute smooth running > The double roller carriage runs smoothly and is maintenance-free. Precise and play-free movement over the full length, guided by hardened and ground prism guides with remote locking in 80 mm steps > Stable yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side > Cross slide stop with mm scale and telescopic extension, extendable to 3500 mm. Equipped with 2 robust, play-free, movable stop flaps and 1 end stop with support for long strips. The length stop can be used as an angle/miter stop continuously adjustable on both sides from 0° to 50° with mechanical length compensation. All common miter angles (15°, 22.5°, 30°, 45°) can be quickly set using a locking system. > Rip fence with a cutting width of 1030 mm to the right of the saw blade with fine adjustment, easily adjustable and fixable manually, dimension displayed via an easily readable mm scale on the adjustable rule carrier. > Table extension 1200 x 600 mm and table length extension 750 x 655 mm Fjdpfx Afeyig Ezonopc > Operation at the machine body > Electromotoric height and tilt adjustment via tip buttons > Saw blade tilt range from 0 – 47° > Digital displays for angle adjustment, cutting height, and speed > APA quick-release saw blade system > Main saw blade speed 3000/4000/5000/6000 rpm > Guard can be swung away to both sides, protective hood with interchangeable insert (wide/narrow) for saw blades up to Ø 450 mm > Push button control with electronic soft start (Start/Stop) > Electronic wear-free motor brake Technical Description > Cross slide stop extendable up to 3500 mm > Saw blade Ø 400 mm can be sunk below the table > Extraction port 120 mm on the machine body, 80 mm on the guard > Roller carriage, length and width stop profiles anodized > Machine body and swing arm powder-coated in anthracite RAL 7021, cover sheets available in 5 standard RAL colors > Cross slide galvanically zinc-plated > CE compliant, GS-certified, BG wood dust certified Cutting length 3450 mm, roller carriage length 3200 mm Max. cutting height 155 mm at 90°, 105 mm at 47° Cutting width, rip fence 1030 mm Max. saw blade Ø 450 mm Table size cast-iron top 1200 x 655 mm Plus table extension 750 x 655 mm Table width extension 1200 x 655 mm Table height 900 mm Motor power 5.5 kW (7.5 HP) Voltage 400 V / 50 Hz Space req...

Condition: used, Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Mechanical decoiler max. 1000kg Coil inner diameter 400/508mm Straightening machine with 9 straightening rollers and 2 feed rollers and film unwinder Fedevk D Alspfx Afnspc The offer is aimed exclusively at traders within the meaning of §14 BGB no sale to private customers!

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Fjdsvtcvijpfx Afnjpc Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Year of construction: 2023, condition: like new (used), functionality: fully functional, Work table AT 2000 with beech wood top and drawers Mobile baker's work table Beech worktop with rear gallery Drawer block on the left Right side with 2 storage shelves Stainless steel design Dimensions approx.: 2000 x 800 x 980 mm (W x D x H) Used unit, cleaned Fpedpfx Asxvkxyefnec Top sanded and newly oiled Option: Delivery service New castors / wheels

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Positioning table, rotary indexing table, 180° BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position - 2 manual index locking positions with release lever, with end stop damper - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Fpsdpfx Afoxf Uudensc Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition

Condition: new, cutting width max 610 mm Fpodpeyi Hthefx Afnoc Cutting height max 200 mm Saw blade diameter 650 mm Motor output 11 kW

Condition: excellent (used), Year of construction: 2005, Polar 78 XT high-speed cutter - Year of manufacture: 2005 - Cutting width: 78 cm Fsdpfx Afeyit Nconopc - with light barriers - with air table - Touchscreen color display

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm Fpsdpfeyg E Skjx Afnsc AVAILABLE AND READY TO WORK

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition Fpodpfx Asyg E Ifjfnjc with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm with electrical cabinet AVAILABLE AND READY TO WORK

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Fodpfxeyi A Tdo Afnspc Storage location: Nattheim

Condition: used, machine/vehicle number: 14019, Rotor diameter: 800 mm Fpodpfsyiguvex Afnsc Rotor width: 600 mm Rotor knives: 6x16 Stator knives: Feed opening approx. 580x400 mm Drive motor: 75 kW

Condition: excellent (used), Year of construction: 2015, total power requirement 5,5 kW Fsdsyiu N Ropfx Afnopc

Condition: excellent (used), functionality: fully functional, operating hours: 7,665 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Amada, controller model: AMNC, laser type: CO₂ laser, laser source manufacturer: Amada, laser source model: AF4000E, laser hours: 5,109 h, laser power: 4,000 W, laser wavelength: 10,600 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 900 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 20 m/min, cutting speed: 20,000 mm/min, positioning speed: 100 m/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, workpiece weight (max.): 920 kg, power: 60 kW (81.58 HP), input voltage: 400 V, input current: 100 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 12,000 kg, total length: 9,000 mm, total width: 3,000 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, AMADA FO3015 4kW CO₂ Laser Cutting System – 2016 – Under Power for sale. Our laser has the complete integrated Amada laser system including the automatic loader, chiller, and extraction. This machine is currently in production and available for inspection. Please see the below technical details on this laser: • 4kW CO₂ • 3000 x 1500mm bed • Cutting capacity up to 20mm Fsdpfx Aoyi E Rrefnjpc • Cutting Hours: 5,109 • Operating Hours: 7,665 • Installation: 2016 We are open to providing photos and operational videos if requested. This will be available from the 23rd of March 2026.

Condition: good (used), Year of construction: 2011, functionality: fully functional, load capacity: 1,000 kg, Equipment: foot remote control, 3-axis height-adjustable welding positioner, load capacity approx. 1.5 tons ESAB PEMA TAB 1 T-STD Year of manufacture: 2013 All functions continuously adjustable, incl. hand and foot remote control. Fpsdpfx Asyi E Nnefnsc Technically and visually in excellent condition Table diameter: 900 mm Speed: 0.12 to 1.2 rpm Tabletop tilting range: 0 - 135° Boom tilting range: 45° Min. height: 450 mm Max. height: 1358 mm Total power requirement: 0.75 kW Max. current transmission: 800 amperes Dimensions: L x W x H: 2.1 m x 1.7 m x 1.6 m Weight: approx. 1000 kg